Air Tunes not working after "8" install.

I have installed iTunes 8 successfully. Everything works great except my ever dependable Air Tunes / Airport EXpress hook-up now does not work. Some Unknown error. I have re-installed iTunes and reconfigured AirPort Express. Nothing. Can someone help? Jerry H

From MacFixIt:
+iTunes no longer streams to airtunes devices, giving 'unknown error' -15000 or -3256 Many users are experiencing problems with iTunes 8 streaming music to devices that are connected using "Airtunes". The feature does not work, and users get either error -15000 or error -3256 which iTunes claims are "unknown errors". Error -15000 can be caused if users have old firmware on their Airport Express devices that are being used for Airtunes, so users should check the firmware on the device to ensure it is updated to the latest (version 6.3). Error -3256 may be caused by firewall interference with the Airtunes connection, and users should ensure that iTunes is listed in the system firewall (System Preferences --> Security --> Firewall) and is given "Allow" permissions for network connections.+

Similar Messages

Flash player does not work after I installed it

Flash player does not work after I installed it

I'm using Mac Osx and my browser is Safari
Date: Wed, 5 Feb 2014 00:41:29 -0800
From: [email protected]
To: [email protected]
Subject: Flash player does not work after I installed
    Re: Flash player does not work after I installed it
    created by Mike M in Installing Flash Player - View the full discussion
This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
What OS are you using?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

My printers are not working after mavericks install.
The printer just PAUSE and can't be resumed.
What can I do to fix - PLEASE HELP!
It is my lifeline - we are a print shop!

Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
Then open System Preferences > Printers & Scanners > Print
Select your printer on the left then click - (minus)
Then click + (plus) to add the printer.

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

IMessage not working after IOS7 install?

iMessage not working after IOS7 install?

Yep, it has issues. Word is that Apple is working on an update to fix it but no idea when it'll be rolled out.

TS1702 Certain apps will not work after ios6 install.

Certain apps will not work after ios6 update. Tiger Woods golf will run for about 5 seconds and stop. Have uninstalled/re-installed to no avail.

My husband had the same problem with some apps after I updated his iPad 2 to iOS 5. I checked the app store and there were updates for the apps to support the new software. After updating, all apps work just fine.

Adobe reader not working after cs5 install

adobe reader not working after cs5 install

Nobody can tell you anything without proper system info or other technical details like exact version info.
Mylenium

T mobile broadband stick not working after lion instal

T mobile broadband USB stick not working after lion install

No s#!t batman.The point is a mac laptop is ment to be mobile and for it to be mobile you need a mobile broadband stick so when a new op system lion is released don't you think it would be one of the first items to be checked for compatability.with snow leopard the same problem took months before I could use a broadband stick,there is no lion connection manager software available right now until someone decides to wright it, so does anyone have a usefull fix i can use ?

Mail search not working after clean install of 10.5.4 on new 20" iMac

Apple Mail search is not working. Search on "subject line" works, but search on "entire message" does not. For example, searching with "parking" yields NO results, and there are many messages with the word "parking" in their body in the mailboxes. It happens with both "In Box" and "All Mailboxes" checked.
What's going on?
I did a clean install of Mac OS X on a 20" iMac using the Install disk shipped with the machine. Then I ran Software Update. Still, the problem happens, on a clean baseline system.
Argh.

I've had this problem since Tiger. Various solutions have been posted, but none have worked for me. It really cripples Mail--I've used emails as my personal database for years, kind of a history log, which worked great in Eudora but Eudora isn't being supported anymore.
After updating to X.5.5, I can search "entire message" for "All Mailboxes" and find everything including emails in the mailbox I was viewing (often finds 60,000 occurences, but doesn't take very long--it's just incredibly tedious to find the one I want from such an enormous set of results). I can also find everything using Spotlight, outside of Mail. But if I am looking at any mailbox, like Inbox, search "entire message" never finds anything at all. Searching for subjects etc works fine.

Time Machine not working after Lion install

After Lion install at first Time Machine would not back up-then it did, but backed up the entire HD-now Time Machine will no longer function in trying to retrieve any data from Mail or anything else

After consulting with maker of back up drive (LaCie) I opted to format the drive. Lost some stuff but nothing critical. I then backed up and now all appears to be working, i.e drive is backing up and Time Machine is now functioning.

File sharing not working after mavericks install

I have upgraded both my MB Air and my Mini to Mavericks and have discovered that sharing between the two over my wi-fi network is not working. I cannot share the printer from my mini to the Air, and when I try to "connect to server" under the "go" menu in finder, it says, "there was a problem connecting to the server "mini.local".
Any help?

Hi Bryan_Jay,
Any resolution to this issue? I have the exact same setup. A 2013 MB Air on a Time Capsule network with a 2013 Mac Mini. The strange thing is that sharing worked fine after the Mavericks upgrade for about 2 weeks; after that point I cannot connect to shared folders on the Mini from the MacBook, but am able to connect from the Mini to the MacBook. On an interesting note, I am able to connect to the Mini from the MacBook using Screen Sharing. I'm wondering if a system update might have caused the problem.
Hope you're up and running!
- Chris

Canon MP 600 Printer not working after Leopard Install

I installed the Leopard OS and now my Canon MP 600 printer that purchased at the MAC store with my Mac in Aug of this year. It was working properly prior to the Leopard install. I tried re-installing the printer drivers, but no change. I can see my MP 600 as the only printer available. I am also unable to even print a 'test' page. When I run the Network Diagnostics everything is fine, but no printing.
Any suggestions?

