Air SDK in Flash CS5

Hello,
I recently decided to test the air 2.6 capabilites, seeing as there was no option to package from flash cs5, so I decided to try my not so bright idea, which consisted in replacing the files in my AIK2.5 folder to the ones in the 2.6 folder (I made backups so I have all the original files). No biggy, but the only thing is that it didn't work. Now in flash cs5 I can't make a 2.5 air project and I cant change it in the publish settings, it no longer appears in the menu.
How can I add the air 2.5 option back in flash cs5?? I have tried reinstalling with no success.
Thanks

http://forums.adobe.com/thread/864964?tstart=0

Similar Messages

Install adobe air 3.2 sdk to flash cs5?

I am trying to install the air sdk to flash cs5, but all I can find are flash cs5.5 instructions. I attempted to follow the instructions on this blog: http://blog.michaeljbowen.com/?p=116
The option to publish shows up, but I get these errors when I attempt to go into settings or publish a file:
(for air 3.2)- Atline 1 of file "Apollo_OpenSettingDialog.jsfl":ReferenceError: Air2_5 is not defined
(air for android 3.2) - Atline 1 of file "Apollo_OpenSettingDialog.jsfl":ReferenceError: Air2_5_Android is not defined
(air for iOS 3.2)- Atline 1 of file "Apollo_OpenSettingDialog.jsfl":ReferenceError: Air2_5 is not defined
The only instructions I can find are for flash cs5.5... Can anyone help me get it working in flash CS5?

Try this but use AIR 3.2:
http://blog.prevail.co.nz/2011/06/21/overlaying-air2-7-in-flash-cs5/

I would like to inquire how to use air 2.7 sdk in flash cs5.5.

I would like to inquire how to use air 2.7 sdk in flash cs5.5.
I have searched some solutions online and tried to copy air2.7 content in air2.6 folder(replaced the old one). I then did some efficiency tests but I don't see any improvements at all. Did I miss anything?
Besides that, There's a display ratio problem if I publish the ipa in landscape mode. I can't interact with the program either. But it is not a problem if the ipa is published in portrait mode.

http://forums.adobe.com/thread/864964?tstart=0

Overlaying adobe air sdk in flash builder 4.6

After overlaying adobe air sdk in flash builder 4.6 i am getting this error in my flex mobile project "Could not resolve <s:ViewNavigatorApplication> to a component implementation.". I have followed the steps mentioned on this link "http://rubberduckygames.com/how-to-overlay-abode-air-sdk-over-flex-sdk/". Can anyone please suggest me what i need to do in order to get this work.

Finally Figure it out..
geo = new Geolocation();
geo.addEventListener(GeolocationEvent.UPDATE, onLocationUpdate);
has to be executed before checking if it is muted.
geo.addEventListener(GeolocationEvent.UPDATE, onLocationUpdate);
Is what requests permissions from the phone to use the gps.
Hope this saves someone alot of time.
Tested With Flex 4.9.0 Air 3.8 Beta.

Intellisense not working after update adobe air sdk on Flash CS6

I updated the Flash Professional CS6 Adobe AIR SDK to 15.0.0.249, but when i start a .FLA file that uses the new SDK, the Intellisense not work! So i need use AIR SDK 3.4 (native) to work with Intellisense... This is a real waste of time! Can i fix it?

Hello
> Is there anybody from toshiba following the thread
I dont think so because it s an user to user forum only and nobody from Toshiba is here.
Can you post more details? You wrote that you cant watch flash videos but do you get an error message or what happens exactly?
What browser do you use?
I would recommend reinstalling Adobe Flash from Android market. This should help.

