Air Screen Dims when watching movies

Hi all! This is a stupid question. I've just purchased a new macbook air 11.6 in and when watching movies (not in ful screen) the screen dims, Im assuming because of inactivity with keyboard, etc. I dont like to watch all movies in full screen, so how do I change the settings to allow for longer 'inactive' times? Meaning, I don't want the screen to dim after only 5 minutes. Thanks!

In System Preferences > Energy Saver > uncheck "Automatically reduce brightness before display goes to sleep"
Also adjust the sleep timer to suit.

Similar Messages

  • Screen dims when watching internet movies

    My PBg4 screen becomes dim when watching internet videos or slide shows in iphoto or imovie.
    I have to keep moving the mouse to keep the screen well lit.
    Is there a way to fix this problem and still have the dim screen dim in all other situations where needed?

    Thank you so much.
    I did not want to set the CP to never sleep, because in normal circumstances I want the screen to dim.
    This way I can activate the non-sleep feature only when I need to.
    Regards

  • Screen dim while watching movie

    I haven't found a definitive reason for this really irritating behaviour.
    When watching a movie on my G4 Powerbook the Apple keeps dimming the screen. Incredibly annoying to have to tap the trackpad every couple of minutes.
    From what I have read - and it's not much - I finally figured out that to stop this I need to go to the Energy Saver settings and uncheck "Automatically reduce the brightness of the display before display sleep."
    Wow. That was obvious....
    My question though is much simpler.
    Who on earth would design a system that dims the screen while a movie is playing? I can't conceive of any situation during which I would launch a movie and prefer to have it dim.
    Shouldn't the screen default to not dimming when a movie is being played?
    Powerbook G4 Mac OS X (10.4.7)

    1315/3761
    Hi Barry,
    Of course, and this is a case of sending Feedback...
    My workaround: Active Screen Corners (in System Preferences > Exposé). I have one assigned to Disable Screen Saver, and I leave the mouse pointer on it when watching a movie.
    HTH
    Axl

  • Freezing video when watching movie on 2nd monitor.

    Freezing fregrently for a second video when watching movie with ful screen option.
    OSX 10.6.8 system.
    MacBook pro 3,1
    2.2 GHZ
    memory 4GB
    NVIDIA GeForce 8600M GT

    You won't be able to do it with the included QuickTime media player. But it can be done with other media players like MPlayer or VLC I am pretty sure. Haven't had this exact need myself but have seen other similar threads and recall the above being recommended. Good luck.

  • My "Apple TV" is hooked up via HDMI to my Marantz receiver.  Everything works fine when watching movies.  When trying to watch a show or listen to music, there is no sound.  Has this happened to anyone else?

    My "Apple TV" is hooked up via HDMI to my Marantz receiver.  Everything works fine when watching movies.  When trying to watch a show or listen to music, there is no sound.  Has this happened to anyone else?

    Perhaps you should ask over in the iPad community, you may get better answers there.
    It's actually my fault that psoon ended up here ... s/he intially posted over at Home Sharing, and I tried a relocate request to Apple TV rather than iPad.
    psoon, here's a link to the iPad community:
    Using iPad

  • How to stay in full screen mode when the movie is end

    for some commercial reason, I need quicktime to stay in full screen mode when a movie playing is end.How can I config it? Thanks a lot.

    You can place what i called a sprite in the video.
    http://homepage.mac.com/qt4web/sprites/items.html
    Scroll down the web page a little bit and you'll find it. You place the stop sprite a few seconds before the end of the video.
    Right click on or control+click on stopsprite.mov in the above web page to open the sprite in the Quicktime player.
    Click on the sprite movie, 'select all' from the menu. Click on the video you want to stop. Go to about 5 second (more would better) before the end of the video. Hit the key i on the keyboard. Go to the end of the video and hit the key o (Oh). Go back up to Quicktime's menu--->Edit--->Add To Selection & Scale--->Save As and rename the video. Done....
    If for some reason the video doesn't stop add more time....10 seconds before the end of the video.
    Message was edited by: David M Brewer

  • When watching movie on ATP2 the display of computer never sleeps

    When watching movies on ATV2 the display of computer will not go to sleep. After fiddling with setting both on computer as well as ATV2 the problem still persists. This coincidentally happened after lastest upgrade never had the problem with last firmware. Is anybody having the same problems?.

    when the computer fall asleep it power down it's harddisk and it's netcard
    so you would likely be more bothered if it did fall asleep because then you're atv2 would
    lose the access to the media if you play media from your shared itune lib

  • How do I make my screen look better when watching movies?

