Aironet 1250 doesnt support Block Ack frames

Hi
I am using this AP and it looks like this AP doesnt support transmitting BA Frames (I see in the capability info element that "delayed BA" = 0, "immediate BA" = 0.
is it possible to upgrade or to configure this?
thanks
Shaul B.

1250 series access points supports Block acknowledgement. Refer to the datasheet http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps6973/ps8382/product_data_sheet0900aecd806b7c5c.html for more information.

Similar Messages

  • Cisco Prime Infrastructure 1.2 and Aironet 1250 + VSS issues

    Hi,
    I  am new to the NCS implementations and configurations. I have one very  specific case with Cisco Prime Infrastructure 1.2 and autonomnous APs  and several issues with Cisco VSS on 6500 switches.
    So here is the version from Prime:
    NCS/admin# show version
    Cisco Application Deployment Engine OS Release: 2.0
    ADE-OS Build Version: 2.0.1.038
    ADE-OS System Architecture: x86_64
    Copyright (c) 2005-2010 by Cisco Systems, Inc.
    All rights reserved.
    Hostname: NCS
    Version information of installed applications
    Cisco Prime Network Control System
    Version : 1.2.1.012
    IOS version on our APs (which are autonomnous) is:
    AP-N-1>show ver
    Cisco IOS Software, C1250 Software (C1250-K9W7-M), Version 12.4(25d)JA1, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2011 by Cisco Systems, Inc.
    Compiled Thu 11-Aug-11 03:23 by prod_rel_team
    Well  the issue what we have now is that access point has been added but its  not recognized by the NCS prime. I have tried all three versions of SNMP  but I get the same result. The SNMP configuration is valid since I use  the same for my switching infrastructure. When I enter "debug snmp packets" and "terminal monitor" I can see the SNMP communication between Prime and Aironet 1250 which is standalone.
    When  I switch to Lifecycle theme and go to Operate > Device Monitor  Center I see all devices I have added. The Aironet 1250 is reachable but  under collection status I get Managed with Warnings. When I hover over  with my mouse I get "None available".
    I  have successfully added my switching infrastructure in total, which is  operating perfectly for Catalyst 2960/3650/3750/4500 series but for 6500  under VSS I have some warnings. The device is recognized by the system  which is excellent and all is operational. I get the following errors  under Collection Status:
    feature_sensor
    SNMP request timed out
    feature_powerSupplyFanStatus-6k
    SNMP request timed out
    IdentityCapability
    The device is unreachable.
    feature_flashdevice
    SNMP request timed out
    sam_ipsla_feature
    The device is unreachable.
    What can be done to resolve these issues ? I have attached a screenshot of this particular issue. The affected access point is 172.16.165.241.
    Predrag Petrovic       

    Hi rajeeshp,
    Currently I am not allowed to upgrade it because of internal procedures involved in upgrading a specific piece of software (obtaining permissions from various departments). Is it free to upgrade from 1.2 to 1.3 or there is a specific charge for that.
    Predrag Petrovic

  • 4 Aironet 1250's and a controller?

    Hi guys,
    I'm about to order a four Aironet 1250's and a 2106 Wireless LAN Controller. From what I've read, I'll need the controller to manage the APs if I want them all to offer the same broadcast domain and subnet, and offer roaming to the users. Often times what I read and understand turns out to have little to do with reality, so my question is, am I correct about this?
    Thanks in advance!
      Joe

    http://www.cisco.com/en/US/docs/wireless/controller/4.2/configuration/guide/c42ovrv.html#wp1133151
    These hardware features are not supported on 2000  and 2100 series controllers:
    •Power over Ethernet (PoE) [2000 series  controllers only]
    Note Ports 7 and 8 on 2100 series  controllers are PoE ports.
    •Service port (separate out-of-band  management 10/100-Mbps Ethernet interface)
    These software features are not supported on 2000 and 2100 series  controllers:
    •VPN termination (such as IPSec and  L2TP)
    •Termination of guest controller tunnels  (origination of guest controller tunnels is supported)
    •External web authentication web server  list
    •Layer 2 LWAPP
    •Spanning tree
    •Port mirroring
    •Cranite
    •Fortress
    •AppleTalk
    •QoS per-user bandwidth contracts
    •IPv6 pass-through
    •Link aggregation (LAG)

