Aircards and routers

I have a laptop with a aircard and want to set up a wifi connection for my other computer and my Wii. Is there a router or access point out there for problem? Help

I don’t think that there would be any problem in router & aircard …..Try to configure the aircard & see if it works.

Similar Messages

Email Notifications for Switches and Routers

Dear All,
How may I configure switches and routers to send email notifications when link is UP/Down.
We have Switches - ((C3750-IPBASE-M), Version 12.2(25)SEB4) & Routers - (C2900-UNIVERSALK9-M), Version 15.1(4)M3.
Thanks in Advance,
Best Regards,
Taufeeq.

You can use EEM scrip to achieve the same. Just check EEM scripting in the community directory for some examples.
Regards,
Sathvik

Rebooting switches and routers

Is it a good practice to reboot your switches and routers periodically and is there anything gained by doing this??

The only instance in which I would say this is unequivocally a good idea is one in which a known bug is causing, say, a memory leak which, uncorrected, will lead to a system crash. In that case, one would monitor memory usage and schedule preventitive maintenance reboots to forestall an unplanned outage.
Other than something like that, the practice of keeping one's IOS/CatOS relatively current (i.e., at least on a supported release) and analyzing new features for utility in your environment (or, more likely bug or vulnerability fixes) would more likely be the catalyst for introducing a new software version (and thus indirectly requiring a reboot to load the new code).
Hope this helps. Please rate it if it does.

Switches and routers in the rack

Hi guys,
I am mounting few switches and routers in a rack in our new office. I am new to this and was wondering if I can stack them all on top of each other or need some gap for ventilation?
The rack is in a server room which has proper ventilation and cooling.
Please share your experience. Thanks.

Remember this: Hot air goes up, cooler air goes down.
If you are trying to keep your appliances cool then rack-mounting them on the top is a useless exercise.
I normally rack-mount routers and switches halfway down the rack. I leave 1 RU between them to put cable-management. You can find 2RU cable management if you have thick cables or if you have a 48-port switch.
Another thing: Never, EVER, mix copper cable and fibre optic cable in the same cable management.
When it comes to copper cables, make sure you use "snagless" ones. Also, for the sake of future troubleshooting, make sure you use good brand cables like Panduit or Krone. Don't get "sold" by those cheap copper cables that are reputed to be "tested" and/or "GigabitEthernet ready".

Cisco Prime 2.1.2 auto sync config for switches and Routers

hello Support,
how to configure auto sync config in CPI? when the customer make a changes in the switches and Routers, the customer expect a new version of the configuration in CPI immediately. but we are getting the new version after 10 minutes. if we not configure in the switches and Routers to send syslog we are not getting anything.
where we have to configure in CPI to get the new versions immediately?
thanks!

