AIR Sqlite can support online backup from memory to disk??
like this link:
http://www.sqlite.org/backup.html
how can i online backup my Sqlite dataBase from memory to disk?
You will need to remove the internal storage from that 2010-11 MBA, and put it in an external USB3 enclosure for use with a 2014 MBA. The assumption here is that the logic board failure did not corrupt the internal storage contents.
Similar Messages
-
How I can backup from another Hard disk through my Macbook air?
How I can backup datas from another external storage disk by using My Macbook Air?
How I can backup from another hard disk through my Macbook air in Time Capsule?
-
Whole online backup from DB13 failed due to processing error
Hello!
I have difficulty by execution of Whole database online backup from DB13 via FTP on the remote target. The backup goes very slow and breaks after a while.
The BRBACKUP action log looks as follows:
backup_mode ALL
backup_type online
backup_dev_type stage
stage_root_dir /sap/DEVB
compress no
stage_copy_cmd ftp
remote_host 192.168.200.3
remote_user sapbackup
#FILE..... E:\ORACLE\DEV\SAPDATA2\SR3_10\SR3.DATA10
#SAVED.... /sap/DEVB/bdwkuudu/SR3.DATA10 #1/6
BR0280I BRBACKUP time stamp: 2007-10-23 01.44.35
BR0063I 6 of 41 files processed - 12000.047 MB of 93092.766 MB done
BR0204I Percentage done: 12.89%, estimated end time: 23:06
BR0001I ******____________________________________________
BR0202I Saving E:\ORACLE\DEV\SAPDATA2\SR3_6\SR3.DATA6
BR0203I to /sap/DEVB/bdwkuudu/SR3.DATA6 ...
#FILE..... E:\ORACLE\DEV\SAPDATA2\SR3_6\SR3.DATA6
#SAVED.... /sap/DEVB/bdwkuudu/SR3.DATA6 #1/7
BR0280I BRBACKUP time stamp: 2007-10-23 02.38.05
BR0063I 7 of 41 files processed - 14000.055 MB of 93092.766 MB done
BR0204I Percentage done: 15.04%, estimated end time: 21:36
BR0001I ********__________________________________________
BR0202I Saving E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7
BR0203I to /sap/DEVB/bdwkuudu/SR3.DATA7 ...
<b>BR0278E Command output of 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkuudu.ftp -b -c put E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 /sap/DEVB/bdwkuudu/SR3.DATA7':
Connected to 192.168.200.3 Port 21.
220-FTP server ready.
220 This is a private system - No anonymous login
331 User sapbackup OK. Password required
230-User sapbackup has group access to: administrator
230-This server supports FXP transfers
230-OK. Current restricted directory is /
230-************************************************
230-* Use SITE command to change client codepage: *
230-* ie, site codepage [client codepage] *
230 ************************************************
200 TYPE is now 8-bit binary
200 PORT command successful
150 Connecting to port 4977
NiWrite error: -6, bytes to send: 32767 bytes written: 0
BR0280I BRBACKUP time stamp: 2007-10-23 03.08.37
BR0279E Return code from 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkuudu.ftp -b -c put E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 /sap/DEVB/bdwkuudu/SR3.DATA7': 1
BR0222E Copying E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 to/from /sap/DEVB/bdwkuudu/SR3.DATA7 failed due to previous errors </b>
BR0280I BRBACKUP time stamp: 2007-10-23 03.08.43
BR0317I 'Alter tablespace PSAPSR3 end backup' successful
BR0056I End of database backup: bdwkuudu.ans 2007-10-23 03.08.37
BR0280I BRBACKUP time stamp: 2007-10-23 03.08.43
BR0054I BRBACUP terminated with errors
Any helpful information will be appreciated.
regards!
Thomthis post is duplicated at Re: Backup to remote stage failed due to RFC error
please only post your question once and only in 1 forum.
thanks. -
Online Backup from Tape failed
Hi All
We are trying to restore the online backup from tape the backup device is Netbackup Utility
Please find below the log
BR0280I BRRESTORE time stamp: 2011-01-07 16.13.44
BR0229I Calling backup utility with function 'restore'...
