AIR SDK 17 (BETA) is not working with Flash CS6

Hi,
The latest AIR SDK 17 is not working with Flash CS6.
I tried to publish and install an iOS app to my connected device via USB but I always get an error "Check if iTunes is installed".
The latest stable AIR SDK 16 is working fine, and yes, iTunes is installed on my PC.
DETAILS:
- Flash CS6
- AIR SDK 17
- System: Windows 8,1
- iPodTouch with iOS 8.1
REPRODUCE:
Open new AIR iOS template and publish/install it to a USB connected iOS 8.1 device.
Anyone else got that error?

I was getting this intermittently. Not a super problem. A remove and install in iTunes gets it loaded (after you tell ITunes where it is).

Similar Messages

Captivate 4 AS2 Text Entry Box not working with Flash Player 11

I am having issues with text entry boxes not working at all in flash 11. I am using Captivate 4 and exporting an AS2 swf. When you get to the slide you can type but you cannot see anything nor does the button or keystroke to move on. Also there is no cursor. Any ideas?

You said it is not working with Flash 11, so does that mean you tested with previous version and that worked?
While publishing choose Flash player as 9 and publish that, verify if that plays in a compatible web browser.
AS 2 is a legacy scripting, it has been said not too be supported with even Flash Player 10 --
http://help.adobe.com/en_US/AS2LCR/Flash_10.0/help.html?content=Part2_AS2_LangRef_1.html
I believe if you switch back to version 9 while publish your project, it should work.
Thanks,
Anjaneai

I am getting frustrated with Apple not working with Flash player on some of my favorite web sites. Is there any alternative that will work on I-pad instead of flash?

I am getting frustrated with Apple not working with Flash Player on some of my favorite web sites! Is there another alternative to watching these site options on my I-pad?

Flash is not, and probably never will be, supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/ . Plus it would be up to Adobe to make a version of their flash player that works on iOS devices - something which they have never managed to do and which they have now given up on trying to do.
Browser apps such as Skyfire, iSwifter and Puffin 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, so your could try checking there for your sites (and there is the built-in YouTube app).

Linotype Decoration Pi will not work with InDesign CS6

Linotype Decoration Pi Font will not work with InDesign CS6. If I buy a new version from the Sdobr store, will it work?

Has the font ever worked in CS6? If not, did it work in a previous version? Did it ever work in any version of ID using your current OS version? I ask the last question because I helped someone on another forum today that had a font that did not survive migration on their Mac. In their case, the font was selectable but the application would crash exporting to PDF or printing.
I'm using a PC. It works here.
It is listed along with the fonts that start with D here.
Mike

Captivate 5.5 not working with Flash 11.4?

I had Flash 11.4 and published a module with click boxes that jump to URLs. The click boxes don't appear in either preview or published mode. No hand cursor, no click box, no URL, nothing. I've double checked the settings on the click boxes three times... they are correct, and the box is the top most thing on the slide.
Based on advice I found on this forum on other flash problems, I tried uninstalling Flash 11.4 and going back to 10.3. Now every time I try to launch the module I immediately go to the Flash 11.4 download page, and get the message "this content requires Flash to play - download now". So apparently you can't install an earlier version of Flash and use it with Captivate.
Which isn't a solution anyway, because my I don't want my viewers to have to do that to take this training. So what do I do? How do I make these urls available?
I won't waste my time calling Adobe support... I've made that mistake in the past. I'm really hoping someone here can help me. Upgrading to Captivate 6 isn't an option...it's not in the budget. They need to make 5.5 work with Flash - it's not that old. It's SO frustrating that every time there is a Flash upgrade I have problems with this stupid software. If they are going to publish to Flash, they need to keep the software current. They own both products for goodness sake - why don't they work together? Please help!
Thanks for your help.
Toni Rexrode

I doubt that Flash 11.4 is the cause of these issues. Having Flash 11.4 installed on your box doesn't mean your end users will need it.. Captivate 5.5 and 6 will only publish as high as Flash 10.2. So all your end users would need is that version or above.
I assume when you say you have check the settings on your click boxes, you made sure you have them configured to show the hand cursor? If this is not turned on then the normal mouse pointer is all that will be visible. But I'm betting you've checked that already.
What you may not realise is that sometimes Captivate will APPEAR to show your click boxes are on the top layer of the timeline when you look at it in Edit mode, but in fact they may be buried down under other objects in the layers and NOT be clickable at runtime. This has caught me out a few times.
To ensure that your clickboxes ARE on the top layers, select each click box in the timeline and then click the icon on the main toolbar to Bring Selected Objects to the Front. Then publish and test again.