Make sure you have completed the recommended preparation steps given in Before You Begin Installing the Patch.
If you are not using the Prime Infrastructure High Availability (HA) feature, follow the steps in Installing the Patch instead of the steps below.
If your current Prime Infrastructure implementation has High Availability enabled, follow the steps below to install the patch. You must start the patch installation with the primary server in “Primary Active” state and the secondary server in “Secondary Syncing” state.
Patching of the primary and secondary servers takes approximately one hour. During that period, both servers will be down. If you have trouble at any point, see Troubleshooting Patch Installs in HA Implementations.
Step 1 Ensure that your HA implementation is enabled and ready for update:
a. Log in to the primary server using an ID with Administrator privileges.
b. Select Administration > System Settings > High Availability , The primary server state displayed on the HA Status page should be “Primary Active”.
c. Select HA Configuration . The current Configuration Mode should show “HA Enabled”.
d. The Failover Type must be set to “Manual” throughout the patch installation. If Failover Type is currently set to “Automatic”, select “Manual” and then click Save .
e. Access the secondary server’s Health Monitor (HM) web page by pointing your browser to the following URL:
https:// <ServerIP> :8082
where ServerIP is the IP address or host name of the secondary server.
f. You will be prompted for the authentication key entered when HA was enabled. Enter it and click Login .
g. Verify that the secondary server state displayed on the HM web page is “Secondary Syncing”.
Step 2 Download the patch:
a. Point your browser to the software patches listing for Cisco Prime Infrastructure 2.1.
b. Click the Download button for the Release 2.1.2 patch file (pi212_20141118_01.ubf), and save the file locally.
Step 3 Install the patch on the secondary server:
a. Access the secondary server’s HM web page by pointing your browser to the following URL:
https:// <ServerIP> :8082
where ServerIP is the IP address or host name of the secondary server.
b. You will be prompted for the authentication key entered when HA was enabled. Enter it and click Login .
c. Choose the HM web page’s Software Update link. You will be prompted for the authentication key a second time. Enter it and click Login again.
d. Click Upload Update File and browse to the location where you saved the patch file.
e. Click OK to upload the patch file.
f. When the upload is complete: On the Software Upload page, verify that the Name, Published Date and Description of the patch file are correct.
g. Select the patch file and click Install . When the installation is complete, you will see a popup message confirming this.
h. After the installation is complete on the secondary server, verify that the Software Updates page shows:
– In the “Installed” column: A “Yes” opposite the listing for this patch.
– In the “Pending Restart” column: A “Yes” for the secondary server. Do not restart the secondary server at this point.
Step 4 Install the patch on the primary server:
a. Log in to the primary server using an ID with administrator privileges and choose Administration > Software Update .
b. Click Upload Update File and browse to the location where you saved the patch file.
c. Click OK to upload the patch file.
d. When the upload is complete: On the Software Upload page, verify that the Name, Published Date and Description of the patch file are correct.
e. Select the patch file and click Install . When the installation is complete, you will see a popup message confirming this.
f. After the installation is complete on the primary server, verify that the Software Update page shows:
– In the “Installed” column: A “Yes” opposite the listing for this patch.
– In the “Pending Restart” column: A “Yes” for the primary server. Do not restart the primary server at this point.
Step 5 Stop the servers in the following sequence, using the commands explained in Running Commands:
a. On the secondary server, run the ncs stop command.
b. On the primary server, run the ncs stop command.
Step 6 Re-start and monitor the servers in the following sequence, using the commands explained in Running Commands:
a. On the secondary server, run:
– The ncs start command to restart the secondary server. Wait for the processes on the secondary to restart.
– The ncs status command to verify that the processes on the secondary have re-started.
– The ncs ha status command to verify that the secondary state is “Secondary Lost Primary”.
b. Once the secondary server is in “Secondary Lost Primary” state: On the primary server, run:
– The ncs start command to restart the primary server. Wait for the processes on the primary to restart.
– The ncs status command to verify that the primary’s Health Monitor and other processes have re-started.
Once all the processes on the primary are up and running, automatic HA registration will be triggered. This normally completes after a few minutes.
Step 7 Once registration completes, verify the patch installation as follows:
a. Run the ncs ha status command on both the primary and secondary servers. You should see the primary server state change from “HA Initializing” to “Primary Active”. You should see the secondary server state change from “Secondary Lost Primary” to “Secondary Syncing”.
b. Log in to the primary server and access its Software Update page as you did earlier. The “Installed” column should show “Yes” and the “Pending Restart” column should show “No” for the installed patch.
c. Access the secondary server’s Health Monitor page as you did earlier. The “Installed” column should show “Yes” and the “Pending Restart” column should show “No” for the installed patch.

Phone line and routers

I moved to this house in 2006 and was with BT for phone and broadband. I had all sorts of problems and after several engineer visits and a few replacement routers, I switched to Talktalk. Since then I have had intermittent service problems, with DSL dropping in and out and sometimes losing all services. Replacement routers were again provided as the solution.
In January, after six years of an average 2.5mb connection I decided to opt for BT Infinity, BT Vision, BT phone and the free new line on offer.
I now have no DSL, my number has been changed, but at least Openreach have identified a major cable fault.
In anger I cancelled my original order, but quickly re-ordered. Now I have no idea what is happening with the new cable and the Infinity engineer is due on the 4th March.
Tonight I emailed details to a very helpful sales operator, with whom I placed my latest order. I even forwarded details to Warren Buckley, with a few positive suggestions.
My new payments were taken immediately from my bank account, but I still await promised refunds. We can reluctantly manage another week or so, without broadband, but I will let you all know how things progress!
Any useful advice, or help that can be offered will be much appreciated!
Brian

And if live chat are unable to help
I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Using att aircard and mac asking for password

Recently purchased a new air card from ATT (Globetrotter - Option ( the company) Velocity (the device) and window comes up asking for my password. I type it in and tells me incorrect password. I've spent HOURS on the phone w/ tech support from ATT, aircard company. Can anyone help me? Please!