    I notice when I watch movies on my Macbook that there are negative parts when I'm sitting on an angle. Is there any way to solve this through calibrating it or the right lighting. This doesn't happen on my sister's older Powerbook G4 that has a matte screen.

    Try not watching it on an angle and also try recalibrating it. Play around with the calibration until you find a setting that looks good for movies. Then save it. You can switch to it whenever you watch movies then.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • HELP. Screen seems to start flicker when watching move/playing games?

    Hello there.
    I could really use some help.
    Im having this problem that my screen freezes and start flimmering. I have some idea's of what can be trickering it. Because it happens when i watch movies or trying to play games.
    It looks like this: https://www.youtube.com/watch?v=jxoMhBOyx8E
    NOT THAT THE COMPUTER ON THE LINK IS NOT MINE.
    Im looking forward for help!
    Christoffer, 23 from Denmark.

    Hello christoffer153,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where you're having flickering on your display, please follow the steps in the article linked to below.]
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Take care,
    Alex H.

  • Bad sound when watching movies etc..

    Hi,
    I bought an Mini DisplayPort to HDMI Adapter Cable @ ebay a while back, and recently Ive started using it with my macbook air (running OS X Mountain Lion)
    I have this hooked up to my receiver and the image quality is superb, but the sound is not that great..
    I often use to watch movies (.mkv files) and all movies have very poor sound quality. Even when its DTS-HD Master Audio 7.1..
    Have someone experienced something like this?

    Anyone ???? I doubt I am the only one who have had this problem..

  • My system unit makes alot of noise when watching movies compaq evo

    I have a compaq evo d310.I watch movies on a 17 inch screen and cannot maximise the screen as it makes alot of noise.
    This only happens when am watching a movie otherwise the system is usually silent.Please help!!

    I have a compaq evo d310.I watch movies on a 17 inch screen and cannot maximise the screen as it makes alot of noise.
    This only happens when am watching a movie otherwise the system is usually silent.Please help!!

  • Iphone 6 plus screen frozen when downloading movies from itunes

    My iphone 6 plus screen froze up when I tried to rent/download 2 movies on iTunes. I did  not have enought free space to accommodate I guess, so instead I tried downloading it on my iPad since I had more storage space...but when I tried to rent it on my iPad instead, iTunes says I already rented it... Will I be paying for the two movies I rented since I dont have enough space to watch it? And how do I unfreeze my screen?

    Hello there, Zara2aj.
    When renting movies on your iOS device, the following Knowledge Base article explains where to locate it and the availability of that rental on other devices:
    FAQs about renting movies from the iTunes Store - Apple Support
    Where can I find movies that I rented?
    Find your movie on the device you used to rent it. Follow these steps:
    Mac or PC: Go to the Rentals tab in the Movies section of the iTunes Library.
    iOS device: Go to the Rental tab of the Videos app.
    Apple TV:
    2nd or 3rd generation: Look in the top shelf of the main menu.
    1st generation: Go to Movies > Rented Movies.
    Where can I watch movies that I rented?
    Mac or PC
    iPhone, iPad, iPod touch (with iOS 3.1.3 or later)
    iPod classic, iPod nano (3rd, 4th, or 5th generation)
    TV using Apple TV
    Watch your movie on the device you used to rent it. If you rented the movie on your computer, you can move it to an iOS device or Apple TV (1st generation). To do this, connect the devices and sync using USB. When you move a rented movie from your computer, it will disappear from your computer’s iTunes library. You can move the movie between devices as much as you want, but you can only have it on one device at a time.
    If you rented the movie on your iOS device or Apple TV, you can’t move it to any other device.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Screen Dims when moved/left Corner Squeeze