  • Aironet 1250 Configuration Help

    Hello to all,
    I'm an  vmware\linux system administrator with very low skills in networking, I just bought 3 Cisco Aironet 1250 2.4ghz + 5ghz for my testing network and I need help to configure them.
    Scenario:
    1 - I have 3 Cisco Aironet 1250
    2 - I want to create 2 wifi networks, SSID guest (vlan 11) and SSID production (vlan 1) in 2.4ghz + 5ghz
    2a- I want to configure security WPA2-PSK without RADIUS Server.
    3 - Aironet 1250 # 1 is connected to ethernet vlan1 (production)
    4 - Aironet 1250 # 2 is connected to ethernet vlan11 (guest)
    5 - Aironet 1250 # 3 is connected to ethernet vlan1 (production)
    These are the first configuration commands found:
    configureno ip domain-lookupline vty 0 4no exec-timeoutenableconfigure terminalinterface dot11radio 0encryption vlan 1 mode ciphers aes-ccmssid Productionvlan 1authentication openauthentication key-management wpa version 2wpa-psk ascii password1guest-modeend        interface dot11radio 1encryption vlan 11 mode ciphers aes-ccmssid Guestvlan 11authentication openauthentication key-management wpa version 2wpa-psk ascii password2guest-modeend
    When I try to set the repeater configuration webinterface tells me configuration errors.
    Any help is welcome, sorry for my newbie!
    Thanks a lot!

    Since each AP is connected via Ethernet, you don't need to set any as a repeater. Here are some links that show you what you need to have multiple SSID's and multiple vlans.
    http://www.cisco.com/en/US/docs/wireless/access_point/12.2_11_JA/configuration/guide/s11ssid.html
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080665ceb.shtml
    Tech Guides
    http://www.cisco.com/en/US/products/hw/wireless/ps4570/prod_configuration_examples_list.html
    Sent from Cisco Technical Support iPhone App

  • Aironet 1250

    I have an interesting problem. I have an aironet 1250. For months my wireless clients has been connecting with no problems. One day there was a power failure, don't remember making any chnages which I should of saved. After, all of my equipment rebooted with no problems. Now I'm seeing my 802.11N clients having connectivity problems. After 10 to 40 mins I believe they get logout, but the client don't get updated to this. The G and the B no problems. Some are Intel chip sets and some are apples base computers.
    Anyone seen this?
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    hostname blackhole
    aaa new-model
    aaa group server radius rad_eap
    aaa group server radius rad_mac
    aaa group server radius rad_acct
    aaa group server radius rad_admin
    aaa group server tacacs+ tac_admin
    aaa group server radius rad_pmip
    aaa group server radius dummy
    aaa authentication login eap_methods group rad_eap
    aaa authentication login mac_methods local
    aaa authorization exec default local
    aaa accounting network acct_methods start-stop group rad_acct
    aaa session-id common
    clock timezone -0500 -5
    clock summer-time -0400 recurring
    ip domain name javabeans
    ip ssh version 2
    dot11 ssid JavaBeans
    authentication open
    authentication key-management wpa version 2
    guest-mode
    wpa-psk ascii 7 033E5D060F0EB78723C3E1815142B053225535E52754556204D116C577F784846032369512E0C40553B2301080C5219177A683E16
    dot11 ids mfp distributor
    dot11 ids mfp detector
    dot11 ids mfp generator
    power inline negotiation prestandard source
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption mode ciphers aes-ccm
    ssid JavaBeans
    antenna gain 2
    speed basic-1.0 basic-2.0 basic-5.5 basic-11.0 basic-6.0 basic-9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
    packet retries 128
    station-role root
    l2-filter bridge-group-acl
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 input-address-list 750
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface Dot11Radio1
    no ip address
    no ip route-cache
    encryption mode ciphers aes-ccm
    ssid JavaBeans
    antenna gain 3
    dfs band 1 2 3 4 block
    speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
    channel width 40-above
    channel 5180
    station-role root
    no dot11 extension aironet
    l2-filter bridge-group-acl
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 input-address-list 750
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface GigabitEthernet0
    no ip address
    no ip route-cache
    duplex auto
    speed auto
    bridge-group 1
    no bridge-group 1 source-learning
    bridge-group 1 spanning-disabled
    interface BVI1
    ip address 10.5.15.1 255.255.0.0
    ip helper-address 10.5.20.1
    no ip route-cache
    ip default-gateway 10.5.1.1
    ip http server
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    ip radius source-interface BVI1
    logging history size 50
    logging history notifications
    logging 10.5.20.1
    snmp-server community java RO
    radius-server attribute 32 include-in-access-req format %h
    radius-server vsa send accounting
    bridge 1 route ip
    line con 0
    session-timeout 30
    line vty 0 4
    session-timeout 30
    sntp server 10.5.1.1
    sntp broadcast client
    end

