Air SDK version 15.0.0.249 gives blank screen

Hi Guys,
I really need your help.
I have been working on an Air ios app for the last months. I have build the app with 14.0.0.137 and that seems to work fine.
However today i upgraded to 15.0.0.249 and still it works fine in the Flash CC IDE.
But when I install in on an device the app installs allright but when I run the app all it shows me is a blank/white screen !
Any help is greatly appriciated..I am totally lost here.
Thanks in advance.
/Henry

If you read this long thread:
Need to submit iPad app today [HELP]
you'll see how you can get the command line that Flash Pro uses.
Back to your main issue here, what happens if you do a debug test movie, onto the device? Generally you only get blank screens if a script error happens, and doing a debug test might show what line is failing.

Similar Messages

  • After overlaying Air SDK 3.6, iOS projects show a blank screen after startup.

    Hi,
    I recently overlaid Air 3.6 in Flash Builder 4.7.  My projects are using stage3D via Starling.  Using the 3.4 SDK that comes installed with FB 4.7, my projects compiled and run fine with both debug and release builds.  After overlaying the 3.6 SDK, the projects work fine in the simulator and on Android but when I run the projects on iOS I get a blank screen.  I reverted to the 3.4 SDK and my projects work fine on iOS.  But, I'd like to be able to have access to the features of 3.6, any and all suggestions would be very much appreciated.
    Thank you for you time.
    Chris

    Did you follow these exact directions?
    http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html
    (They changed recently and are updated for Flash Builder 4.7)
    For step 4, all you have to do is create the blank strip folder - don't need to copy the other files with 4.7 and AIR SDK 3.6.

  • Startx & gdm give blank screen

    I'd like to get GNOME installed for a GUI environment. Proving difficult. Anybody have any idea how to help me?
    typing "startx" gives blank screen
    setting "systemctl enable gdm" gives blank screen after boot
    setting "systemctl start gdm" gives blank screen
    I installed brand new Arch (2014.10.01) following the wiki step by step. Everything worked okay. So I set out to get gnome installed.
    To install gnome, I installed:
    xorg-server
    xorg-xinit
    xf86-video-intel
    libva-intel-driver
    libva
    lib32-mesa-libgl (after uncommenting pacman.conf)
    gnome (with all 1-40)
    I tried adding "exec gnome-session" to the ~./xinitrc file and then rebooting but this did nothing.
    Did I miss installing something? Some file need configuring?
    By the way, how do I get internet at boot automatically without having to type "dhcpcd <ethernet-adapter-name here>" after every boot?

    bzpnbx wrote:
    I'd like to get GNOME installed for a GUI environment. Proving difficult. Anybody have any idea how to help me?
    typing "startx" gives blank screen
    setting "systemctl enable gdm" gives blank screen after boot
    setting "systemctl start gdm" gives blank screen
    I installed brand new Arch (2014.10.01) following the wiki step by step. Everything worked okay. So I set out to get gnome installed.
    To install gnome, I installed:
    xorg-server
    xorg-xinit
    xf86-video-intel
    libva-intel-driver
    libva
    lib32-mesa-libgl (after uncommenting pacman.conf)
    gnome (with all 1-40)
    I tried adding "exec gnome-session" to the ~./xinitrc file and then rebooting but this did nothing.
    Did I miss installing something? Some file need configuring?
    By the way, how do I get internet at boot automatically without having to type "dhcpcd <ethernet-adapter-name here>" after every boot?
    Not sure how to fix it, but you should need the base install, xorg-server, gnome, and I usually include the option xorg-server-utils but that shouldn't be needed?
    At that point you should be able to enable/start GDM and if everything goes good it will work. Obviously not your case, I just say this to point out that so far your not wrong...
    No idea on that one, but first I would be looking at making sure I had the right video drivers for xorg (see the xorg wiki page about identifying video card with 'lspci | grep -e VGA -e 3D' ), and look up the logs to see what X is actually doing and if its running and just outputing to the wrong display or if there are errors, ect...
    Internet kind depends on how/what your trying to do, however in your case the most normal thing would likely be to install network manager, then you will probably also have to download a gnome network manager applet (I think its network-manager-applet)
    This will give you the normal system tray icon to manage your network manager settings.
    With only a command line I typically prefer wifi-menu for ease.