BR0278I Command output of '/usr/sap/QC4/SYS/exe/run/backint -u PC4 -f restore -i /oracle/QC4/sapbackup/.reeypwkq.lst -t file -p /oracle/QC4/102_64/dbs/initQC
4.utl':
Program: /usr/sap/QC4/SYS/exe/run/backint 5.0GA
Input File: /oracle/QC4/sapbackup/.reeypwkq.lst
Profile: /oracle/QC4/102_64/dbs/initQC4.utl
Function: RESTORE
BR0386E File '/oracle/PC4/sapdata1/pc4_1/pc4.data1' reported as not found by backup utility
BR0386E File '/oracle/PC4/sapdata2/pc4_103/pc4.data103' reported as not found by backup utility
BR0386E File '/oracle/PC4/sapdata1/pc4_64/pc4.data64' reported as not found by backup utility
BR0386E File '/oracle/PC4/sapdata2/pc4_116/pc4.data116' reported as not found by backup utility
BR0386E File '/oracle/PC4/sapbackup/cntrlPC4.dbf' reported as not found by backup utility
BR0280I BRRESTORE time stamp: 2011-01-07 16.13.47
BR0279E Return code from '/usr/sap/QC4/SYS/exe/run/backint -u PC4 -f restore -i /oracle/QC4/sapbackup/.reeypwkq.lst -t file -p /oracle/QC4/102_64/dbs/initQC4
.utl': 2
BR0374E 0 of 161 files restored by backup utility
BR0280I BRRESTORE time stamp: 2011-01-07 16.13.47
BR0231E Backup utility call failed
BR0406I End of file restore: reeypwkq.rsb 2011-01-07 16.13.47
BR0280I BRRESTORE time stamp: 2011-01-07 16.13.47
BR0404I BRRESTORE terminated with errors
Please help us out in rsloving this error
Regards
John N>
John Namala wrote:
> BR0278I Command output of '/usr/sap/QC4/SYS/exe/run/backint -u PC4 -f restore -i /oracle/QC4/sapbackup/.reeypwkq.lst -t file -p /oracle/QC4/102_64/dbs/initQC
Hi,
you are restoreing PC4 database on system QC4.
This requires a netbackup permission configuration to allow client QC4 to access the backup from system PC4.
Volker -
How reman backup the blocks being written from memory to disk
Hi All,
I am thinking about one case when backuping the datafiles with RMAN.
That is the rman is about to backup block A when this block is being written by DBWR from memory to disk.
Let's assume the writing is just partially done. What will RMAN do in this case?
1. Wait until the writing is done and back it up
2. Backup what RMAN sees at that time
I am just wondering whether the choice 2 will leave the block inconsistent and so be taken as corrupt when restored.
Best regards,
Leonuser12064076 wrote:
Hi All,
I am thinking about one case when backuping the datafiles with RMAN.
That is the rman is about to backup block A when this block is being written by DBWR from memory to disk.
Let's assume the writing is just partially done. What will RMAN do in this case?
1. Wait until the writing is done and back it up
2. Backup what RMAN sees at that time
I am just wondering whether the choice 2 will leave the block inconsistent and so be taken as corrupt when restored.
Best regards,
LeonHi Leon
That's why if you don't take backup of archived redo log file that was generated after the full backup, the backup is considered "inconsistent". If you use "backup database plus archivelog" command, this means that after backing up the database, RMAN switches redo log files and archives it to make the whole backup "consistent"
Kamran Agayev A.
Oracle ACE
http://kamranagayev.com -
I forgot my restrictions passcode, if I do a restore to new phone in iTunes and change the passcode, can I then backup from a previous restore to put everything back onto my phone.
