Air video doesn't connect remotely

When I leave my home and my wireless my ipad doesn't recognize my computer to stream my videos. Does anyone know how to program the air video to do that?

Does your school allow Video chats ?
Do they have the ports iChat needs Open ?
Do they allow Off Site chats ?
Have you done the QUicktime Streaming setting in System Preferences > Quicktime ?
(Set it to 1.5Mbps and restart iChat)
IS there enough Bandwidth ?
The Connection speed maybe fast enough but your share of it (Bandwidth) may be a lot slower/lower than you think.
10:47 PM Thursday; October 18, 2007

Similar Messages

Macbook Air Doesn't Connect To Wifi Upon Waking

Since installing Yosemite, whenever I wake my Macbook Air from sleep, it doesn't connect to Wifi. In order to get it to work, I have to open up Network Preferences/Assist me/Diagnostics and go through that process (then it works). Any suggestions on how to fix this?

Hey there alhs77st,
If you are still having this issue where your computer is not connecting to your Wi-Fi network when you wake it from sleep, I would use the following article to help resolve that. This section in particular:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
Thank you for using Apple Support Communities.
All the very best,
Sterling

Macbook air doesn't connect to Sharp Notevision PG-B10S projector

macbook air doesn't connect to Sharp Notevision PG-B10S projector with OS X, same as upgraded to Yosemite

Hi There,
Whenever I hook up a projector that doesn't work with my MacBook (when it shows just a blank, black screen), the first thing I try is going to System Preferences > Displays and setting the resolution of my desktop to 800x600.
Nine times out of ten, the projector starts right up and works perfectly.

When I connect my ipod to my mac air it doesn't seem to recognize it- it doesn't show up on the screen. What can I do ?

When I connect my ipod to my mac air it doesn't seem to recognize it- it doesn't show up on the screen. What can I do ?

Try using RecBoot to kick it out of recovery mode. If that does not work, try a manual install, as outlined in link below. If it STILL keeps entering recovery mode, you most likely need a new logic board.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

After upgrade to yosemite my macbook air doesn't connect to iPhone 4s(version8.1).

after upgrade to yosemite my macbook air doesn't connect to iPhone 4s(version8.1) .it did connect once and thats it...theywork now as two different mac products as before upgrade. that advantage of connecting the mac products after upgrading to yosemite has not worked.

Hi netaanya,
Welcome to the Apple Support Communities!
Your iPhone 4s does work with Continuity, but only phone calls. Please refer to the attached article for more information.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
Handoff is supported by the following iOS devices and requires iOS 8. Instant Hotspot requires one of these iPhone or iPad devices with cellular connectivity and iOS 8.1. Instant Hotspot also requires Personal Hotspot service through your carrier.
Phone 5 or later
iPhone 4s (sharing iPhone calls only)
iPad (4th generation), iPad Air, iPad Air 2
iPad mini, iPad mini with Retina display, iPad mini 3
iPod touch (5th generation)
Cheers,
Joe

Suddenly, thunderbird doesn't connect to remote server when i click "get messages".

Linux (ubuntu studio), 64 bit. Suddenly, thunderbird doesn't connect to remote server when i click "get messages". It just says "(account name): Connected to (mail server)" for a second or two at the bottom, then nothing. In the server logs, i get:
popa3d[6408]: Didn't attempt authentication
Trying to get my e-mail also seems to cause a bunch of these errors on the server:
(server) kernel: [18295.775491] lockd: cannot monitor laptop
where "laptop" is the client machine.
The problem seems to be caused by my mailbox files (Inbox and Inbox.msf) - when i create a clean ~/.thunderbird directory, i can get my e-mails, but when i place my mailbox files in this account's Mail directory, the problem comes back. Even if i place it as another name, and not Inbox.

I should add the following information:
- Neither "safe mode" or rebuilding the global-messages-db.sqlite file fixes the problem.
- Seamonkey has no problems with my Inbox and Inbox.msf file.
- The Inbox and Inbox.msf files are symlinks to files on a NFS filesystem.
- Downgrading to an earlier version of thunderbird doesn't fix the problem.
- Even if i remove the mail file from an account, the problem persists.
- I confirmed that i can telnet to the server on the pop3 port and login with the raw protocol.
The above mentioned lockd errors make me think this is a NFS related error, but if that's the case, why is seamonkey able to read my Inbox file without problems but not thunderbird?