    this is what I got from the AP
    2009-04-17 15:59:47 Local7.Info 10.5.15.1 214: Apr 17 19:59:46.885: %DOT11-6-ASSOC: Interface Dot11Radio0, Station blackhole 0013.e871.5b29 Associated KEY_MGMT[WPAv2 PSK]
    2009-04-17 15:59:52 Local7.Info 10.5.15.1 215: Apr 17 19:59:51.969: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0013.e871.5b29 Reason: Sending station has left the BSS
    2009-04-17 16:00:55 Local7.Info 10.5.15.1 216: Apr 17 20:00:54.298: %DOT11-6-ASSOC: Interface Dot11Radio0, Station blackhole 0013.e871.5b29 Associated KEY_MGMT[WPAv2 PSK]
    2009-04-17 17:04:56 Local7.Warning 10.5.15.1 218: Apr 17 21:04:55.640: %DOT11-4-CCMP_REPLAY: AES-CCMP TSC replay was detected on a packet (TSC 0x102313) received from 0013.e871.5b29.
    2009-04-17 17:05:24 Local7.Warning 10.5.15.1 219: Apr 17 21:05:23.570: %DOT11-4-CCMP_REPLAY: AES-CCMP TSC replay was detected on a packet (TSC 0x10C31F) received from 0013.e871.5b29.
    it looks like the clients reconnect 30mins later after, what ever happens.

  • Aironet 1250 AP

    Will the Cisco Aironet 1250 (802.11n) only require an Firmware upgrade after it has been approved for use and gets past draft 2.0? Im thinking of purchasing for testing but want to make sure that being that its in its early stages that the code will only need to be upgraded once the standards have been created.
    Anyone know?
    Thanks!

    Hi Adam,
    Have a look at these answers from Cisco;
    Q. What is the procedure for upgrading radios in the Cisco Aironet 1250 Series Access Points once future technologies become available?
    A. The Cisco Aironet 1250 Series was designed as a modular and upgradable access point platform. When new radio modules become available, the old radio module may easily be removed and replaced in the field.
    Q. Will Cisco guarantee that the Cisco Aironet 1250 Series can be upgraded to support the final 802.11n standard?
    A. Cisco cannot guarantee that the current Cisco Aironet 1250 IEEE 802.11n draft 2.0 standard radio modules can be software-upgraded to support the final 802.11n standard. However, the modularity of the Cisco Aironet 1250 helps ensure that should the final 802.11n standard require a hardware modification, the impact will be limited to just the radio modules, and will not require a change to the access point. The Cisco Aironet 1250 Series radio modules are field-upgradeable and easy to change.
    Investment protection: The Cisco Aironet 1250 Series is a powerful, modular and upgradeable platform that provides support for the IEEE 802.11n draft 2.0 standard today. Platform modularity ensures a smooth migration path to emerging higher-performance wireless technologies and future advanced services.
    From this good Q & A doc;
    http://www.cisco.com/en/US/products/ps6973/products_qanda_item0900aecd806b7c82.shtml
    Hope this helps!
    Rob

  • Aironet 1250, and CAll Manager

    Hii Experts,,
    Dis any one can help me to fine package for aironet 1250 to use it with CiscoWorks LMS 2.5 the device appear as unknown device and I cannot veiw it in Cisco veiw, and if there is a package for call manager 4.2.
    Thanks for you supports.

    CCM is not supported by the LMS.
    Here is the URL for the supported device table for LMS
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.1/device_support/table/lms31sdt.html#Voice

