AIR SDK 15.0.0.349, Android 5.0 and CameraRoll

Have a couple of problems with the above in some software I'm writing.
1. Images saved to the CameraRoll/Gallery prior to the installation of my software cannot be loaded by it and results in a Error #2032 Stream Error. Images saved afterwards to the CameraRoll/Gallery work fine. I realise this makes no sense, why should the date of installation matter?
2. Images loaded from the CameraRoll in portrait mode into my program are cut off about half way down. Landscape mode works fine.
Neither of these problems are apparent in versions of Android prior to 5.0.
Any help would be gratefully received.

There seems to be a difference between FB 4.6 to FB 4.7.
Can you check, if you can find the "Customize Launch Parameters" here?
[EDIT: Sorry, just saw a screenshot you posted at the top, indicating there is also no such an option!]
Other than there I wouldn't know where you could set them in FB 4.6.

Similar Messages

Fb 4.7 air sdk 15.0.0.349 Error occurred while installing the application

Hi
Im using fb 4.7 air sdk 15.0.0.349 with Macosx 10.9.4, xcode 6.1 (ios simulator 8.1) and i keep getting the following response when debugging with ios simulator:
Error occurred while installing the application:
Session did end with error (null)
Can you help? Is this a bug being fixed yet?
Thanks.
zed0784

Sorry i was refering to my other post. I am on FB 4.7, AIR 15 SDK 15.0.0.356, Xcode Version 6.1 (6A1052d) with the same problem on Mavericks on my MacPro and Yosemite on my MacBook Pro. My App (which uses Feathers and Starling) didnt work at all and even got rejected for Testflight testing because is was crashing immediately on iOS 8.1. I found out that this was related to the new compiler so "-useLegacyAOT yes " solved that problem.
But the problem that i cannot test in iOS simulator at all still persists. (Session did end with error (null))

How to install latest AIR SDK (13 or 14) in Flash Pro CS6?

Hi, I'm using Adobe Flash Pro CS6 on Windows 7 64-bit and I wanted to add latest Adobe AIR SDK, either 13 or 14, but non of them is seen as a valid SDK by Flash.
I've tried downloading two possible SDKs (SDK & compiler and SDK without compiler) from here: Download Adobe AIR SDK (version 13) and here http://labs.adobe.com/downloads/air.html (version 14). Each time I copied the extracted SDK folder to my Flash CS6 folder where default 3.2 and 3.4 SDKs are located. After that I open Flash, then Help > Manage Air SDK, click on " + ", browse for the new folder, and all I get is "The selected folder does not contain a valid AIR SDK" warning message. It all looks the same with all four SDKs I downloaded!
Not long ago I added AIR 4.0 without any problems. What am I doing wrong? Is new SDK Flash CC only or what?

What are you naming the folder?
Just as a general tip, since many applications (Flash CS4, 5, 5.5, 6, CC) you can save some space by only putting the AIR SDK in one place. Since CS6 and CC have "Manage AIR SDK" in their settings you no longer need to locate that folder like 5.5 which requires you to overlay the AIR 2.6 folder. So save some space and put it anywhere out of the way, out of the Flash folder. I have multiple drives and I have lots of SDKs installed at root on my E:\ (E:\SDK\AIR, E:\SDK\JDK, E:\SDK\Android, etc). I then just go in the help panel like you do and point CS6 and CC to E:\SDK\AIR and they work perfectly fine with the latest SDK released recently.
Are you updating Flash Player to 13 as well?
Last, do not download the Flex version for Flash. Flex is for Flash Builder if you intend on using Flex (it is different than Flash).
Do not get this:
You want the SDK from the big orange buttons above this warning.

How do I install Adobe Air SDK for CS5.5 Products?

Hey how would I install Adobe Air SDK 3.7 for Flash Pro CS5.5 and Flash Builder 4.6?

