Aironet 1300 - problems with security

Hi,
I have two Aironets setup as below. They both have the radio configured and up. I suspect the issue is with the security. I am unfamiliar with how it works - if anyone can provide me any pointers, it would be much appreciated!
thanks,
Mark
dot11 vlan-name BRIDGE1 vlan 153
dot11 vlan-name BRIDGE2 vlan 254
dot11 vlan-name BRIDGE3 vlan 154
dot11 ssid BRIDGE1
vlan 153
dot11 ssid BRIDGE2
vlan 254
authentication open
authentication key-management wpa
infrastructure-ssid
wpa-psk ascii 7 <key here>
dot11 ssid BRIDGE3
vlan 154
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption key 3 size 128bit 7 <key here> transmit-key
encryption mode ciphers wep128
encryption vlan 254 mode ciphers tkip
ssid BRIDGE1
ssid BRIDGE2
ssid BRIDGE3
speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 b
asic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
station-role root bridge
cca 75
concatenation
infrastructure-client
interface Dot11Radio0.153
encapsulation dot1Q 153
no ip route-cache
bridge-group 153
interface Dot11Radio0.154
encapsulation dot1Q 154
no ip route-cache
bridge-group 154
interface Dot11Radio0.254
encapsulation dot1Q 254 native
no ip route-cache
bridge-group 1
interface FastEthernet0
no ip address
no ip route-cache
interface FastEthernet0.153
encapsulation dot1Q 153
no ip route-cache
bridge-group 153
interface FastEthernet0.154
encapsulation dot1Q 154
no ip route-cache
bridge-group 154
interface FastEthernet0.254
encapsulation dot1Q 254 native
no ip route-cache
bridge-group 1
interface BVI1
ip address 10.0.254.203 255.255.255.0
no ip route-cache

Hi Vincent,
Firstly, if you've got a MAC address access list to restrict access, just confirm you've got the right MAC address in there - in my testing it caused exactly the error you've indicated.
The other things to try are:
Remote end is not powered up
Antennas are misaligned
Channels do not match
Radios are switched off
Radio power is set too low
Speed not matched
Authentication failing
Check this link for authentication debugging:
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_tech_note09186a008024aa4f.shtml
These commands may help:
debug dot11 aaa authenticator mac-authen
debug dot11 aaa authenticator all
thanks,
Mark

Similar Messages

I gotta problem with security question recovery email I'd, mistakenly I entered wrong email I'd so now I want to edit that I'd plz help me

I gotta problem with security question recovery email I'd, mistakenly I entered wrong email I'd so now I want to edit that I'd plz help me

expresslane.apple.com to get a hold of itunes to reset them by email the only way

HT5312 Problem with security question

I have Problem with security question

The Best Alternatives for Security Questions and Rescue Mail
     1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

HT5699 Having problem with security question

Cannot get iTunes card to work having problem with security question

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

Hello I have a problem with security questions and i cant reset to my email The error was   Exceeded Maximum Attempts We apologize, but we were unable to verify your account information with the answers you provided to our security questions. You have

Hello
I have a problem with security questions and i cant reset to my email
The error was
Exceeded Maximum Attempts
We apologize, but we were unable to verify your account information with the answers you provided to our security questions.
You have made too many attempts to answer these questions. So, for security reasons, you will not be able to reset password for the next eight hours.
Click here      for assistance.
i waited more than eight hours. and back to my account but it is the same ( no change ) i cant find forgot your answers
http://www.traidnt.net/vb/attachment...134863-333.jpg
can you help me please

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

TS1702 Having problems with Security questions to be able to download from the iTunes store

Having problems with Security questions to be able to download from the iTunes store

Security questions
Read this note for information on how to reset the security questions http://support.apple.com/kb/HT5312
This user tip may also help you Security Questions

HT201363 hello,I have a problem with security questions.i don't remember the answer. can you help me please

hello,I have a problem with security questions.i don't remember the answer,please help me. i don't know how to manage this

You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(104775)

I'm facing problem with security questions,

I'm facing problem with security questions,
please hlep me to solve it.

