Air's left usb doesn't work!

When I use usb mouse or removable disk, nothing happened on my air or on my plants. But when I insert my ipod to the left usb, itunes told me I have used usb 1.1.
By the way, the right usb is all right.
thanks~

Thanks for your answer. I think perhaps the problem is associated with software because air can recognize my ipod. I wanna know if I go to AASP, does it cost a lot of time?
Difficult question to answer. Let see if you have been doing the SMC reset correctly, I'd also recommend doing a PRAM reset. The reason I bring up the SMC is each Mac model has a different sequence. Here is the correct process for a MBA.
SMC RESET
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Similar Messages

Lenovo s650 won't boot, USB doesn't work

I bought this phone and installed a root app. I may delete some system files with root app. Since that, the phone won't boot. I tried Smart Phone Flash Tool but the Firmware won't be updated as USB doesn't work. What can I do at this point? Please help!

Hi fiddlehead53 (my fingers hurt)
What Windows version are you using?
For XP/Vista/7 Follow message 7 of > https://forums.lenovo.com/t5/Lenovo-Phones/Lenove-S650-sound-issue/m-p/1413747/highlight/true#M3660
PS.''MT65xx Preloader'' will pop just for a short time so you'll have to be quick !
Let me know how it goes.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

My iPod's headphone jack isn't working anymore, when i put my headphones in , the left l, My iPod's headphone jack isn't working anymore, when i put my headphones in , the left earphone doesn't work. Does anyone know if this can be fixed ?

My iPod nano 3rd generation headphone jack isn't working anymore, when i put my headphones in , the left earphone doesn't work. Does anyone know if this can be fixed ?

Hi Mr.Acevedo329!
I have an article here for you that can help you troubleshoot the issues you are experiencing. That article can be found right here:
iPod troubleshooting basics and service FAQ
http://support.apple.com/kb/ts1382
Specifically, you will want to take note of this section:
The headphones don't work
If your iPod's headphones don't work or have static or garbled audio, try connecting them to any other 3.5 mm stereo headphone jack, like the one on your computer. If the issue with the headphones persists, replace them. For an iPod under warranty, you can order a replacement online. Otherwise, check out the cool headphones at the Apple Online Store. If the issue appears to be with the iPod, try resetting it. If that doesn't work, then restore iPod with the latest iPod software using iTunes 7 or later.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

New keyboard usb doesn't work on xos 10.6.8

My new mac keyboard usb doesn't work properly on osX 10.6.8 although it says on the box that it works with it.
I follow the instructions of Software update but it does not recognize it when I try at System Preferences > Keyboard.
Any help?

Thank you.
Brand new Apple Keyboard connected via USB working as simple keybard but not recognised or unabled to configure it.

Left Click doesn't work in Hotmail or Yahoo

I was running low on disk space and my IT dept said they deleted some "temporary files". Whatever they did hosed IE so that it reverted from v8 to v7. They redid the IE upgrade and installed a bunch of updates from MS and upgraded Java, but I'm still having a problem in FF. Most sites are fine, but when I go to Yahoo or Hotmail email, left click doesn't work. I've tried uninstalling/reinstalling FF. I've tried running FF in safe mode and reinstalling some of the plugins that I thought might possibly have an effect. I still can't get it to work. I've used some of the web dev tools in FF, all I can find out is some of the errors that are reported on page load. On Hotmail, one is that a var called "JQuery" is undefined, among others.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Macbook air adoble flash player doesn't work after installation

macbook air adobe flash player doesn't work after installation

If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 7. Back up all data before making any changes.
Step 1
You might have to log out or reboot before a Flash update takes effect.
Step 2
In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
If you get a warning of a "blocked" or "outdated" plug-in, then from the menu bar select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch the browser.
If the warning persists, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 6
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 7
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 8
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.

