Aironet 3602i not working with SAP (NetWeaver) client

Heres the scenario.
Wireless client connected to a 3602i AP running on 2500 series WLC with a latest 7.2 code.
Client will now connect to AT&T vpn client - success.
Client will connect to SAP application using netweaver gui - failed.
With the same scenario, except for the access point being used, client will connect to SAP application using netweaver gui
1242AP IOS/CAPWAP - success
1252 CAPWAP - success
3500 CAPWAP - success
Whats with the 3600 series APs that i cant pass traffic with the SAP application?
Troubleshooting done:
802.11n disabled - still failed
Clean Air disabled - still failed
MFP disabled - still failed
Any other solutions?
Sent from Cisco Technical Support iPhone App

Hi Amjad,
You are correct, same config, same WLC, one port is connected in 2500 WLC.
Here's the process for working SAP application
1. Client will connect to 1242/3500 wireless AP - success
2. Client will connect to AT&T Global Network Client (VPN Client) - success
3. Client will connect to SAP Logon (SAP Netweaver) - SAP GUI for Windows - success (see attached sap success logo)
Here is for not working SAP application
1. Client will connect to 1242/3500 wireless AP - success
2. Client will connect to AT&T Global Network Client (VPN Client) - success
3. Client will connect to SAP Logon (SAP Netweaver) - SAP GUI for Windows - failed (hangs on the logo), waited for 10mins but still stuck in this logo, i have to disconnect the VPN to terminate the connection to SAP

Similar Messages

SAP PI FTP sender adapter not working with SAP ECC over Itanium

Hi,
We have been running normally SAP PI 7.0 SP14 with no issue for a while.
We are now in the process of migrate the SAP ECC system from PA risc to IA platform. We are performing some tests between SAP PI and SAP ECC to check that the platform migration is not affecting us in any way and we have found that FTP adapter sender is not working anymore (receiver is working as usual).
We place some files in the new ECC system and when PI goes to retreive the files it is like it can not read anything. It gives no error but it does not pick any file. This is not happening with the old platform.
Does anyone have any idea?
Thanks a lot for your help
Diana

Hi,
I am using FTP connection and for the receiver it is working fine.
Thanks
Diana

ODBC and OCI not working with OBIEE 11g Client on 64 bit machine

Hi,
I have Installed OBIEE 11g client (Admin tool) on Windows XP Professional 64 bit machine.. I have Installed 11g database on the same machine but while importing Metadata using admin tool. getting "Connection has failed" error message... Can someone tell me whats the issue..
ODBC and OCI works fine with OBIEE 10g Admin..

Hi,
Oracle_BI1\network\admin folder gets installed with full obiee 11g Installlation and I have installed only 11g client as I have OBIEE 10g already Installed on my machine..
Installation is as follows:
ORACLE 11g CLIENT Installation is as follows:
C:\Program Files\Oracle Business Intelligence Enterprise Edition Plus Client
ORACLE 10g Installation is as follows:
C Drive:
ORACLE BI
ORACLE BI Data ( everything is working with this)
latest Log Info is as follows:
[2012-02-02T11:05:00.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 24fc] [nQSError: 16001] ODBC error state: 08004 code: 12154 message: [Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified.
[2012-02-02T11:05:16.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 2f3c] [nQSError: 16001] ODBC error state: 08004 code: 12154 message: [Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified.
[2012-02-02T11:32:53.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: ] [tid: 2f3c] [nQSError: 16001] ODBC error state: 08004 code: 12154 message: [Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified.

SAP GUI not working with SAP* and DDIC default passwords

Hi SAP Guru's ,
at last I installed the SAP ECC6.0 on Windows 2003 (stand alone) with Oracle 10G database.
I installed the SAP GUI , when I am trying to loging from SAP GUI clients 000 and 001 with SAP* and DDIC user accounts I am naot able to login . please give me the how to configure this .
thanks in advance
Edited by: srinivas kaveti on Apr 4, 2008 9:16 PM

Hi Srinivas,
You should set "login/no_automatic_user_sapstar=0", in the SAP profile. With ECC 6.0, default sapstar user deactivated. You can take a look at OSS note #68048, for detailed information.
Best regards,
Orkun Gedik

Working with SAP NetWeaver 7.0 (BI)

