Air Stream 1200 USB modem not work in yosemite

my Air Stream 1200 USB modem not work in yosemite but it work in Windows pc.

May be there is an update available. Contact Air Stream.

Similar Messages

My air stream 1200 usb modem did not support in yosemite

my air stream 1200 usb modem did not support in yosemite

Have you checked for a new driver/updated software?

Alcatel X221S USB modem not working on Yosemite

Hello,
I' ve just installed Yosemite on my macbook pro
and my Alcatel X221S USB modem is not working.
When connected it installed the dashboard but
then after restart it didn't turn on( instead it wanted to
install again all package ).
When I open it from programs it opens( but doesn't respond ).
All the settings for connection are still in network preferences
but when I try to connect from there it says that the device doesn't exist
( the system doesn't see it ).
I tried to install Modem Driver Universal( it's for all alcatel modems
working on mac 64 bit but for Lion os ) from producer's website
but it's not working as well.
The modem is 6 years old and worked well on SnowLeopard,
but now I don't know if I should wait for producer to release new drivers
or buy a new one.
So far no seller was able to assure me that their usb modem would work
on Yosemite.
So if anyone knows something how to make alcatel work on yosemite,
or has USB modem working on Yosemite( without playing with Terminal or
something like that ) please answer!
MacBook Pro mid 2009
2.53 Ghz Intel Core Duo

Hey Dhelios and welcome to the forum -
I read this at their site and it didn't look good. Please note the NOTE:.
Release 3.01 UK - Apple Mac
Mac OS | Mac OSX 10.1-10.3 | Mac OSX 10.4
The ST-330 and ST-USB driver requires BSD support from Mac OSX.
Be sure to enable BSD support during the installation of Mac OSX!!
NOTE: The ST-330 and ST-USB driver does not support Intel based Apple Macs. For Intel based Macs we recommend using an Ethernet modem/router. A list of compatible ST-500 and ST-700 series products is available online here>

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

Follow these steps:
go to system preferences.. Open Network..
CONFIGURATION: DEFAULT
TELEPHONE NUMBER : #99*
leave account name and password columns blank
Now go to ADVANCED
IN MODEM MENU
VENDOR : GENERIC
MODEL : GPRS / 3G
Press ok
Then CONNECT.. Enjoy.

Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

Thanks for your information.
It will help many users that have huawei E3372 with same problem.

ZTE AC2792 USB Modem Not working in RV215W

Dear Sir/Madam
Greeting's from Udayraj Rokad.
I am Udayraj Rokad form India. I have RV215W Router of cisco. Recently i buy ZTE AC2792 USB Modem from MTS service provider company. But When i attached with router that modem not working because of USB module file . Please update and send us ZTE AC2792 USB module file so we can use that modem and enjoy internet speed .

Hi Udayraj. Unfortunately, cellular Internet access here in the US is not as prevalent as it is there in India. Hence, there probably won't be any update to the router anytime soon. My suggestion would be to use a supported usb modem or to get a different router to connect to the modem and then connect that router to the rv215. Good luck!
Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com

CDMA USB Modem Not Working After Mavericks Install

I use my LG VX9100 (Env2) as a CDMA USB internet modem, and it worked fine in Mountain Lion on a Mid 2012 Macbook Air and all other Macs I tried it with. After upgrading to Mavericks, I am not allowed to initiate a connection because the I get a message of "No SIM" after it tries to initialize from the menubar. The phone works fine and I have confirmed that all of the settings are the same. The phone is on Verizon, so the phone has never had a SIM card. This all worked prior to the Mavericks install, so it appears to be a bug. Any suggestions of what to try?