Is your Caps Lock key active?

Unable to boot a ws-c2960-48tc-l, recovered switches and routers before but this one stuck me.

Any suggestions??
This is where I'm at:
I'm using Secure CRT with a baud rate of 115220
switch: set BAUD 115200
switch: format flash:
switch: copy xmodem: flash:c2960-lanbasek9-mz.150-2.SE6.bin
switch: set BAUD 9600
switch: boot flash:c2960-lanbasek9-mz.150-2.SE6.bin
switch: boot
Loading "c2960s-universalk9-mz.152-1.E2.bin"...c2960s-universalk9-mz.152-1.E2.bin: no such device
or
switch: boot flash:c2960-lanbasek9-mz.150-2.SE6.bin
Loading "flash:c2960-lanbasek9-mz.150-2.SE6.bin"...flash:c2960-lanbasek9-mz.150-2.SE6.bin: magic number mismatch: bad mzip file
Error loading "flash:c2960-lanbasek9-mz.150-2.SE6.bin"

hello thompson318,
most probably the following mentioned error/ messages you are getting is due to bad IOS, the IOS is corrupted, i would suggest you to use another well-known working/ verified IOS and to upload it to the switch using Xmodem...
magic number mismatch: bad mzip file
here is some links for your reference:
http://www.youtube.com/watch?v=zxTO5qxti-I
http://www.cisco.com/c/en/us/support/docs/routers/2600-series-multiservice-platforms/15085-xmodem-generic.html
please note, if there is no enough space on the flash to handle the new and the old IOS image, i would suggest you to upload old/small IOS to fits into the flash, then you can delete the old corrupted one and to upgrade to new IOS image...
Kind Regards,
/Osama

UFO WiFi and Routers

So I have an older UFO type Airport..... two to be exact. Both are wired into our LAN at the office and are connected to our Modem/Router from ATT.
Is there a way for these units to act as WiFi points w/o acting as routers? Currently, they give out IP addresses different from the host router, but that prohibits file sharing among other things....
Ideally, we'd like to create a 'mesh' network.... one wi-fi network for the whole office using these two Airports, but still getting IP addresses from the ATT modem/router.
If its possible, I just don't see a way to make it happen....
Any ideas?

Is there a way for these units to act as WiFi points w/o acting as routers? Currently, they give out IP addresses different from the host router, but that prohibits file sharing among other things....
Yes, they can be configured as bridges to allow the ATT router to provide NAT & DHCP services for the entire network.
To set up the new AirPort Extreme Base Station (AEBS) as a bridge, either connect to the AEBS' wireless network or temporarily connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, using the AirPort Utility, make these settings:
Internet - Internet Connection tab
o Connection Sharing: Off (Bridge Mode)
o Click Update to apply the new settings.

Voip and routers

I have aqustion
asking about IP telphony
dose cisco recomended to by a router with built in voip tecknolgy and not recomended to by a voip card
whate is different between the two choices
which is better or less cost

I'm not sure exactly what you mean by a router with voip technology since may routers have voip features depending on the feature set. The only way to get around having a voip/voice card in the router is if you're going to use a VoIP provider such as a SIP provider for outbound calls.

Apple and routers

Hi,
There is a list kicking about on here with a list of routers that apple recommends for use with iChat AV. Its not very comprehensive.
My question is, does Apple UK actually sell any of these products?
Stu.