  • Wireless aironet 1250 agn latency issue

    HI , i have cisco wirelss  AIRONET 1250 a/g/n Series.
    when user connect to this wifi  n try to ping any local lan ip then their is ping delay & latency of 2000-3000 ms & packet drop also.
    please check the below configuration  & help me in case of any misconfiguration in the device.
    Building configuration...
    Current configuration : 4384 bytes
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    hostname XXX
    enable secret 5 $1$v308$CW4$GD@#&HDFSDDIF6F0
    no aaa new-model
    dot11 ssid XXX
       authentication open
       guest-mode
    power inline negotiation prestandard source
    crypto pki trustpoint TP-self-signed-1965857182
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-1965857182
    revocation-check none
    rsakeypair TP-self-signed-1965857182
    crypto pki certificate chain TP-self-signed-1965857182
    certificate self-signed 01
      3082024A 308201B3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
      31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
      69666963 6174652D 31393635 38353731 3832301E 170D3032 30333031 30303030
      32385A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
      4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 39363538
      35373138 3230819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
      8100A2C0 8F1CE9DC C0960B16 AFCB867C A83E82EF 13DE3AF0 11D91EF1 B23916A5
      4F3793D0 8DE9FF37 3122C0C3 ACB5D5F0 7A5E340B 92801A4A 079D37D6 9536B912
      2C5F9690 E8252680 8E53B55F 8F08D429 F61751CC 251EDC64 0B9FBB85 41A3C7B9
      4A8DB41A A05BC1A6 48A82E8C 6C3990E1 5EF7FCB4 2E3804A4 76BC8105 AE34BDB7
      15CF0203 010001A3 72307030 0F060355 1D130101 FF040530 030101FF 301D0603
      551D1104 16301482 1242454E 4554544F 4E2D3153 54464C52 2D415030 1F060355
      1D230418 30168014 EE87BD76 491710D6 66CB597F 40D14C5B BD380E5E 301D0603
      551D0E04 160414EE 87BD7649 1710D666 CB597F40 D14C5BBD 380E5E30 0D06092A
    864886F7 0D010104 05000381 81002B48 702D2B54 C3254447 083F0303 23B5D303
      40028EDC DFB13D91 6609B86E B7A128FC 241F1AA4 2AF575CE 631A84FA A10C4B05
      B778DF8B FE6CB872 D7C4EAAF 59BA2104 86DA2A5A 08DDC234 3B4974E4 84746AD8
      032CC895 077CBBA6 CFB4F2B0 C9AA9FBC 9C16E874 4B2399CD 81F0F815 8CEEBB07
      D2A15526 26843037 F8216D96 527A
      quit
    username Cisco password 7 F56GFH45@^$@
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption key 1 size 40bit 7 BE665G23128CFE transmit-key
    encryption mode wep mandatory
    ssid XXXX
    speed  basic-1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
    station-role root
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface Dot11Radio1
    no ip address
    no ip route-cache
    encryption key 1 size 40bit 7 3046778GHN5G4527E9D transmit-key
    encryption mode wep mandatory
    ssid XXXX
    antenna gain 128
    no dfs band block
    speed  basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
    channel dfs
    station-role root
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface GigabitEthernet0
    no ip address
    no ip route-cache
    duplex auto
    speed auto
    bridge-group 1
    no bridge-group 1 source-learning
    bridge-group 1 spanning-disabled
    interface BVI1
    ip address 192.168.1.7 255.255.255.0
    no ip route-cache
    ip default-gateway 192.168.1.3
    ip http server
    ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    snmp-server view dot11view ieee802dot11 included
    snmp-server community public view dot11view RO
    snmp-server location First Floor
    snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
    snmp-server enable traps tty
    snmp-server enable traps entity
    snmp-server enable traps disassociate
    snmp-server enable traps deauthenticate
    snmp-server enable traps authenticate-fail
    snmp-server enable traps dot11-qos
    snmp-server enable traps switch-over
    snmp-server enable traps rogue-ap
    snmp-server enable traps wlan-wep
    snmp-server enable traps config-copy
    snmp-server enable traps config
    snmp-server enable traps syslog
    snmp-server enable traps cpu threshold
    snmp-server enable traps aaa_server
    snmp-server host 192.168.1.10 public
    bridge 1 route ip
    line con 0
    line vty 0 4
    password 7 094F5JG59GBHGA0A
    login
    end
    Waiting for the suggestons ..

    Did you plug antennas on the AP ?
    Can you take a show dot11 assoc all on the AP command line so that we can see the signal strenght ?
    Does this happen only on b/g/n radio or also on a/n radio ?
    Nicolas

  • 11g R2 wont work under windows 2008 R2 doesnt support UTC, and cant change.

