Air RAID!!! Can't even get off the ground!

I've had a Rorke 144G (4x36) drive array for months and haven't gotten it to capture a blasted thing since I got it. Every time I try, the little beach ball comes up and feezes everything. Can't even force quit. It's on a SCSI port, was partitioned and intialized with Apple Utilities, and works with other files, but I just can't get anything to happen when it's selected as a scratch disk. I'm using KONA LS. Any suggestions would be appreciated.

On the off chance this is an operational error, not a hardware one....
How are you capturing?
If using Capture Now, I can totally understand this problem. Try using Log & Capture.
Also, sometimes an incomplete or flawed Quicktime installation can cause similer problems.
you can do a good reinstall if you go to /library/receipts and delete file that says quicktime followed by an number (e.g. Quicktime701.pkg).
Repair your permissions using Disk Utility.
Download and run the quicktime installer.
Don't forget to repair permissions when you are done.
Cheers,
x
Do your part in supporting your fellow users. If a response has been Helpful to you or Solved your question, please mark it as such as an aid to other lost souls on the forum.
Also, don't forget to mark the thread Answered when you get enough information to close the thread.

Similar Messages

  • Premiere was working very well...and this week it will not even get off the boot up screen. Help?

    Premiere was working very well...and this week it will not even get off the boot up screen. Help?  I can log in on my laptop and it works fine but now it will not boot up on my desktop

    Moving this discussion to the Premiere Pro forum.
    The Coach what version of Premiere are you using?  Which operating system are you using?   Do you receive any specific errors when you try to open Premiere?

  • After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.

    After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.

    Try to reset the device:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the
    Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot
    normally.

  • Just made the pc to Mac jump. Can I connect my iPad to my Mac Mini via Bluetooth ...my current keyboard isn't connecting so I can't even get passed the password screen.

    Someone please help me connect my two devices together so that I don't have to purchase yet another item. Is there an app or something that would allow me to connect my Mac Mini to my iPad 2 wirelessly. I can't get passed the password screen because the wireless Keyboard will no longer connect to my Mac ...helllllppp .... I use it for both my iPad and my Mac mini....does that matter?

    If your iPad is close enough to your keyboard and Mini
    and if the iPad is merely in standby and not off, the
    connection to the iPad is still active.  Therefore, the
    keyboard will not connect to the Mini.
    If the iPad is far enough away to break the Bluetooth
    connection or you unpair from the iPad or you turn the
    iPad off, then the keyboard should connect just fine with the Mini.
    Most Bluetooth HID's (Human Interface Device) can only service
    one host at a time.  This is by design. 

  • Recently my iPhone 5 started rebooting to a messed up screen that would flash and show different bars and colors. I would either have to wait a bit to restart it and fix it. But now, it got to the point where I can't even get past the Apple splash screen

    My iphone 5 was working fine until it recently started to reboot to a messed up splash screen that would flash and have bars across it. When this happened, I couldn't do anything and had to restart it. I was able to start up the phone sometimes, until just recently. Everytime I started up the phone, it would load up the splash screen and then become distorted, flashy, and sometimes colorful and I could not use my phone. To try and fix this, I put it into recovery mode to do a factory restore, but iTunes can't even restore my phone. I even tried DFU mode.. Any help would be greatly appreciated!

    Check this support document for SIM issues http://support.apple.com/kb/TS4148. No one here is Apple, we are users like you. We can only recommend you try Apple again, unless you are close to an Apple store and can make an appointment to go in there.

  • HT201412 My ipad mini is stock on a message that the device had not been connected to icloud for two weeks. I cannot get rid of teh message. I can't even power off the device.

    My ipad mini is stock on icloud backup and i cannot even power it off. The message says "the ipad hasn't backed up in two weeks. Backup happens when ipad is plugged in". But nothing happpend when I plug it into power or the laptop.

    See if this helps.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I keep getting an error on my pc part way through the setup than it reverts it's self so I can't even get to the apps to sync any thing an help.

