Air Tunes Help Needed

I just received my airport express and got the internet setup OK.
My main issue is getting I tune to play through my stereo.
I have a mini jack with RCA plug. I does not geive me a speaker choice on the bottom of my itunes.
Thanks

pft wrote:
I just purchased 2 Airport Express units for the
My question is: do I really have to Turn on Airport on the iMac to make this work? I would have thought that since the iMac is connected via ethernet to the Time Capsule that I can simply stream Airtunes that way to the remote systems but I cant seem to get it to work without turning on Airport on the iMac.
You do not need AirPort on to stream. My Airport is off. I have a similar setup with TC and Express. I suspect your Expresses are not set up properly. You may have created a new wireless network with the Expresses and are connecting to them directly via wireless.
Since you are already connect wirelessly, keep the Expresses where they are. Open AirPort Utility. You should see 3 devices. 1 TC and 2 Expresses. Access TC. Go Manual setup. Click Wireless. Setup your wireless network or write all the info down (name, password, encryption). Update if you've changed anything. Click on an Express. Manual setup. Click Wireless. Select Join existing wireless network. Enter the TC wireless network settings. Update. Confirm that Express shows up again on AirPort Utility. Repeat with Express #2. Via AirPort Utility, click Music -> Enable Airtunes. Enter a new password. Update again.
If all works, you should be able to turn off AirPort now.
Open iTunes. The bottom right will give you the option to broadcast to AirTunes. Enter password when prompted.
Good luck!

Similar Messages

  • Performance tunning -Help needed

    Hi ,
         I had one ZEE program which has 25 files as input file (input data's . Here the logic of the program is as mention below.
    1.initializition .
    2.get_file_names.(All 25 files name is get in the same perform )
    3.write_job_log.
    4.open_files.(Open 25 files at a time )
    5.read_surr_ctl_file.
    6.load_internal_tabs.( Load 25 files data to ITAB )
    7.create_edi214_tables.
    8.process_ekko_ekpo.(Proces the ITAB data at the time.)
    9.refresh_internal_tables.
    Here they are openning 25 files , then loading all 25 files to ITAB and processing all the loaded datas.
    When this progarm is schedule in background it takes 1.25 hrs to complete the process .
    I need to tune this program which ever possible way.   
    My thought and analysis in this program is -> This performance problem is due to like  openning 25 files , then loading all 25 files to ITAB and processing all the loaded datas which may hit the performance . Kindly let me know you IDEAS and experence on this issue . This program is having 10000 lines of code ..
    Regards,
    Veera

    SE30

  • I tunes help needed please

    hi guys
    i am using itunes on my macbook with an external drive
    i thought i was pushing the ecject key but i was pushing the key under it it i pushed it a few times then i remembered that it removes tracks from my i tunes
    has it deleted the mp3s ?? or will the tracks still be in my folder on my external
    also how will i get them back in to the player ?
    sometimes when i delete stuff it asks if i want to move the file to the trash it never time
    please help
    Marm uk

    Hello Nigel,
    I would be concerned too if I was not able to locate my music in iTunes.  I recommend reviewing the following articles to locate you music files on your computer:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/ts1408
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • AIR file extensiòn *.air - howto help needed

    Hola¡¡
    I have Adobe AIR (es nou)
    I have Adobe Media Player (es nou)
    I have Adobe Flex Builder (es nou .. 3.0)
    I have Adobe AIR project in Adobe Flex Builder
    It not run the Adobe AIR Program >>> Windows not
    can make AIR runtime and AIR fitxers.
    PERO>>> meu fitxer es totalment correctament ....
    i function in Flex Builder but not other.....
    Comes es that I can run the AIR programes The Adobe Media Player
    but Error comes with download AIR programes and comes I have Error.
    vale... the download AIR progames from web look diferent and have icones.
    but me programes not. Is no icona....is only file plus extensiòn air....per exemple "holamon.air"
    I installa the Adobe AIR other second time and problem comes also other second time...
    I not know this to work OK....perhaps I have Error Windows Vista?
    crec no tinc...pero possi....
    >>>>
    how to make associate the Adobe AIR fitxer and Adobe AIR runtime?
    No have opcións in Tauler de control ?
    You perhaps know ?
    Can you are help me please?
    sisplau,
    Moltes Gracies
    Dominik

    If I understand correctly, perhaps the air file extension is improperly mapped on your pc.
    In Windows Explorer perform the following:
    Tools --> Folder Options --> File Types
    Look for the AIR extension (see screenshot).
    Click advanced (see screenshot)
    Click "Edit"
    In the field labeled "Application used to perform action" mine has c:\PROGRA~1\COMMON~1\ADOBEA~1\Versions\1.0\ADOBEA~1.EXE "%1"
    Yours should be similar.  If you want to browse for the program, it's typically located in program files\common files\Adobe AIR\versions\1.0\Adobe AIR Application Installer.exe
    Good luck! My apologies if I've misunderstood.