Left USB port only works when entering BIOS

Hi all -- I have a Toshiba Satellite C855D-S5106, the LEFT USB port only works when I enter the BIOS at boot-time. If I disconnect the drive, i.e. eject it and then remove it, the port stops working. The other two ports at the right work fine. I've tested this with known good flash drives and Kensington USB trackball that work fine on four other computers, and the other two USB ports. I'm thinking its software/BIOS because hardware would fail intermittently, I could not get the port to work if there was a failing connection. As stated, this work-around succeeds EVERY time. I have not upgraded the bios. Has anyone had this problem?

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
- Peter

Air Stream 1200 USB modem not work in yosemite

my Air Stream 1200 USB modem not work in yosemite but it work in Windows pc.

May be there is an update available. Contact Air Stream.

IPhone 5 contacts local sync via usb doesn't work - updated

Syncing an iPhone 5, AT&T 64GB, with Macbook Air 11" mid-2011, 1.8GHz / 4GB.
OS X 10.10.2; iTunes 12.1.0.50; iOS 8.1.3.
I am trying to sync my contacts from my OS X Contacts App to my iPhone 5 via USB. The contacts do not sync. The contacts are local, "on my mac". I am using a usb cable through iTunes.
The iPhone 5 was just restored by Apple Configurator, set up as new iPhone, and is supervised by the MacBook Air.
I am also synchronizing my local Calendars from the OS X Calendar app; these transfer just fine. This makes me think it is probably not to do with the entire setup of the iPhone, i.e. that it is managed by apple configurator, since some of the sync works correctly.
Under "info" in the iTunes sync dialog, I have selected the "sync contacts" and "all contacts" and "sync calendars" and "all calendars" options.
Interestingly, while the Calendars sync options displays options of "selected calendars" and a list of my calendars available to sync, the Contacts section "selected groups" is grayed out. I have one group in Contacts, and it does not show up by name for "selected groups". Instead, the area where groups should be listed for selection is empty. Perhaps iTunes does not have access to my local contacts? It is not listed under apps with access to my contacts under security and privacy, and it has not requested access to my contacts.
I created a fake contact on the phone and synced it with iTunes. I then turned off contact syncing in iTunes and told it to remove previously synced contacts. The fake contact disappeared. When I turned contact syncing on again, the contact was again pushed to the phone. However, the fake contact did not appear at any point in the OS X Contacts App, and none of my OS X Contacts appeared on my phone -- only the fake contact I had created on my phone and then synced with iTunes.
I also created a (different) fake contact in OS X Contacts. iTunes sync did not transfer this contact (or any others) from OS X Contacts to iPhone.
SUMMARY:
- syncing iPhone 5 via USB with iTunes
- Calendar sync works
- Contacts sync doesn't work
- iTunes appears to have no communication with the OS X Contacts app; in system prefs > security and privacy > privacy > contacts, Pages and Word have access to Contacts, but iTunes is not listed. iTunes Contacts sync "selected groups" does not display my OS X Contacts group names.
- Contacts created on iPhone sync back to iTunes and are restored back to the iPhone if deleted and resynced.
- Contacts created on iPhone do not sync back to OS X Contacts; Contacts in OS X Contacts do not sync to iPhone.
(apologies for premature posting to "Using iPhone"; I accidentally submitted and now can't delete or edit).

Here's the resolution: I went to my local Apple store and spoke to the guy. After some discussion it turned out that one of the staff had had a similar problem. He suggested this course and I can report that it seems to work. So, (1) open your system preferences and then the print & fax setting and delete the printer in question (2) disconnect the USB between the printer and the TimeCapsule (3) shut everything down and turn off power to your modem, your TimeCapsule and your whole system (4) power on each item in its normal sequence (5) wait for your iMac to complete its boot-up, (6) re-connect the USB between the printer and the TimeCapsule (7) open system preferences and search for and install the relevant printer (8) try printing.
This is hardly elegant, but it worked. I am told (by the same Apple store) that hitting the "reset" button in the TimeCapsule might also work. If this is intuitive or obvious to anyone else then my compliments to them ...
Cheers
OzHutz

HP Pavilion G6-2146sl left USB ports not working

Hi, I have an HP Pavilion G6-2146sl with Windows 7 Ultimate x64... my problem is that the two left USB ports stopped to work properly: for example, when I insert an USB flash drive it turns on but it's not recognized by Windows. The only port wich works is the one on the right of the laptop. I've tried to do a driver search, but Windows doesn't find any driver. Here's a screen of my Windows device management:
Thank you in advance for your help and sorry for my bad English, I'm Italian.
This question was solved.
View Solution.