Hi, no drivers were required in the past, basically just had to type in the phone number as the account name followed by @vzw3g.com and enter VZW as a password and it would connect right up using the built in cell data of the phone plan. Only works with dumbphones as far as I know.
So, unless mavericks is subtracting features rather than adding them, the built in drivers should still be there. I have tested it with 10.6 through 10.8 and settings are accesable via the "Network" PrefPane and it always recognized it from a fresh install of OSX. The following article suggests that they have been built into OSX since OS 10.2:
http://www.engadget.com/2005/01/18/how-to-use-your-cdma-cellphone-as-a-usb-modem /
That article was written in 2005 and said that some carriers would need a driver, but I know for sure that more were added since then as I have used built in drivers from 10.6 to 10.8.
Windows may need drivers, but mac has had most CDMA drivers built in for over 10 years now. The VX9100 uses a generic vendor driver, but OSX had selections for most major cell phone manufacturers built in for any custom requirements. There just doesn't seem to be a reason to get rid of the feature now.
Given the fact that it does show up in the menubar like it used to shows that the mac can tell that it is a modem and has the drivers there, but they aren't working properly.

ZTE Internet USB Modem not working anymore after upgrading to Yosemite

Hello!
Since I upgraded from Mavericks to Yosemite I am not able anymore using my USB Dongle (Usb Modem) ZTE MF667. During the upgrade Yosemite did not show any warning about its incompatibility. Is there a way to make this USB modem work as it did on Mavericks? ZTE and my Mobile operator wont help!
Thanks!!

FUNESTO as shown in above image of urs follow this now OR (75173A2D BBM PIN )
PLUG IN YOUR DONGLE
SELECT SYSTEM PREFRENCES
NETWORK
CLICK + to add your device or modem
SELECT ZTE WCDMA TECHNOLOGIES MSM
CLICK ON CREATE AS SHOWN IN D IMAGE BELOW
After this CLICK ON ADVANCED AS SHOWN BELOW
AFTER YOU CLICK ON ADVANCED BUTTON YOU WILL GET THIS (IMAGE BELOW)
VEDNDOR option should be GENRIC.. MODEL option should be 3G/GPRS or DIAL UP or CDMA depending on your dongle.. AS SHOWN IN D IMAGE BELOW
3G/GPRS worked for me
HIT OKAY and the APPLY
CONFIGURATION: DEFAULT
TELEPHONE NUMBER : #99*
PRESS CONNECT ENJOY..
SEE I GOT IT CONNECTED..

Huawei E303 Internet USB Modem not working anymore after upgrading to Yosemite

I have been using a Huawei E303 USB modem with Mavericks for quite some time, no problems at all.
After upgrading to Yosemite, the device is not even detected.
Can anybody help?
Thanks in advance

I just found a solution:
Simply download the zip file from
http://www74.zippyshare.com/v/54915703/file.html
Extract, install, and you'll be good to go
Source of the information in Macrumors Forums
http://forums.macrumors.com/showthread.php?p=20268220&posted=1#post20268220

