Aironet 1100 series web interface times out after few mins of inactivity

Hello,
I just upgraded an Aironet 1121G access point to IOS software version 12.3(8)JEC2 (file name: c1100-k9w7-tar.123-8.JEC2). I noticed that the HTTP web interface now times out after an inactivity of just a few minutes (dont have an exact number, but it times out between 2-4 mins of inactivity). Can this timeout period be changed..!? How? This wasnt happenning on the previous software version: 12.3(8)JEB1.
Also, where can I find the online help files for the latest Cisco IOS software? I cant seem to find it on the Cisco website!
Thanks much for all your help.. really appreciate it.

Does anyone have any idea on this..!? Its terrible having to login every couple of mins..!
Thanks :)

Similar Messages

Secure site (OWA) times out after 10 min.

I'm finding that Safari times out the session to OWA (Outlook Web Access) after about 10 minutes. The server side time out is set to 22 min.
Is this something that can be fixed? I see no 'idle time disconnect' prefs in Safari.
The PC's time out properly after 22 min.

I found two things that were causing my troubles.
First, port 25 on the switch going to the server was blocked. After this was opened I was able to receive mail to macosxserver02.binghamton.edu. Since this mail server is only used for Podcast Producer notifications, I'm hoping to have this port closed back down after I get Pcast Producer back up and running and fully tested.
Second, when the upgrade from 10.5 -> 10.6 was performed, in ServerAdmin>Mail>Settings>Domain Name, only the .binghamton.edu was populated in this field, not the full domain name of macosxserver02.binghamton.edu. This was preventing me sending mail to our Google branded .binghamton.edu email addresses. Apparently 10.6 was looking locally for all the .binghamton.edu email addresses.
A big thank you to Gordon for looking into this and helping me get this resolved.
Cheryl

I just upgraded to Mavericks and find that I'm being logged out after 15 mins even though I have set security

I just upgraded my IMac to OS X MAVERICKS and find that I'm being prematurely logged out after 15 mins of inactivity even though my Privacy & Security settings are set to 1 hour. Any suggestions on how to correct this problem?

I just upgraded my IMac to OS X MAVERICKS and find that I'm being prematurely logged out after 15 mins of inactivity even though my Privacy & Security settings are set to 1 hour. Any suggestions on how to correct this problem?

Sun x4170 ILOM - Can't get to the web interface 2 days after password reset

Just bought a used x4170. I was able to get iLOM on the network and get to the web interface logon screen after setting the IP for it.
I tried logging on but the password was not given to me. So I connected to the serial interface (rj45) from another machine and used putty to connect. Got to the preboot point and was able to reset the password to default, Rebooted.
I was then able to log into iLOM. That was 2 days ago. Today for some reason, I can't get into iLOM. It pings but I can't get to the web interface. I get the IE error "cannot connect" or unable to connect or something like that.
I'm completely new to this brand of server so consider me completely ignorant on all aspects of the hardware.......lol
Thanks

Hello
By default, you connect to the server’s service processor (SP) using the out-of-band network management port (NET MGT). The ILOM sideband management feature enables you to select either the NET MGT port or one of the server’s Gigabit Ethernet ports (NET 0, 1, 2, 3), which are in-band ports, to send and receive ILOM commands to and from the server SP. In-band ports are also called sideband ports.
You can refer more here : https://docs.oracle.com/cd/E19269-01/820-7959-11/820-7959-11.pdf
If you want to use the NET MGT port of ILOM, then your output should display similar to below
-> show /SP/network
/SP/network
    Targets:
        interconnect
        ipv6
        test
    Properties:
        commitpending = (Cannot show property)
        dhcp_clientid = none
        dhcp_server_ip = xxxxxxxxx
        ipaddress = xxxxxxxxx
        ipdiscovery = dhcp
        ipgateway = xxxxxxxxx
        ipnetmask = xxxxxxxxx
        macaddress = 00:10:E0:65:2F:20
        managementport = MGMT   <<<<<<<<<<<<<<
        outofbandmacaddress = 00:10:E0:65:2F:20
        pendingipaddress = xxxxxxxxx
        pendingipdiscovery = dhcp
        pendingipgateway = xxxxxxxxx
        pendingipnetmask = xxxxxxxxx
        pendingmanagementport = MGMT    <<<<<<<<<<<<
        pendingvlan_id = (none)
        sidebandmacaddress = 00:10:E0:65:2F:21
        state = enabled
        vlan_id = (none)
Hope this helps.
Best Regards
Bhavyesh

Cisco Aironet 1100 series wireless access point software update!

