Aironet 350 and palm m500 w/bluetooth card installed

Does anyone have any documentation/tech info on how to setup the Aironet 350 to support Bluetooth?

Please refer to the link for the doc-
https://books.google.co.in/books?id=5x7T7eTyAdQC&pg=PA262&lpg=PA262&dq=how+to+setup+the+Aironet+350+to+support+Bluetooth&source=bl&ots=YQmkn3aJ80&sig=g3fobt-AIZmasjDCHZzRQCetemA&hl=en&sa=X&ei=4yG3VNraJYaWuASJ3IHYCA&ved=0CCsQ6AEwAg#v=onepage&q=how%20to%20setup%20the%20Aironet%20350%20to%20support%20Bluetooth&f=false

Similar Messages

Palm and Pocket PCs with bluetooth cards

Has anyone had any experience of using LabVIEW 7.1 PDA with Pocket PCs or Palms fitted with a bluetooth card?
Most Palms I've come across e.g. the Tungsten series are bluetooth enabled internally, so is it a case that LabVIEW can only see the internal BT device when the native BT vis in LabVIEW are being used to create apps?
Similarly, I've used the same BT VIs for Pocket PC 2003 devices with BT hardware already inside (specifically Ipaq H2210,which ran faultlessly) but I am unsure whether a Pocket PC running 2003 with say a CF card can be utilised using those same BT comms VIs (same goes for a Palm with OS5 and a Bluetooth SD card)?
Cheers

Hello Bill,
I've used the tdk go blue usb adapter hooked up to a PC and have been able to communicate bi-directionally with it using an Ipaq 2210 pocket pc. I'm waiting for the bluetooth card for my Palm 515 so I can replicate this functionality.
The TDK uses the Cambridge Radio chipset which is also used by other dongles, such as the D-Link DBT-120 and these work with the XP service pack 1 generic bleutooth drivers (Q328183 I think), also SP2 and hence LabVIEW. If you are intending to use the TDK, you don't need to load up the suite as long as you have these drivers. (The TDK blu2i development kit incidentally has these drivers on the CD, but not sure if the dongle alone comes with these).
If you do have the driv
ers its just a case of using the high level Vis for both PDA and PC to communicate with each other as client and server.
If the PDA is the client you would set up this using the Open Connection VI and serial service UUID eg:
00001101-0000-1000-8000-00805f9b34fb
For the PC you'd make this the server and use the create listener VI with the above UUID then carry out a Wait on Listener function, and as soon as the other device comes into range you should be in business.
You can also use standard serial comms if you have a virtual port set up for the dongle, but timing can then become an issue. The native bluetooth VIs in LabVIEW take care of all that, and you don't need to set up a serial port in "My Bluetooth Places", as you effectively use the UUID which creates the serial port service you require.
Hope this helps but please drop a line if you have any more questions.
Cheers

Problem when trying to sync with Palm Centro phone and Palm m500

I just purchased a Palm Centro phone and have had no problem when I try to sync the phone with the Palm software on the computer, however, my wife has an older Palm m500 and all her contacts are on her Palm, but they don't show up on the Palm Desktop software. Is there something we're doing wrong? All the dates show up on her desk top and everything in my phone shows up on my desktop, only her contacts are empty.
Post relates to: Centro (Verizon)

It is likely that your wife's older device (with Legacy two-word PIMs) is incompatible with the Access Desktop/Hotsync for Verizon Centros as I believe it has only the new Extended (one-word) PIM conduits. If you are running XP you might be able to use a download of 4.1.4e. Suggest you search the Hotsync forum to see if the Centro can use this version of Hotsync (I don't have a Centro).
Post relates to: Palm TX

Windows 7 and Palm m500

I have read other messages on this board, but I still cannot get my m500 series Palm to sync with my 64-bit version of Windows 7. I have tried using XP mode, but my device was not recognized under the USB option on the virtual desktop toolbar. Same problem with the Aceeca drivers - my device was never recognized. I use a crade/cable set up to sync the Palm to the computer. Any ideas???
Post relates to: Palm m500

There are others using the m500 with the Aceeca driver. I need more details on your problem. What desktop version are you attempting to use. Have you attempted to use more than one version of the palm desktop and not done a clean uninstall of the previous versions. Here is an example of what should transpire while installing the Aceeca file if you already had the palm desktop 4.1.4 installed.
1: Download the Aceeca driver and unzipp it.
2: Turn on and hook up your device to the computer.
3: Go to the device manager and look for palm, there should be some kind of yellow symbol next to it. This will only happen if your m500 is hooked up and powered on.
4: At this point you right click on palm and update driver, choose browse for and find the Aceeca driver and select and install it.
5: When it installs it will show up in device manager as ACEECA Handheld Device.
I have no idea what is going on unless you tell me and you may have none all of this or not. Be persistent with this problem. Most people have success on the first try others not. If you have the Aceeca driver installed and are using palm desktop 6.2.2 you may be able to hotsync but none of the info will show up. In this case you will need another free app to get the 6.2.2 to communicate with your legacy device. So give us more info and more detail.