IPad no longer connects remotely to my iMac

I got Splashetop Remote Desktop for the iPad the other day and it worked great for a few minutes but then it simply stopped working. It would no longer connect to my iMac remotely. But the worst part of it is now none of the remote apps on my iPad are working either. I'm talking about apps like Air Video, Remote HD, Rowmote, and Mobile Mouse. None of these apps will connect to my Mac anymore when they worked perfectly before. Same goes for the Apple Remote App with home sharing turned on. Interestingly, the same apps still all work perfectly on my iPod Touch (minus Splashtop Remote Desktop) which I don't have for the iPod Touch).
Clearly Splashstop Remote did something to the connection between the iMac and the iPad because everything was working before I tried it for the first time.
I've erased Splashetop Remote from the iPad and uninstalled its server application from the iMac. I even did a full reset of the iPad followed by a restore from a few days ago. Still nothing. Wifi on the iPad has been working fine the entire time as I can surf the web, check email, Twitter, etc... So it's just remote access apps tat won't work anymore even though essentially the same apps on my iPod Touch still do work. Firewall is off and I don't use antivirus software.
It might help to add that all the remote apps on the iPad keep timing out. Also, occasionally Rowmote quickly flashes some sort of "GFL Socker Error" message. It flashes so fast it's impossible to read it so the first part may be wrong. I definitely saw the words Socket and Error though. It's really the only thing I have to go on.
I've also repaired permissions on my iMac.
I would really appreciate it if anybody could provide any help. I've already worked on this issue for a few days and so far the developers of Splashtop Remote hace been no help. I don't know if this is an IOS or OSX issue or both?
-PN

Since you purchased a copy of Remote HD, send us an email at [email protected]
We will assist you in getting your iPad back online again.

Trying to get my air video app and my airport extreme router to work.

Hi there. I am getting really frustrated and desperate. I just purchased the app "air video" on my iPad. Installed the software on my mac. Works awesome when I'm on MY WIRELESS NETWORK. I didn't think it would be an issue once I left the house and tried to go on someone else's network to connect, but it just won't work. It keeps giving me the error "host not reachable". I tried opening up the air video troubleshooting info and tried everything but nothing seems to work. I tried under the "remote" tab in the air video server preferences. I clicked both "enable access from Internet" and the "auto map port" options. In the box below I just see the word status and the spinning wheel along with "looking for UPnP or NAT-PMP compatible devices" but the wheel has been spinning for about 15 mins. It doesnt appear to be finding anything.
I've also clicked off the "auto map port" to see if that would do anything. I got the pin and tried that. Still nothing. I tried to look for some information on port forwarding for my airport extreme but everything I'm googleing seems to be years out of date.
I am currently on Mac snow leopard 10.6.3 I believe. Everything is latest version. Using comcast modem with apple airport extreme router. Latest version of Air video app and software. On iOS 4.3.1.
Anyone that can try to help me out, I would be eternally grateful.
Thank you so much
Keith

* need to edit to" trying to get my iPhone not iPhoto**"

HTML/Javascript positioning air.Video object

Hi all,
Simple question which has been doing my head in all weekend!
I have got a simple application that programmatically creates an Air Video object and attaches it to a camera as per
this.video = new air.Video( 320, 240 );
this.video.attachCamera( air.Camera.getCamera() );
I then want to embed that Video object into a specific location on the page (in the DOM). If I use the stage and addChild it just plonks it over the top of anything that's there already. Doing getElementById('container').innerHTML = this.video or similar does not work.
I very much think I am missing something fundamental here but no amount of googling seems to be able to find similar examples to what I am trying to do. All the examples I can find use statically defined HTML<object> tags with fixed urls.
Any suggestions would be much appreciated.
Phil

Check the Security.sandboxType value in the embedded SWF. It should be "localTrusted", in which case you should be able to access both local and remote resources.
There is a bug in AIR in resolving relative file paths in this scenario, that you might be running into. What happens is that Flash Player asks its container to resolve a relative file path. Normally, the container is a browser and returns the resolved path using a common URL scheme that Flash Player understands. However, AIR regards the SWF as being in the application sandbox and returns the resolved path with the app: URL scheme. Flash Player (which is acting just like the plug-in even in an AIR app), doesn't understand the app: scheme, so it doesn't know how to find the file. A workaround is to use absolute paths, which would probably require your JavaScript code to pass the absolute base path to the video player.
As to positioning the Video player, this would require creating a div (or other page element) of the same size as the video and tracking the position of this element on the page. Whenever the position changes, you move the video on the stage (by resetting the video x and y properties). I don't know how much lag in positioning you would run into when the user scrolls the page, especially if the video was playing...
A third option, of course, is to rethink the UI so that you have separate display areas for the HTML and the video.

