AIR-SAP1602I After convert to LAP, No radio interface
Hello,
Our AIR-SAP1602I is running ap1g2-k9w7-tar.152-4.JB6.tar and working normally.
Now, we covert AIR-SAP1602I from autonomous to lightweight which is running ap1g2-rcvk9w8-tar.152-4.JB6.tar to join C3850. (It will be joined then not-joined repeatedly)
After converting, we compare AIR-SAP1602I to another AIR-CAP1602I (It's working perfect with C3850 at this present) and find something strange via "show version" and "show capwap client rcb"
Can someone tell us how to solve this problems, thanks !!!
AIR-CAP1602I
Last reset from power-on
LWAPP image version 10.1.140.0
1 Gigabit Ethernet interface
2 802.11 Radios
AdminState : ADMIN_ENABLED
SwVer : 10.1.140.0
NumFilledSlots : 2
AIR-SAP1602I
Last reset from power-on
LWAPP image version 7.6.100.0
1 Gigabit Ethernet interface
------> No show:2 802.11 Radios
AdminState : ADMIN_ENABLED
SwVer : 7.6.100.0
NumFilledSlots : 0
Can you test this with using full lightweight image (ap1g2-k9w8-tar.152-4.JB6.tar) or different recovery image (ap1g2-rcvk9w8-tar.152-4.JB5.tar). to see the problem is persistent.
HTH
Rasika
**** Pls rate all useful responses ***
Similar Messages
-
Slow wifi on iPad Air after converting to iOS8
I am experiencing painfully slow wifi response on my iPad Air after converting to iOS8. I tried disabling the WiFi Networking setting under System Services and even did a "Reset Network Settings". All to no avail.
I changed the DNS settings on the iPad Air Wi-Fi settings to Google DNS 8.8.8.8
It helped but this morning I've noticed Safari webpage not opening...
Worth a try,video see here: http://youtu.be/XYeYLUn9nj0 -
Conversion of an AIR-AP1120B from autonomous to LAP
Does anyone know if it's possible to convert the AIR-AP1120B from autonomous to LAP?
Hi Federico,
Sadly, the 1120 with "B" Radio is not supported :(
Support for the 1121 was added in WLC version 4.0.155.0 Have a look at these related docs;
Software release 4.0.155.0 New Features
LWAPP for Cisco Aironet 1100 Series Access Points (802.11g radio only) Allows the Cisco Aironet 1100 Series Access Point to be upgraded from autonomous access point mode to lightweight mode using the autonomous to lightweight mode upgrade tool.
Note You must install software release 4.0.155.0 on the controller before connecting 1100 series access points to the controller.
http://www.cisco.com/en/US/products/ps6366/prod_release_note09186a00806e8989.html#wp147320
LWAPP Upgrade Tool Troubleshoot Tips
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072d9a1.shtml
Access points must run Cisco IOS Release 12.3(7)JA or later before you use the upgrade tool.
System Requirements
You can use the Autonomous to Lightweight Mode upgrade tool to install Cisco IOS Release 12.3(11)JX on these access points:
**All 1100 series access points containing MP21G (802.11g) radios
All 1130, 1230, and 1240 series access points
All modular 1200 series access points running Cisco IOS software and containing these supported radios:
802.11g: MP21G, MP31G
802.11a: AIR-RM21A-x-K9, AIR-RM22A-x-K9
All 1300 series access points in access point mode
http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/b311jx1.html
Cisco has released a free tool called the "Autonomous to Lightweight Mode Upgrade Tool" that allows selected Cisco Aironet autonomous access point models to be configured for lightweight mode operation.
The Autonomous to Lightweight Mode Upgrade Tool supports the following models:
Cisco Aironet 1240AG Series access points
Cisco Aironet 1230AG Series access points
Cisco Aironet 1200 Series access points that contain 802.11g (AIR-MP21G-x-K9) and/or second-generation 802.11a radios (AIR-RM21A-x-K9 or AIR-RM22A-x-K9)
Cisco Aironet 1130AG Series access points
**Cisco Aironet 1100 Series Access Points that contain 802.11g radios (AIR-AP1121G-x-K9)
Cisco Aironet 1300 Series Access Points/Bridges (AIR-BR1310G-x-K9 or AIR-BR1310G-x-K9-R). A Cisco Aironet 1300 Series operating in Lightweight Access Point Protocol (LWAPP) mode only operates as an access point. This series does not support LWAPP bridging mode.