Incorrect ADT version when compiling using updated AIR SDK in Flash Builder

I was wondering if anyone else has come across adt version issues when compiling with Flash Builder.
I just downloaded Flash Builder 4.7 (I had 4.6 installed previously). I upgraded due to AIR SDK issues when trying to send my app to iOS. I downloaded AIR 3.7 SDK and done the whole "overlay" described here http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html but when trying to compile it Flash Builder, it states that version 3.7 is not only up to 3.1 I did a check of the adt that is being used (adt -version) and it returns back that it is version 3.1 This is the one contained within the sdks/4.6.0/lib folder. If I copy the one from the AIRSDK folder and check the version on that 3.7 comes up correctly, but it needs files that are contained in the AIRSDK folder, so I'll need to copy more than just the adt.jar file.
Really I'm just trying to see if anyone knows what I can change in Flash Builder to point to the AIRSDK folder instead of the sdks/4.6.0/lib folder so I'm not constantly updating my adt.jar file each time I install a new AIR SDK.

OK, not the best solution (hopefully someone will be able to tell me where to update Flash Builder to point to the AIRSDK directory instead of {FB install dir}/sdks/4.6.0/lib, but until then, here's a work around.
First make sure to backup your old aot and android directories in your {FB install dir}/sdks/4.6.0/lib and your original adt file (I just renamed them to fileOrDir_original)
Then copy your adt.jar file, aot dir, android dir, and I copied legacy dir also to your {FB install dir}/sdks/4.6.0/lib
You should now be able to compile using the 3.7 AIR SDK. There's another fix for PIE in AIR 3.8, so I may be updating again soon to the labs build. I'm hesitant to copy any more files over in case it stops my non-mobile AIR builds from working, but hopefully this will be good enough for mobile builds and for anyone else having this issue in Flash Builder.

I need help adding admob ads to air for android flash cs5.5 app

I would like to know how can i add admob ads in adobe flash cs5.5 air for android app without buying any extentions please tell in detail because my scripting in as3 is VERY weak, so detailed answers would be lovely.

flash-air-admob-ane-for-ios-and-android - Admob Ane,a adobe native extention(ANE) for actionscript developer to add go…
you need upgrade to flash cc.

How to update AIR SDK for Flash Pro CC?

The most recent info I can find is for Flash Pro CS6:
http://helpx.adobe.com/x-productkb/multi/overlay-air-sdk-flash-professional1.html
Does this work in Flash Pro CC?

Thanks Colin.
I was thinking of adding a comment to my previous post along the lines of, "You would think that Adobe could make this process easy." It appears that they could, and they have.

Any known issues with TLF in AIR 2 from Flash CS5?

Hi,
We're creating an AIR 2 application in Flash CS5. Virtually all text is TLF text.
It's a CPU and RAM hog.
Saving the file as CS4, opening it in Flash CS5 and then generating an AIR 2 file works great, although, of course, we've lost all the TLF and the text needs some serious re-formatting.
The development environment is Mac Snow Leopard, with latest OS and Flash updates.
Any thoughts are greatly appreciated.
Thanks,
Kirk

I've had similar oddities with Booting USB drives off several MBP's and am not sure there's a rational explanation of some of the oddities. (I have a twin cable and if one doesn't power it I stick the other plug in and it works 100% of the time)
FWIW This Mac's iSight shows 500/500 +when not in use+ (5,1) while the EyeTV Diversity and external Logitech camera also both show 500/500 - Bluetooth USB controller shows 500/0 even with 3 devices hanging off it ...

Updating Flash CS5 Built-In Player, Flex SDK 4.1

QUESTION 1:
I'm trying to update the built-in player of Flash CS5 to the latest 10.1.53.64 version.
I've downloaded and replaced the "Players" folder from this link: http://www.adobe.ca/support/flashplayer/downloads.html. However, when i trace which version Flash CS5 uses when launching from the built-in player, it displays "MAC 10,1,52,14". How can i update this?!
QUESTION 2:
what is the proper way to update the Flex SDK for Flash CS5? after installing the software, i see it's using Flex 4.0, but i want to update it to the current version 4.1. the default install includes $(AppConfig)/ActionScript 3.0/libs/11.0/textLayout.swc, but i removed that and simply placed the Flex 4.1 version of textLayout.swc in the $(AppConfig)/ActionScript 3.0/libs folder, but how can i perminantly remove the reference to $(AppConfig)/ActionScript 3.0/libs/11.0/textLayout.swc?
i've search for information on updating libraries, .swc files, etc. for Flash but it's not clear. links containing clear, up-to-date instructions on how to properly update Flash CS5 would be greatly appreciated.