http://support.apple.com/kb/HT5665

Problem with security in Weblogic 8.1

Hi, my name is Jesús Chávez Reyes and it is my first time in this forum.
My problem is related with security in WL 8.1 because I am new in this matter. My problem is :
I work in change completely the security of an enterprise application that is deployed in WebLogic 8.1 and your security is a based in a RDBMS Custom Realm in Compatibility Security.
This application is composed by 18 EJB and 4 web applications.
The objective of this change is:
1.- Use a external system for authentication (though a web service).
2.- If is possible: unbind security of WL for in a future deploy the application in other Server(Jboss for example).
I'm trying to implement security with Acegi and Spring in a one of the four web applications. I deleted all it has to do with security in deploy descriptors and deleted the realm.
At this point I can login in , using the Web Service of the external application, without difficulty.
The problem arises when the application makes an instance of the EJB's. This is the way how the application makes the instances of the EJB:
InitialContext context = new InitialContext( null );
Object = context.lookup(name); // name=GroupSessionFacade (JNDI Name of EJB)
EJBHome home = (EJBHome) objref;
+...+
GroupSessionFacadeHome home = (GroupSessionFacadeHome) objref;
groupFacade = home.create();
In this point GroupSessionFacadeHome home = (GroupSessionFacadeHome) objref the application throws ClassCastException. This happens with all EJB.
The application work fine before of to use Acegi and remove all it has to do with security. I inspect the Object " objref " before and after and this happen:
BEFORE
Class Name: control.ejb.GroupSessionFacadek1696tHomeImpl
SuperClass : weblogic.ejb20.internal.StatelessEJBHome
Implement : weblogic.ejb20.internal.StatelessEJBHome , control.ejb.GroupSessionFacadeHome
AFTER
Class Name: control.ejb.GroupSessionFacadek1696tHomeImpl
SuperClass : weblogic.ejb20.internal.StatelessEJBHome
Implement : weblogic.ejb20.internal.StatelessEJBHome
Here The object no implements the InterfaceHome "control.ejb.GroupSessionFacadeHome" !!!!!!!!!, this is the cause of ClassCastException.
What is the problem? Is it a security problem? and if so what do I need to remove or add in the application and has no dependence on anything for the security of Web Logic?
The deploy descriptors are:
IN THE WEB APPLICATION
web.xml
+<ejb-ref>+
+<description>Reference to the GroupSessionFacade</description>+
+<ejb-ref-name>ejb/GroupSessionFacade</ejb-ref-name>+
+<ejb-ref-type>Session</ejb-ref-type>+
+<home>control.ejb.GroupSessionFacadeHome</home>+
+<remote>control.ejb.GroupSessionFacade</remote>+
+</ejb-ref>+
IN THE EJB
ejb-jar.xml
+<?xml version="1.0"?>+
+<!DOCTYPE ejb-jar PUBLIC '-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN' 'http://java.sun.com/dtd/ejb-jar20.dtd'>+
+<ejb-jar>+
+<enterprise-beans>+
+<session>+
+<description>GroupSessionFacade</description>+
+<ejb-name>GroupSessionFacade</ejb-name>+
+<home>control.ejb.GroupSessionFacadeHome</home>+
+<remote>control.ejb.GroupSessionFacade</remote>+
+<ejb-class>control.ejb.GroupSessionFacadeEJB</ejb-class>+
+<session-type>Stateless</session-type>+
+<transaction-type>Container</transaction-type>+
+<ejb-ref>+
+<ejb-ref-name>ejb/UserManager</ejb-ref-name>+
+<ejb-ref-type>Session</ejb-ref-type>+
+<home>control.ejb.UserManagerHome</home>+
+<remote>control.ejb.UserManager</remote>+
+</ejb-ref>+
+<resource-ref>+
+....+
+ </enterprise-beans>+
+<assembly-descriptor>+
+<container-transaction>+
+<method>+
+<ejb-name>GroupSessionFacade</ejb-name>+
+<method-name>*</method-name>+
+</method>+
+<trans-attribute>NotSupported</trans-attribute>+
+</container-transaction>+
+</assembly-descriptor>+
+</ejb-jar>+
weblogic-ejb-jar.xml
+<?xml version="1.0"?>+
+<!DOCTYPE weblogic-ejb-jar PUBLIC+
+"-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB//EN"+
+"http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd">+
+<weblogic-ejb-jar>+
+<weblogic-enterprise-bean>+
+<ejb-name>GroupSessionFacade</ejb-name>+
+<transaction-descriptor>+
+<trans-timeout-seconds>600</trans-timeout-seconds>+
+</transaction-descriptor>+
+...+
+<enable-call-by-reference>True</enable-call-by-reference>+
+<jndi-name>GroupSessionFacade</jndi-name>+
+</weblogic-enterprise-bean>+
+</weblogic-ejb-jar>+