  • "Call to method "setTextFormat" cannot be defined" in Air App (help needed)

    Hello,
    I'm following a tutorial to begin with ActionScript 3 and Adobe Flash. I'm willing to create an Air app, but I stumbled upon an issue. The tutorial is for Flash Player, so I wonder if it also work for Air apps (sorry, I don't quite grasp the differences yet).
    So here is a screenshot of the issue :
    The error reads : Call to method "setTextFormat" cannot be defined, via reference of type static fl.controls:TextArea
    (sorry if it's badly translated :/)
    What I have below is a TextArea (taken from the User Interface Components) and a button (same). I noted their instance name that you can find back in the AS block.
    So since it's the exact same code as in the tutorial (in which it work), why do I get this error ? I tried lot of things to get rid of it, but I'm out of options now, so I ask you for help.
    Regards.

    Thank you very much for you answer Ned. It's clearer now. I just would like to create the textField WYSIWYGly, but I can't find it inside the component Library. Only TextArea's and TextInput's are there. Do you have any idea where I could find this component to add it visually to my project ? Or must I create it with AS?
    I use Flash CS5.5 by the way.
    EDIT: striked out non relevant portion. I finally found out. Sorry it's been a while, but it was so obvious ^^

  • Ipod crashing and not able to display in i-tunes - help needed please

    After synch, i-tunes said disconnect but ipod still flashing not too and continued so had to disconnect after bout an hour! Now ipod not recognised in itunes. Have run ipod diagnostic check from i-tunes and everything on green saying it connected properly!
    tested i-tunes with shuffle and that all works fine.
    Been trying to resolve for hours!

    Have you reset the iPod? In the future you can use
    the "Safely Remove Hardware" icon in the system tray
    to eject your iPod. It looks like a silver rectangle
    with a green arrow over it.
    I've reset it using the menu button and the click wheel - is that what you mean or is there another way?

  • HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help

    HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help.
    I bought it in South Africa and I am currently in Israel.

    thank you for the response.its not working, tried that. i can switch the machine on and off, can hear the machine when i hold it to my ear. but nothing works, not the screen, not the sound, nothing.

  • HELP NEEDED!! Recently upgraded my ipad air to the new update, charged it over night, now it will not come on? i plug in the charger but comes up the normal charging sign but still no life in it?

    HELP NEEDED!! Recently upgraded my ipad air to the new update, charged it over night, now it will not come on? i plug in the charger but comes up the normal charging sign but still no life in it? Seems as though theres either a problem it charging or starting up. Had the ipad for about a year and a month or 2.. what can i do to source the problem?

    Its just started up with the apple sign, then it goes to an off black coloured screen so its on but nothing showing just a dark screen but not jet black.. ahhh help!! thank you in advance

  • HT3910 I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings.  I've been reading the help but I don't seem to have a re-install drive for the USB port.  Is this something post 2008 or can I get one from somewhere?

    I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings.  I've been reading the help but I don't seem to have a re-install drive for the USB port.  Is this something post 2008 or can I get one from somewhere?

    Hey Stella,
    Welcome to Apple Support Communities, and thanks for the question! I'd read through the following article before selling your Mac - it'll include instructions on how to reformat your hard drive:
    What to do before selling or giving away your Mac
    http://support.apple.com/kb/HT5189
    All the best,
    David

  • Update Macbook Air from 10.5.8 - Help needed!

    I got an iphone 5, and I need to update my itunes but the new itunes is not compatible with my macbook air, the version is 10.5.8, how do I update my macbook air?

    You need a Mac OS X 10.6 DVD and an external optical drive.
    (73666)