No you cannot. The restrictions passcode is part of the backup, and if you restore to a backup that contains the restrictions passcode, you will be right back where you started. Only alternative is to restore the device as new, or if you restore to a backup, it has to be before the restrictions passcode was entered into the phone. However, that could mean that you would be restoring to a date that does not contain all of your data.
-
How can i contact backup from iphone to blackberry
how can i contact backup from iphone to blackberry
jatinder pal singh
<Personal Information Edited by Host>Try using one ot the several WiFi transfer apps in the App Store. I do that all the time, back/forth between iPhone and iPad Mini. Works with videos, too.
-
Steps to restore RMAN backups from tape to disk
Hi All,
using Netbackup Veritas Volume
DB:10.2.0.3.0
OS:AIX 64 bit
Could nayone please share the steps to - restore RMAN backups from tape to disk.
An early reply would be appreciated!!
Thanks for your time!
Regards,Hi,
I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
allocated channel: t1
channel t1: sid=2386 devtype=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.4.1.0
Starting restore at 09-MAY-10
channel t1: looking for autobackup on day: 20100509
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/09/2010 11:57:01
ORA-27191: sbtinfo2 returned error
Additional information: 2
RMAN>
Thanks, -
Hi,
How to save SOME time machine Mac backups from the TM disk to other disk WITHOUT formatting the destination disk?
I have a Time Machine disk (A) including the backups of several different Macs (B, C, D & E) generated with an old Mac OS X 10.5.8 (iMac PowerPC) over the years.
I have transferred the old Mac contents to a new Mac with OS X 10.8.3 using Migration Assitant. All OK.
Now, I want to erase such TM disk A to use if for other purposes, but first, I would like to RECOVER the backups of some Macs inside it (D and E). Is that possible WITHOUT formatting the destination disk and selecting only some Macs from the TM disk and not the fulll TM disk? How?
Thanks.Thanks for the reply. I do not think that is messy, anway. I simply used the same external disk as Time Machine disk for different Macs. And that worked OK all the time for years.
The ExternalTimeMachineDisk contains the folder Backups.backupdb
which contains the following folders (each one corresponding to the Time Machine backup made from each Mac):
Mac1
Mac2
MacBook1
MacBook2
In relation to my message above, is it possible to select specific files, folders or full Mac backups from such Time Machine disk and save them to other disk? How?
Thanks. -
Can't restore backup from AT&T iPhone to Verizon iPhone
I have an AT&T iPhone 3Gs and a new Verizon iPhone 4 (different phone numbers). I want to transfer everything from my old phone to my new one, but I haven't been able to restore a backup from one device to the other. The techniques documented in Apple Support article http://support.apple.com/kb/HT2109 did not work for me.
When I first connected the new phone to iTunes to actviate it, I was not given the option to restore from backup as documented in the article. The new phone was activated and then synced, so it picked up apps etc from my old phone, but not the data and settings that can only be restored from a backup.
I tried using the Restore from Backup menu item, but the only backup on the list is the one from the new phone, not the old one (the phones have different names in iTunes). I even tried this with both phones connected to iTunes at the same time, but no luck.
I also tried using iTunes to restore the new phone to its original settings. After I did that, I was given the option to restore from a backup, but once again only the new phone's backup was available on the list.
I'm guessing this is happening because the two phones are from different carriers, but restoring form a backup doesn't overwrite the firmware, so I would think it it's technically possible to move everything from the AT&T phone to the Verizon phone. The support article does say that the instructions are for transferring data to a new phone from the same carrier. but it doesn't explicitly say this can't be done when moving to a new carrier.
I'll eventually be able to get my new phone configured like my new one, but I was hoping I could do this in one shot. Is there some other option for doing this that I'm overlooking?When I sync photos in iTunes, using the iPhoto option, it won't copy pictures from my phone to iPhoto, it just copies imported photos from the iPhoto library to my phone.
Correct - as designed and intended. iTunes does not handle the import of photos from any digital camera including from the iPhone's Camera Roll. When there are photos/videos in your iPhone's Camera Roll, your iPhone is also detected as a digital camera when connected to your computer.