Hi,
This is the forum to discuss questions and feedback for Microsoft Visio, I'll move your question to the SSIS forum
http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlintegrationservices
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support

Why does my latest version of Firefox under Windows 8.1 always report problems with security certifactes - even on mozilla,com - when my latets version on Ubunt

On my desktop, I have been using Firefox V27 on Ubuntu 12.04 for some time. It uses secure sites - such as https://mozilla.org - and accepts the Security Certificates quite happily, so I am not even aware there is any issue.
My new laptop is Windows 8,1, and I have installed Firefox- the latest version.
Whenever Firefox visits a secure site, it ALWAYS says that there is a problem with the security certificate - even at mozilla.org - and warns me away. I have to complete a security exemption.
Why is this, and how can I fix it?
Thanks in anticipation.

unfortunately the fiddler2 issuer in certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
 reference: https://support.mozilla.org/en-US/questions/982532#answer-520145
afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]

I am facing lots of problems with security while using Mozilla. How can I send you a detailed report for this?

I am getting redirected to unknown sites whenever I open any site while using mozilla. Initially I thought that there is a problem with my device, but then I realized that this happens only when using mozilla, not with other browsers like chrome, IE, or opera.
These sites are mainly having the message 'Ad by ShopDrop'..
I am pasting below links to few sites to which I get redirected to
http://offers.bycontext.com/scjs/tb/ctxjs/index.php?kw2=www.espncricinfo.com&affid=1151&subaff_id=725_724&intformat=roll&nextpage=http%3A%2F%2Fwww.espncricinfo.com%2F&ch=421&sbrand=ShopDrop&folder=v4.19&typrd=ctx&cu=32929&country=IN&original_country=IN
http://add0n.com/fastest-gmail.html?v=0.1.6&p=0.1.5&type=upgrade

hello, you have various malicious addons present. please perform all these steps:
# [[Reset Firefox – easily fix most problems|reset firefox]] (this will keep your bookmarks and passwords)
# afterwards go to the firefox menu ≡ > addons > extensions and in case there are still extensions listed there, disable them.
# finally run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] to make sure that adware isn't present in other places of your system as well.
[[Troubleshoot Firefox issues caused by malware]]

Any Problems With Security Update 2006-002

Hi a few weeks ago I updated my PowerBook G4 running Mac OS 10.3.9 to Apple Security Update 2006-001 and instantly my Dock Meny dissappeared after installation and Safari broke. My Dock Menu returned after installation but Safari remained broken.
In the end I simply reinstalled Mac OS X Panther from scratch, recreated my user account and copied my data (I had it saved) back to my Mac.
I don't want to run the risk of something like this happening again. I do not have Apple Security Update 2006-001 installed at this time but I do have Apple Security Updates from 2005 installed and 10.3.9 on my system.
If I install Apple Security Update 2006-002 on my Mac (will be updating from 2005 security updates) - not updating 2006-001 to 2006-002 but installing first 2006 Security Update for the first time could I run into any problems?
Want to hear from other users who have installed this update - have updated from 2006-001 and preferrably anyone who is installing this update directly (not over 2006-001) before updating myself.

Ive got some serious problems with 2006-001 (and they wernt cured by installing 2006-002).
Photoshop and flash mx stopped working and I am unable to reinstall either!
Ive deleted all prefs, caches, everything associated with these apps.
Ive tried installing different versions of both apps - but to no avail.
Ive repaired disk permissions (even in single user mode) - and while that did straighten out a few incorrect permissions and uid's it did'nt fix my problems.
Totally at the end of my tether now, and getting impatient with Apple - this is my livelyhood and I cant afford to have downtime!
The "broken webkit" fiasco at the back end of last year was bad enough, but this just takes the p*!
Not happy - but hopeful that someone has a fix (preferably one that doesn't involve archive and restore)....