Okay this is what I got from the .XML file:
<?xml version ="1.0" encoding="utf-8" ?><application xmlns="Untitled-11.0Untitled-1http://ns.adobe.com/air/application/3.7"><id>Untitled-1</id><versio nNumber>1.0</versionNumber><filename>Untitled-1</filename><description></description><name>Untitled-1</name><copyright></copyright><initialWindow><content>Untitled-1.swf</conte nt><systemChrome>standard</systemChrome><transparent>false</transparent><visible>true</vis ible><fullScreen>false</fullScreen><aspectRatio>portrait</aspectRatio><renderMode>auto</re nderMode></initialWindow><icon></icon><customUpdateUI>false</customUpdateUI><allowBrowserI nvocation>false</allowBrowserInvocation></application>

AIR SDK (MAC) from 4/14/2015 contains version 17.0.0.124, not 17.0.0.144

Just downloaded the AIR SDK update (for mac) from 4/14/2015 and it seems as if the package contains version 17.0.0.124 and not 17.0.0.144. At least this is what the air-sdk-description.xml file says.

Did you overlay the downloaded sdk over current sdk? or share the steps that you followed?
Please follow the steps given in Update the AIR SDK for ActionScript Projects | Flash Builder 4.7 to update AIR SDK.
I downloaded the Air SDK for Mac from Download Adobe AIR SDK and app descriptor file does say 144.

Any News from Adobe Air SDK, on why we still can't REMOVE "android.permission.INTERNET" from a release compile?

Is there any new developments on the Adobe Air issue, of being able to COMPLETELY REMOVE the "android.permission.INTERNET" from the manifest file? As of today, you can still completely remove the "android.permission.INTERNET" from the manifest, bundle your app with Captive Runtime, and Adobe Air SDK will still "tack" the permission onto the end of the manifest block. With users and privacy concerns these days, surely Adobe would recognize that developers building apps that DO NOT REQUIRE Network Access, should be able to remove that permission. Any help on this?

I see Flash will now be able to export iPhone apps directly. Although Flash itself will still not run on the iPhone. It would be great if Director had that functionality a well. Even better if apps could run on both the iPhone and Blackberry!
Mike M

Prompt users to download air sdk from a location other than Android Market

Hi,
I am developing a android app using adobe air sdk for a device that DOESN'T have Android Market.
Is there a way for my app to prompt a user to download the air sdk from a location other than Android Market?
Thanks,
Kai

Well your in luck,
If the app is going to be pre-installed, then you can pre-install the AIR Runtime with the app.
First download the AIR 2.5 SDK or go to where your AIR SDK is located on your machine.
go to the following directory within the SDK folder....
"\runtimes\air\android\device\"
"Runtime.apk" will be the name of the file. install that on the device and your done.
They dont need to be prompted because they will have it pre-installed.
This will allow them to start the app, then if there are any updates to the Runtime.apk, you can prompt them within the app to download with instructions.

How to setup Flex SDK with latest AIR SDK?

Now the latest AIRSDK web page has a small link at the bottom for Flex users and it states that Flex users should take the SDK version without the compiler. BUT....
the http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html page says to download the SDK from
http://labs.adobe.com/downloads/asc2.html
but this page now redirects to:
http://helpx.adobe.com/air/kb/archived-air-sdk-version.html
which contains a large list of archived SDK's. So that help page never really says which version of the SDK to use - with or without the compiler. But other forum posts have implied its suppose to be the one with the compiler.
Now since we're overlaying the ...plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK folder that would make sense.
But now there's a second overlay instructions page at:
http://helpx.adobe.com/x-productkb/multi/how-overlay-air-sdk-flex-sdk.html
with different instructions.
So my questions are:
   Which overlay instructions are we really suppose to use?
   Which version of the AIR SDK (with or with-out compiler) are we suppose to use?
   What does the Flex Library Project properties -> Flex Library Compiler -> 'Include Adobe AIR libraries' checkbox really do?
        If I've followed the (first) overlay instructions above, does this checkbox now mean I'm using the overlaid AIR SDK 3.6
        with the current Flex SDK I've chosen?
        What if I'm using the Apache Flex 4.9.1 SDK? Will the AIR SDK 3.6 overlay that?
            (Doesn't Apache Flex have AIR 3.4 embedded - will this confuse Flash Builder 4.7 ?)
Is it just me, or is this just getting more and more confusing? Can we perhaps get a AIR SDK combo box to go beside the Flex combo box and when we check the 'Include Adobe AIR libraries' then we can select the AIR SDK we want? And get a 'configure AIR SDKs...' link too? Then perhaps we can get completely away from overlays and all this merged SDK nonsense. I've had nothing but problems with it.
The real reason I need all this info is because I'm trying to use Flash Builder 4.7 to build an Android ANE and I'm having a devil of a time just trying to find my resources. When I use context.getResourceID() I'm not getting the correct resources - and after reviewing other posts here I came to the conclusion that it might be due to bugs in older AIR SDK's. So really, at the moment I could care less about the latest Flex SDK, I just need to know I'm working from the latest AIR SDK.
Thanks in advance.