    I posted this in error under general, and got no responses. So now Im cutting and pasting it into installation, in a last ditched attemtp to find a way to get a clean installation of oralce on a clean installation of Windows Server 2008 R2 working.
    Problem:
    1) cannt connect to oracle outside of box. Get "TNS Connection timeout occured"
    2) em console "Sepecify Host and Target Database Credentials" always says "Connection refused: connect", even though the OS user/pass and DB user/pass are correct.
    What does work:
    1) I can "select * from dual" using "sqlplus / as sysdba" from the commandline on the box itself.
    2) Once, before I got em console half working, I could connect to the DB from outside the box with SYS as SYSDBA using toad. Now I cant.
    How I installed it:
    1) created a user called "oracle" and put them in the Administrators group.
    2) ran the downloaded installer for enterprise version, partition option chosen, AL32UTF8 char set, global db name: orcl, sid: orcl, "Assert all new security settings on" (No idea what this is) etc.
    3) at the end of the installer it came up with the following error:
    "Set the environment variable ORACLE_UNQNAME to the database unique name"
    3.5) opened up the incomming connections in the windows FW for 1158 and 1521 TCP from all.
    4) set ORACLE_UNQNAME as a system env var for oracle as "orcl"
    5) set ORACLE_HOME to c:\app\oracle\product\11.2.0 (or should this be c:\app\oracle\product\11.2.0\dbhome_1 ??)
    6) set ORACLE_SID to orcl
    7) set ORACLE_HOST to dilbert (the machine name)
    Rebooted.
    8) logged into em console on https:
    dilbert:1158 (works from inside or outside the box).
    9) Entered the oracle windows user userame & pass, and SYS and pass (with connect as SYSDBA). However, it always says "Connectoin refused: connect"
    Im not using a domain. computer name is correctly setup as "dilbert" in the OS.
    I cant think of anything to try, and dont know how to start debugging this problem.
    If I look at the running services, i see:
    OracleDBConsolorcl Stopped
    OracleJobSchedulerORCL Stopped
    OracleMTSRecoveryService Stopped
    OracleOraDb11g_home1CLRAgent stopped
    OracleORADb11g_home1TNSListener Stopped
    OracleServiceORCL Running
    OrclVssWriterORCL Stopped
    nd if i try and start those services as oracle (who is in the Administrators group) it says "The operation could not be completed. Access is denied". If I run task manager as Administrator, I can start all of them except for the TNSListener which doesnt do anything, you say start, and it stays stopped. No errors, now warnings. and the JobSchedulreORCL which says no associated devices.
    HAving manually started some of the services (no idea if you are supposed to do that, cant find any installation documentation which covers before/after running the installer), when I try and specify the host and target database credentials in em console, it says:
    Validation Error
    Please correct the following error:
    dbUserPassword - This field must be specified
    However, the DB password for SYS IS specified and correct - so I have no way to fix this.
    I cant find anyinformatin online where to look for log files, but there is nothing in sysman\log
    Now em console is saying "Conection refused" again, and the following process have killed themselves (as will I soon)
    OracleDBConsolercl Stoppped
    The others which I succeded in starting are still running. So TNSListener nor jobscheduler will start, and Consolerocl kills itself after a minute.
    Well, looks like I'm on my own on this one. Oracle will not intall on windows, and none seems to have noticed. Doing a day of googling reveals that all the log files which are supposed to live in sysman/log do not exist in this installation, so no help there.
    However, I did find an obscure log which says:
    The agentTZRegion value in C:\app\oracle\product\11.2.0\dbhome_1\wario_orcl/sysman/config/emd.properties is not in agreement with what agent thinks it should be.Please verify your environment to make sure that TZ setting has not changed since the last start of the agent.
    The TZ of the windows server is set to "UTC" at long time ago. There is nothing in the oralce windows installation guide to say "Do not use UTC, the most comon server time zone in europe". There is no mention of supported windows timezones.
    Now if Oracle doesnt support basic UTC, then we are all in trouble.
    There are hundreds of articles with this problem and how to solve it on Unix, but almost none for Windows. Do we have to solve Oracle installation bugs ourselves? Is there no support?
    Doing the below reveals that Oracle thinks that UTC is America/Rio_Branco. That HAS to be a bug.
    C:\app\oracle\product\11.2.0\dbhome_1\BIN>emctl config agent getTZ
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
    Unable to open file for logging. C:\app\oracle\product\11.2.0\dbhome_1/wario_orc
    l/sysman/log/emctl.log: Permission denied
    America/Rio_Branco
    So what next?
    The list of "supported" timezones in supportedtzs.list only lists UNIX timezones, and NO UTC!!!!!
    Googling this turns up nothing - noone on the planet seems to use UTC on their servers. I find this absolutely shocking.
    Windows server ONLY users UTC - it doesnt support GMT any more.
    So I have to now randomly try timezones in Windows which I dont want, which will be different from all the other servers in the Datacenter. It means all our reports will be out by 1 hour in summer ifI have to chose a timzeone which has daylight savings, compared with all the other databases which are UTC (not daylight savings).
    I would expect this from freeware maintained by one person in his garage.
    It seems that this Timezone issue emans Oracle will not run on windows.
    Tried a lot of things, including setting the timzeonse in windows to be "(UTC) Dublin, Edinburgh, Lisbon, London", which unfortuantely is not UTC (as it is affected by daylight savings).
    When you run
    "emctl config agent getTZ"
    you get:
    "Europe/London"
    The only oracle documentation I can find on this subject tells you to edit the emd.properties, and modify the agentTZRegion property, which doesnt exist.
    I tried the following command:
    "c:\app\oracle\product\11.2.0\dbhome_1\BIN>emctl resetTZ agent"
    Which tells you to execute:
    SQL> exec mgmt_target.set_agent_tzrgn('wario:3938','Europe/London')
    SQL> commit
    However, when I do this, I get:
    SQL> exec mgmt_target.set_agent_tzrgn('wario:3938','Europe/London')
    BEGIN mgmt_target.set_agent_tzrgn('wario:3938','Europe/London'); END;
    ERROR at line 1:
    ORA-20233: Invalid agent name wario:3938
    ORA-06512: at "SYSMAN.MGMT_TARGET", line 3811
    ORA-06512: at line 1
    Great. Obviosly, Im loggin in as SYS as no other users have been setup, and certainly I have not seen nor created nor set the password for "em repository user".