Flash, Adobe Air, Time Machine, Safari not working with Snow Leopard

Really need some help with this.
Did an archive and install of Leopard then installed Snow Leopard. No problems yet.
90% of Video sites would not work. Uninstalled and reinstalled Flash. Uninstalled ShockWave, could not reinstall with 10.6.1.
Attempt to install adobe air, received this message: "couldn't write the application to hard drive - please verify and try again." performed verify disk, disk permissions, repair permissions all ok.
Attempted to install Air again, same message.
Tried to use Time Machine to open Safari from a week ago, received message: I did not have permission.
Using Macbook Pro, 2g memory, 80g hd, with 42g free.
Backed up on ext. HD,
Oh, one more, getting a lot of spinning wheels when using Safari that causes a lockup and hard re-start.
I have an expensive piece of software that uses adobe air and I create videos for my business and I'm not able to do so now.
Can anyone give me any ideas what I can do.
Thanks,
Z

After a couple of days of problems with Snow Leopard and flash, safari etc... I figured out the problem is with my account.
I created a new admin account and everything seems to be working. Well almost.
a couple of things I've noticed are right clicking on dock icons does nothing, no option to quit or keep in dock.
Apple Techs', had me change my account months ago to fix a problem with safari crashing. It didn't really work and more problems resulted.
*So now my big question is: How do I move need items over to the new account.* I don't want to move everything over as I might bring what caused the problem in the first place.
What I need are several apps,(like ilife, iwork, firefox, devonthink, 1password etc.) downloads, desktop, docs, files, and book marks.
*What is the best way for me to do this?* Is there anything I need to do re: Snow Leopard on the new account?
I feel like I have a new and functioning Mac again just around the corner.
Looking for your help, thanks,
Z

New Air Port Time Capsule Not Working With Old Airport Express

I have been running a home network comprised of a Air Port Time Capsule (A1254) and 5 ea Air Port Express (A1264) for several years with no problem.
The Air Port Time Capsule (A1254) died and I replaced it with an Air Port Time (A1470). Now none of the Air Port Express (A1264) work, all flashing yellow. All other network functions seem to work okay, Time Capsule Backup, Apple TV, Internet …
I am using AirPortUtility 6.3.1 for setup but do not see any way to setup the Air Port Express.

Reset the Express to factory and start over.. they should work.. are you using all 5 in extend wireless mode?
When you reset the Express click on the wifi icon in the top menu area.. and the newly reset AEx will appear in the list.. click it and Airport utility will open and attempt to automagically connect it to the TC.

Built in isight camera not working with flash

My built in isight camera on my macbook works just fine in photobooth and in skype or ichat.. but just in the past week or so, it will not work when im on websites that use flash. I've seen some threads that say that I need to go into settings and make sure that the camera chosen is the USB. When i go into flash settings, the only options are Google1, Google2, or Built in isight. It doesn't work with any of them. Does anyone have any idea how I can make it work again?

zeppelinfan1234 wrote:
I don't have google add ons. I followed the path but i have no Google folder in Application Support. Any other suggestions?
Your problem is not the same as that posted by the OP, and your system info shows you using Mac OS X (10.5.6).
For your symptoms with this system, I suggest you do the following:
(1) Apply the 10.5.8 Combo Update using the following process:
• Backup your Mac and turn off Time Machine
• Disconnect peripherals and restart Mac
• Use Disk Utility to repair permissions
• Download and install
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
• Repair permissions again immediately following the restart that finishes the update.
• Test whether Flash works for you now.
(• Turn Time Machine on later when you are satisfied that the update worked.)
(2) After applying the 10.5.8 Combo, if you are still having problems, download and install the latest Flash player compatible with your system:
http://get.adobe.com/flashplayer/otherversions/
Also check any other third-party browser plugins or other add ons. Apply all available updates and uninstall any third-party items that are known to be incompatible with your system.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

FireFox 3.6.16 still not working with Flash!

Since updating to the latest version of FireFox 3.6 I have not been able to watch flash video's on YouTube and other sites, also any flash based content is blank or black.
I'm using Mac OS X 10.5.8 on a G5 PPC so Flash 10.1.102.64, the latest for PPC Mac's.
I've gone through all the usual steps of disabling plug-in's and extensions with no luck.
I'm also using the latest Safari 5 and it is still working with YouTube and other Flash sites.
ETA - Just found something weird, if I launch the QuickTime Player (not the plug-in) after launching FireFox then Flash appears to act normally, even after quiting QT.

@cor-el
Thanks for clearing up my misunderstanding. As i understood now it is in fact only a "DOM storage data" topic.
Quote from betterprivacy:
''"Disabling DOM storage (instead of deleting the file on shutdown) causes a website script to throw an exception. This means that the execution of the script is aborted immediately, not just the DOM storage instruction is ignored. None of the following script instructions would be executed, even if those instructions have nothing to do with DOM storage. That is the reason why -with DOM storage disabled- sites like CNN.com will cease to play videos."''

Eventing not working with FLASH

Hello,
My VC application events will not work if i choose FLASH(Flex2) in the "Runtime" attribute of the Compiler settings.
Can anybody give me a hand with this?
thanks,
Alejandro.