  • After iOS7 upgrade, iTunes only gives blank screens.  And Netflix won't load.  Any idea on what to do?

    After iOS7 upgrade, iTunes only gives blank screens.  And Netflix won't load.  Any idea on what to do?

    Yep. I did some more poking around and found that one. Downloaded it and tried to run it and got more errors. Did some more searching and found a fix for the installer on Vista. Ran the fix and tried the ipod software again. It got further, but then hung up again. I'm still trying to figure this all out. Anyone got any answers it'd be much appreciated.

  • Which AIR SDK versions will run which iOS versions

    Where can I find information about which AIR SDKs can target each version of iOS.
    Specifically, we are updating our app from AIR SDK 3.4 to the current 3.7; however, we aren't sure which versions of iOS the new SDK will work with.
    There is an air faq (http://www.adobe.com/products/air/faq.html#) which states that "Adobe AIR 3.5 supports iOS 6", but my question concerns how an AIR app produced for the newer iOSs will run under older iOSs.
    Thanks!

    iCloud Mail setup, even in 10.4/10.5…
    IMAP (Incoming Mail Server) information:
              ▪          Server name: imap.mail.me.com
              ▪          SSL Required: Yes
              ▪          Port: 993
              ▪          Username: [email protected] (use your @me.com address from your iCloud account)
              ▪          Password: Your iCloud password
    SMTP (outgoing mail server) information:
              ▪          Server name: smtp.mail.me.com
              ▪          SSL Required: Yes
              ▪          Port: 587
              ▪          SMTP Authentication Required: Yes
              ▪          Username: [email protected] (use your @me.com address from your iCloud account)
              ▪          Password: Your iCloud password

  • Overlaying adobe air sdk 13 for flex mobile project gives me error

    After overlaying adobe air sdk in flash builder 4.6 i am getting this error in my flex mobile project "Could not resolve <s:ViewNavigatorApplication> to a component implementation.". I have followed the steps mentioned on adobe site. Can anyone please suggest me what i need to do in order to get this work.

    You are probably missing the updated flash debug player that describes all the new methods to the application.
    There is a good walkthrough of how to upgrade flash builder to a new library version, this is described in the first video of hsharma's starling tutorials.
    Its very annoying though, i wish adobe would really build in a feature like this to update libraries.

  • GE60 Wont Boot and F3 Recovery gives blank screen

    Hi,
    I purchased a MSI GE60 yesterday. On the second reboot the system said it was updating the system and during this time, the laptop went into sleep mode. Now every time I power up the laptop one of 2 things happens.
    1) it gives me the MSI logo and the spinner for about 20 minutes then says it is repairing windows. Gets to about 6% after about a further 20 minutes and then turns off.
    2) it gives me the MSI logo and the spinner for about 10 minutes and then powers off
    In both cases the Blue Turbo light stays on all the time.
    I have tried using the F3 Recovery. I get the MSI Logo and the spinner and a message saying it is preparing to repair windows. This lasts for about 10 seconds and then I get a blank screen. The screen stays blank for about 15 -20 minutes and then the laptop powers down.
    Does anyone have any advice about how I can get the system recovery to work.

    Quote from: prestondocks on 03-August-13, 22:27:05
    Hi,
    I purchased a MSI GE60 yesterday. On the second reboot the system said it was updating the system and during this time, the laptop went into sleep mode. Now every time I power up the laptop one of 2 things happens.
    1) it gives me the MSI logo and the spinner for about 20 minutes then says it is repairing windows. Gets to about 6% after about a further 20 minutes and then turns off.
    2) it gives me the MSI logo and the spinner for about 10 minutes and then powers off
    In both cases the Blue Turbo light stays on all the time.
    I have tried using the F3 Recovery. I get the MSI Logo and the spinner and a message saying it is preparing to repair windows. This lasts for about 10 seconds and then I get a blank screen. The screen stays blank for about 15 -20 minutes and then the laptop powers down.
    Does anyone have any advice about how I can get the system recovery to work.
    Hi!
    I have a GE60 2oc and had the same problem and found out that it is because the notebook is delivered with nearly 30 language packs and at each restart windows remove 1 (ONE) language pack. I.e. it takes 30 restarts to get rid of all the unused language packs.
    If you run lpksetup as administrator you can delete the language packs you do not need. However it do take a lot of time to do, but you get rid of them in one go!
    Kurt