Hi Stuart,
for the
<hr>
The thing to look for a a modem or router that suits what you want to do. Like
1) Connect Multiple computers
2) be configurable.
3) have different methods of Opening the ports. Like UPnP etc.
4) Not be too involved in special features like QoS, Denial of Service attack prevention, outgoing packet filtering and the like.
7:22 PM Friday; February 17, 2006

Same computer 2 different locations and routers, same ip address problem

Hi I have looked through the forums and have tried many of the different suggestions. My daughter has an imac g5. went to her house to get it hooked up wirelessly to her router, spent two days trying and never could get it to connect to the internet, though it did show a good signal. macbook connected fine in the house and a laptop Pc also connected automatically. Finally just moved computer closer and connected by ethernet. Daughter is home now with imac g5 and a different wireless router that currently has two computers connected to it working fine. Well her computer again will not connect to the internet. It will at times very briefly, and from wHat i have seen starts out with a good ip address and then loses it and gets a self assigned 169. address.
Not sure why it cannot keep the right address, like the other computers can. I updated to 10.5.6 when i was connected by ethernet and then I was able to connect for about 20 minutes. came back to computer an hour later and I was not able to.
Any body have any insight into this?

well that occurred to me buy why would the router work with all the other devices in the house and including people that come in with iphones and such. and so both routers at both locations needed updating. I will give that a try. I see alot of posts about this issue and many different suggestions but not many fixes. thanks.

Session handelling and routers

Hi,
this is a simple yes or no question. If you know the answer this will only take a few seconds of your time.
We plan to develop an application using java session objects and run it on multiple servers balanced by an Alteon webswitch. Can webswitches read the session id (called jsession id) even if the end user has cookies disabled (ie the jsession id is written in the url)?
If you have done this, or know this can definately be done, just say "YES". We will figure out how later on.
Thanks in advance for your help,
Sean Cronin.

Yes. The session object relies on cookies and/or URL re-writing. the sessiontracker just decides what methode to use depending on cookies enabled or not.

Verizon Aircard and Wireless Router

I have a ZTE AD3700 aircard from Verizon for Internet access. Is there a compatible wireless router for my aircard so I can also connect an iPad I got as a gift?

ZTE AD3700 aircard is wireless USB card .
I don't think that there is any Linksys router which has USB port for Internet connection.

Privilege Levels on FWs, switches and Routers

One question - I am bothered with the privilege level settings.
Is there a default mapping between a priv lvl and teh commands you are allowed to execute or one needs to define that.
EX: I want somebody to only have the right of executing sh run on a device and nothing more.Can this be done?
Thx,
Vlad

I would start by configuring a privilege level and then use the ? to list all the commands available at that level.
privilege level 0 - Includes the disable, enable, exit, help, and logout commands.
privilege level 1 - Normal level on Telnet; includes all user-level commands at the router> prompt.
privilege level 15 - Includes all enable-level commands at the router# prompt.
Commands available at a particular level in a particular router can be found by typing a ? at the router prompt. Commands may be moved between privilege levels by using the privilege command, as illustrated in the example. While this example shows local authentication and authorization, the commands work similarly for TACACS+ or RADIUS authentication and exec authorization (more granularity in control of the router may be achieved with implementation of TACACS+ command authorization with a server.)
Additional details on the users and privilege levels presented in the example:
User six is able to Telnet in and execute the show run command, but the resulting configuration is virtually blank because this user cannot configure anything (configure terminal is at level 8, not at level 6). The user is not permitted to see usernames and passwords of the other users, or to see Simple Network Management Protocol (SNMP) information.
User john is able to Telnet in and execute the show run command, but only sees commands that he can configure (the snmp-server community part of the router configuration, since this user is our network management administrator). He can configure snmp-server community because configure terminal is at level 8 (at or below level 9), and snmp-server community is a level 8 command. The user is not permitted to see usernames and passwords of the other users, but he is trusted with the SNMP configuration.
User inout is able to Telnet in, and, by virtue of being configured for autocommand show running, sees the configuration displayed but is disconnected thereafter.
User poweruser is able to to Telnet in and execute the show run command. This user is at level 15, and is able to see all commands. All commands are at or below level 15; users at this level can also view and control usernames and passwords.
HTH

Aircards and routers

Similar Messages

Maybe you are looking for