Hi Alejandro,
Things to check:
1. Do you have the "Select" event coming form the table to display further info?
2. Does it work with Web Dynpro?
Did you know that if the compiler option is portal and on deployment you would see 2 deployed versions 1. HTML and the 2. Flex?
Let me know.
Good luck,
Dharmi

Youtube and BBC iPlayer are not working with Flash

Hi there Guys,
When I started this search I had a full head of hair :( I have read hundreds and houndreds of webpages talking about Flash and FireFox and at this point I just can't get them to work together.
I am very reluctant to change my browser as to be honest with you I love Firefox but at this point I am in desperation. I have read webpages which they remove this plug-in and that plug-in, change databases, remove this file and delete that file, called this old and remove that. And still nothing happens it just does not work.
The version of Firefox I am running 35.0.1
the version of Flash I am writing is 16.0.0.305
but every time I try to visit YouTube and/or the BBC's website nothing works HELP!!!!
I would really just do not know what to do.
Thank you for reading and I hope somebody can help.
John

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Webcams Not Working With Flash

I'm using Windows 8 64 bit, have tried on both chrome and firefox, flash version 11.8.
I'm trying to broadcast my webcam and audio in flash chat rooms. When I'm prompted to choose my video and audio sources the options show up but they can not be utilized properly. There isn't an issue with my webcams or mics because they work fine when streamed through encoders or used on Skype. The problem is specifically with flash chat rooms. I've uninstalled and reinstalled flash as a program, disabled and enabled as a plugin/add on, deleted the cache. I'm completely stumped on what the problem is please help I need to get this fixed ASAP.

Hi Alejandro,
Things to check:
1. Do you have the "Select" event coming form the table to display further info?
2. Does it work with Web Dynpro?
Did you know that if the compiler option is portal and on deployment you would see 2 deployed versions 1. HTML and the 2. Flex?
Let me know.
Good luck,
Dharmi

Line-height not working with flash and css

I'm using dynamic text in Flash with CSS, but line-height
doesn't seem to be working with. Is it supported? If not, what is a
work around to get my text to look they way I want?

I believe this is due to a corrupt file in your profile. You can confirm this if you create a new temporary Firefox profile ([http://support.mozilla.com/en-US/kb/Managing+profiles managing profiles]) and if the problem disappears.
To fix this problem (hopefully), do this:
- access ''about:support'' in your location bar
- click ''Open Containing Folder''
- close Firefox
- delete the file ''downloads.sqlite'' (send it to the recycle bin, if, for any reason, you want to get it back later)
- start Firefox
Now the problem should be solved. I believe it's simply a matter of this file having become corrupt. For whatever reason. It's really unfortunate, but I hope this fixes the issue.

cfselect not working with flash form

I have searched the forum and google to find a solution -
I've tried what's been suggested (ie - mappings of /CFIDE, adding
/CFIDE to the site root, etc.) nothing has worked. This is only
happening in my production boxes (two identical setups, running in
parallel) -
The form loads, but any options I define inside
<cfselect> will not show.. here's the basic code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Untitled Document</title>
</head>
<body>
<cfform name="theForm" format="Flash" width="300"
height="200" accessible="yes">
<cfselect label="Type: " name="feedbackType" width="200"
enabled="yes" required="yes">
<option value="">Select</option>
<option value="WEB">Our Website</option>
<option value="ACCOUNT">Your Account</option>
<option value="COMPLAINT">A Complaint</option>
<option value="GENERAL">General Comment</option>
<option value="OTHER">Other</option>
</cfselect>
</cfform>
</body>
</html>
Same code works on my localhost (development box) - so I'm
sure it's some setting I'm missing or messed up in the production
servers. I have checked the IIS settings as well as the mappings in
CF admin, both have /CFIDE defined. I've even added a mapping to
the /CFIDE within the site root.
I'm currently running CFMX 7.0.2 on Server 2003 with IIS 6
Please help!!

More info...
When I call the page locally...
http://flush/testFlash.cfm
the form works perfectly.
but when I call the page using the domain...
http://www.mydomain.com/testFlash.cfm
the <cfselect> will not work.

Fujitsu tabet m532 usb driver not work with flash builder

Hi,
I have a fujitsu tabet m532 that is not among the list of certified device but has its own of 32 bit usb driver.
But flash builder 4.5 cannot find the driver.
The hardware id I try also not work:
USB\VID_04C5&PID_133A&REV_9999&MI_01
USB\VID_04C5&PID_133A&MI_01
Can you help?
Thanks
Also, can I just edit the inf file using notepad and make it display line by line or any editor I would need?

Moving this discussion to the Using Flash Builder forum.

AIR SDK 17 (BETA) is not working with Flash CS6

Similar Messages

Maybe you are looking for