F2 AND F3 BUTTON BRIGHTNESS+BLUETOOTH+CARD READER DRIVER ISSUE(window7)

hello i am using HP Pavilion G6 2311.My f2 and f3 button to adjust brightness is not working.as i just installed
window 7(32bit).And i already check in bios funaction key it is enabled.i guess its a driver issue.
second problem is bluetooth problem how to use laptop bluetooth.also its driver issue.
thirdly and lastly card reader driver issue also
please help to fix it and
the link to download trusted DRIVERS.
Thankyou

Hi:
Try this driver.
If this driver doesn't work, and you want to run W7, then you will have to install W7 64 bit, for which there are graphics drivers.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_125680_1#tab1

Wrt54Gv5 and Palm T3/Palmone Wifi card

I finally decided to upgrade my router and bought the wrt54gv5. When I connected it yesterday, I found that I couldn't access it via LELA, but I did configure it manually. Today I've updated the firmware to the latest release and now can access it via LELA!
Anyway, my Palm reports no signal if I try to connect to the router in Infrastructure mode. In Ad-hoc mode, it connects fine and gets a random IP address and can't access the net (as one would expect).
As the Palm is my only wifi device, I don't know if the problem is with the Palm or the router. Any suggestions, other than buying a dongle for the laptop so it can also talk wifi?

yes, and double checked the keys on the two devices match. Also set up MAC screening and configured the router to only accept keyed devices.
The Palm only supports WEP, so any additional security is good! Turned off SES as well.

Yoga 13 SDXC Card Shutsdown Computer and it cannot restart with card installed

Hi,
I have read on the forum that people are using the SDXC cards with their Yoga 13's.
I have purchased a Sandisk 64Gb SDXC ExtremePro card but when I put it into the Card Reader a blue screen comes up saying " Your PC ran into a problem and needs to restart." It also gives and error with this message saying: PAGE_FAULT_IN_NONPAGED_AREA (TosExt.Sys). It cannot restart again until I remove the card, the same thing happens in SAFE MODE also or if I try to start the computer with the card inserted already. The card is brand new and I bought it in a reputable shop. I have tested the card in a Lenovo ThinkPad X230 and it works fine. I have also tried to insert a different standard SD card into the Yoga but the same thing happens. I have reinstalled the driver for the reader but the problem still remains. The OS is Windows 8 64 bit. The card is in ex FAT format and I re-formatted it again just to be safe but still no luck.
I was not able to find anything regarding this online but saw that some people here have similar problems.
I would really appreciate if someone could help or at least let me know if there is a way of contacting Lenovo about this problem, I see that they will only accept emails regarding the ThinkPad product line.
Thank you in advance and best regards to all!

I have also problems while inserting a sdcard but not on a Lenovo. I just give here what I observed but I have no direct solution
1. I bought last year a Samsung chronos and it was impossible to put a sd card. Each time I get the blue screen with the message page_fault_in_non_paged_area (tosExt.sys). When I contacted Samsung they of course do not understand and suggest that I reinitilize completely the computer which I did. At this moment it was possible to insert a sd card without problem but as soon as I have installed my usual sotfwares it came back to the same situation : impossible to put a sd card.
2. I bought meanwhile a second computer, an Asus Zen book, and got exactly the same problem. Both computer are operated under windows 8 but the upgrade 8.1 does not change anything.
3. the only way I can read a sd card in both these computers is to use a USB adaptor. In this case there is no problem.
4. I recently bought a Yoga pro 2 from Lenovo. Surprinsingly with the same kind of sofware installed, I can use directly a sd card.
This seems to be a tricky problem

How can I creat virtual channel and traditional devices while my card installed,I can not do?

