Air wont run after installation

I am using Vista. I downloaded air and then installed it from the adobe site with no probelms, but everytime i go to open it, it says something like the installation was corrupted. so i tried uninstalling then installing again and even just reinstalling, but i still get this error when i go to run it. Please help me.

help please?

Similar Messages

  • Photoshop cs 4 wont run after installation on mac book pro

    I recently brought the adobe design premium package with flash, illustrator, indesign, photoshop etc...
    after installation all other application works but just photoshop, it just wont start at all...
    it will pop up on the deck for a second or two and just disappear. the progra wont run at all. other applications like illustrator, indesign etc... all work just fine but just not photoshop... i dont get it what's wrong. no error or anything. just pop up and then disappear.
    the spec of my macbook pro
    mac osx 10.6.2
    2.53 ghz intel core 2 duo
    4 gb 1067 mhz ddr3

    So have you done the basics?
    Toss the PS folder and run the installer again?
    Run the updater from an app you can open? (this will update all)
    etc...

  • ITunes wont run after update today says missing file msvcr80.dll

    iTunes wont run after update today says missing file msvcr80.dll
    tried to reinstall, nothing changed.

    Check out the user tip below.
    https://discussions.apple.com/docs/DOC-6562

  • My MacBook Air wont startup after login

    my MacBook Air wont startup after login???

    Try to boot your computer in Safe Mode: restart and hold the shift key down.
    This can take some time, so be patient.
    Explanation here: http://support.apple.com/kb/ht1564
    If thyis leads to the computer booting, you can restart without holding the shift key down.

  • Lightroom CC wont startup after installation on mac

    lightroom CC wont startup after installation on both my mac's, it only hows a splash screen at startup.
    I have tried to restart the computer
    Anybody know what to do ?

    I'm having the same issue and the log out and back in trick is not working for me.
    I've just installed and when I try and launch the application, i see the splash screen for a split second and then the application crashes.
    It is happening on both of my Retina MacBook Pros.
    One is: Late 2013 Retina 15" MBP - 2.6 i7 - 16GB RAM - 1TB SSD - NVIDIA GeForce GT 750M 2GB
    The other is Early 2013 Retina 15" MBP - 2.7 i7 - 16GB RAM - 256 SSD - NVIDIA GeForce GT 650M 1GB
    Same behavior on both.
    I've uninstalled and reinstalled. I've trashed pref files. Not sure what else to do.

  • "Build Application/settings/Advanced/Run after installation" is not working LV70

    Hi !
    Look at thread
    http://forums.ni.com/ni/board/message?board.id=170&message.id=129269
    Seems like "Run executable after installation" is not workin at all (LV70, W2K).
    I' been try all,
    - run directly *.BAT file
    - i great exe file what' s runn *.BAT file.
    If i run directly "CmdPrompt3.exe" (attachment , source) it's working but not
    with when i run "setup.exe" ?
    What is wrong ?
    What means "wait until done" ?
    BR
    -HeVi-
    Attachments:
    CommandPromt3.vi ‏23 KB

    Hi HeVi,
    I'm not sure that I completely understand what your issue is. Are you
    trying to launch a BAT-file after the installation of an application?
    In that case, I will recommend you to refer to the following
    KnowledgeBase:
    Running a Batch File Automatically After an Installation to Access Installed Files
    If the methods in this KB doesn't work, please let me know.
    Have fun!
    PS: I wish it was only 25 degrees celsius here - it's currently around the 40 degrees celsius in Austin...
    Message Edited by Philip C. on 07-08-2005 02:42 AM
    - Philip Courtois, Thinkbot Solutions

  • LV 8.5.1 Installer "run after installation" not executed in silent mode ; Autoupdate

    Hi all,
    I developed a software used "inhouse" by most of my colleagues. This software is changed continuously.
    In the past I had to inform everyone that there's a new release available.
    Thus I developed a "quick and dirty" autoupdate mechanism. (See attachments)
    The application looks for a file located on our server, which contains the version number of the most current release.
    If the version number of the installed software and the version number in this file differ, the Installer for the new release is executed.
    In the Installer settings I run the installed software after installation finished.
    So that the user doesn't notice there was an update and the software starts as allways.
    The installer is started with commandline options to install in silent mode with surpressed License Notification und supressed restart.
    The start of the installed software after installation works if I start setup.exe in "normal" manner (doubleclick setup.exe)
    BUT the software DOES NOT start after installation when installed in silent mode. (Commandline prompt: setup.exe /q /AcceptLicenses yes /r:n )
    (Tested with XP, Vista, 7)
    Does anyone know how to get this working ?
    Thanks in advance, best regards,
    Balze