If I had to summarize my problem in ten words :
With Flex 4.5 SDK and AIR 2.6 SDK I can stream dynamic http in the VideoPlayer element, but it won't play on a Samsung TV.
With Flex 4.1 SDK and AIR 2.6 SDK I can launch the app on a Samsung TV, but the VideoPlayer element won't play any dynamic http stream.
I assume this problem comes from OSMF because it is the library supposedly handling the dynamic streaming. I just can't make it work within Flex 4.1 :
If I delete the native osmf.swc and remove it from the Flex Build Path properties, Flash Builder won't compile, claiming there is an error, even if I add other more recent osmf.swc.
If I don't delete it and still add another one, either I get a conflict error or a "not found" error. either way it won't compile.

Error Upgrading to AIR SDK 3.5 in FlashBuilder 4.7

Whenever I try to upgrade to AIR SDK 3.5 distribution (by overlying it over AIRSDK) using the following instructions I get an exception (below) when I try to start up FlashBuilder 4.7.
Am I missing a step? A SDK upgrade tool would be a nice feature.
Installation Instructions
Flash Builder 4.7
Note:
Flash Builder 4.7 Beta 2 includes AIR 3.4 SDK with ASC 2.0 Preview 3.
All Flash Builder 4.7 ActionScript projects now use ASC 2.0 by default.
To manually apply a later preview of AIR SDK with ASC 2.0 to a Flash Builder 4.7 Beta 2 release, unzip the AIR SDK with ASC 2.0 distribution
over the captive version of the AIR SDK in Flash Builder 4.7.
The default locations of the AIR SDK in FB 4.7 Beta 2 are outlined below:
Mac OSX: /Applications/Adobe Flash Builder 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.348297/AIRSDK
Windows 7 (64-Bit): C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64
Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.348297\AIRSDK
Note: The distribution of the AIR SDK with ASC 2.0 is for pure-ActionScript development only. It should not be combined with an existing Flex
SDK. To update a Flex SDK with a later version of the AIR SDK, use a standard distribution that does not include ASC 2.0. See
http://www.adobe.com/devnet/air/air-sdk-download.html.
On Mac OSX, be mindful that copy operations clobber the contents of the destination - you can merge folders using the ditto command o
org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter$TerminatingClassNotFoundExcep tion: An error occurred while automatically activating bundle com.adobe.flexbuilder.as.editor (24).
          at org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLa zyStarter.java:122)
          at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java :462)
          at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoade r.java:216)
          at org.eclipse.osgi.internal.loader.BundleLoader.findLocalClass(BundleLoader.java:400)
          at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:476)
          at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:429)
          at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:417)
          at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.jav a:107)
          at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
          at org.eclipse.osgi.internal.loader.BundleLoader.loadClass(BundleLoader.java:345)
          at org.eclipse.osgi.framework.internal.core.BundleHost.loadClass(BundleHost.java:229)
          at org.eclipse.osgi.framework.internal.core.AbstractBundle.loadClass(AbstractBundle.java:120 7)
          at org.eclipse.core.internal.registry.osgi.RegistryStrategyOSGI.createExecutableExtension(Re gistryStrategyOSGI.java:174)
          at org.eclipse.core.internal.registry.ExtensionRegistry.createExecutableExtension(ExtensionR egistry.java:905)
          at org.eclipse.core.internal.registry.ConfigurationElement.createExecutableExtension(Configu rationElement.java:243)
          at org.eclipse.core.internal.registry.ConfigurationElementHandle.createExecutableExtension(C onfigurationElementHandle.java:55)