  • Multiple problems - help needed please

    I've got so many problems that I've completely confused myself. So, if anyone can help….
    I was previously using a D-Link D-320T DSL modem on BT Broadband in the UK. The modem was set up in bridge mode, and hooked up via ethernet to my Airport Extreme (n). The AEBS would use PPPoE and successfully connected to the internet, as well as handling all my network needs.
    Everything worked and everything was fine, allowing screen sharing and file sharing between my Mac Mini, MacBook and MacBook Pro.
    Earlier this week, the internet connection dropped and I couldn't find the cause. Resetting the router and hooking it up directly to my Mac Mini, I connected to it (192.168.1.1) and had it connect to the internet itself.
    It did so, and distributed IP addresses to the Mac Mini…but after 30 seconds my internet connection dropped, and looking in network preferences, I found that the modem had jumped from a router address of 192.168.1.1, to an 82.xx.xx.xx address, which was clearly the public IP address forwarded by my ISP. So it seemed like it was working in a sort of bridge mode still.
    I reset the router numerous times, tried switching it into full bridge mode etc, but the AEBS was unable to use it to connect via PPPoE as before, because the D-Link would play nice for 30 seconds, then jump around with addresses.
    Very strange, but I assumed the modem was just broken.
    I dug out my spare router, being the Netgear DG632.
    I managed to get this hooked up to the internet really quickly, and using an ethernet connection to the Mac Mini, it all appeared fine. However, as I started looking around the internet, I noticed that although google.com would open up, any subsequent links, and indeed any other domains I tried to visit would not open.
    Resetting the router seemed to solve this.
    I then hooked up my AEBS to the Netgear and, after pondering which way to use it, I found the only way I could get it to play nice was to have the AEBS in bridge mode itself, meaning that the Netgear would do all the routing work.
    The MacBook connected to the airport, and all seemed okay….
    …However, I then noticed that the internet connection would randomly drop. Web pages would not open (in any browser), and downloads which were under way could be seen in the Safari download manager to suddenly crash.
    The same was true on the Mac Mini - web browsing stopped at random. I had however hooked this up to the airport via an ethernet cable, I noticed that, although the "internet" wasn't working, other connections like torrents were still active.
    Reconnecting the Netgear router directly to the Mac Mini allowed me to see in its diagnostics that it still held a connection to the ISP and still had an external IP address.
    Again, a reset of the router seemed to resolve things….but only for a few hours. And whilst the Mac Mini seemed resilient, the airport connection to the MacBook was terrible. (I haven't even tried using the MBP yet).
    Furthermore, I noticed that networking between devices had severely been crippled. Although the Mac Mini and MacBook were visible to each other in the shared devices section of finder, clicking the link meant waiting literally four minutes for a connection to establish, and screen sharing timed out, from either direction.
    I then tried assigning everything static IP addresses, but this seemed to confuse matters with the router.
    Under the impression that the Netgear clearly couldn't handle the job of routing my network, I tried to set it up in bridge mode and use the AEBS as before.
    Reading around the internet (on my iPhone at this stage), I realised there was no obvious "bridge mode" option, but I was told to set the device mode as router, and then say "no" when it asks if there are any login details for the ISP (under Basic Router Settings). This was done.
    However, setting up the AEBS with PPPoE had no success, and the connection was never made.
    At this stage, I'm living with a crippled network and two routers, neither of which do what I want.
    Can anybody advise me on a solution to fix either router/modem?
    I want to use the modem in bridge mode and have the AEBS handle everything as before, as it was perfect.
    At this stage, which a frazzled brain (after messing with everything for several hours), something step-by-step would be great.
    Help! (and thanks)

    I have also recently developed problems with my airport network. I was playing my air tunes when it started freezing so i reset my airport extreme and expresses. When I tried to setup my networks again I en counted problems like airport utility couldn't find the extreme base station or when it did it couldn't read the setting. I eventually managed to create a network then when i tried to connect to the network it either asks for the password (even though its saved in keychain) When I enter the password it keeps saying "connection time out". I then turn airpot off & on and it the sometimes reconnects automatically without requiring a password.
    My internet then will sometime start working again but then drop out completely or take an age to load.
    The network will then sometimes disappear from the network list and I'm unable to see it at all.
    No matter how many time i reset the base station it doesn't make a difference.
    I my broadband modem is also a wireless router and Im experiencing similar problems with that. I took my laptop to work and tried to connect to the network at work and it seems to work ok except it did ask for a password the time out but did it only once.
    I did download a security update recently but im not sure if its that that is causing it
    please help me as well as I'm stuck without my network

  • Help needed to optimize the query

    Help needed to optimize the query:
    The requirement is to select the record with max eff_date from HIST_TBL and that max eff_date should be > = '01-Jan-2007'.
    This is having high cost and taking around 15mins to execute.
    Can anyone help to fine-tune this??
       SELECT c.H_SEC,
                    c.S_PAID,
                    c.H_PAID,
                    table_c.EFF_DATE
       FROM    MTCH_TBL c
                    LEFT OUTER JOIN
                       (SELECT b.SEC_ALIAS,
                               b.EFF_DATE,
                               b.INSTANCE
                          FROM HIST_TBL b
                         WHERE b.EFF_DATE =
                                  (SELECT MAX (b2.EFF_DATE)
                                     FROM HIST_TBL b2
                                    WHERE b.SEC_ALIAS = b2.SEC_ALIAS
                                          AND b.INSTANCE =
                                                 b2.INSTANCE
                                          AND b2.EFF_DATE >= '01-Jan-2007')
                               OR b.EFF_DATE IS NULL) table_c
                    ON  table_c.SEC_ALIAS=c.H_SEC
                       AND table_c.INSTANCE = 100;