    Balze wrote:
    Hi Andrey,
    neither /qb nor /qf works
    Well, just checked - it seems to be works as expected in LabVIEW 2010 and doesn't work with 8.5.1 as you have described.
    There are some bugs in installer's builder was fixed between versions 8.5 and 10.0.
    What you can do - upgrade to latest LabVIEW version or try to fix installer manually. I guess trouble present in \bin\dp\install.msi file. You can check what inside of msi with Orcas utility provided by Microsoft.
    Hope it helps,
    with best regards,
    Andrey.
    PS
    Whole family a little bit ill due to relative cold weather...

  • Adobe Air Application Crash After installation

    Hi,
    We have developed a windows application "DsNetHTML5Player" in Adobe Air which shows HTML pages in sequence using <mx:HTML> control. When I run application in "Flash Builder" all plays fine.After creating its build and installing on system (Windows 7) application crashes with following error.
    Faulting application name: DsNetHTML5Player.exe, version: 0.0.0.0, time stamp: 0x4d7a7dd2
    Faulting module name: WebKit.dll, version: 6531.9.0.0, time stamp: 0x50fcd627
    Exception code: 0xc0000005
    Fault offset: 0x000a99ac
    Faulting process id: 0x19c0
    Faulting application start time: 0x01d00ae266bc2b46
    Faulting application path: C:\Program Files\DsNetHTML5Player\DsNetHTML5Player.exe
    Faulting module path: c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\WebKit.dll
    Report Id: 99882a24-76d6-11e4-a3ad-005056c00008
    If anyone has any idea what the problem could be here, please let me know.
    Thanks
    Umair

    Could you open a new bug report on this over at bugbase.adobe.com.  Please include a copy of your app (or a sample project) along with steps to reproduce.  Once added, please let me know the bug number and I'll have somone take a look ASAP.
    Thanks,
    Chris

  • InDesign CS4 don't run after installation

    Before installation of InDesign CS4, InDesign CS, InCopy CS3 and Bridge CS3 runs normally.
    After installed, InDesign CS4 don't run, and crashes (during 'Initialising application") with this log:
    AppName: indesign.exe
    AppVer: 6.0.3.557
    ModName: gdiplus.dll
    ModVer: 5.1.3102.5581
    Offset: 0002c72d
    InCopy CS3 no more run and report log:
    AppName: incopy.exe
    AppVer: 5.0.0.458
    ModName: gdiplus.dll
    ModVer: 5.1.3102.5581
    Offset: 0002c72d
    Bridge CS4 and ExtendScript Tookit CS4 don't run too. Here the logs:
    AppName: bridge.exe
    AppVer: 3.0.0.464
    ModName: gdiplus.dll
    ModVer: 5.1.3102.5581
    Offset: 0002c72d
    AppName: extendscript toolkit.exe
    AppVer: 3.0.0.41
    ModName: gdiplus.dll
    ModVer: 5.1.3102.5581
    Offset: 0002c72d
    Adobe support says this is a problem on the OS; Microsoft says the problem is on the application. I paid for Adobe product and cannot use it.
    I tried to update InDesign CS4, but this don't solved the problem.
    Acrobat 9 Pro and Photoshop CS runs normally.
    And I'm desperate. Please help.
    Thanks,
    coelho9

    After months of numerous attempts and frustration, I applied Microsoft KB958869 and... InDesign CS4 now runs fine. And I'm starting a new life after two decades working happily with PageMaker.

  • Binaries don't run after installation of 8.1.7 on AIX 5.1

    I'm new in installations over Unix systems and I'm experiencing an issue that you all should know how to solve this. After the installation procedures, I'm trying to run SVRMGRL or SQLPLUS, but I can't, it keeps giving me this error messages:
    exec(): 0509-036 Cannot load program sqlplus because of the following errors:
    0509-130 Symbol resolution failed for sqlplus because:
    0509-136 Symbol pw_post (number 273) is not exported from
    dependent module /unix.
    0509-136 Symbol pw_wait (number 274) is not exported from
    dependent module /unix.
    0509-136 Symbol pw_config (number 275) is not exported from
    dependent module /unix.
    0509-136 Symbol aix_ora_pw_version3_required (number 276) is not exported from
    dependent module /unix.
    0509-192 Examine .loader section symbols with the
    'dump -Tv' command.
    Anyone knows what's happening?
    My product is Oracle 8.1.7 32bits, and my AIX is 5.1 64bits, but I've heard that it works anyway!
    Thanks.