    I get an error when I run iCloud setup so I can't get into it on my windows 8 pc. the error comes up : the error during the installation of assembly "microsoft.VC80.CRT,type="win32",version="8.050727.6195",publickeytoken="1fc8b3 b9a1e8e3b",process or architecture="amb64". please refer to help nad support for more information. HRESULT:0x80070570.  Any clue to what that means and how to fix it?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • HT201441 if i can't contact the owner then what must i do? or if the owner have forgot the password and security answer to reset password and i can't even get into the phone to delete or reset it, what must i do?

    bought this phone long ago and take it to a place to set it up both security and iclouds, now i dont have access to this phone anymore and i took it to him, he said i would have wrote it down then and he don't even usersname and password for both store and icloud find my iphone, i don't have access to the phone, can anybody help me out plz.
    Emmarential.

    There is no way around activation lock, and no one can help you but the previous owner.  If he can't remember his Apple ID ("user name"), he can try to find it as explained here: http://support.apple.com/kb/HT5625.  After finding the ID, he can then reset the password if he doesn't remember it, as explained here: http://support.apple.com/kb/HT5787.  If he is unable or unwilling to do this, you will not be able to activate and use the phone.

  • W520 won't boot. Can't even get to the BIOS .... help!

    I have a 2 months old W520 factory settings. It has been acting up lately when powering up but after holding down the power button for 10 sec or so it would always start. However, that is not even working today.
    I took out the battery and plugged it in AC and tried to no avail. I also tried powering it up with battery alone and neither seems to work. So I can't turn on the **bleep** machine now to even see what version the bios is or anything for that matter. Please help .... thanks!
    Solved!
    Go to Solution.

    Hi, J,
        I feel your pain.
         It may be your system board is blooey, but we can try a few things before going to your local authorized Lenovo service center - or you may want to head over there right now:
    Lenovo Warranty Service Locally
        I had a minor warranty issue recently and a local provider turned my machine around in two hours (after the parts came in).
    If you want to mess around:
        Are you sure your power supply is ok? Is your battery charged?
        Have you tried unplugging everything from your machine (except for the AC adapter), including removing the disk drive, any usb devices etc.?
        Is your laptop screen completely dead? If so, you might try plugging in an external monitor, just to check.
        After that, you may also want to remove the keyboard, take out the backup battery, main battery etc and disconnect the AC overnight.
        Let me know how you fare.
                                                                               ZZ

  • A3 can't even get through the APTS tutorial on Places

    I don't use places, but I was doing the tutorial in the Apple Pro Training Series book because I have to re-certify. I've had to force quit three times, and I'm using the tiny little library that came with the book. I give up. I'm just going to read that section.
    Has anyone been able to make Places behave properly?
    DLS

    Yep that's why I moved there - I bought my 15in Ti, 12in Al, and 15in Al at that store. Only kidding I was working equally on west and east coast and fly american so it was either DFW or ORD - I hate the cold and I was already commuting to DFW every weekend so....
    DLS - have you tried a fresh library on your install? Tried any other installations with Places - I can tell you I have had no issues as you describe.
    RB
    Ps. the tests are a piece of cake I have never scored less than 98% and that was because the idiots that wrote that series of books explain something WRONG and I refuse to answer that question WRONG.

  • I gave my friend my ipad to borrow and he got the ios 6 betas without a developer accout without my permisstion it been fine for a few mouths but than today it said im not part of the iphone developer accout and i can't even get pass the lockscreen

    tryed restore doesn't work says can't reconize my ipad system can't back up can't reconize my apps pleace help cause i can't go to the apple store cause they won't since my friend did it illgelly    so pleace help me

    Have your friend fix it or buy you a new one like stedman said.
    This forum cannot help you. Google might provide some direction.

  • Tutorial error - can't get off the ground with OWB_DEMO

    I’m having problems with the OWB tutorials, just setting up the demo project.
    The OMBPLUS scripts fail while setting up the project environment.
    When I run loadall.tcl, it correctly creates the project, then dies running createlocs.tcl, on the first OMBINSTALL command. It complains that I have not defined ORACLE_HOME, which isn’t true – it’s defined in my environment. Here’s the output from the run:
    D:\OraHome_1\owb\bin\win32>call changecodepage
    OMB*Plus: Release 10.2.0.2.8
    Copyright (c) 2000, 2006, Oracle. All rights reserved.
    OMB+> cd d:\\newowbdemo\\
    OMB+> source loadall.tcl
    Project OWB_DEMO created
    Target user installation failed. ORACLE_HOME(or OWBCC_HOME for Clearcase) enviro
    nment variable is not set up yet. Please set up first.
    OMB+>
    Anybody else have this issue?