    To start with, I would avoid scanning HIST_TBL twice.
    Try this
    select c.h_sec
         , c.s_paid
         , c.h_paid
         , table_c.eff_date
      from mtch_tbl c
      left
      join (
              select sec_alias
                   , eff_date
                   , instance
                from (
                        select sec_alias
                             , eff_date
                             , instance
                             , max(eff_date) over(partition by sec_alias, instance) max_eff_date
                          from hist_tbl b
                         where eff_date >= to_date('01-jan-2007', 'dd-mon-yyyy')
                            or eff_date is null
               where eff_date = max_eff_date
                  or eff_date is null
           ) table_c
        on table_c.sec_alias = c.h_sec
       and table_c.instance  = 100;

  • Help needed by new Iphone 4s owner

    Help needed please - both my hubby and I have iphone 4s - I've just gone to download music onto my phone and have somehow managed to download all his stuff onto my phone and lost all of mine Is there anyway I can get my info back and delete his without restoring to back to factory settings (this was the first time I connected mine to the laptop to download and I'm not very good with the computer as you can see from my problem !) xx

    Thank you but I've not managed to download any I tunes yet but have got all his contacts and none of mine - thats what I'm trying to restore (sorry if not clear in question but as I said before I'm useless on computers)

  • Help needed with itunes

    help needed with itunes please tryed to move my itunes libary to my external hard drive itunes move ok and runs fin but i have none of my music or apps or anything all my stuff is in the itunes folder on my external hard drive but there is nothing on ituns how do i get it back help,please

    (Make sure the Music (top left) library is selected before beginning this.)
    If you have bad song links in your library, hilite them and hit the delete button. Then locate the folder(s) where your music is located and drag and drop into the large library window in iTunes ( where your tracks show up). This will force the tunes into iTunes. Before you start, check your preferences in iTunes specifically under the"Advanced" tab, general settings. I prefer that the 1st 2 boxes are unchecked. (Keep iTunes Music folder organized & Copy files to iTunes Music folder when adding to library). They are designed to let iTunes manage your library. I prefer to manage it myself. Suit yourself. If there is a way for iTunes to restore broken links other than locating one song at a time I haven't found it yet. (I wish Apple would fix this, as I have used that feature in other apps.) This is the way I do it and I have approx. 25,000 songs and podcasts and videos at present. Hope this helps.

  • HT3503 i have a macbook air and I need to connect my firewire device to it. Where can I find the correct adapter?

    I am trying to connect my presonus firebox that uses firewire to my new macbook air, but I need an adapter. If anybody knows of one please help.

    @Christoph: Um, no there aren't. The only thing I know of is the Belkin TB hub, which is $300 & way more complicated (& bigger) than just an adaptor.
    http://www.hardwarezone.com/tech-news-belkins-new-thunderbolt-express-dock-revea led-ces-unveiled-2012
    If anyone knows of something with TB in and simply one or two FW ports out, that would be extremely useful for this audio guy.
    ~peter in oakland

Maybe you are looking for

  • Logic 7.2 files won't open in logic 8

    Logic pro 8 works fine when open. Have recorded several songs with it, However when I attempt to most of my Logic 7.2 files, it crashes over and over gain. It seems to search for and load files, but will not open after it does. Any help is greatly ap

  • Can't zoom in and out in camera mode on blackberry curve 8520

    Hi IM Carlos and im new to this phone and I had a couple weeks now and I used the camera on my phone and was able to zoom in and out before but now it wont let me zoom in and out and I tried the shortcuts that it came with but nothing works can anyon

  • I'm trying to erase everything but it's been loading all day. Help pls

    Hi, I'm trying to erase everything from my iPhone so I can sell it and I selected the erase and everything (I know I sound very technical) and after clicking confirm the black screen with the white spinning circle came on. I left it for a couple of h

  • WLS Groups and JDeveloper Enterprise Roles

    When there are roles (global, domain, etc.) in the WLS Console, they seem to not have any representation in JDeveloper. It seems that JDeveloper Enterprise Roles correspond to WLS Groups. When I add permissions in the jazn-data.xml, it is Groups that

  • How to handle UI elements property

    hi, all this is very common problum which every one face. The problum is that how one can handle UI elements(Radio,Label,Input field ) property dynamically.