I tried this. I also tried updating the CUPS config file as was noted elsewhere. The printer is a total no-show on Leopard.
It is being served by an older G4 whose only job is to serve the printer.
On Tiger it would just *be there* to print to. All the Panther computers see it as a "shared printer" in the printer box.
In Leopard.... not a &^^&% thing.
Not happy.
deviztate wrote:
Are you using a gimp driver? I had the same issue and gimp was the cause. I went to the Canon website and found the driver I needed. After the install and restart all was well. In fact, when I opened Print Utility, I saw that the system had already defaulted to the new Canon driver. Here's the Canon link...
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=182&mo delid=12892
Navigate to drivers and downloads... Hope this helps...
-d

ISight Camera not working after Leopard install

On my 1st gen Intel 20" iMac, after the Leopard upgrade -- which went very smoothly -- my iSight camera no longer works. I have tried it in Photo Booth and iChat Video and it is the same in each, so it is the camera, apparently, not the application using it.
In the self-viewing screen on my iMac, I see myself for just a second or so, then I fade out quickly and there is nothing to see but black. If I shine a desk lamp in my face, then I can just barely see the outline of my image but the picture is mostly black. It seems like an exposure problem: the camera seems to adjust, shutting down as though I am very brightly lit but since I am not, it produces only a black picture.
I also have a 1st gen Intel white MacBook that I have also upgraded to Leopard. The iSight camera seems to work just fine on that computer. I tried out the video in Photo Booth and it worked great.
Any ideas?

Hi,
I too am having the same problem, and I'm using the old school iSight camera and immediately after installing Leopard, it won't work. I can't even power up the camera. It will power up for about 3 seconds then power down as fast as the little green light came on. It was fine about an hour before the 10.5 install. I powered down and unplugged everything for about 10 mins. then plugged it all back in, and still not working. So I am back to the drawing board trying to sort this out. If anyone has anymore thoughts on this, pls. chime in. All the suggestions seem to work for you folks after a little tweak. I even booted into OF mode and reset-nvram and reset-all for kicks to give it an even fresher start.
thanks!

External iSight Camera not working after update installed?

a couple of weeks ago I turned on iChat and up popped a window that said i needed to update the (external) iSight camera i had plugged into my minimac (firewire). followed the instructions and did just that. little greenlight glowed happily, rotated lens and opened iChat--little green light blinked off and then iChat showed that the camera was not turned on. tried turning it on and off by rotating the lens, unplugging firewire and also restarted computer...no change. looked for update to firmware and downloaded 1.0.3, only to be told it does not work with OS 10.4 (bummer).
had a back up camera, plugged that in and no problems...trouble is roomate recently got the pop-up screen when he was using it and, thinking he was doing me a favor, 'updated'...so now have 2 cameras that do not work and no answers to be found on the posts or the apple support site.
any ideas?

Welcome to Discussions, johnboysf
(1) Assuming you are not ANY having other problems with your Macs and that your Mac OS X Maintenance is up to date, you can concentrate on the iSight part of your system(s).
Restart your Mac with no unnecessary peripherals connected and try the suggestions here:
http://docs.info.apple.com/article.html?artnum=93240
(2) If your iSight still does not work with any app, check for Possible hardware or software conflicts with iSight.
(3) I cannot tell whether your mini is an iNtel or PPC. Apply the appropriate Combo Updater as follows if you still have the problem:
• Backup your Home Folder, or at very least, your important files.
• Repair permissions. (Click here if you need help.)
• For PPC, download and apply the Mac OS X 10.4.10 Combo Update (PPC).
• For iNtel, download and apply the Mac OS X 10.4.10 Combo Update v1.1 (Intel).
• Finish with another Permissions Repair, and then check your iSight again.
Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
(4) If your problem persists after trying all of the above, the problem may be with your iSight itself. The fact that you got that notification after you had previously been using your iSight successfully under OS 10.4.x, and the fact that the updater ran for you and your roommate under OS 10.4.x, makes me think there may be something wrong with your iSights. The Tiger (10.4.x) OS includes all the necessary earlier update (including iSight Firmware 1.0.3) and installs the Firmware update if necessary at the time you installed Tiger or first connected your iSight. Therefore, the Firmware update should be unnecessary and should not have been identified by Software Update... as being needed (unless someone has improperly thrown away some OS X files.)
As you note, iSight Firmware 1.0.3 will not run except on Mac OS X v10.3.7-10.3.9 (or, it now seems, if something is wrong.) If you have access to a Firewire-equipped Mac that is using one of these OSs, you can try applying the update to your iSights using that Mac.
(5) If you cannot find a Mac that is still using Panther, or if applying the update does not resolve your problem, contact your Apple Authorized Service Provider for professional service. Ask your AASP if he wants to see your Macs, too, to check whether their software has been modified or damaged.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.10) G5 DP 1.8 w/Mac OS X (10.5) External iSight

Spotlight not working after fresh install of Mac OS X

Hi,
I have erased and installed the Mac OS X on my powerbook and spotlight is not working. I have tried almost all the solutions provided on the forum.
I have tried adding the root drive to the privacy section of the spotlight preferences but it doesn't list the drive at all.
I have tried using spotless, Yasu, Cache out X, deleted the spotlight.plist file
Nothing works! It should be working after a fresh install. My computer just came back after a hard drive replacement and the spotlight wasn't working even then. I thought a fresh install of the OS would help, but can't get it to work.
Can anynody suggest anything? Your help would be highly appreciated.
Thanks,
Aditya

Hi Tom,
Thanks for the reply and the link.
I re-installed the OS again! This time using the UNIX file system setting during installation. Then when I booted my computer, Spotlight worked like a dream. But then I connected my external firewire hard disk and it stopped working!
Is there a work around for this, can I get spotlight to work again?
Thanks,
Aditya

Air Tunes not working after "8" install.

Similar Messages

Maybe you are looking for