Usb port not working after yosemite update please help

ive got an early 2011 macbook pro i5. and one of my usb stopped working. if i reset my computer it works for a while and then stops again. all these after yosemite update please i really need help on this.. and also when ever im in the middle of something it keeps crashing and saying these things below after i booting back up. ive tried several things, didnt work, tried repairing disk permissions. please anybody with any idea help me!
Anonymous UUID:
CCC4DCA9-48E9-4692-250B-488588FCC69E
Sun Nov 9 17:58:17 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff802a005eb2): "Possible memory corruption: pmap_pv_remove(0xffffff803b8db998,0x7fff7360f000,0x6d654, 0x6d654d64, 0xffffff8031663cc4, 0xfffffeb38ae0f078): null pv_list!"@/SourceCache/xnu/xnu-2782.1.97/osfmk/i386/pmap_internal.h:768
Backtrace (CPU 0), Frame : Return Address
0xffffff8031663b80 : 0xffffff8029f3a811
0xffffff8031663c00 : 0xffffff802a005eb2
0xffffff8031663cf0 : 0xffffff802a0065e5
0xffffff8031663d50 : 0xffffff8029fb6b4a
0xffffff8031663e60 : 0xffffff8029facd2c
0xffffff8031663e90 : 0xffffff8029f5c747
0xffffff8031663ed0 : 0xffffff802a3c45ff
0xffffff8031663f40 : 0xffffff802a3c425c
0xffffff8031663f50 : 0xffffff802a44dcb2
0xffffff8031663fb0 : 0xffffff802a03ac46
BSD process name corresponding to current thread: suhelperd
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:
0x0000000029c00000
Kernel text base: 0xffffff8029e00000
__HIB text base: 0xffffff8029d00000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 7052072843826
last loaded kext at 6483411185500: com.huawei.driver.HuaweiDataCardActivateDriver    1.0.12 (addr 0xffffff7fac6ba000, size 16384)
last unloaded kext at 6604174049015: com.apple.driver.AppleUSBCDC    4.2.2b5 (addr 0xffffff7fac717000, size 16384)
loaded kexts:
com.huawei.driver.cdc_ncm    2.7.2f16
com.huawei.driver.dc_net    1.0.2
com.huawei.driver.cdc_acm    2.6.2f17
com.huawei.driver.cdc_usb_bus    1.0.3
com.huawei.driver.HuaweiDataCardDriver    4.25.45
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AudioAUUC    1.70
com.apple.driver.AGPM    100.14.37
com.apple.filesystems.autofs    3.0
com.apple.iokit.IOBluetoothSerialManager    4.3.0f10
com.apple.driver.AppleOSXWatchdog    1
com.apple.driver.AppleMikeyHIDDriver    124
com.apple.driver.AppleHDA    266.5
com.apple.driver.AppleMikeyDriver    266.5
com.apple.driver.AppleSMCLMU    2.0.4d1
com.apple.driver.ApplePolicyControl    3.7.21
com.apple.driver.AppleLPC    1.7.3
com.apple.driver.AppleUpstreamUserClient    3.6.1
com.apple.iokit.IOUserEthernet    1.0.1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleHWAccess    1
com.apple.driver.AppleHV    1
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.AppleIntelHD3000Graphics    10.0.0
com.apple.driver.AppleIntelSNBGraphicsFB    10.0.0
com.apple.driver.AppleBacklight    170.4.12
com.apple.driver.AppleMCCSControl    1.2.10
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.3.0f10
com.apple.driver.AppleSMCPDRC    1.0.0
com.apple.driver.AppleThunderboltIP    2.0.2
com.apple.driver.SMCMotionSensor    3.0.4d1
com.apple.driver.AppleUSBTCButtons    240.2
com.apple.driver.AppleUSBTCKeyboard    240.2
com.apple.driver.AppleIRController    327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    35
com.apple.iokit.SCSITaskUserClient    3.7.0
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.6.5
com.apple.driver.AppleUSBHub    705.4.1
com.apple.iokit.AppleBCM5701Ethernet    10.1.2b3
com.apple.driver.AppleFWOHCI    5.5.2
com.apple.driver.AppleSDXC    1.6.5
com.apple.driver.AirPort.Brcm4331    800.20.24
com.apple.driver.AppleAHCIPort    3.0.7
com.apple.driver.AppleUSBEHCI    705.4.14
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleACPIButtons    3.1
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleACPIEC    3.1
com.apple.driver.AppleAPIC    1.7
com.apple.driver.AppleIntelCPUPowerManagementClient    218.0.0
com.apple.nke.applicationfirewall    161
com.apple.security.quarantine    3
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    218.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice    3.7.0
com.apple.iokit.IOUSBMassStorageClass    3.7.0
com.apple.AppleGraphicsDeviceControl    3.7.21
com.apple.kext.triggers    1.0
com.apple.iokit.IOSerialFamily    11
com.apple.driver.DspFuncLib    266.5
com.apple.kext.OSvKernDSPLib    1.15
com.apple.iokit.IOAudioFamily    200.6
com.apple.vecLib.kext    1.2.0
com.apple.driver.AppleHDAController    266.5
com.apple.iokit.IOHDAFamily    266.5
com.apple.iokit.IOFireWireIP    2.2.6
com.apple.driver.AppleSMBusPCI    1.0.12d1
com.apple.iokit.IOSurface    97
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.AppleGraphicsControl    3.7.21
com.apple.driver.AppleBacklightExpert    1.1.0
com.apple.iokit.IONDRVSupport    2.4.1
com.apple.driver.AppleSMBusController    1.0.13d1
com.apple.iokit.IOGraphicsFamily    2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.3.0f10
com.apple.iokit.IOBluetoothFamily    4.3.0f10
com.apple.driver.IOPlatformPluginFamily    5.8.0d49
com.apple.iokit.IOUSBUserClient    705.4.0
com.apple.driver.AppleSMC    3.1.9
com.apple.driver.AppleUSBMultitouch    245.2
com.apple.iokit.IOUSBHIDDriver    705.4.0
com.apple.driver.AppleUSBMergeNub    705.4.0
com.apple.driver.AppleUSBComposite    705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.7.0
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.7.0
com.apple.driver.AppleThunderboltNHI    3.1.7
com.apple.iokit.IOThunderboltFamily    4.2.1
com.apple.iokit.IOEthernetAVBController    1.0.3b3
com.apple.iokit.IOFireWireFamily    4.5.6
com.apple.iokit.IO80211Family    700.52
com.apple.driver.mDNSOffloadUserClient    1.0.1b8
com.apple.iokit.IONetworkingFamily    3.2
com.apple.iokit.IOAHCIFamily    2.7.0
com.apple.iokit.IOUSBFamily    705.4.14
com.apple.driver.AppleEFINVRAM    2.0
com.apple.driver.AppleEFIRuntime    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    300.0
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleMobileFileIntegrity    1.0.5
com.apple.driver.AppleCredentialManager    1.0
com.apple.driver.DiskImages    389.1
com.apple.iokit.IOStorageFamily    2.0
com.apple.iokit.IOReportFamily    31
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    3.1
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
com.apple.kec.Libm    1
com.apple.kec.pthread    1
Model: MacBookPro8,1, BootROM MBP81.0047.B04, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f96
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 2 incoming serial ports
Serial ATA Device: ST9320325ASG, 320.07 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: Hub
USB Device: HUAWEI Mobile
USB Device: IR Receiver
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, 20080d.0