If you are not using Flash Builder go here: http://www.adobe.com/devnet/air/air-sdk-download.html
At the bottom it says:
Note : Flex users will need to download the original AIR SDK without the new compiler. Mac Windows.
Download the proper one for your OS and then extract it over your existing Flex SDK directory.
EDIT: Just read your post again and noticed you mentioned Flash Builder. In that case you want to follow these directions: http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html and grab the version with the compiler at http://www.adobe.com/devnet/air/air-sdk-download.html

After overlaying Air SDK 3.6, iOS projects show a blank screen after startup.

Hi,
I recently overlaid Air 3.6 in Flash Builder 4.7. My projects are using stage3D via Starling. Using the 3.4 SDK that comes installed with FB 4.7, my projects compiled and run fine with both debug and release builds. After overlaying the 3.6 SDK, the projects work fine in the simulator and on Android but when I run the projects on iOS I get a blank screen. I reverted to the 3.4 SDK and my projects work fine on iOS. But, I'd like to be able to have access to the features of 3.6, any and all suggestions would be very much appreciated.
Thank you for you time.
Chris

Did you follow these exact directions?
http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html
(They changed recently and are updated for Flash Builder 4.7)
For step 4, all you have to do is create the blank strip folder - don't need to copy the other files with 4.7 and AIR SDK 3.6.

Soft KeyBoard is not working on ios 7 with Air sdk 3.8

Hi
In my app Soft KeyBoard is not working on ios 7 with Air sdk 3.8. Does any one know soluton for this ?

Hi,
There's no question that TextFields and TextAreas weren't working in our case, likely because we have a deep displaylist with a variety of object types. Presumably, AIR has changed how it looks through the displaylist for objects that need keyboard, and perhaps we have an object type somewhere in the hierarchy that AIR no longer recurses. It's definitely something that changed, though.
It's no picnic to put together a sample app, I can't afford that time when I have a solution. But the symptom was very clear, a textbox would open, and the cursor would just blink with no way of interacting with it.
I'm happy using StageText directly, because it's a more direct way to interact with the OS and gives more control.
It also solves a bug in AIR that I haven't reported yet, but is as follows. Rarely, when you move the container of a TextField of TextArea after it has been created, AIR will crash and freeze iOS devices. It doesn't happen on Android or desktop, but with a user-base of about 100,000 of our app, we've had it reported maybe 50 times. One of our dialogs sometimes needs to reposition the elements, which is done animated. During this, AIR will crash about 0.01% of the time. We tried only creating the TextArea, but not activating it or even having it visible, but even an invisible TextArea will crash, presumably because AIR moves the internal StageText overlay around as well, and this confuses iOS after a while during the animation.
By using StageText directly, I finally also have a way to get rid of this bug, because I simply don't activate StageText until the object has already been positioned. Prior to that, it isn't even an editable text field, it's a label like anything else. So I'm happy I did this solution.
Let's just leave this thread as a record if someone else has the same problem. I'm quite sure it's because of our very complicated display list, and AIR having changed how it scans the displaylist for objects that need keyboard.
Best,
Per

Intellisense not working after update adobe air sdk on Flash CS6

I updated the Flash Professional CS6 Adobe AIR SDK to 15.0.0.249, but when i start a .FLA file that uses the new SDK, the Intellisense not work! So i need use AIR SDK 3.4 (native) to work with Intellisense... This is a real waste of time! Can i fix it?

Hello
> Is there anybody from toshiba following the thread
I dont think so because it s an user to user forum only and nobody from Toshiba is here.
Can you post more details? You wrote that you cant watch flash videos but do you get an error message or what happens exactly?
What browser do you use?
I would recommend reinstalling Adobe Flash from Android market. This should help.