Now that there are pre-combined distributions of AIR 3.5 SDK with ASC 2.0 Preview 4,
http://labs.adobe.com/technologies/asc2/
...you could avoid attempting an overlay. Try:
1. Closing FB 4.7.
2. Backing up FB 4.7's old AIRSDK folder by renaming it to something else.
3. Unzipping the pre-combined AIR 3.5 SDK with ASC 2.0 Preview 4 and putting it in place of the old AIRSDK folder with the exact name.
4. Starting FB 4.7.
FB 4.7 does plan to offer in-tool upgrades to official AIR SDK with ASC 2.0 distributions.

Overlaying adobe air sdk 13 for flex mobile project gives me error

After overlaying adobe air sdk in flash builder 4.6 i am getting this error in my flex mobile project "Could not resolve <s:ViewNavigatorApplication> to a component implementation.". I have followed the steps mentioned on adobe site. Can anyone please suggest me what i need to do in order to get this work.

You are probably missing the updated flash debug player that describes all the new methods to the application.
There is a good walkthrough of how to upgrade flash builder to a new library version, this is described in the first video of hsharma's starling tutorials.
Its very annoying though, i wish adobe would really build in a feature like this to update libraries.

Version discrepancies in Flash CS5 and Catalyst CS5

A few month ago using ADL compiling for mobiles I noticed that the versions of ADL and AIR differed
in Flash CS5 and Catalyst. This caused me problems until I discovered it.
Package/version                       adl.exe              air.dll
Adobe Flash CS5                      2.0.1.12090       2.0.1.12090
Adobe Flash Catalyst CS5         1.5.3.9120         2.6.0.19120
I have seen the symptoms of this in other forums on the Internet.
No change even though I have updated the packages (last update of Flash came 2011-07-02).
Regards
/Ralf

The forums are not the place to post bugs/wishlist items.... Adobe rarely visits here. Use the link below, though it is probably too late for CS6 since CS6 appears to be on the verge of release - you can probably get a trial version of it and see for yourself.
Adobe - Wishlist & Bug Report
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

How to Installing AIR3 SDK in Adobe Flash CS5.5?

Hi All,
Can anyone help me, with installing AIR3 SDK in Adobe Flash CS5.5?,
I try to extract rename AIR3.0 to AIR2.6 and copy to the same location as AIR2.6 in "C:\Program Files\Adobe\Adobe Flash CS5.5" and
try to extract and add AIR3.0 to the same location as AIR2.6 in "C:\Program Files\Adobe\Adobe Flash CS5.5"
But it's not work, I don't see publish for runtime AIR3.0.
Thanks,
Porawee

Ok dasessig, I will explain step by step with my solved for WIN version reference from original http://blog.prevail.co.nz/2011/06/21/overlaying-air2-7-in-flash-cs5/.
* I have installed only Adobe Flash Professional CS5.5, not need CS5.0, I don't test in OSX version but i think it's same as WIN version.
   1. Download and extract the latest AIR 3.0 SDK. and extrack to AIR2.6.
        Note : I got this file "air3_rc1_sdk_win_090611.zip" and extrack files to "AIR2.6"
   2. Download and install Adobe Flash CS5.5.
   3. Closed Flash Professional CS5.5.
   4. Place the folder in either of the following locations:
          WIN: C:\Program Files\Adobe\Adobe Flash CS5.5\
          OSX: Applications/Adobe Flash CS5.5/
        Note : It's will replace WIN: C:\Program Files\Adobe\Adobe Flash CS5.5\AIR2.6
   5. Create new folder name "AIR3.0" in "Adobe Flash CS5.5/Common/Configuration/ActionScript 3.0/"
   6. Browse to the Adobe\Adobe Flash CS5.5\AIR2.6\frameworks\libs\air\ and copy airglobal.swc.
   7. Paste the SWC "airglobal.swc" file in Adobe Flash CS5.5/Common/Configuration/ActionScript 3.0/AIR3.0/.
   8. Browse to Adobe Flash CS5.5/Common/Configuration/Players/ and copy "AdobeAIR2_6.xml" and paste to new copy file.
   9. Rename new copy file "AdobeAIR2_6.xml" to "AdobeAIR3_0.xml".
        Note : Make sure you rename new copy file NOT original file "AdobeAIR2_6.xml"
10. Open and Edit "AdobeAIR3_0.xml" to match below xml :
<?xml version="1.0" encoding="UTF-8"?>
<players>
<player id="AdobeAIR3_0" version="13" asversion="3" minasversion="3">
    <name>AIR 3.0</name>
    <publishobject2 id="Air2_5" version="2.6" intversion="2.6"></publishobject2>
    <path platform="WIN">Air2_5.dll</path>
    <path platform="MAC">Air2_5.bundle</path>
    <playerDefinitionPath as2="$(UserConfig)/Classes/FP9;$(UserConfig)/Classes/FP8;$(UserConfig)/Classes/FP7" as3="$(AppConfig)/ActionScript 3.0/AIR3.0/airglobal.swc" />
    