Problems with Security Update 2006-002

Hi there,
I have problems with latest security update. I do not know what went wrong, but after installing "Security Update 2006-002 (PowerPC)" (1.0) on 2006-03-14 15:52:40 +0100: with Software Update from Tiger, my desktop (and probably not only desktop) is damaged.
The most visible thing is that all .html and .htm documents on my desktop does not have Safari icon anymore, they have some 'blank' icon and doubleclick on them DOES NOT start-up Safari, why?
See here on the screenshot: http://www.jirkacech.com/files/Tiger-problemy-screeshot.png
note blank "apple - start.webarchive" also the Safari itself have somehow damaged icon, to same blank thing with triangle, possibly some 'generic app' or 'default.app' icon. It sits in the dock on 5th from left...(dont worry about real safari icon, that's newly added by me)
Also, on, second screenshot, http://www.jirkacech.com/files/Tiger-problemy-2.png you see that safari itself have some strange icon.
I am getting crazy, since I do not know what else is broken by last update.
I have tryed to repair permissions at least 3x, and also run update_prebindings and reboot, delete all system and user caches, and reboot.
Whole issue is system-wide, not only for one user.
iBook G4 Mac OS X (10.4.5) 1.33 GHz, 512 MB, 12-inch

The first thing you can try, if this is limited only to Safari icons, is to select on such icon, then press COMMAND-I to open the Get Info window. In the Open With section select Safari from the dropdown menu as the default app. Then click on the Change All button.
If this doesn't resolve the problem or if the problem extends to other appicons as well, then you may have some disk corruption resulting from not repairing the hard drive and permissions before doing the update. I suggest you do that:
Boot from your Tiger DVD. After the installer loads select Disk Utility from the Utilities menu. After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Having some problems with security certificates

Hello,
In some pages, e.g. Twitter, and pages that load FB comments sections, I'm having problems with the certificates and the pages won't load. I don't get an option to add an exception either, therefore I cannot access pages.
I have pasted the error details below. Here is some important info for you:
Version: 9.0.1 <-- Upgrading is NOT an option, this is a corporate machine
Connect via proxy: yes
I doubt very much that this is an issue with the connection, as IE and Chrome are NOT having this issue on the same connection.
Error I get:
This Connection is Untrusted
You have asked Firefox to connect securely to twitter.com, but we can't confirm that your connection is secure.
Normally, when you try to connect securely, sites will present trusted identification to prove that you are going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
Technical Details
twitter.com uses an invalid security certificate.
The certificate is not trusted because the issuer certificate is not trusted.
(Error code: sec_error_untrusted_issuer)
Can anyone shed some light? The usual troubleshooting I've come across hasn't helped me much.

Off the cuff it smells of a man-in-the-middle situation to me. As far as I know, Twitter does have a valid certificate, signed by Verisign. That IE and Chrome have no problem with it, could just mean they do not check resp. do let you know.
I'll have to pass here, because I would not know, how to turn this checking off in FX 9.0 - in any case I would think twice before doing it. The place to look would be Options > advanced > Encryption.
Hope somebody else joins us:)
PS: keeping you nailed down to Fx 9.0 version is unsafe - not just for you, but for your company as well.

Migrate users problem with security answers

Hi,
we are trying to mograte users from an old IDM system to a new one,
we want to export/import the user list, but we have a problem with the security answers since they are encrypted and we don't know the best way to move them.
could you please help? the old IDM is v 6 and new one is 8.1 (already running with customizations and different user set)
Thanks

the easiest way:
1. export/import the encryption keys in the new installation.
2. export/import the q/a policies, orgs, and make sure your maintain their exact same object IDs.
3. export/import users , and make sure their answers' IDs match whatever exist in the new installation.

Aironet 1300 - problems with security

Similar Messages

Maybe you are looking for