Thank you, solved!

Air browser: djvu plugin doesn't work

Hello,
I am building a custom air browser for my company using the HTML component.
It's working great in general but my company makes extensive use of the djvu technology for online image viewing.
Problem: the djvu plugin doesn't work on the air browser. After installing the last version (6.1.4) of the plugin it keeps saying it's necessary to install the plugin. (it works ok with the other browsers, also with google chrome).
Has anybody ever met a similar problem?
thanks in advance
marco

Hi Marco,
unless something changed between versions documented limitations include:
- support for only PDF plugin (version 8.1 or later) - with api to check availability at runtime if it is available on machine
- support for Flash plugin (without external dependency)
So other plugins are not supported:
http://livedocs.adobe.com/flex/3/html/help.html?content=AboutHTMLEnvironment_2.html
regards,
Peter

Why reloading pure asset SWF with AIR sdk 3.6+ doesn't work?

Hi, I posted this in the AIR beta channel, but I think it suits better here... I'm sorry for double posting.
Hi,
I have a game targeting iOS using AIR sdk that needs to load many swf assets from the disk (packaged with the game). When using AIR sdk 3.5, everything runs just fine. When upgrading the sdk to 3.6 or later (-swf-version=19, 20, 21), we ran into the following problems:
1) The packaging time (making the ipa file for iOS) passes from 15 minutes to 40+ minutes.
2) The game can't load any swf twice (ie. reload a swf).
The first problem is not a big deal. We only have to wait a little bit more. Our guess is that is has to do with new feature introduced by the sdk 3.6, which will go through all packaged secondary swfs and remove the code from it, and since we have lot of swf assets, it takes more time.
The second problem is way more serious, as I have to be able to reload assets according to player's action. Since we have a ton of assets, I can't keep them all in the memory as we could quickly run out of memory.
I know that there's a documented limitation of sdk 3.6 which states:
In AIR apps on iOS running in AOT mode there is a problem when a SWF is reloaded. Therefore reloading a SWF will not be allowed for AIR apps for iOS in AOT mode and attempting to do so will result in following error:
Error 3764: Reloading a SWF is not supported on this operating system
It also says that "Reloading of pure asset SWFs will work with AIR 3.7". However, that's not true, since all my assets are pure asset SWF without any code inside. It won't work, even with AIR 3.8.
While searching on the internet, I came across a forum post that says that the only way to know if a swf is a pure asset swf, is by using swfdump.exe, and searching for the DoABC2 tag. I did it, and effectively, DoABC2 tag was there, but empty.
So my first observation is that:
- Pure asset SWF file containing empty DoABC2 tag can be reloaded using AIR SDK 3.5
- Pure asset SWF file containing empty DoABC2 tag can't be reloaded using AIR SDK 3.6+
It seems to me that AIR SDK 3.6+ doesn't care if the tag is empty or not. If it is there, then it's not ok.
Then I wanted to know why my SWFs have this empty tag. After lot of tests, it turns out that it is because I am using jsfl to automate the export of assets from a FLA file. And there comes my second observation:
- When exporting a swf without code from Flash IDE (Ctrl+Alt+Shift+S), there's no empty DoABC2 tag.
- When exporting a swf from the Flash IDE's library (right click on the library Movieclip -> Export Flash movie...), empty DoABC2 tag is automatically inserted.
Unfortunately, my jsfl script uses thee same Library export functionality, and it produces the same "contaminated" swf. Why doesn't it produce the same SWF from both ways of export? I have no idea.
In the perfect world, the AIR SDK would not only look for the DoABC2 tag, but it should check whether if there's code inside. Also, Flash should use the same export process disregarding if it is being called from the IDE or the Library, and not inserting empty DoABC2 tag when there's no code.
As for now, I can't find any workaround to solve my problem. That means that I'm stuck with swf-version=18, and I can't benefit from all the cool features such as rectangle textures, new Context3DTextureFormat etc.
If anyone has a solution, or simply pointing out what I'm doing wrong here, please share it.
Thanks for reading.
Iojeirg