    I think this is a bug in OWB 10.2.0.2.8, a variable OWBCC_HOME must be set to the local Oracle home on windows in the "setowbenv.bat" file. Please see bug 5853639 on metalink for clarification.
    Cheers
    David

  • Recently downloaded new version of itunes, now i can't even get into the appstore to downlaod apps or anything.

    The iTunes store icon no longer appears in my itunes,

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Trying to get off the ground! Exception in thread "main" java.lang.NoClass

    I'm having difficulty setting up my system to cope with simple demo codes. Error Message at end
    System: Sony Vaio Laptop
    OS: Vista
    Java Components
    JAF-1.1.1
    JDK-1.6.0_03
    JRE-1.6.0_03
    JAVAMAIL-1.4.1
    I've edited my PATH to include contents of "JDK-1.6.0_03" so java, javac etc work from any directory
    I've edited my CLASSPATH so that from commandprompt I get the following message (using Set CLASSPATH)
    CLASSPATH=.;c:\java\;C:\Program Files\Java\javamail-1.4.1\mail.jar;C:\Program Files\Java\jaf-1.1.1\activation.jar;
    C:\Java\ is my working directory for all my codes, other directories are correct(copy and pasted)
    the following is the FrameDemo Code I'm trying to use, it appears to compile perfectly well
    package components;
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    /* FrameDemo.java requires no other files. */
    public class FrameDemo {
         * Create the GUI and show it.  For thread safety,
         * this method should be invoked from the
         * event-dispatching thread.
        private static void createAndShowGUI() {
            //Create and set up the window.
            JFrame frame = new JFrame("FrameDemo");
            frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            JLabel emptyLabel = new JLabel("");
            emptyLabel.setPreferredSize(new Dimension(175, 100));
            frame.getContentPane().add(emptyLabel, BorderLayout.CENTER);
            //Display the window.
            frame.pack();
            frame.setVisible(true);
        public static void main(String[] args) {
            //Schedule a job for the event-dispatching thread:
            //creating and showing this application's GUI.
            javax.swing.SwingUtilities.invokeLater(new Runnable() {
                public void run() {
                    createAndShowGUI();
    }the following is the complete command prompt dump
    Microsoft Windows [Version 6.0.6000]
    Copyright (c) 2006 Microsoft Corporation. All rights reserved.
    c:\java>java FrameDemo
    Exception in thread "main" java.lang.NoClassDefFoundError: FrameDemo (wrong name
    : components/FrameDemo)
    at java.lang.ClassLoader.defineClass1(Native Method)
    at java.lang.ClassLoader.defineClass(Unknown Source)
    at java.security.SecureClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.access$000(Unknown Source)
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    c:\java>
    I'd be very grateful for any help.....
    I'm guessing I'm missing something from the CLASSPATH but I've no clue what it is
    FrameDemo code is taken from Sun's own Swing Tutorial so I'm pretty sure the code is fine
    Edited by: Dioxin on Nov 16, 2007 6:29 AM

    ok NOW IT GETS WORSE!
    currently I have FrameDemo,java and FrameDemo.class in c:\java
    I create C:\Java\components
    then java components.FrameDemo from c:\java
    produces
    Exception in thread "main" java.lang.NoClassDefFoundError: components/FrameDemo
    if I put FrameDemo.java into the components directory and then compile it
    I get FrameDemo.class AND FrameDemo$1.class
    and when I then java components.FrameDemo from c:\java
    it works....
    when I remove the first line of code from my original FrameDemo.Java
    and then recompile it....I get FrameDemo.class AND FrameDemo$1.class in c:\Java
    Java FrameDemo
    works perfectly
    the line
    package components;was screwing me over
    I'm a little confused why I need FrameDemo$1.class though.....
    Cheers for all the responses
    Dioxin

  • Hi, I have installed VMware Fusion to switch to windows. The game I played is now frozen and even turning off the computer does not get it out of the 'frozen' mode. What can I do?

    Hi, I have installed VMware Fusion to switch between Mac and Windows. It worked fine until I installed and played a game (Atlantis). Now the screen in frozen and even turning off the computer does not help. Does anybody have an idea what to do?

    Try the remaining items of:
    iOS: Not responding or does not turn on
    If not successful, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

Maybe you are looking for