AIRLaunch Pad not working so well

I had a previous version of Launch Pad, but when I ran it, it said there was an update, but when trying to do the update, it says there is some "error" with trying to install the update (was not much more specific than that). So then I just ran it without the update, but then most of the buttons in the UI had no text! So I deleted it entirely, and then ...
I just downloaded and installed the most recentl 3.0.1 version and installed (OS X 10.7) ... and the UI is almost entirely without text (!!!). There is no indication whatever of what buttons do what.
The app works fine, but I can;t read the UI without text. What is missing here?
Anyone have any insights?

Okay, so I'm really trying to solve this. I went and downloaded the AIR Launch Pad again, but it is still not showing any text. Here is a screen shot:
I would love to use this ... but maybe not very helpful ... IF I CAN'T READ THE UI !!!
So then I went to try to re-install AIR again ... and after downloading the installer, and clicking the AIR installer, I get this message that says "this application" (the AIR installer), "requires a version of Adobe AIR which cannot be found". What? I need AIR to install AIR? Please.
WHAT TO DO???

Similar Messages

HT1899 Installed windows 8 through boot camp ,track pad not working

I installed windows 8 though boot camp , track pad not working

The update to boot camp is now available!
Just installed Windows 8.1 Pro to my MacBook Pro, Retina, Mid 2012, OS X 10.8.5: Memory 16GB 1600MHz DDR3
After going through the usual process from boot camp, then installed windows and the support drivers... the trackpad rt click did not work. I had to then go download the boot camp again from windows 8 using the url below and ran the set up.exe from the boot camp folder you can download from below. Run it within windows 8.
http://support.apple.com/kb/dl1638
Boot Camp Support Software 5.0.5033
This solved the Trackpad Right Clicking issue (not working) as well as tapping.
The wireless and network connectivity issues where resolved as well. The Boot camp support software enabled a boot camp control panel available in the windows 8 system tray and from there you can enable the track pad to tap and use the secondary click.

Tac pad not working correctly

tac pad not working correctly

I assume you mean "track pad?" If so, how is it not working? Be specific. If not, what do you mean?

Some time tech pad not working correctly

I am buy a HP Pavilion laptop from awok.com. Some time mouse teach pad not working correctly some time open windows 8.1 time bar and some time i am using mouse teach pad then automaticly come right click popup menu coming some time i am try to scrol the page using mouse pad then automaticly Select all from the page so please help me

Hello @BABUMON ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Notebook and mouse freezing. Here is a document on how to troubleshoot the mouse and Touchpad sensitivities.
If you will go to the section on Adjusting TouchPad or ClickPad pointing sensitivities it should help resolve the issue.
I would be happy to assist if needed as there are many models of HP Notebooks, I would need the model number.
How Do I Find My Model Number or Product Number?
Please respond with which Operating System you are running:
Which Windows Operating System am I running?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

TS1702 How do I get a refund for an app that did not work/deliver well at all?

How do I get a refund for an app that did not work/deliver well at all?

You may not get a refund, but you can try contacting itunes support and asking.
Click Support at the top of the page, then click the link under Contact Apple Support.

Worker does not work so well

Hi everyone,
     I am trying to decrypt an encrypted video in my opne-source project SparrowPlayer(https://github.com/yatsen-yang/SparrowPlayer),and I found that decrypting the video may block the main thread for several seconds.It resulted in stopping renderring UI assets on the stage, which is unacceptable.So I think 'Worker' may do some help. I followed the example code of the online API about Worker(http://help.adobe.com/zh_CN/FlashPlatform/reference/actionscript/3/flash/system/Worker.htm l). I tested and it worked well.
     But I found that if I embed the BGWorker.swf in other class like com.xx.Test instead of in the document class, 'Worker' did not work so well.Sometimes main worker could not communicate with bgworker even that the state of bgworker is running.
The example code followed:
    private function handleBGWorkerStateChange(event:Event):void
          if (bgWorker.state == WorkerState.RUNNING)
                  _statusText.text = "Background worker started";
                 bgWorkerCommandChannel.send(["startCount", 100000000]);
    It happened sometime, not everytime. If main worker send a message after 1 second when listerning that the state of bgworker is running, the code works well
    So it confused me. Logically, if the state of bgworker is running, it should mean that main worker can communicate with bgworker, and it works well if you embed the bgworker swf in the document class.But if you embed the bgworker swf in other class, you will have problem sometime.
    Finally, I found a solution.I embed the bgworker swf in other class instead of in the document class, and when bgworker initializes succesfully, it send a message to main worker.Main worker communicates withe bgworker immediately if it receives the message coming from bgworker.Now the problem is solved.
    I want to know why the state of Worker not reliable when I embed the bgworker swf in other class.Is it a bug of Worker?
    thanks

We would need to debug it to definitively understand the problem. I would recommend filing a bug with a simplified example that demonstrates the problem. If you post the bug number here, I'll escalate it to the engineering team.
Also, have you tried multiple browsers? We can always do that triage here, but it would be an interesting data point.