    <feature name="multiScreenPublish" supported="false" />
    <feature name="mobileDebug" supported="true" />
    <feature name="apolloPublish" supported="true" />
    <feature name="apolloTestMovie" supported="force"/>
    <feature name="apolloDebugMovie" supported="true"/>
    <feature name="apolloPackaging" supported="true"/>
    <feature name="publish_localPlaybackSecurity" supported="false" />
    <feature name="publish_hardwareAcceleration"     supported="true" />
    <feature name="useDefineFont4ForDeviceText"          supported="true" />
    <feature name="useDefineFont4ForEmbeddedFonts"       supported="true" />
    <feature name="textLayoutFramework"       supported="true" />
    <encodingPresets>
        <preset uuid="0c95a8ba-8b71-44d5-b269-8fd1cf89a6ed" name="F4V - Same As Source (Flash 9.2 and Higher)" ext="f4v" default="true"/>
    </encodingPresets>
</player>
</players>
11. Run Adobe Flash CS5.5 > File > New... > ActionScrip 3.0
12. Now you have new file "Untitled-1.fla" then add below code to frame 1.
        import flash.desktop.NativeApplication;
        trace(NativeApplication.nativeApplication.runtimeVersion);
13. goto menu File > Publish Setting...   select target Player : AIR 3.0
14. Test with menu Control > Test Movie > in AIR Debug Launcher (Desktop)
15. Finally, you should have output in panel like this :
         [SWF] Untitled-1.swf - 2148 bytes after decompression
         3.0.0.3880
Note : AIR3.0 for iOS and Android is below, you should followed step 1-10 before.
AIR3.0 for iOS : open and edit "AiriPhone.xml" in "C:\Program Files\Adobe\Adobe Flash CS5.5\Common\Configuration\Players"
< ?xml version="1.0" encoding="UTF-8"?>
<players>
<player id="PFI1_0" version="13" asversion="3" minasversion="3">
    <name>AIR for iOS</name>
<publishobject2 id="Air2_5" version="3.0" intversion="3.0"></publishobject2>
<path platform="WIN">Air2_5.dll</path>
<path platform="MAC">Air2_5.bundle</path>
<playerdefinitionpath as2="$(UserConfig)/Classes/FP9;$(UserConfig)/Classes/FP8;$(UserConfig)/Classes/FP7" as3="$(AppConfig)/ActionScript 3.0/AIR3.0/airglobal.swc" />
    