The only imported photos I have are some that I previously imported from my phone, at which point they were converted from the iPhone format to whatever format iPhoto uses.
What?
iPhoto does not convert ANYTHING when importing photos from a digital camera including when importing photos from the iPhone's Camera Roll. There is not an iPhone format for photos and a iPhoto format for photos. Photos captured by the iPhone are in JPEG format, which is not changed by iPhoto when being imported from the iPhone's Camera Roll. iPhoto supports a number of common/open formats and doesn't change the format of anything. iPhoto is a photo viewer and management application.
I don't want those pictures back on my phone, I want my phone's pictures in iPhoto (actually, I just want them on the new phone).
You don't want the photos that are in your previous iPhone's Camera Roll on your new iPhone? OK. The photos in iPhoto on your Mac that you selected to be transferred to your previous iPhone can be selected to be transferred to your new iPhone under the Photos tab for your new iPhone sync preferences with iTunes. If you want the photos that are in the Camera Roll on your previous iPhone available on your new iPhone, you must import these photos from your previous iPhone's Camera Roll with iPhoto. You can then transfer these photos from iPhoto to your iPhone via the iTunes sync/transfer process. This will be the ONLY way you will get these photos available on your new iPhone since you are unable to transfer the backup for your previous iPhone to your new iPhone.
I can use iPhoto to import everything from my old phone, and then sync my new phone from iPhoto, but the images will get converted twice, from iPhone to computer format on the import, and from computer to iPhone format on the sync. If that's a lossless conversion, I guess that's okay, but I was hoping for something more direct.
Wrong. There is no conversion by iPhoto when importing photos from a digital camera including when importing photos from the iPhone's Camera Roll. When transferring photos from iPhoto on your computer via the iTunes sync/transfer process which is selected under the Photos tab for your iPhone sync preferences with iTunes, the photos are optimized for viewing on your iPhone as part of the iTunes sync/transfer process, which cannot be turned off or changed.
And you don't want these photos optimized for viewing on your iPhone why?
It seems iTunes photo sync is only intended to transfer photos from your computer to your mobile device, not the other way around.
Correct, by design and intention. -
Emails missing from Mail - can't access backups from Time Machine
To my dismay both of my gmail accounts through the mail client will only show me emails from the last 30 days. I went to check gmail through Safari and the same story, I'm locked out of emails from before the last 30 days. This is not only on my Mac, but also on my iPad and iPhone.
I attempted to go into Time Machine and do a restore, but the same thing is happening and I'm pretty sure it shouldn't be. For some reason even when Time Machine pulls up my email backups I can see stuff from every year but 2013 and the beginning of 2014. It starts populating the backup to show me my emails, but nothing appears and I know those emails have to exist somewhere.
Does anyone know if this is some kind of code error that caused this, or if there is anyway to get around it? Having an entire year's worth of emails missing is really problematic for me as you can expect. Does anyone know how to remedy this?Time Machine - Troubleshooting E3. I can't see backups for a disk/partition that's no longer connected
-
Can't display values from memory
Hi, all experts
i am having trouble displaying the value that i have imported to memory.
EXPORT keyfgr FROM p_keyfgr TO MEMORY ID 'CM_KEYFGR'.
EXPORT fcst_filedata FROM gt_fcst_filedata[] TO MEMORY ID 'CM_FCST_FILEDATA'.
SUBMIT (g_hlp_progname) WITH fpath = p_fname
WITH vrsioz = p_vrsioz
VIA SELECTION-SCREEN
AND RETURN
When i want to use this value in my other tcode is doesn't display value. pls, help
IMPORT keyfgr TO D FROM MEMORY ID 'CM_KEYFGR'.
IMPORT fcst_filedata TO GTA_fcst_filedata FROM MEMORY ID 'CM_FCST_FILEDATA'.
LOOP AT GTA_fcst_filedata INTO WA_fcst_filedata.