TS1538 red dot glowing on proximity sensor of my iphone 4 and it is dead. it is not connecting with itunes. tried hard reset it's not working as well. also followed iphone troubleshooting assistant but also it's not working. what am i supposed to do now?

red dot glowing on proximity sensor of my iphone 4 and it is dead. it is not connecting with itunes. tried hard reset it's not working as well. also followed iphone troubleshooting assistant but also it's not working. what am i supposed to do now?

Make an appointment at the Genius Bar at your local Apple Store or take the phone into an Authorized Apple Service provider.

Touch pad not working with HP G60 operating on Windows 7

I have a HP G60 operating on Windows 7 (not sure bit) and have problems with touch pad not working.
I was using touch pad and wireless mouse interchangeably for past year.
No recent changes made to system. Suddenly not work one evening. Have tried shutting down and left overnight which has not resolve problems. On one occasion, i was not even able to type and that resolved after re-starting computer.
There is a button between space bar and top of touch pad which is white. Even when i press and turn red, it has not changed situation. Therefore I have to use my wireless mouse to operate for the moment.
Would appreciate any advice about what is the problem and ways to resolve it.
Thanks a lot!
Mo

Hi,
The numbers are fine
Try the following.
First, ensure the Touchpad is switched on ( the light between the Touchpad and the Spacebar should be white ), then download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp44501-45000/sp44940.exe
Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
When this has completed, shut down the notebook, remove any external devices connected to the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
When windows has fully reloaded - it will automatically load a generic driver for the Touchpad, but just let it do this. Then open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I keep getting a message that my ipad could not be activated because activation server is unavailable and when i try to use itune its not working as well.Plssss help

i keep getting a message that my ipad could not be activated because activation server is unavailable and when i try to use itune its not working as well.Plssss help

Has this iPad ever been jailbroken, had the OS rolled back, or used a beta version?

HT201210 my i pad not work

my i pad not work and when i do the restore from iTunes also not work just run until the battery finish ! what is the solution ?

Try here:
https://discussions.apple.com/community/developer_forums?categoryID=164

My mac won't restart, shut down, or go to sleep. And the volume and brightness does not work as well.

My mac won't restart, shut down, or go to sleep. And the volume and brightness does not work as well.

Connect the computer to the power.
Hold the power button down for 10 seconds or more.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

HP Pavilion Volume Touch-Pad NOT WORKING | NO SOUND HELP

HP Pavilion Volume Touch-Pad NOT WORKING
I have an HP Pavilion dv3t - 2000, Windows Vista computer.
SOMEONE DID ALREADY HELP ME HERE WITH THIS PROBLEM BUT THEY STOPPED RESPONDING | Please check that link out!
The volume touchpad above the keyboard is not working properly (There is no sound coming out of the speakers or the headphone jack) , If you touch the megaphone part of the touchpad above the keyboard then it stays red, however the sound icon on the taskbar changes from mute to unmuted when you touch the red megaphone. The volume slider on the touchpad works suprisingly.
I don't know if I uninstalled something or what but I need this problem fixed!
Thanks!

Hi,
Shut down the notebook, unplug the AC Adapter and remove the battery.
Follow the procedure detailed on Page 63 of your Maintenance & Service Guide to remove the RTC battery. Hold down the power button for 30 seconds.
Leave the notebook for 10 minutes and then re-insert the RTC battery, re-assemble and replace the cover, insert the battery, plug in the AC Adapter and start the notebook. Tap away at f10 as soon as you start the notebook to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
If you still have no audio and the installer you downloaded previously still doesn't detect the Hardware, it would start to look like a Hardware failure, but to try and rule out any further software cause, try the following.
Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run. The 'Try it' option runs the OS from the CD without the need to install on your HDD. If this runs Ok ( it will be slow running from a CD ) and you still have no audio output, this would tend to confirm a Hardware issue.
http://www.ubuntu.com/desktop/get-ubuntu/download
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Synaptics Touch pad not working

Hi there,
My Synaptics Touch pad not working.
System: HP ProBook 4540S, MS Win8 x64 Ent.
Please advise.
Thanks in advance!

Hello needsnow,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your Touchpad on the HP ProBook 4540s running Windows 8 is not working. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

All button and touch pad not working except power button

I face the problems that all button and touch pad not working after power on or wake up from sleep state except power button. And i have make the system sleep and wake again so that the mac book air can working as normal( mouse can move and button got response).

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly. Try performing a hard reset first, if it doesn't work then we'll move to the next step.
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds); (if the computer doesn't power on, move to the next step)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

My hp 430 pc touch pad not working

my hp 430 pc touch pad not working. please help me

****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

AIRLaunch Pad not working so well

Similar Messages

Maybe you are looking for