    I posted this in error under general, and got no responses. So now Im cutting and pasting it into installation, in a last ditched attemtp to find a way to get a clean installation of oralce on a clean installation of Windows Server 2008 R2 working.
    Problem:
    1) cannt connect to oracle outside of box. Get "TNS Connection timeout occured"
    2) em console "Sepecify Host and Target Database Credentials" always says "Connection refused: connect", even though the OS user/pass and DB user/pass are correct.
    What does work:
    1) I can "select * from dual" using "sqlplus / as sysdba" from the commandline on the box itself.
    2) Once, before I got em console half working, I could connect to the DB from outside the box with SYS as SYSDBA using toad. Now I cant.
    How I installed it:
    1) created a user called "oracle" and put them in the Administrators group.
    2) ran the downloaded installer for enterprise version, partition option chosen, AL32UTF8 char set, global db name: orcl, sid: orcl, "Assert all new security settings on" (No idea what this is) etc.
    3) at the end of the installer it came up with the following error:
    "Set the environment variable ORACLE_UNQNAME to the database unique name"
    3.5) opened up the incomming connections in the windows FW for 1158 and 1521 TCP from all.
    4) set ORACLE_UNQNAME as a system env var for oracle as "orcl"
    5) set ORACLE_HOME to c:\app\oracle\product\11.2.0 (or should this be c:\app\oracle\product\11.2.0\dbhome_1 ??)
    6) set ORACLE_SID to orcl
    7) set ORACLE_HOST to dilbert (the machine name)
    Rebooted.
    8) logged into em console on https:
    dilbert:1158 (works from inside or outside the box).
    9) Entered the oracle windows user userame & pass, and SYS and pass (with connect as SYSDBA). However, it always says "Connectoin refused: connect"
    Im not using a domain. computer name is correctly setup as "dilbert" in the OS.
    I cant think of anything to try, and dont know how to start debugging this problem.
    If I look at the running services, i see:
    OracleDBConsolorcl Stopped
    OracleJobSchedulerORCL Stopped
    OracleMTSRecoveryService Stopped
    OracleOraDb11g_home1CLRAgent stopped
    OracleORADb11g_home1TNSListener Stopped
    OracleServiceORCL Running
    OrclVssWriterORCL Stopped
    nd if i try and start those services as oracle (who is in the Administrators group) it says "The operation could not be completed. Access is denied". If I run task manager as Administrator, I can start all of them except for the TNSListener which doesnt do anything, you say start, and it stays stopped. No errors, now warnings. and the JobSchedulreORCL which says no associated devices.
    HAving manually started some of the services (no idea if you are supposed to do that, cant find any installation documentation which covers before/after running the installer), when I try and specify the host and target database credentials in em console, it says:
    Validation Error
    Please correct the following error:
    dbUserPassword - This field must be specified
    However, the DB password for SYS IS specified and correct - so I have no way to fix this.
    I cant find anyinformatin online where to look for log files, but there is nothing in sysman\log
    Now em console is saying "Conection refused" again, and the following process have killed themselves (as will I soon)
    OracleDBConsolercl Stoppped
    The others which I succeded in starting are still running. So TNSListener nor jobscheduler will start, and Consolerocl kills itself after a minute.
    Well, looks like I'm on my own on this one. Oracle will not intall on windows, and none seems to have noticed. Doing a day of googling reveals that all the log files which are supposed to live in sysman/log do not exist in this installation, so no help there.
    However, I did find an obscure log which says:
    The agentTZRegion value in C:\app\oracle\product\11.2.0\dbhome_1\wario_orcl/sysman/config/emd.properties is not in agreement with what agent thinks it should be.Please verify your environment to make sure that TZ setting has not changed since the last start of the agent.
    The TZ of the windows server is set to "UTC" at long time ago. There is nothing in the oralce windows installation guide to say "Do not use UTC, the most comon server time zone in europe". There is no mention of supported windows timezones.
    Now if Oracle doesnt support basic UTC, then we are all in trouble.
    There are hundreds of articles with this problem and how to solve it on Unix, but almost none for Windows. Do we have to solve Oracle installation bugs ourselves? Is there no support?
    Doing the below reveals that Oracle thinks that UTC is America/Rio_Branco. That HAS to be a bug.
    C:\app\oracle\product\11.2.0\dbhome_1\BIN>emctl config agent getTZ
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
    Unable to open file for logging. C:\app\oracle\product\11.2.0\dbhome_1/wario_orc
    l/sysman/log/emctl.log: Permission denied
    America/Rio_Branco
    So what next?
    The list of "supported" timezones in supportedtzs.list only lists UNIX timezones, and NO UTC!!!!!
    Googling this turns up nothing - noone on the planet seems to use UTC on their servers. I find this absolutely shocking.
    Windows server ONLY users UTC - it doesnt support GMT any more.
    So I have to now randomly try timezones in Windows which I dont want, which will be different from all the other servers in the Datacenter. It means all our reports will be out by 1 hour in summer ifI have to chose a timzeone which has daylight savings, compared with all the other databases which are UTC (not daylight savings).
    I would expect this from freeware maintained by one person in his garage.
    It seems that this Timezone issue emans Oracle will not run on windows.
    Tried a lot of things, including setting the timzeonse in windows to be "(UTC) Dublin, Edinburgh, Lisbon, London", which unfortuantely is not UTC (as it is affected by daylight savings).
    When you run
    "emctl config agent getTZ"
    you get:
    "Europe/London"
    The only oracle documentation I can find on this subject tells you to edit the emd.properties, and modify the agentTZRegion property, which doesnt exist.
    I tried the following command:
    "c:\app\oracle\product\11.2.0\dbhome_1\BIN>emctl resetTZ agent"
    Which tells you to execute:
    SQL> exec mgmt_target.set_agent_tzrgn('wario:3938','Europe/London')
    SQL> commit
    However, when I do this, I get:
    SQL> exec mgmt_target.set_agent_tzrgn('wario:3938','Europe/London')
    BEGIN mgmt_target.set_agent_tzrgn('wario:3938','Europe/London'); END;
    ERROR at line 1:
    ORA-20233: Invalid agent name wario:3938
    ORA-06512: at "SYSMAN.MGMT_TARGET", line 3811
    ORA-06512: at line 1
    Great. Obviosly, Im loggin in as SYS as no other users have been setup, and certainly I have not seen nor created nor set the password for "em repository user".