I installed PCI-6220 card,and I also installed DAQmx and Traditional DAQ in my computer,
but I cannot creat virtual channel at the last step(attachment:TDAQ6220.jpg).
Maybe this is the reason I didn't creat traditional NI-DAQ Device,but I can not creat it.
(see attachment: DAQ Device.jpg,there is no PCI-6220 on list).
What's wrong?What shall I do?
Junwei You

Hello Rainer,
You can see this attachment(6024E.jpg),the 6024E card appears on Traditional NI-DAQ Devices,
but I don't know how can it be created(I don't creat it,we buy the whole system together with the machine).
I tried create a new traditional Device(I want to confirm 6024E), but still I can not see any NI-DAQ device in traditional NI-DAQ device
lists. See the 'Create New....' interface.How can do it?
Thanks!
Attachments:
6024E.JPG ‏128 KB

Fans Running Fast And Loud With Kona LHe Card Installed?

Hi,
I have a Power Mac G5 Quad, and it makes noise with fan kicking on after it goes to the sleep mode? I took all the 3rd hardware off it, memory, drives and etc. The LHe Kona I have installed and when my quad is put on the "sleep" mode the fans kick on?, but when I move my mouse it stops? Anyone of you guy have this problem?
Thank you Tim C.
I posted this in Power Mac Disscusion too.

Hi
Cool thank for the info, now I know I am not alone, hmmm tried taking out all the hardware added hardware too, made it stop, as I tested each area, drive, memory, Kona card, etc, just going to bite the bullet, dont know what else to do, contacted support, no answers hmmm T.

Using Sitecom CN-504 Bluetooth card with PB Pismo and OS 10.4.6

I have been given a Sitecom CN-504 Bluetooth card and was trying to use it with my PB G3 Pismo which is running OS 10.4.6
The card claims to be Mac compatible and has instructions for use with OS 10.1.4 which requires the use of Apple Bluetooth Preview v 2.1 and shows the use of a Bluetooth preference pane in System Preferences. I have been to the Sitecom website and there are no Mac driver downloads - the manual seems to imply that it should just work with OS 10.1 or later and since the Apple Bluetooth .pkg will not install on OS 10.4.6 it would seem that Bluetooth support is already built in ?
After I boot with the Bluetooth card installed , I have no Bluetooth pane in system preferences although it is in the library - I cannot see how to 'activate' this pane or to move it into the system preferences window ?
I looked in the Apple System profiler and there was no information found under the 'Bluetooth' heading although the card shows up under PC and PCI cards.
Has anyone here successfully installed Bluetooth in a Pismo before , and if so , under which operating system ?
If this card is not compatible , has anyone successfully used a different Bluetooth adaptor with the Pismo or any G3 Powerbook ?
If I get it working I would like to be able to link to my Palm Bluetooth GPS receiver and use it with Route 66 or some similar mapping application which offers GPS support ( I currently use TomTom Navigator 5 with my PalmOne Treo 650 but find the small screen a disadvantage at times ).

3Com Bluetooth PC Card
This is the only PC Card (PCMCIA) which works on the Mac. I do not know how Sitecom can state Mac OS X comptibility. This cannot be true. I recommend to got either for the 3Com which disappears completely or the D-Link DBT-120 USB adapter.
Do you have the Apple Bluetooth Preview 2.1 installer on your disk? I really, really would love to get that installer (again) because I lost it. Could you please send it to me? My e-mail address is on the website above.

I use a 2003 FW800 MDD desktop, with dual 1.25 GHz processors, and OS10.4.11, and with native Bluetooth card, won't recognize a newer Bluetooth Headphone set as an Input or Output device in System Preferences

I use a Mac 2003 FW800 MDD desktop with dual 1.25 GHz processors, 2 GB memory, and a native Bluetooth card installed. I use OS10.4.11. The FW800 was the only MDD that could use Bluetooth natively, as an optional installation. I use the installed Bluetooth to run an Apple Aluminum Keyboard, and would like to use it with a new (2010) Samsung SBH-600 Bluetooth Headphone set, but, although the set will pair with the computer, and is recognized in both the System Profiler, and the Bluetooth section of System Preferences, it is not recognized in the Sound preferences section of System Preferences as either an Input or Output device. Only the installed external Apple speakers are recognized. I'd like to know if there is anything that can be done to make the Bluetooth system installed work with these headphones - either something that can be changed in the computer settings, or an added external Bluetooth device with different Bluetooth capabilities.