The Autonomous to Lightweight Mode Upgrade Tool supports a process to migrate an autonomous access point from autonomous mode to lightweight mode. Unlike a VxWorks to Cisco IOS Software upgrade, this process is a Cisco IOS Software upgrade to the existing Cisco IOS Software image-not an operating system "swapout". In converted access points operating in lightweight mode, Cisco IOS Software continues to run on the access point, while LWAPP is used to communicate with a wireless LAN controller. Since LWAPP supports automatic access point configuration, there is no need to retain or convert the original autonomous Cisco IOS Software access point configuration.
http://www.cisco.com/en/US/netsol/ns340/ns394/ns348/ns337/networking_solutions_white_paper0900aecd804f1a23.shtml
Cisco Aironet Access Point Support for Lightweight Access Point Protocol
http://www.cisco.com/en/US/products/ps6521/prod_bulletin0900aecd80321a2c.html
Hope this helps!
Rob -
Setting a password for user access on AIR-SAP1602I-A-K9 running 15.2(2)JB2
I am trying to assist a group with setting up their AIR-SAP1602I-A-K9 stand alone WAPs. I would like to know how to set a password for clients to access the wireless network through these units. I have been spoiled with our controller based WLAN.
If you are doing it from the CLI
dot11 ssid Test
authentication open
authentication wpa version 2
wpa-psk ascii 0 "your key here"
Interface Dot111Radio 0|1
encryption mode ciphers aes-ccm
ssid Test
If you call a VLAN under the SSID, then you need to call a VLAN with the encryption statement under the radio interfaces.
If you are doing this from the GUI:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/12-4_10b_JA/configuration/guide/scg12410b/scg12410b-chap11-authtypes.html
HTH,
Steve -
my mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen. After logon, it takes very long time to load any application. pls help
OK. If you believe that.
When the disk is starting to die it can be bad for a moment and then be good for a while. If there was no problem while you were checking it of course it shows up good.
I tell you those are the signs of a disk that is about to die.
Allan -
Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?
i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings -
iTunes movies no longer sync from Dell laptop or MacBook Pros (both authorized devices) to iPhone 6s or iPad Air 2s after configured at Apple store yesterday. In the past I could see the movies in iTunes with the cover photo and sync to the other devices but now there is a listing a movies with no cover photos and in fact if I try to view the movie on the MacBook Pro it cannot be found unless I download it.
All I had to do was complain. I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store. I have no idea why.
-
Can't create hyperlinks after converting a Word document with Acrobat XI Pro
Hello,
Here's my problem.
I'm making a catalog document for my company.
The document that I'm converting to PDF is made on Office Word 2013 and it's a .docx format file.
I'm on Windows 8 and the latest version of Adobe Acrobat XI Pro installed.
Inside my word document I have some pictures that have a hyperlink. Those hyperlinks directionate to a bookmark inside the word document. Inside the word document, if I do Ctrl+Click over the image, it will go to the page that has that bookmark. And it works. Period.
Beside that I also have some Cross-references on the word document. Those cross-references basically are the page number from the bookmark reference. By accident on most of those cross-refrences I left enabled the "Insert as hyperlink" on the cross-reference box options. When I Ctrl+Click over those cross-references I also go into the page of that cross-reference.
After I convert the word document into pdf, I can't get any hyperlink on the pictures, if I simply click on them, like if I click on a hyperlink on a webpage or something similar, the pdf won't go the the bookmark on the page that I've set on the word document.
The funny thing is that if I click on the other cross-references I can go to the page were that cross-reference is...
I tried all the methods to convert the file in order to obtain hyperlinks on the images...
I tried to use the Acrobat tab and the File -> Save as Adobe PDF, as both uses Acrobat PDFMaker, but nothing works.
Even tried all options on Acrobat PDFMaker but can't get it. "Create bookmarks", "Add links", "Convert Word Bookmarks", "...Word Styles to Bookmarks", "...Word Headings to Bookmarks", none works....
If I try to simply print from inside Word by choosing the Adobe PDF printer (like if I choose a regular printer), in the printers options it doesn't show up any hyperlink/link/bookmark option related, so that way is definitely a no go...
To reference, on 2006/2007 I also worked on a similar project and used this method on the word document (on Word 2003). At that time I had another Adobe Acrobat version, can't remember what version was...
This hyperlink situation was without any problem. After conversion, on the pdf file, if I click on a image it went to the right place inside that pdf file...
So I'm simply lost wether it's a problem of me, a problem of Word, a problem from Acrobat... simply lost...
I'm desperated....please, someone help me!!!Ok, sorry for never talk since the last time, but I finally discovered why I had this problem.
I found out that M$ decided somehow to change the process of embedded hyperlinks on a image, but in a docx it doesn't get affected. Only after transforming it into a pdf by Acrobat that the problem emerges...
I found this site http://www.pb-solv.net/2013/08/embed-pictures-in-microsoft-word.html
Basically all I have to do is "Use Insert, Quick Parts, Field, IncludePicture. This inserts the picture in the old way as a field. You can use Alt-F9 to reveal the field codes and change the images to be embedded rather than linked."