Hi!
I already have read SAP courses BW305 and BW310 and went through [SAP BW example |http://help.sap.com/saphelp_nw04s/helpdata/en/46/8df2e4ebf268e5e10000000a1553f7/frameset.htm]
I have a SAP NetWeaver 7.0 system and SAP ERP IDES 6.0 with example data (order, materials).
Now I would like to continue to gain practical experience.
What could the next step?
Of great interest for me are:
u2022     a case study/example where I can load and analyze data from SAP ERP IDES ECC 6.0 (materials or orders) into SAP NetWeaver 7.0
u2022     a case study in area BW based consolidation
What is the prerequisite to use BW based consolidation (e.g. tcode ucpp)?
u2022     other practical topics
u2022     how can I download this [DEMO content |http://help.sap.com/saphelp_nw04/helpdata/en/67/f3013872af2946e10000009b38f8cf/frameset.htm ] ?
Any helpful information/SDN blogs, etc. will be very appreciated!
Thank you very much!
Thom

Hi!
Thank you!
How can I download the DEMO content? What is the appropriate URL and SWDC-path therefore?
Other question:
I have in my SAP NetWeaver system SAP BW component but no BI CONT 7.03?
Do I need to install a appropriate add on BI CONT 7.03?
On service market place there are a lot of BI contents.
Which one do I need?
SAP NW 7.0 BI CONT ADDON 7.04
SAP BI Cont 7.03
Thank you very much!
regards
Thom
Edited by: Thom Heinemann on Dec 16, 2008 12:36 PM

Windows 8.1 DPI scaling does not work with Windows 7 client ?

I have a Surface Pro with Windows 8.1 and a PC with Win7 SP1 both fully updated including optional updates (RDP8.1 client for Win7, verified in about box).
Still, when I connect to my Surface from my PC everything is enlarged.
My PC has two monitors: primary 1920x1080 and secondary 1680x1050. I've tried opening connection on each one of them as well as on both (multi monitor). I've also attempted to use windowed mode with lower resolutions.
Surface is set to default DPI settings (slider moved to Larger and "Let me choose one scaling" is unchecked). Also, when I'm connected via RDP I cannot move the slider ("Some display settings can't be changed from a remote session") though
I can click "Let me choose..." but that requires a sign-out. Another oddity is that my remote desktop client does not have a "Smart sizing" window menu item.

Hi,
When you are within a session you should be able to check the option Let me choose one scaling level for all displays, change the scaling, sign out, then when you reconnect it will have the new dpi setting applied. This is the expected method for a
Windows 7 client.
-TP

IE Integrated authentication not working with Windows 2003 clients

Hi,
I have a website on a windows 2008 R2 server on IIS. It is accessible through the Windows 7/windows 2008 internet explorers with integrated authentication. when the same user logged in a windows 2003 server and try to open this site, popping up the username/password
prompt. Even if giving the right username/pw, it doesnt accept.
IE integrated authentication is enabled in the client. Is there any restriction in windows 2003/xp clients to use integrated authentication on a site published in IIS7 over a windows 2008?
Thanks for any help.

This may help
http://forums.iis.net/t/1167697.aspx?Making+Windows+Authentication+work+on+IIS7+it+worked+on+IIS6
Generally www.iis.net is a good place for solving similar task and problems.
Regards
Milos

Why CUA (Release 7.00) is Not Working with Old Clients(Release 4.6C, 4.5B)?

Hi all,
We have CUA (release 7.00) that is not working with older release clients. I implemented 2 release 7.00 clients to CUA; they both work fine. However, when I implement some older release clients (like, 4.5B, 4.6C, 6.20 and 6.40) to CUA, I can only create ID and pull out to client, but roles do not go through.
It is kind of argent.
Do anyone know how to fix it????
Thank you for reading this.

> It is kind of argent.
I think you meant "ardent"...
THe word u r g e n t is blocked by our content filters, because a while back everything was like that and these forums are actually discussion forums...
Anyway, sounds like faulty config or perhaps a problem with logical system assignment.
Have you checked that? Also check in SCUL?
That you can create users but not assign roles might also be that in the lower release systems they are checking activity 22 (assighn) AND 02 (change) to assign the role. Doesn't make sense, really....
Check the drop down menu in table PRGN_CUST for the option to change this, and compare whether the settings are different.
Cheers,
Julius
Edited by: Julius Bussche on Jul 30, 2009 11:34 PM

SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP stack only

SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP Stack
Dear Portal Gurus,
we want to integrate SAP BW Bex Queries 7.3 into an Enterprise Portal 7.3 EP ABAP Stack only installation.
1) We have Done SSO between EP And BI System
2) System Object is Created
3) When we trying to create Iview of BEX 7.3 report, its executing that report on BI server, we don't have java stack on BI System
4) We have updated the required table in Bi system for executing the report on EP
5) RFC is OK, System Object Test is OK, Report is working independently from Business Explorer, but not working from EP
There no irj services available on BI system, as it is only ABAP stack.
Can anybody help us in achieving our requirement
Thanks in advance
Michael Wecker

Hi Michael,
To integrate portal with BI you need to perform BI Portal integration steps.
Refer to a document link below for guidance purpose.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?overridelayout=t…
Ensure that you have performed all these relevant steps.
Hope this helps.
Regards,
Deepak Kori

Cisco Aironet FW 15.2 Does not work with Non-Cisco Media Bridges

I have a Cisco Aironet 1142i that was just updated from 12.4(23c)JY to 15.2(4)JA1 (don’t think model matters as the issue seem to be the firmware) and now I cannot get my media bridges (3 different ones) to either connect to the 1142 AP or obtain and pass the DHCP addresses to other device connected to the built in switch. If I reload the 1142 AP firmware to 12.4, than this works fine. I have not seen anything in the release notes that changed how this works or if there is I could not find it.
Does anyone know why this changed and if there is any settings that I need to enabled / disable?
Any help on this would be greatly appreciated

More info to add to this.
AIR-AP1142N-A-K9 Hardware Version of v06 works with firmware 15.2.
AIR-AP1142N-A-K9 Hardware Version v05 does not work with firmware 15.2, but will when downgraded to firmware 12.4.
I'm also having this issue with Cisco Aironet 3602 Fw 15.2(2)JB and 3502 Fw 15.2(2)JB$ that's on a Cisco 2500 WLAN Controller Sw Ver. 7.4.100.0.
Any help on this would be greatly appreciated

Best practices of integration with SAP Netweaver

Hi All,
I'm totally new to SAP Netweaver but I have a task to integrate our system with SAP ECC (R/3). We are using SAP Netweaver 6.4. The goal of integration is to provide for user list of available modules (Sales and Distribution, Human Resource, Payroll, etc) and when user selected for example Payroll we need to display list of available BAPIs. In general weare able to create Enterprise Web Service for some BAPI and consume it. But the problem is that everytime when administrator changed BAPI process (for example added new field to Business Object) we need to regenerate wsdl and change our client application. Does Netweaver provide some Web Service which can retrieve list of applications, list of BAPI processes and can retrieve meta data of some BAPI? Something like Partner Web Service interface?
We are looking for best practices of integration with SAP Netweaver. We are trying to develop something like adapter which will be able to pull data into SAP ECC system is there any generic way to develop this adapter?
Thanks in advance for your help.
Yura.

Hi Yura !!
As far as I know, this is not possible yet. Using SAP Netweaver XI/PI, although it adds value to the webservice scenario exposing BAPI functionality, it also needs to maintain a refreshed version of the BAPI definition in its repository. Depeding the complexity of the change in the BAPI structure, maybe PI may allow you to continue working without changes.
Maybe a good practice is not to make too much changes to a production BAPI, instead make a review in development environment, and once it is stable, use it in production. Other good practice is to keep older versions of BAPIs and add the changed ones as new versions to have back-compatibility
Regards,
Matias.

How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
Galyna

Hi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1)      Go to System Administration
2)      Go to System Configuration
3)      Go to Portal Content (Right Side Panel), open that folder.
4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6)      Choose next
7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8)      Open the Newly Created System.
9)      Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b)      Logical System Name - Give the logical name as defined in the backend system
c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a)      ITS Description à Give some Description
b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
      default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a)      Web AS Description -> Give some Description
b)      Web AS Host Name - same as ITS Host Name
c)      Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13)   Select "User Management" property, now fill the required fields like
a)      Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b)      Logon Method - Select UIDPW.
c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23)   Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K.