    Hi-
    Recently, my iBook G3 (600 mHz) screen began to dim and flicker occasionally and sometimes the screen would eventually go totally black.
    The iBook works well if it is on a solid table but I can replicate the dimming/flicker issue if I move the iBook around or if I open and shut the screen a few times in a row. However, I can always make the screen dim/flicker when I squeeze the left corner of the computer (left side of keypad).
    Is this a logic board problem? Is there a real fix for this issue aside from the shim fix that has been suggested in other posts? Will it be expensive to fix?
    Thanks in advance

    I had the exact same problem as the poster of this topic with a 500MHz iBook G3, and I can confirm, THE SHIM FIX WORKS. I was experiencing the problem with the flashing backlight, but there would still be a image on the screen, so I knew the display was not gone. I went to my local Walmart and bought a pack of 4mm. Scotch Mounting Squares, and attached one to the raised square on the bottom shield as directed and it worked like a charm. I haven't had a problem since. I highly recommend this method. Here are the iFixit instructions for removing the bottom case:http://www.ifixit.com/Guide/Mac/iBook-G3-12-Inch/Lower-Case/50/5/Page-1/Battery
    You can read about how to install the shim in one of the replies in this thread:
    http://discussions.apple.com/thread.jspa?threadID=1318970&tstart=0

  • External screen dims when opening different apps?

    Hi All ----
    Seems my external screen dims and rectifies when opening different apps - like some kind of brightness adjustment going on... it doesnt happen on the MBP, just on the external screen --- i've checked all possible settings on Ext. Displ. / re-booted / repaired perms... cant quite figure it out.
    I dont think this is energy-saver related.
    Many thnx for any help in adv. ---
    cheers,
    J.

    The problem with that is, it's hard to put it back together without assuring that you're not pinching the cable again.
    Instructions can be found here.
    As he says, the cable can be found at Small Dog Electronics:
    http://www.smalldog.com/product/43417
    If you need replacement feet, they can be found at MicroDoc.
    The specific link you need on PowerBook Tech's website can be found here.
    If it looks like too much for you to handle, you may want to check out DT & T Computer Services. Perhaps in a metropolitan area like Austin you can check the Yellow Pages and find a technician willing to match the price.
    At one point, DominionTech in Colchester, Vermont was offering the repair for $79.90, but I'm not sure if that price is still available.
    Good luck.

  • Does the Apple TV use data when watching movies or TV shows?

    Does Apple TV use data while watching movies and TV shows with iPad air or iPhone 5?

    Welcome to the Apple Community.
    That largely depends on the Apple TV setting at settings > airplay. The Apple TV can download the content from the internet (if available) or from you iPads storage depending on whether you have it set to play from iTunes in the cloud or not.
    Of course if you don't have the content on the iPad, it will download it from the the internet and if you do and choose not to use the iTunes in the cloud feature it may use a small amount of data confirming your authorisation to play it.

Maybe you are looking for

  • Is there a way to use a Master Password only to view Saved Passwords, without having to type it in every session?

    If anyone ever uses my computer, they can easily see my Saved Passwords. I want to be able to secure them. The only way to do that is by setting a Master Password, which is great, but I don't really want to have to type it in every time I open up my

  • File not getting Saved on Application Server

    Hello All, We created a file in "Automatic Payment Transactions (F110 Transaction)" and are able to save the text file on Local drive. But for our e-banking requirement we need to store this file on our application server. The configuration settings

  • How do I customize the Email Attachment name in Email Bursting?

    I had worked on BI Publisher extensively on 10g and 11g. I have a client requirement with BIP email bursting to deliver the reports as email attachments. I'm able to do it, and also customize mail body etc. However the email attachment file name is r

  • Cisco Catalyst 2980G

    Hi all, I am currently studying for my CCNA and have acquired some cisco equipment to help me with this. One of the devices I have is a Cat 2980G 80 port but for some reason I am unable to connect to it via the console port.  All my other switches an

  • DC dependencies problem

    Hi, I have created two DC's - one java DC, and one J2EE components/Library DC.  Java DC include only one Class. This class is added to public part (two times with purpose compilation and purpose assembly). I have added both public parts of Java DC tw