Then, after converting it with acrobat, the pdf finally have hyperlinks on the images!!!
They change this on Word 2007. As I had the 2003, at the time, I didn't had this problem.
As I said, M$ changed something, but only is affected after converting with acrobat. So, acrobat also missed something in the process. I call it a 50/50 guilt.
To bad no one ever notice this problem... -
Why do lines show up after converting Word doc?
Acrobat X Pro
After converting a regular Word doc, which doesn't 'appear' to contain lines around the paragraghs, contains lines in the PDF. I believe I have chosen the highest quality in the convert settings, and cannot figure out why I'm getting this junk in the PDF. I'm only having issues with a Word file received from the same person.
How do I clean up the Word doc before converting, I guess is the real question...
Confused!George, thanks for your patience with me! I created a shared workspace via Acrobat.com...but not quite sure how to share it with you... I think I emailed the forum at:
discussions-community-acrobat-creating__editing_&[email protected]
Please let me know what I need to do to share the workspace. Thank you again.
Rhonda -
Wavy lines in bar charts after converting a Powerpoint to a pdf?
After converting a Powerpoint file to a pdf, the bar charts have wavy lines. The one thing I noticed is that the problem appeared when creating the pdf with Notes showing. If Notes are turned off, then the bars are fine.
Is there a solution for this?Version is Office 2007.
OS is Windows 7.
Viewer - I think it is Acrobat 9 Pro.
When printing, the option to print notes is chosen. If the option is just slides, the bars in the charts are normal.
To create a PDF, the Powerpoint file is open --> then go to Print --> in the Print dialog box, change the printer name to Adobe PDF and print. -
After converting a pdf to Word
After converting to Word (using adobe's export service), special characters appear & text is altered. What did we do wrong?
Besides Daniel's answer, you should be aware that Acrobat is not the forum for the service you are talking about. There is a separate forum for the services such as you are talking about and may be a better source of answers.
-
Receiving a message in my word document after converting from a PDF to word. Please advise
After converting and dowloading that converted file from a Adobe PDF file to a word document I then open the word document to see a message stateing
"To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html
For further support, go to www.adobe.com/support/products/acrreader.html"
Please proivde advise on how to sucessfully convert the Adobe PDF file to a word document.Hi Buster,
The error message you were receiving occurs when you try to convert a dynamic PDF file created with Adobe LiveCycle Designer. This file is usually already a fillable form. Unfortunately there is no workaround available for converting documents like this within the ExportPDF service.
I'm sorry for the inconvenience.
Please let me know if you have any questions or if I can be of further assistance.
-David -
How to edit the text in a trailer 'after' converting to a project?
After converting my trailer to a project so I can add photographs and further music. I accidently deleted the last frame of the trailer credits.. and now need to add it back in. Your help is much appreciated! Nick
Try Command-Z or Edit/Undo. (if you deleted the whole title page).
You can edit text by clicking in the text. -
I am preparing a book which I want in Times New Roman. After converting from PDF files, many of the pages had other fonts, mainly Cambria in them and I couldn't get the whole document in the same font. How can I fix this?
ESharanFix it in Word. Converting to Word from PDF is a complex and uncertain process, just the first stage in editing. But does the book only exist in PDF? Often people go through PDF because it seems easier, while often it is harder.
-
Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?
I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week.
Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
Fix:
With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
It also supported AOL, AIM, Google Talk, Jabber.
Guess I miss it frist time... hope this helps...
Maybe you are looking for
-
Help required for importing a repository data file in the B2B console
I am trying to import a repository data file with the delivery-channel element and attributes as below. <delivery-channel name="GM_DC" syncReplyMode="none" nonrepudiation-of-origin="false" nonrepudiation-of-receipt="false" secure-transport="true" con
-
Date fields do not accept 12-AUG-00
I am using forms 6.0.8.11.3. When I enter a date like 12-JUL-00 (dd-MON-yy format) in a date field I get ORA 66502 FRM 50003 error "Year must be 00-99 or 1000-4712". Please help! Thanks in advance.
-
How do I get my apps from my iPad onto my new I mac
how do I get my apps from Ipad onto my new imac?
-
My Revolution Not Receiving The Whole Text Message
Hello, lately I have been having a problem receiving the whole text message. People with smart phones text sometimes page length texts. I have no problem sending out page length text, but when someone sends me one, from many different companies and p
-
Error message when sending an e-mail from my phone
Recently, I have been un able to send e-mails from my phone. When I try to send them, almost immediately I get an e-mail from "RIM_bca28a-e9c0-11d1-87fe-00600811c6a2" The contents of the e-mail say: This message is used to carry data between the Bla