    John, I've runned this script as root. Then executed as oracle the runInstaller script. Today I've also acquired the 64bit version of the 8.1.7. The problem persists the same. So I'm presuming that there's nothing wrong in installing a 32bit oracle product over a 64bit AIX system. Right now I'm stopped at the installation process, waiting for an assistance. I've activated the 64bit mode on AIX 5.1, and started the installation again. I'm having a lot of error messages about some "makefile" at the ins_rdbms.mk script file. Don't know what to do!

  • What script to run after installation

    Hi gurus,
    I 'v just installed 11.5.5 "prod". Is there any script to run or i can start my implementation straight off.

    You must complete the following tasks to successfully install Oracle Applications 11.5.5:
    - Check the installation manual to complete the post installation steps
    - Read the Known Product Issues section of these release notes and determine when to take the actions listed there
    - Read the Installation Update Notes for your platform
    - Follow the instructions in Installing Oracle Applications to complete your installation of Oracle Applications Release 11i
    - Use AutoPatch to apply AD mini-pack F
    Note: You may be required to apply AD mini-packs as a part of your Oracle Applications installation, even after you have completed your implementation.
    Oracle Applications databases included in Rapid Install 11.5.5 have invalid objects in both the fresh-install production database and the Vision Demo database. You can safely ignore these errors.
    Note: 155875.1 - Release 11.5.5 Release Notes
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=155875.1

  • Flash player just wont work after installation

    Tried 30 times; I am giving up now; windows 7

    Browser is explorer; It installs in my programs upon start up; I save the download and run it; but when I get facebook videos from friends, it says install flash player; I removed the old program and install it again but to no avail. It is amazing to me how Adobe wont download automatically and work. It is enabled in the browser.   I need someone to give me in detail what I should do,

  • Knowledge Center wont load after installation

    Hi all
    I've been trying to install KC (version 11.1) on a new blank Win2008R2 server with MS_Sql for a few times now. I've followed the instructions to the letter and every instlation ends up with a failure to load the system login page.
    The install itself says "sucessful" with no errors along the way however once i try to enter the URL or even try to brwose the Kcenter virtual directory via IIS Browse function all i get is "the page can not be displayed.
    I've cheked the IIs and the website is accessible. other virtual directories are also accessible via web. only the Kcenter site seems to be "unreachable"
    Server details: Win2K8R2
    DB: MSSQL2008R2Express
    Client: Win7, using IE9 and FF 9.0.1
    I also made sure the site is on my trusted site list and verified cocles are enabled....
    HELP!

    Hi Alexandre
    Yes the URL is directing to the /KCenter virtual directory. The problem is not the login page - the problem is that i dont even get that far.
    Once the url is entered the page starts to load and ends up with no results. the reply is "Internet Explorer cannot display the webpage"
    I've eliminitad the browser to be a problem after allwoing all cockies and reapting this with FF (cockies enabled as well)
    I've been repeating the installation for several times now, both on Win2K8 and Win2K3 and the same result.
    As if the application will not run :-(
    I tried to verify if the installation is currepted but i also used the same copy to install UPK Sever, Client and Single Seat and nothing (including in the KC instllation) had alerted a failure.
    All the other three were installed and worked with no issues.... only the KC will not load :-(
    HELPPPP!!!

  • ITunes 10.1.1 for Windows (64-bit) Does Not Run After Installation

    I recently upgraded my laptop to Windows 7 and downloaded the 64-bit installer (iTunes64Setup). Although I recieve the notice that it was installed, when I start it up, I receive the "iTunes Library.itl cannot be read..." error message whenever I try to start it.
    I have uninstalled the program, deleted the original setup file (iTunes64Setup), downloaded it again and re-installed it twice with no success.
    Is there something I am doing wrong? Any assistance is greatly appreciated.
    Thanks,
    John

    Finally got it installed and running.

  • Photoshop elements 13 wont open after installation... it is already registered ...when i double click to open, it says sign on needed with adobe id, when i sign on, it still wont open...

    i installed photoshop elements 13 on my desktop, it wont open, even after I sign on with adobe id and agree to licensing...

    Go to online chat and they will reenter the redemption numbers and the serial number again for you.

Maybe you are looking for