  • I am trying to install final cut pro 6 onto my mac but a message keeps coming up saying its doesnt support a powerpc, anyone have any tips please?

    I am trying to install final cut pro 6 onto my mac but a message keeps coming up saying its doesnt support a powerpc, anyone have any tips please?

    If you have an Intel Mac and have recently upgraded to Lion or Mountain Lion; here is a post I made in another similar thread:
    I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
    Unfortunately you got caught up in the minor miracle of Rosetta.  Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
    However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion).  While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
    Workarounds:
    1. If your Mac will support it, restore OS X Snow Leopard;
    2.  If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between Final Cut Pro or Lion/Mt. Lion;
    3.  Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the screen from your other Mac to view and work FCP in the Mac Mini environment);
    2.  Upgrade to an Intel compatible version of FCP (such as FCP X) and hope it converts your existing projects to its newer format correctly.  There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
    3.  Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
                                  [click on image to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439
    NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
    NOTE 2:  Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

  • Jdk131 of wls 6.1 sp2 on Solaris 7 doesnt support -server option?

    Greetings
    I installed, wls 6.1 sp2 on Solaris 7.
    But it seems the built in jdk131 that installed doesnt support
    -server option.
    i checked the jdk131/jre/bin folder, but i dont see any client, server folders...how
    is this possible?
    how to correct this?

    Yes i tried that, but it says, incorrect option, JVM could not be created.
    any was i cd identify is the install binary was correct?
    like any indication in jdk131/jre/bin folder?
    Kumar Allamraju <[email protected]> wrote:
    i think it does.
    Have you tried to start with java -server weblogic.Server?
    Are you getting any errors?
    Kumar
    vinay wrote:
    Greetings
    I installed, wls 6.1 sp2 on Solaris 7.
    But it seems the built in jdk131 that installed doesnt support
    -server option.
    i checked the jdk131/jre/bin folder, but i dont see any client, serverfolders...how
    is this possible?
    how to correct this?

  • Unable to Connect to Cicso Aironet 1250

    My office just bought the Cisco Aironet 1250 and I am task to set it up. Right now, I am unable to connect to AP even when it is configured as Open Authentication without encryption. Tried using both laptops and our products to no avail. The same laptops and products are able to connect to other wireless routers So far, only my Linksys Wireless-G USB network Adapter is able to detect it.
    We are very puzzled by this because we are able to setup and connect to it initially. But when we try to reconfigure it to another setting, everything starts to fail. We have tried doing factory default.
    The AP is connect only to a Windows 2003 Server running DHCP and IAS. Appreciate if someone can help me on this. Thanks

    Hi All,
    Here are screen capture of my configuration
    http://img.photobucket.com/albums/v146/tiger3687/Cisco%20AP%201250/ExpressSetup.jpg
    http://img.photobucket.com/albums/v146/tiger3687/Cisco%20AP%201250/Security-EncryptionManager.jpg
    http://img.photobucket.com/albums/v146/tiger3687/Cisco%20AP%201250/Security-EncryptionManager.jpg
    http://img.photobucket.com/albums/v146/tiger3687/Cisco%20AP%201250/Security-SSIDManager02.jpg
    http://img.photobucket.com/albums/v146/tiger3687/Cisco%20AP%201250/Security-SSIDManager03.jpg
    http://img.photobucket.com/albums/v146/tiger3687/Cisco%20AP%201250/Security-SSIDManager03.jpg
    http://img.photobucket.com/albums/v146/tiger3687/Cisco%20AP%201250/Security-SSIDManager03.jpg
    http://img.photobucket.com/albums/v146/tiger3687/Cisco%20AP%201250/Security-ServerManager.jpg

  • What does this Adobe Muse error message mean: MuseJSAssert: Error calling slector function:SecurityError: Failed to read the 'contentDocument' property from 'HTMLIFrameElement': Blocked a frame with orign "null" from accessing a cross-origin frame.