It it may be that you are running either an outdated BT software or the firmware of the card is not up to date.
What version is your BT software? Is it later than 1.5?
http://support.apple.com/kb/DL1209
Firmware:
http://support.apple.com/kb/DL354
Along with the firmware, it is likely that the headphones require a later BT revision than you are running. The headphones need rev.2.
You may need to move to Leopard for support.
http://support.apple.com/kb/DL889
It also may be that headphone support is limited to iChat or the like in Tiger.....
If you go to a USB BT dongle, D-Link often gets the nod as having native compatibility in OS X.

Bluetooth card not detected

Hi all,
Good day
I have HP pavilion dv6000 special edition entertainment notebook, at the back it shows dv6700. Originally it came with Windows Vista installed, I upgraded to Windows 7 32-bit Home edition and is working fine.
After rigourous search I still do not know if it has Bluetooth or not. So finally I purchased and installed a bluetooth card in the laptop but it is not being detected upon boot. I tried all the bluetooth drivers from HP website but all came with message of not finding the bluetooth.
Will this laptop at all not take bluetooth card? or needs any other process of installation that I need to do?
Thanks
Ad

Hi Vidya,
Thanks for your reply, here are the details:
1) My Laptop: HP Pavilion dv6000 Entertainment PC, Special Edition. On the back of the laptop its written: HP Pavilion dv6700, P/n: KT260AV. It was with Windows Vista pre-installed, I installed the current Windows 7 Home edition 3years back and is working fine.
2) About Bluetooth card: Installed it on board, its Broadcom, number: BCM92045NMD, connected to laptop on-board connector.
Regards
Ad

"No airport card installed" only in swedish mode?

Hi all, got this problem with my Macbook pro!
Recently when I was reconfiguring my wifi-network (assigning my time capsule as main router and the modem I got from my ISP as a "bridge"), I noticed that my airport card was acting strange.
The problem is that it says "No airport card installed", but I still got internet connection and can surf/download stuff without a problem. Also, when I go into "System preferences/Network" I can see my airport connection and turn it on/off. Although when I click "Advanced" nothing happens.
I've tried several things but none seems to work, and I'm not sure its an hardware issue. Anyway, this is what I've tried:
1. Rebooting (several times) = Didn't work
2. Resetting PRAM and NVRAM = Didn't work
3. SMC-reset = Didn't work
4. Rebooting into Windows XP via bootcamp = Airport card detected and working just fine
5. Restoring older save via time capsule = Didn't work
6. Format and reinstall Snow leopard and restore older save via time capsule = Didn't work
7. Format and reinstall Snow leopard (again) = Didn't work...-ish?
Now, here's the strange bit. As I log in to a new account with english as main language I notice that the wifi-icon on the top dashboard now is filled (it was greyed out and only said "No airport card installed [in swedish ofc]) and I can now click it, change network and all that stuff. Although, when I go to "System preferences/Language & text" and change my preferred language to swedish and log out & in, the same problem occurs (greyed out wifi-logo, no airport card installed etc.)
So, I'm totally confused. Halp?

Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If that doesn't help Reinstall the OS.
If that doesn't do it, the card has likely died.

IOS 7 "No Sim Card Installed"

I just downloaded iOS 7 yesterday and ever since then I randomly keep getting "No Sim Card Installed" messeges. I've never had this problem until I installed the new iOS. Is anyone else having this problem? If so do you know how to fix it?

me too.
Obviously this is a software bug with iOS 7, as I never had the issue until the upgrade.
Now my phone is becoming useless for incoming calls and texts, since every few hours, I look at my phone and it says "No Sim card installed". I have to power down and back up to fix it.
Very bad bug - Apple, going to fix this ASAP?

"No Airport Card Installed".... It was yesterday!

One day I'm wireless, the next day I'm not. Is it possible ( I'm sure it is) to fry your aiport card? It has completely disappeared. I did a search and it said "No Airport card installed" Is there a way I can get my mac to recognize it? Or do I need to install a new one? Thanks in advance for any advice someone may have.

As others in this thread have experienced my card is found one day and not found the next. It took 4 restarts to "find" it this morning. This is getting very frustrating. I have checked the card to make sure it has not come loose. I have shut down and restarted the base station and cable modem with no effect. I agree that it must be a software problem. I will be searching the Mac sites today for any answers. Has anyone else seen this problem mentioned anywhere other than these boards?

Aironet 350 and palm m500 w/bluetooth card installed

Similar Messages

Maybe you are looking for