Hi,
I have a wireless network using 2 cisco aironet 1100 series access points.
From time to time I have problems with connecting a device (Laptop,PC,)to the wireless network.There are onther wireless netwotk that operate around and might be using the same channel.Someone else created the wireless network and I do not know how to access it now to check the configurations on change something.
I cannot conncet my iPhone to the network and I beleive that a software update might solve the problem but I do not know how to do it and where to download it from.
1. How can I update the software and where from?
2.How can I ensure that thare are no interferences and conflicts?
3.How can I ensure that no onther wireless network around is using the same channel?
Thank you in advance.

Sounds good to me. Are you having problems?
Please remeber to rate all replies

HT4356 What printers beside HP will work continuously with an i-pad? I tried Canon and Epson and both time-out after a short time, requiring the user to re-initialize. This defeats the idea of a wireless printer, Thanks Art

What printers besides Hp will work continuously with an i-pad? I tried Canon and Epson and both time-out after a short period of time rerquiring the user to re-initialize, which defeats the purpose of wireless printing. Please help, Apple can not. Thanks to all. Art

Canon support told me that the I-pad printer driver would not work with any printer, including HP. They offered to fix the problem for $50. I turned them down.
If they really could fix the problem, they must be saying to update the printers firmware. Look on the cannon website & update the priners firmware. While you at it, update the routers firmware.
What printer do you have?
List of supported AirPrinters.
http://support.apple.com/kb/HT4356

Mountain Lion downloaded from App store will not install. Downloaded TWICE it times out after 20 secs into install. Can't get any help!!! My Machine MacBook Pro OS 10.6.8 Processor 2.66Ghz i

Mountain Lion downloaded from App store on 11th and 12th June will not install. Downloaded TWICE it times out after 20 secs into install. Can't get any help!!! Going around in circles!!
My Machine MacBook Pro OS 10.6.8
Processor 2.66Ghz i7,
4GB memory
128GB solid state drive
Purchased 2010

Thanks very much for the advice. I trawled through the other answers on the site and it appears others had the same issue. I doubled the available space and the install went like clockwork... which is what one would norma;ly expect from Apple :-)
Maybe Apple should have a ' definitely read me first' notice before a download takes place with CLEAR instructions to have more than the 6GB they indicate ofr the Mountain Lion download

Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occationally. Can we stop Firefox from timing out?

Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occasionally. Can we stop Firefox from timing out? edit

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

When trying to download 4.3.3 for iphone 4 with firewall off and antivirus off but i keep on getting the error code 3259 - sometimes it times out after a few seconds other times it will be half anhour - can anyone help?

Hi,
When trying to download 4.3.3 for iphone 4 with firewall off and antivirus off i keep on getting the error code 3259 - sometimes it times out after a few seconds other times it will be half an hour - can anyone help?
Thanks

Before beginning the download, try temporarily disabling the antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required and is running with that secure OS.

How to increase the web session time out for FDM While data uploading.