I have the same problem when I updated to OS X 10.10 I lost both my USB ports as far as they will not recognize anything that I plug into them. The power part of the USB seams to work since it will recharge my Striiv Touch but nothing shows up when you connect anything to the ports.
I have tried a number of things from rebooting, trying other usb devices that work on other systems with no problems but will not work on my Macbook Pro.
Any Help out there?
Hardware Information: ℹ️
MacBook Pro (Retina, 15-inch, Late 2013) (Verified)
MacBook Pro - model: MacBookPro11,3
1 2.3 GHz Intel Core i7 CPU: 4-core
16 GB RAM Not upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:43:41
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad

Speedtouch USB modem not working on MAC OS X(10.4.6) but fine on windows BC

Hi all, i have speedtouch usb, which is almost the equivalent to speedtouch 330. i went on to http://www.thomson-broadband.co.uk/codepages/content3.asp?c=7&ProductID=471 to obtain the driver for mac os 10.4.
however, even after installing the driver, my modem simply cannot register its connection to the mac book. there is only red blinking light from 1 side of the 2 signals on the modem.
when i shifted over to windows xp home ed via bootcamp 1.4, the modem connected fine ( with 2 green lights from the 2 signals on the modem ) after the driver for windows xp was installed.
is there an additional program that i can install to have speedtouch usb compatible with the mac os?