Content is not Panning while softkeyboard appears in GPU and Direct Mode (Adobe Air SDK 4.0.0.1390)

Hi,
My content is not panning while softkeyboard appears in GPU and Direct Mode(I have placed my input textfield at the bottom of the screen) it is working fine with the CPU and AUTO Mode. I am using Air sdk v 4.0.0.1390. I have checked my manifest file also and have added '<softKeyboardBehavior>pan</softKeyboardBehavior>' still it is not panning my content while keyboard appears.
Has anybody faced this problem earlier?
(On Android i am getting this problem on iOS it is working fine)

Could you please open a new bug report on this over at https://bugbase.adobe.com? When adding the bug, please include some sample code or a sample application so we can quickly test this out internally. If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]).
Once added, please post back with the URL so that others effected can add their comments and votes.
Thanks,
Chris

AIR 3.6 instant crash on Android 2.2 (with captive runtime)

I haven't gotten past this. Have to use 3.5 instead.
I/ActivityManager( 2505): Displayed activity air.com.sgn.myApp/.AppEntry: 539 ms (total 539 ms)
W/dalvikvm( 8672): No implementation found for native Lcom/adobe/air/AIRWindowSurfaceView;.nativeSurfaceCreated ()V
D/AndroidRuntime( 8672): Shutting down VM
W/dalvikvm( 8672): threadid=1: thread exiting with uncaught exception (group=0x4001d7d0)
E/AndroidRuntime( 8672): FATAL EXCEPTION: main
E/AndroidRuntime( 8672): java.lang.UnsatisfiedLinkError: nativeSurfaceCreated
E/AndroidRuntime( 8672):        at com.adobe.air.AIRWindowSurfaceView.nativeSurfaceCreated(Native Method)
E/AndroidRuntime( 8672):        at com.adobe.air.AIRWindowSurfaceView.surfaceCreated(AIRWindowSurfaceView.java:719)
E/AndroidRuntime( 8672):        at android.view.SurfaceView.updateWindow(SurfaceView.java:536)
E/AndroidRuntime( 8672):        at android.view.SurfaceView.dispatchDraw(SurfaceView.java:339)
E/AndroidRuntime( 8672):        at android.view.View.draw(View.java:6800)
E/AndroidRuntime( 8672):        at android.view.SurfaceView.draw(SurfaceView.java:325)
E/AndroidRuntime( 8672):        at android.view.ViewGroup.drawChild(ViewGroup.java:1640)
E/AndroidRuntime( 8672):        at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1367)
E/AndroidRuntime( 8672):        at android.view.ViewGroup.drawChild(ViewGroup.java:1638)
E/AndroidRuntime( 8672):        at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1367)
E/AndroidRuntime( 8672):        at android.view.ViewGroup.drawChild(ViewGroup.java:1638)
E/AndroidRuntime( 8672):        at android.view.ViewGroup.dispatchDraw(ViewGroup.java:1367)
E/AndroidRuntime( 8672):        at android.view.View.draw(View.java:6800)
E/AndroidRuntime( 8672):        at android.widget.FrameLayout.draw(FrameLayout.java:352)
E/AndroidRuntime( 8672):        at com.android.internal.policy.impl.PhoneWindow$DecorView.draw(PhoneWindow.java:1894)
E/AndroidRuntime( 8672):        at android.view.ViewRoot.draw(ViewRoot.java:1407)
E/AndroidRuntime( 8672):        at android.view.ViewRoot.performTraversals(ViewRoot.java:1163)
E/AndroidRuntime( 8672):        at android.view.ViewRoot.handleMessage(ViewRoot.java:1727)
E/AndroidRuntime( 8672):        at android.os.Handler.dispatchMessage(Handler.java:99)
E/AndroidRuntime( 8672):        at android.os.Looper.loop(Looper.java:123)
E/AndroidRuntime( 8672):        at android.app.ActivityThread.main(ActivityThread.java:4627)
E/AndroidRuntime( 8672):        at java.lang.reflect.Method.invokeNative(Native Method)
E/AndroidRuntime( 8672):        at java.lang.reflect.Method.invoke(Method.java:521)
E/AndroidRuntime( 8672):        at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:858)
E/AndroidRuntime( 8672):        at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:616)
E/AndroidRuntime( 8672):        at dalvik.system.NativeStart.main(Native Method)
D/dalvikvm( 2505): GC_EXTERNAL_ALLOC freed 2841 objects / 136240 bytes in 68ms
I/        ( 2505): dumpmesg > /data/log/dumpstate_app_error.log
W/ActivityManager( 2505):   Force finishing activity air.com.sgn.myApp/.AppEntry