I have very large data files of Balance Sheet and Profit & Loss. These are taking very long time while being loaded through FDM. Kindly let me know of the following:
1 - How can I increase the time for "web session time out" in FDM; and
2 - What is the standard data loading time, e.g. how much time should it ideally take for approximately 1,000 lines to be load in Hyperion.
Regards
Amjad
Edited by: ar_aff on Sep 12, 2011 8:30 AM

You supposedly feed it a (undocumented) parameter, -rxidletimeout, with the time in seconds, at startup.
app.serverSettings.sessionTimeout will report back whatever value you fed it. However, in my experience so far, the timeout is somewhere around 30 seconds no matter what value you feed it. I might be doing something wrong.
I currently have a ticket open with Adobe support about this very issue, but it's slow going. I'll try to update you with whatever I find out.
I'd love to hear whether anyone else has this working.
Jeff

Dir API - Web services Time out

Hi All,
I am using Dir API web services to make some mass updates to Config objects. I have developed a client in Java and was able to access/edit the ID objects. The problem I am facing is since the number of objects in the change list is huge ( >1000), the web services time out.
I tried to set the time out parameter for the web service call using
context.put(BindingProviderProperties.REQUEST_TIMEOUT, 600*1000);
also,
context.put("com.sun.xml.ws.connect.timeout", 600*1000);
context.put("com.sun.xml.ws.request.timeout", 600*1000);
None of them seem to have any impact.
Any ideas what is the correct way to adjust this time out behaviour?
Thanks
Jai

Hi RK,
Thanks for that. I am not looking at changing the time outs at Server. I am just interested in changing the time outs for the request I make from the client. The point is I do not want to impact any other services running in the server.
In WS Navigator, it seems possible to change the time out value using Invocation parameters. (Did not try this yet!!)
So it must be possible to set the time out for the request from the client.
Thanks
Jai
Edited by: Jaishankar on Aug 25, 2011 2:49 PM

After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

I had this same problem with what's app. There is a new update for the app on the app store which is compatible with ios8. Update the app, or delete it and re-add it. I found a lot of apps weren't compliant with ios8, but after updating everything worked fine.

When "Log out after X minutes of inactivity" is on, display gets black and a weird pixelation when I move the mouse

When "Log out after X minutes of inactivity" is on, and those X minutes pass by, my MBA logs out. After that, when I want to use it again, I found that display is totally black and if I use the touchpad, then I can start seeing "what is behind" that black screen (Login Window), like you can see on the picture:
I took it to Tech Service and they didnt find out any hardware issue. Any ideas?

I recently found out that this only happens when DISPLAY is set to go to sleep minutes before the "Log out after X minutes of inactivity". I had "Display sleep" option set to 5 minutes and "Log out after 10 minutes of inactivity" and this causes the display to go to sleep first (screen goes black) and then, 5 minutes later, it logs out.
If "Display sleep" is off and "Log out after X minutes of inactivity" is on, the issue does not replicate. So Im thinking it has something to do with the screen being black at the moment it logs out. Can you try and replicate that?
I will be checking the thread you suggested and hopefully oudgrad1764 can find a solution. Thanks a lot.

My wi-fi connection is good & i want restore my iphone.But a massage flash after few min-iPhone could not be activated because the activation server is temporarily unavailable." SIM is in searching mode. What i can do.?

My wi-fi connection is good & i want restore my iphone.But a massage flash after few min-iPhone could not be activated because the activation server is temporarily unavailable." SIM is in searching mode. What i can do.?

You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one.

Cannot override logout after 20 mins of inactivity

Here's an odd one.
I have a couple of iMacs that have the option to "logout after 20 mins of activity" ticked in security preferences.
I don't want this to happen, so as an administrator I can uncheck the option and click the padlock icon to prevent changes.
However, even with the option unchecked, they'll still log out after 20 mins, and when I revisit the security preferences page again, the option will be ticked again.
Any clues, anyone?

Thanks for the reply, but I've tried clicking the padlock and also leaving it alone.
The result is always the same. If I uncheck the the logout option, or change the number of minutes, *it always returns to the same settings when I navigate away from the security preferences*, and then return to them.
There is no "save settings" option, and other checkboxes, like the "require password" option IS retained if I check it.
It's just the automatic logout setting.
This is really frustrating. I didn't setup these particular Macs.
Is there another setting elsewhere that could be overriding this?
Or a preference file to delete?
I really don't understand what's going on.
Any help much appreciated.

Aironet 1100 series web interface times out after few mins of inactivity

Similar Messages

Maybe you are looking for