Best Practice to start with SAP NetWeaver BI (BW) to become a BI consultant

Hi there,
I have one Question. As consultant for SAP NetWeaver Portal (Development/Java), I would like to start with SAP NetWeaver BI (System Configuration, Customizing and Development with ABAP/ABAP OO) through e-learning and/or with (e)books.
A system for making practice is available.
Can someone give me a helpful guide how to start and become a BI Consultant for system administration and development within the next 12 months?
Some Questions I have noticed are:
1) The system (application) environment of BI (what is integrated in it - e. g. within the portal, there is a storage for unstructured information like documents or virtual rooms for collaboration between departments - and what does it make)
2) How does development in BI works (development environment, coding, debugging, building, deployment and test) and what is used stronger (ABAP or ABAP OO)? Here, I don't mean how to write ABAP or ABAP OO programs, only the infrastructure from development to transport to a target system
3) How is a BI system to configure as default after installation?
4) Good guides (e/books) to learn ABAP and ABAP OO (as far as possible oriented on the practive)
Of course, these are only a few Question and far from complete. Details and other important points will be appreciated.
Many thanks,
Cengiz

Hi,
1) The system (application) environment of BI (what is integrated in it - e. g. within the portal, there is a storage for unstructured information like documents or virtual rooms for collaboration between departments - and what does it make)
Document management from RSA1 transaction of BI helps to attach any unstructured documents at specific level in BI.
2) How does development in BI works (development environment, coding, debugging, building, deployment and test) and what is used stronger (ABAP or ABAP OO)? Here, I don't mean how to write ABAP or ABAP OO programs, only the infrastructure from development to transport to a target system
BI has got a separate tool and GUI to perform all the Extract, Transform and load related activities. ABAP is part of BI but you don't need much extensive ABAP learning. Basic ABAP is sufficient to write routines and extractors.
3) How is a BI system to configure as default after installation?
May be a BASIS person can help you out here about the configuration but this is not the job of BI person.
4) Good guides (e/books) to learn ABAP and ABAP OO (as far as possible oriented on the practive)
You can search for SAM Series learn ABAP in 24 days book. This book is sufficient to learn the ABAP required for working in BI.
But except ABAP you will have to completly learn the BI system to work efficiently.
Regards,
Durgesh.

What contents we can include under JAVA with SAP NetWeaver 7.0?

hi friends,
i want to know about JAVA with SAP NetWeaver 7.0.
whether it covers only java programming or java-WebDynpro,portal and many more?
can somebody give details on this?
i have worked on java-WebDynpro,portal.is that enough to get certification on JAVA with SAP NetWeaver 7.0-Associate C_JAVA_70?
please provide me details.
thanks
Nutan.

Hi Rajesh,
I cleared this certification last year. Go through the syllabus mentioned. In our time there were 13 different sections e.g NWDI, EJBs, WD etc which had multiple choice qs and u need to click on the radio button for that.
How to prepare.
Go through the topics and course books mentioned in the syllabus well. U should be clear with all the basics especially EJBs and NWDI, lot many qs asked from these. WedDynpro qs are basically easy.if u dnt have books chk sdn and help site fot the topics.Qs chk your understanding of the content. They come from syllabus but are not direct and multiple choice make it difficult to answer.
How to answer the questions.
Chk every option in case of mutiple choice. Mark only those options which u are full confident and den if more than 50% confident bcoz we heard there were -ve markings although not sure how they calculated marks.
Is any sample test program is there?
There are no sample test program for this.
All D Best for the certification.
Regards
Priyanka

Information how Ariba works with SAP

Hi All,
I searched in WEB but could not find enough information how Ariba helps to work with SAP.
Can you please help me to understand how Ariba works in procurement, sales and financial accounting with SAP.
Regards,
Prakash

Dear
The followings are from SDK online help. FYI
SAP Business One SDK enables partners and customer to extend and change the functionality of SAP Business One to create industry specific functionality, develop missing functionality, and interfaces with 3rd party tools.
The SAP Business One SDK consists of:
SAP Business One Data Interface API (DI API)
A collection of COM objects called business objects. These objects describe various methods for updating, retrieving, and manipulating data in the SAP Business One database.
SAP Business One User Interface API (UI API)
A collection of DCOM objects that provide access to forms, controls within these forms, and menus. DCOM (distributed component object model) is a standard interface for object communication in distributed applications.
DI Server
A COM service running on a server that enables multiple clients to access and manipulate SAP Business One company database, using SOAP version 1.1 messages.
DI Java Connector
An interface to DI API objects from Java. With Java Connector, you can conveniently get or set properties and invoke methods of the DI API objects with Java-bean-style code.
best regards,
xiaodan an

Aironet 3602i not working with SAP (NetWeaver) client

Similar Messages

Maybe you are looking for