Hey Dhelios and welcome to the forum -
I read this at their site and it didn't look good. Please note the NOTE:.
Release 3.01 UK - Apple Mac
Mac OS | Mac OSX 10.1-10.3 | Mac OSX 10.4
The ST-330 and ST-USB driver requires BSD support from Mac OSX.
Be sure to enable BSD support during the installation of Mac OSX!!
NOTE: The ST-330 and ST-USB driver does not support Intel based Apple Macs. For Intel based Macs we recommend using an Ethernet modem/router. A list of compatible ST-500 and ST-700 series products is available online here>

USB Modem not being recognised in OSX

Sorry if this is being posted in the wrong forum.
I have an oldish Usb modem (Intel(R) AnyPoint(R) DSL Modem 3240 http://www.intel.com/support/network/dslmodems/sb/CS-009978.htm) that I have been using for a while with my PC laptop.
I have recently updated to a MacBook and was expecting this modem to be fine since it has worked succesfully with a friends older iBook (he simply plugged in the usb cable and was able to connect to the internet once I gave him the Username/Password. No software installation was required) but on my MacBook the modem doesnt seem to be recognised.
I have followed the install instructions to the letter but when it comes to plugging in the usb modem nothing happens and no modem is found (the l.e.d on the front of the modem stays off)
If anyone has any suggestions that would be great. I only need access to broadband very occassionaly and would like to avoid having to buy a new modem. Thanks
MacBook Mac OS X (10.4.6)

Generally usb modems don't work or don't work well on Macs
IMO, that is a bit of a sweeping statement. Most people in the UK use a USB modem, not least because they were supplied free by your ISP.
Get a modem with ethernet
Better still get a router, which what many UK ISPs now provide free.

Apple USB Modem Not Supported in Snow Leopard Running 64-bit Kernel Mode

Has anyone been able to get the Apple USB Modem to work with Snow Leopard (SL) when running SL in 64-bit kernel mode? I get an error saying hardware not supported.

I would suggest you take this question up in the MacBook Pro forum or perhaps the Snow Leopard forum. This forum is for question about older, Pre-G3 Apple hardware and so not the forum where you'll be most likely to get a quick and applicable response.
Regards.

After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS

After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS

Did you talk to your carrier?

Windows 7 (Ent) Sp1 on server 2012 R2 HyperV, RFX USB redirection not working

Hello,
I currently have windows server 2012 R2 with HyperV installed. I have built two virtual machines. A windows 8.1 and Windows 7 sp1. Both are enterprise editions
For RemoteFX the hypervisor is using a Zotec GTX 760 GPU. It recognizes it and uses it to apply remoteFX adapter on my Windows 7 Sp1 VM.
As you are aware I do not need to use a GPU to enable RFX on my Windows 8.1 it can do this without the need of a GPU.
Using an RDP client( v8.1) I can connect to my Windows 8.1 VM with a USB headset,memory Key or a printer and they all enumerate on the Virtual machine. The driver for each device installs
and I can use the device without any issues.
However this issue lies with the Windows 7 SP1 VM. I can connect to it via RDP( Same client) but I cannot redirect any devices to it. I have installed the latest integration services available on the VM. I have ran all updates available.
Because I have ran all updates the rdp version on the VM is running v8.1.
Previous to installing the updates USBr still was not working
I have enabled the following group polices under remote desktop services on the Windows 7 SP1 VM :
RDP 8.0 -- Enabled
Configure RFX -- Enabled
Is there a known issue with USB redirection not working on a Windows 7sp1 virtual machine hosted on server 2012 Hypervisor ??
Many Thanks
Brian

Hi,
According to the log above, I found that we run the script on both Server6 and Server7. Errors as below:
Server6: Conversion is not supported in restricted language mode or a Data section.
Server7: Couldn't figure out valid servers from the specified destination scope. Check your parameters and try again.
Since we can only run the RollAlternateserviceAccountPassword.ps1 Script on CAS server, the script not works well if Server6 is MBX server.
For Server7, based on the error message, it seems you still have no right to run the script/cmdlet.
Please add your account to Organization Management Role group(ADUC->domain.com->Microsoft Exchange Security Groups) to test if possible.
By the way, from Technet:
You need to be assigned permissions before you can perform this procedure. To see what permissions you need, see the "Client Access Security" entry in the Client Access Permissions topic.
Client Access Permissions
http://technet.microsoft.com/en-us/library/dd638131.aspx
Feel free to contact me if there is any problem.
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Air Stream 1200 USB modem not work in yosemite

Similar Messages

Maybe you are looking for