    <feature name="multiScreenPublish" supported="false" />
    <feature name="mobileDebug" supported="true" />
    <feature name="apolloPublish" supported="true" />
    <feature name="apolloTestMovie" supported="force"/>
    <feature name="apolloDebugMovie" supported="true"/>
    <feature name="apolloPackaging" supported="true"/>
    <feature name="publish_localPlaybackSecurity" supported="false" />
    <feature name="publish_hardwareAcceleration"      supported="true" />
    <feature name="useDefineFont4ForDeviceText"          supported="true" />
    <feature name="useDefineFont4ForEmbeddedFonts"       supported="true" />
    <feature name="textLayoutFramework"       supported="true" />
    <feature name="rslLinkageSuppressed"       supported="true" />
    <encodingpresets>
<preset uuid="0c95a8ba-8b71-44d5-b269-8fd1cf89a6ed" name="F4V - Same As Source (Flash 9.2 and Higher)" ext="f4v" default="true"/>
</encodingpresets>
</player>
</players>
   AIR3.0 for Android : open and edit "Android.xml" in "C:\Program Files\Adobe\Adobe Flash CS5.5\Common\Configuration\Players"
< ?xml version="1.0" encoding="UTF-8"?>
<players>
<player id="android_0" version="13" asversion="3" minasversion="3">
    <name>AIR for Android</name>
<publishobject2 id="Air2_5_Android" version="3.0" intversion="3.0"></publishobject2>
<path platform="WIN">Air2_5_Android.dll</path>
<path platform="MAC">Air2_5_Android.bundle</path>
<playerdefinitionpath as2="$(UserConfig)/Classes/FP9;$(UserConfig)/Classes/FP8;$(UserConfig)/Classes/FP7" as3="$(AppConfig)/ActionScript 3.0/AIR3.0/airglobal.swc" />
    
    <feature name="multiScreenPublish" supported="false" />
    <feature name="mobileDebug" supported="true" />
    <feature name="apolloPublish" supported="true" />
    <feature name="apolloTestMovie" supported="force"/>
    <feature name="apolloDebugMovie" supported="true"/>
    <feature name="apolloPackaging" supported="true"/>
    <feature name="publish_localPlaybackSecurity" supported="false" />
    <feature name="publish_hardwareAcceleration"      supported="true" />
    <feature name="useDefineFont4ForDeviceText"          supported="true" />
    <feature name="useDefineFont4ForEmbeddedFonts"       supported="true" />
    <feature name="textLayoutFramework"       supported="true" />
    <feature name="rslLinkageSuppressed"       supported="true" />
    <encodingpresets>
<preset uuid="0c95a8ba-8b71-44d5-b269-8fd1cf89a6ed" name="F4V - Same As Source (Flash 9.2 and Higher)" ext="f4v" default="true"/>
</encodingpresets>
</player>
</players>
Hope it's should work for you.
Thank,

How can I use a file in flash cs6 that I made in flash cs5.5 air for android

I have made an app in in air for android in flash cs5.5 air for android, and I want to edit it in cs6 and play it in cs6.
But if I put Ctrl+Enter I got an error: createWin process failed with error 2: system couldn't find the file. I think the problem is that I'am using air for android 2.6 version in flash cs5.5 and version 3.2 in flash cs6. I have searched the web and found out that you can add older air versions using the sdk manager and I have tried it but first I get the error that the version of the sdk I am trying to install is not valid and after some files that I added to the sdk folder I get this error:Only SDK higher than version 3.4.2540 may be added.
I there a possible way to update the air for android for an fla or apk? Or how can I let my originally file work fine in flash cs6??

system couldn't find the file
If you can´t get a more specific hint why your project can´t compile then I can think of some reasons theis error might occur
1.You had files included besides the swf, like videos, audio files, xml files, that are not present in the place air expects them to be
2.somewhere in your createWin functions there is a class import needed that isn`t present in 3.2 anymore, for example some classes or functions from classes that were valid in 2.6 are not any more in 3.2
3. to achieve better eror logging, allow for debugging in the publishing options and see what specific lines in your code throw the error
4.any air app needs a cert file, this needs to be created once, if you migrated to e new system it might be you never created that file which air expects to even begin the compiling process
once you isolate the problem, report back

Air SDK in Flash CS5

Similar Messages

Maybe you are looking for