WRITE: / WA_fcst_filedata-FIELD1.
ENDLOOP.Hi sophanith,
please go through the code below.
export p_keyfgr to MEMORY id 'XYZ' .
EXPORT gt_fcst_filedata[] TO MEMORY ID 'ABC'.
SUBMIT (g_hlp_progname) WITH fpath = p_fname
WITH vrsioz = p_vrsioz
VIA SELECTION-SCREEN
AND RETURN.
in Import program u should declare the gt_fcst_filedata[] and keyfgr same as export program.
DATA :gt_fcst_filedata[] TYPE TABLE OF ................
DATA:keyfgr type ...........
IMPORT keyfgr FROM MEMORY ID 'XYZ'.
IMPORT gt_fcst_filedata[] FROM MEMORY ID ' ABC'.
the you can loop the internal table in to work area.
regards Ashwin kv -
Can I restore backup from another mac with time machine?
I would like to restore files from a TM backup from another Mac - is this possible? Thanks.
I'm not sure I know how to help. I use OS X Server's Time Machine services from a Mac Mini to do my back ups to a drive connected to that server. I have the same user account on one MBP Retina that does not do back ups as another MBP Retina that DOES back ups. However, I can't even open the sparse bundle from the one that doesn't do back ups of the one that does (if that makes sense).
You might try and see if this link helps. This guy was the TM guru around here. He might have addressed a solution to what you're trying to do. -
How can I remove backup from time capsule?
I have a new Imac and transferred my documents and settings via time capsule from my previous Imac to my new Imac.
I have removed my account and data etc from my first Imac and gave this one to my daughter.
When trying activate time capsule on my new Imac I can not make backups because there is not enough space.
Also I can not make the machine understand that the backup on the time capsule is from the data on this new Imac.
So my only option? Is to delete all the backups from my timecapsule and start new.
How do I delete the backups from my timecapsule?If you want to completely erase the Time Capsule drive and start over.....
Open AirPort Utility - Click Manual Setup
Click the Disks icon
Click the Disks tab just below the icon
Click Erase
The "Quick Erase" option will only take few moments -
Hello :
When we try plan online backup and offline backup we obtein next result,
BR0252E Function fopen() failed for '/oracle/CR5/sapbackup/bdxxipoo.log' at location file_printout-4
BR0253E errno 2: No such file or directory
External program terminated with exit code 5
We have sap instance and DB machine in differents machines.
Please could you help us ???
ThanksHello,
check the authorization to
/oracle/CR5/sapbackup/
Maybe you are looking for
-
Upgraded iCloud Storage not showing up in iCloud Drive
Hi, I upgraded my iCloud storage to 500 GB a few weeks ago. When I go into iCloud under system preferences I can see that 460GB of that is still available. However, when I try to store things in iCloud Drive on my computer it tells me there is only
-
Required patches not showing in SCCM report, its all ways showing need 0 patches.
Hi, Can any only please help me on this issue. We have a critical server and it is added in SCCM phase for server patching. But now the issue is, In SCCM maintenace window report, its always showing need 0 patches and its no required patches displaye
-
How do i take apart an old Studio Display?
So, my girlfriend and I saw this article where someone has taken apart an old Apple Studio Display and turned it into a groovy little cat bed: http://www.bitrebels.com/geek/the-mac-apple-studio-display-cat-bed-mod/ The problem though is that I can't
-
Mailman does not start up in 10.5.8
I just upgraded my server to 10.5.8. When I started up the server again, the mailing lists did not start. The syslog tail is included. It complains that the Postfix mail system is not running. But a sudo postfix start complains that it is already run
-
ORA-01461: can bind a LONG value ... Please hlep ASAP
In my java code I try to update a table in the db like this: "ps = conn.prepareStatement("update dg_log set ISUPDATED=1,CAUser=? where qnum =? and cid !=3"); " and when i tried to bind a variables to one of the fields like that: " ps.setString(1,"32"