  • Clicking Google search results in a frame gives blank screen

    The back story to this is that i use Firefox and I use a simple frames home page where my fave links(ebay,craigslist links mainly) are on the left frame of the screen and google opens up on the right frame. When I do a search with google it does what it does and gives me its search results. Normally when i click on one of the Google results the frame on the left stays and the right side goes to the link i clicked on. Not today though. All I get is a blank screen and Done in the status bar. The left frame is still there. This occurs on 2 computers. IE does not have a problem. Is it Google? Firefox? Or a combo of both?
    Here's the code for my main frames page. I dont need to include the 2nd one.
    1.htm
    == This happened ==
    Not sure how often
    == May 25th, 2010

    On this forum you need to use the HTML entity '''&amp;lt;''' for "'''&lt;'''" and '''&amp;gt;''' for "'''&gt;'''".
    Use the CODE button after you have selected the text to put the text in a CODE block
    A good place to ask questions and advice about web development is at the MozillaZine Web Development/Standards Evangelism forum.
    The helpers at that forum are more knowledgeable about web development issues.
    You need to register at the MozillaZine forum site in order to post at that forum.
    See http://forums.mozillazine.org/viewforum.php?f=25

  • MSI K8N TV tuner card gives blank screen?

    Now besides other problems, My TV tuner card, that has and still does , run perfectly normal in every other board I have. Abit KV8, KV8-Pro, and NF7S, gives me black blank screen after watching it for more than 5 minutes. I have never had any such problems before. I have read all support at Hauppage and found no mention of this problem.
    When I take it out of this board and put it into another machine, it works perfect.
    Help please.
    MSI K8N Neo MS-7030
    1.4 Bios
    Radeon 9800
    Corsair 3200XL and tried Muchkin Special222
    Maxtor Diamond Plus
    Hauppage TV Tuner Card
    Win XP-Pro
    All normal updates etc, graphics drivers, DX9c
    Never had this many problems with a Mobo since using cheapo Elite MB.

    I have been seeing some amazing video using my msi TV-Tuner card (older card) and HDTV S-video inputs from my digital HDTV cable box.  I understand what SteveK is saying about how S-video is not capable of displaying 1080i, but dang it looks awesome using dscaler.  I did some searching and this guys says:
    A better solution is S-video. Almost all players have s-video output. S-video looks much better than composite video, and only slightly inferior to component video. Hook an s-video cable from the player to the display (or to an A/V receiver that can switch s-video). The round, 4-pin connectors may be labelled Y/C, s-video, or S-VHS.
    Link found here:  http://www.home-theater-faq.com/whats_the_difference_between_composite_s-video_component_and_rgb_video.htm
    Anyway I found some similar links that said about the same.  In any case, if anyone wants to play with the HDTV viewing using dscaler and an HDTV s-video connection, it might be of interest.

  • Which AIR SDK version does Flash Builder 4 come with

    I have both Flex Builder 3 and Flash Builder 4 and would like to experiment with the AIR 2 Beta SDK.
    Does Flash Builder 4 (since it's new) already come with AIR 2, or what do I do to have access to the AIR 2 SDK.
    I'm working with the Eclipse plugin edition if that makes any difference, but answers from non-eclipse users are equally appreciated.