Which AIR SDK version and device you are using? There was a sound.play() crash on Android 2.2 devices which was fixed and the build available at http://www.adobe.com/devnet/air/air-sdk-download.html. And, yes minimum version is android 2.3, please see the link http://help.adobe.com/en_US/air/build/WSfffb011ac560372f-5d0f4f25128cc9cd0cb-7ffc.html for more reference.
Also, I request you to share a sample application so that we can reproduce the crash if it is not related to sound.play() and reproducible with the latest AIR SDK.
Regards,
Nimit

Incorrect ADT version when compiling using updated AIR SDK in Flash Builder

I was wondering if anyone else has come across adt version issues when compiling with Flash Builder.
I just downloaded Flash Builder 4.7 (I had 4.6 installed previously). I upgraded due to AIR SDK issues when trying to send my app to iOS. I downloaded AIR 3.7 SDK and done the whole "overlay" described here http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html but when trying to compile it Flash Builder, it states that version 3.7 is not only up to 3.1 I did a check of the adt that is being used (adt -version) and it returns back that it is version 3.1 This is the one contained within the sdks/4.6.0/lib folder. If I copy the one from the AIRSDK folder and check the version on that 3.7 comes up correctly, but it needs files that are contained in the AIRSDK folder, so I'll need to copy more than just the adt.jar file.
Really I'm just trying to see if anyone knows what I can change in Flash Builder to point to the AIRSDK folder instead of the sdks/4.6.0/lib folder so I'm not constantly updating my adt.jar file each time I install a new AIR SDK.

OK, not the best solution (hopefully someone will be able to tell me where to update Flash Builder to point to the AIRSDK directory instead of {FB install dir}/sdks/4.6.0/lib, but until then, here's a work around.
First make sure to backup your old aot and android directories in your {FB install dir}/sdks/4.6.0/lib and your original adt file (I just renamed them to fileOrDir_original)
Then copy your adt.jar file, aot dir, android dir, and I copied legacy dir also to your {FB install dir}/sdks/4.6.0/lib
You should now be able to compile using the 3.7 AIR SDK. There's another fix for PIE in AIR 3.8, so I may be updating again soon to the labs build. I'm hesitant to copy any more files over in case it stops my non-mobile AIR builds from working, but hopefully this will be good enough for mobile builds and for anyone else having this issue in Flash Builder.

It's back! Bad aapt file in AIR SDK 3.4.0.2710 and can't compile in Flash Pro!

It's happened again! This also happened in a version of AIR SDK 3.3 and I had to rollback. I reported that issue as well. (search aapt)
Flash Professional CS6 REQUIRES an aapt.exe file, not an aapt file, but aapt.exe file in \AIR_SDK_3.4.0.2710\lib\android\bin\
in order to build AIR for Android apps.
Can't you put something in your build tests to cover this?
Go back and look at 3.4.0.2540 and you will see a aapt.exe file at this location within the SDK and it doesn't exist in 2710.
I'm running the latest version of Flash Pro CS6.
I'm also seeing all kinds of weirdness now with my AIR for Android builds that use ANE files. After the ANE pops an ad, my app won't properly update its screen unless its "nudged" with a tap on the touch screen. I was fine when I was building and testing under 2540 but I updated my Droid 2 test device to AIR 2710 the other day and now I'm having problems. Not good to think all the apps I've already published out may now be having severe problems if users have upgrade their AIR SDK.. Can't confirm that 2710 is the problem until I rollback my test device back to AIR 2540 though. Looks like you may be trying to fix this issue in 3.5 Beta - that's good.

Hi Kevin,
Dunno if you saw my other post to you, but I've put up a copy of the SDK that you were looking for and asked that we change our procedures going forward. As for the actual issue, would you mind creating a bug report at bugbase.adobe.com if you haven't already?
Thanks
Chris

AIR SDK 15.0.0.349, Android 5.0 and CameraRoll

Similar Messages

Maybe you are looking for