Hi makc3d,
Thanks for the response. After all that time I started losing hope.
I would not say that the abvious solution is to remove the tag. I think it should not be put there in the first place if there's no code at all. Moreover, this only happens when exporting a MC from the Library, and it works just fine when exporting normally (publish). It seems more like a bug than an expected behaviour.
Also, AIR should check for actual code in this tag instead of relying only on the tag itself.
Your solution is a nice workaround, and I will certainly try that out. But as I said, it will not fix the original bug, it will only patch it later on in the process.

Terratec dmx 6fire usb doesn't work on my mb pro 13 i5 2011 please help!

After installation driver of my soundcard terratec dmx 6fire usb on my mb soundcard doesn't work. But on mb pro 15' i5 2010 it's work's good. I think the problem is in the new sandy bridge chipset. If anybody have same equipment please help.

Thank to Terratec support for Help. My problem is solved. Now i can mixing with my soundcard terratec 6fire usb. Sound is good!
Answer of support terratec:is your Mac OS working in 32 bit or 64 bit mode ? The DMX 6Fire just work on
32 bit..
Normaly this can be the only reason, when you say, that the device works on
another Mac system without problems.
Also with the installation there is nothing you can do wrong. The device
must work, when you just have connected it via USB to the Mac. The DMX 6Fire
USB software is just installing the additional ControlPanel for the DMX.
All new macbook pro works at 64 bit mode at default. I change mode to 32 bit of my macbook pro type command in terminal :sudo systemsetup -setkernelbootarchitecture i386.
Nowi work in 32 bit mode and my soundcard works too Thank you for Help terratec support

USB doesn't work on my Macbook Pro

Hey guys ! So I very like taking pictures and stuffs.. so I decide to buy a Macbook Pro ( 10.7.5 ) to make my picture more beautiful But it's not turn easy like I thought. All the usb I tried didn't work on my macbook ! I don't know why but just my HTC phone or the iPod work, the Nikon or Fujifilm don't work at all. First, I socket my usb and like usually, I click " Go " then " Computer ". I don't see anything like Nikon or Fujima on the devices things.. So that means I cant see my pictures on my macbook I am very disappointed about this. I hope you guys can find solutions for me. Thank you very much, good day <3

Hello,
I didn't download anything It just didn't show up in " Devices ". And yes I have, they said something about Mac doesn't work with Nikon or stuffs, just only with the Sony?? Is that true ?
Thanks for help.

Booting BIOS from USB doesn't work (890FXA-GD70)

Hi all,
in case of BIOS crash, recent MSI motherboards should be able to boot using a BIOS provided from an USB pendrive. I have tested this function by calling it directly by BIOS option, but it fails after BIOS is loaded getting a blank screen (debug code: 09) or the monitor off (debug code: 31). Does any of you know whether the problem is fixable or any hints? Is it working to you?
890FXA-GD70 (either BIOS 1.0 and 1.6)
Verbarim Store'n' go 4GB USB pendrive (tested with FAT32, FAT16 formats, partitions smaller, bigger... nothing)
BIOS save function doesn't work as well. Some bytes are different comparing the saved file to original one.

Quote from: Svet on 28-October-10, 21:37:53
it's probably m-flash issue, what's current bios version installed?
Yes, you can say: "Flash your BIOS to the last version released some days ago, and retry", but that is the last chance for clear reasons. The problem hasn't been fixed flashing from 1.0 to 1.6, and I guess likely this code with the bug is in non flashable part of BIOS.
I wonder whether Boot 2nd BIOS from USB Drive (or Backup BIOS to USB Drive) is working for someone, it looks impossible it is entirely broken...

Air's left usb doesn't work!

Similar Messages

Maybe you are looking for