    The SDKs you get from Adobe (unless specified) come with Air 1.5
    If you want the Air 2 beta SDK (http://labs.adobe.com/downloads/air2.html) You have to get the Flex SDK of choice (http://opensource.adobe.com/wiki/display/flexsdk/Flex+SDK) and the Air 2 SDK. You then overlay it on the Flex SDK (Using the instructions from the previous post)
    Keep in mind that we have no idea when Adobe will decide to release Air 2, so if you are developing for it, you might have to wait on your release until they are ready. On top of that, you cannot have a user auto-update from air2beta to air2release. Basically, you can only "play" with it for now

  • An iFrame using the Youtube API (which worked fine in previous versions) is now reverting to a blank screen when I try to use it

    Basically the iFrame interfaces with Youtube and allows me to log in/authenticate and then upload/browse/edit my videos.
    Now, when clicking along to authenticate with Youtube, I am taken to a completely blanked out iFrame. :/
    Since this worked perfectly fine in earlier versions of Firefox -- is there any way to download and re-install an earlier iteration, or will the team please fix this bug?

    I have a similar issue -- using an embedded google form rendered as an iframe. It is present in the source, but displays as blank space.
    This problem seems to be confined to Mac OS X (I'm on 10.6.3), and I didn't have this problem with FF 3.6.x (not sure if I ever had 3.6.9, or what version I had prior to 3.6.10). The issue is not present in Chrome or Safari, or on 3.6.10 on Windows 7.0 I believe

  • ACPI Flash BIOS version 2.60 Update Problem cause Blank Screen on Qosmio X505-Q870 HELP Needed!

    I have a Qosmio X505-Q870 that I bought 3 months ago. I updated to ACPI Flash BIOS version 2.60 today, as suggested by the Toshiba installation tools. I ran the update in Windows 7( didn't know this is dangerous) and it successfully completed, before it shuts down normally. When I try ti turn it on, the power LED is on, but the screen is blank. I tried to turn it off by pressing the power button for 20 seconds, but the computer would not turn off. What should I do now?

    I have a Qosmio X505-Q870 that I bought 3 months ago. I updated to ACPI Flash BIOS version 2.60 today, as suggested by the Toshiba installation tools. I ran the update in Windows 7( didn't know this is dangerous) and it successfully completed, before it shuts down normally. When I try ti turn it on, the power LED is on, but the screen is blank. I tried to turn it off by pressing the power button for 20 seconds, but the computer would not turn off. What should I do now?

  • ACE 4710 Device Manager Gives Blank Screen

    Hi Guys,
    Wish somebody could share his/her experience on this.
    I have a problem with ACE4710 Device Manager that after entering username and password, it will appear just a blank screen. And it happen also to the FT peer.
    I know that the workaround is to reload the ACE (as it happened one time before) but I wish somebody could share a better or probably permanent solution to this problem.
    Thank you in advance guys.
    Tomy.

    CSCsv95366: Device Manager displays a blank page after login
    Upgrade to A3(2.2) or beyond.
    Gilles.

  • Transaction launcher gives blank screen

    Hii All
    I have configured a TL to launch Tx. - crmd_order(CRM)  but it displays a blank screen.
    I have already tried the following (by referring to SDN posts) :-
      1.  Notes 1620007 and 1521043 are already implemented in our system.
      2.  Maintained proper URL in CRMS_IC_CROSS_SYS. It is wokring fine when opened directly in IE.
      3. Activated and tested the relevant ITS services (SICF).
      4. In sicf service, the  SAP implementation area is selected as "Signature Design" ( from the posts i found that if thevalue          is "Netweaver Classic" then the blank screen issue  comes).
      5. Executed the report to publish ITS services : SIAC_PUBLISH_ALL_INTERNAL.
      6. Executed BOR object in swo1. It is wokring fine.
    But it still displays the blank screen. Please suggest some solution or the step which I am missing.
    Thanks in advance.
    Shafali

    Hi Shafali,
    You can find the detailed steps of implementation here:
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4?QuickLink=index&overridelayout=true|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4?QuickLink=index&overridelayout=true]
    Regards
    Leon

  • Full Screen gives blank screen

    Hi,
    When I click the Display Full Screen button on any site, such as YouTube, I get a full blank white screen, and still have the audio playing. Pressing Esc returns to regular display. How can I get the Full Screen to work?
    I have:
    XP
    IE8
    Flash Player 10.2
    Thanks,
    Mike

    Hi mikeytexas, I love it!! You solved your own problem. Great advice by the way
    Glad you posted and especially your solution!!!
    Regards,
    eidnolb

Maybe you are looking for