    So what is up with this error message in Muse?
    MuseJSAssert: Error calling slector function:SecurityError: Failed to read the ‘contentDocument’ property from ‘HTMLIFrameElement’: Blocked a frame with orign “null” from accessing a cross-origin frame.

    This is a genuine security error generated by the browser when viewing a page with iFrame content locally.
    Please refer to Zak's reply in the following thread: https://forums.adobe.com/message/6496180#6496180
    Cheers,
    Vikas

  • Cisco Aironet 1250 - How to bridge two AP's and get Non-root to talk to Root AP

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin-top:0in;
    mso-para-margin-right:0in;
    mso-para-margin-bottom:10.0pt;
    mso-para-margin-left:0in;
    line-height:115%;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:Arial;
    mso-bidi-theme-font:minor-bidi;}
          I have two buidlings acroos the street from each other.  I have two Cisco Aironet 1250 wireless AP's with the first one going in the main building with network backbone.  The Second AP goes across the street with the other wired network segment.  Both AP's have long range antenas 2.4 GHZ on top of each building.  I have configured the 1st one as the Root Bridge.  The one across the street is configured as non-root bridge.  I have both AP's configured with the same WEP key and also with the same SSID name with both set to broadcast it.   I am still unsure and confused as to how I get the non-root bridge to talk to and use the root bridge to get on the main network.
            1- It’s main to use the Root parent Mac address.
            2-  Is there another config that I am missing to get the signal? 
    Note: I still not getting any signal from the root although distance between root and non-root is 330m
    My root antenna is AIR-ANT24120 and non-root antenna is AIR-ANT1949 and attached files is my configuration files
    Thank you.

    1.  How are the AIR-ANT24120 and the AIR-ANT1949 installed?
    the AIR-ANT24120 is connected virtically on tower far 11m from the earth and AIR-ANT1949 is connected horizontally on tower far 10m from the earth
    2.  What is the distance between both APs?
    350 m
    3.  Do you have clear line-of-sight between the two?
    there is one tanker in the middle between them but it's far 7m from the earth
    4.  Is the two APs properly aligned?
    i think yes and changed the aligned many times without any news (I don't have any tools for alignment)
    5.  Which point are the antennas connected to?  Primary, Secondary or middle?
    I tried in the primary and secondary but never tried the middle antenna
    Thanks

  • My computer doesnt support desktop software 6.1

    the problem is my computer doesnt support the latest desktop software version 6.1 but supports other versions. 
    i just got my phone. and i want to download version 6.0.1 but somehow i cant seem to be able to find the link to downlaod it. the site only allows me to download the latest one. does anyone know where i can download that particular version? 

    take a look here please
    http://us.blackberry.com/apps-software/desktop/system_requirements.jsp#tab_tab_6.0
    There is also 6.0.2
    Push like button if it worked
    Thx
    --- Catalonia, next state in Europe ----
    Use the "solved" or "Like" icons if my answer helped you.
    BES10 administrator for several customers.
    "SMPTE Calculator" timecode APP developer for BB10

Maybe you are looking for

  • "Fast Web View" not supported in Acrobat X plug-in for FireFox/Chrome

    The Acrobat X plug-in for displaying PDFs in FireFox/Chrome does NOT support fast web view.   This means that PDFs don't display until after the entire file has been download. For example, try viewing this document in either IE(Windows) or Safari(Mac

  • How to wait for a variable to be set?

    Hi, I need to wait for a variable to be set. I tried this, but it didn't work (IllegalMonitorStateException). How to do it? Thanks! public class MyClass {   private Boolean succed = null;   public static boolean doStuff() {     MyClass my = new MyCla

  • Broken bookmark cross references in Printed Documentation

    Hi, I'am using RH 10 to generate a printed documentation output. What i notice is that the book marked cross references are broken in the Printed Documentation output. Other cross references are linking fine, but, the bookmarked cross references do n

  • Magic Mouse on Iphone 3GS

    Hi, Has anybody got a magic mouse working on their iphone?

  • Export to Excel facility in Visual composer

    Hi Expert, I am using NW 7.0 .Want to develop a Visual Composer iView based on RFC function module to fetch the data from backend and publish in portal. In that iView I want to give the Export to PDF option for the corresponding SAP data. I am referr