TS5148 When I try to play a movie on Netflix from my IPad, I get a pop up saying: Cannot play video. "The connected display is not supported".

When I try to play a movie on Netflix from my IPad, I get a pop up saying: Cannot play video. "The connected display is not supported". I have updated my Apple TV, tried restarting it, and have tried using my IPod Touch all without any luck. This display has worked in the past. This just happen a couple days ago.
Any ideas out there?

I have been successfully using my Apple TV with my iPad2 to access Netflix through airplay (mirroring) and suddenly it won't work. It says "the connected display is not supported" What's up?
Also when I try to stream Netflix through my Apple TV menu on my television it says "An error occurred loading this content. Try again later. But trying again later doesn't work any better.
Now the only way I can watch Netflix is using my small iPad screen. It appears the problem is with streaming Netflix through my Apple TV

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
You said:
No, I do not want to "factory reset" my iPod. No I do not wish to do anything crazy long or hard to fix this.
That may be necessary, It is not what you want to do/not do but what is required to resolve your problem.

Can't find air video in system tray on my pc. Recently updated op system from xp to win7. already reinstalled itunes and synced ipad.

Can't find air video in system tray on my pc. Recently updated op system from xp to win7. already reinstalled itunes and synced ipad.

Carol L wrote:
Hi Deggie....I did figure that out since I posted the original question, and I downloaded ther server again and tried it out, but it can't connect. Any ideas?
-> http://www.inmethod.com/airvideo/troubleshooting.html
-> http://inmethod.freshdesk.com/support/solutions

IOS Firmware 4.0 breaks Air Video TV Out support.

All is explained in the title!
I used to watch videos from iPhone applications on my TV (by using the official APPLE cable for my IPhone 3GS) and now, all these kind of applications don't work with the upgrade iOS4.0 !!!!
Example of the main applications I use:
Air Video
Share Player
That's very bad news. Air Video has become one of the main programs I use on my Iphone 3GS.
it is nonsense to suggest the AppStore applications that can not do what the description says.
Will Apple allow it to use the TV out to third-party applications with the iOS 4.0?
Otherwise, will Apple reimburse users who purchased these kind of applications?
How will Apple respond to complaints from its customers?
I've always been a great fan of Apple products but now I think Apple is not fair with its customers and developers. I hope this feature will be fixed soon!
Message was edited by: AppleIdea

Same to me here. Would like to have this issue fixed since i spent lots of money buying the dock and the original cables. Won't there be any possible solution for developers to use the TV out? It even doesn't work anymore out of Safari watching a live stream. I am very annoyed by that!

ATV and Air Video Streaming stopped working

I have been using AIR VIDEO (Standard and HD Version) for months now flawlessly, no issues at all, until the other day any of my devices (iPhones and iPads) will only stream to my ATV's for a few seconds then they cut off and jump back to home screen and the contact starts playing on the device again.
All my devices can see the ATV's no problems there
I am using Air Video Server on a Mavericks iMac and i have iP5, and iP1 (Original), iPad Mini, and also iPad Air - all same problem occurring.
I use the Air Video APP On any of those devices and the same problem occurs.
I've tried so far:
Uninstall AV Server and the APPS on the Devices
Reset and Restart the ATV's (i have ATV2 and ATV3 by the way)
Anyone having the same issues?
Could this be Firmware on the ATVs have updated and not allowing this now?
Can i restore the ATV' back to an older Firmware?
They both currently say they are up to date and running the latest software,
Any help much appreciated....
James

could also be network problems
I would try connecting a mac and the appletv by enthernet cable to the router and if it dont have any problems then I would know it was the wifi which was getting interference from another wifi network or other things which operate on the same frequencies (2.4Ghz which is used for wifi apart from 5Ghz is a very very very busy frequency)

Air video doesn't connect remotely

Similar Messages

Maybe you are looking for