Aironet client utility load new firmware 59% Error Writting to Flash Memory

always receive this error
Error Writting to Flash Memory in 59%
Thursday August 07 2008 17:34:30
Start test
`The radio's registry keys are OK.
C:\WINDOWS\system32\drivers\PCX504.SYS File Size: 124416
The radio driver has been installed.
TEST 2:
The second step is to check the radio insertion.
The radio has been inserted.
TEST 3:
The third step is to check if the radio is turned on.
Your radio is turned on.
Current Active Profile Name: Unknown Vendor
Auto Profile Selection is not enabled.
TEST 4:
The fourth step is to check your client adapter's association to an access point.
---------->Association Status: No receive packets
Checking driver/firmware capabilities
PROBLEM: Firmware version is too old.
POSSIBLE REPAIR: Download new firmware to the radio
or replace the radio.
any help :(

please any help?

Similar Messages

Unable to load new filter, get error message

Hello. I have been using Pixel Bender for several months without a problem. I am running CS5 64bit. Today, I tried to add a new filter skinColorFilter and I get an error that NewFilter already exists and cannot be added. I looked in the Pixel Bender Files folder and no such filter exists. This is a link to the screen image of the error I am getting; .
I am able to continue and use all the other filters and do see a NewFilter listed but have no idea where it came from. Any ideas what I can do to resolve this problem...........Ralph

Hello, and thank you for responding. The problem is that there is no NewFilter in the Pixel Bender directory and in fact there is no such file in my entire disk. My first reaction was to delete the filter but couldn't do so as it didn't exist. I have since downloaded other filters that work fine so have decided to give up and live without the skinColorFilter.
Again, thank you for your suggestion.............Ralph

Losing network connection when loading new firmware from iTunes (or syncing

Noticed this when loading 1.1.1 weeks ago and now 1.1.2. Several times during the download/installation process, I lost my network connection. Rebooting the PC restored it, only to have it go down again, requiring another reboot. Required several PC (not iPhone) reboots to be able to complete the process. This happens only during this process -- I otherwise never lose my network connection and always enjoy super speed. Paid it no mind and dismissed as a fluke during 1.1.1 upload, but was surprised to see it again this time. In both cases the final download and install worked perfectly. It's just a time-consuming hassle -- kinda weird -- thx much in advance for any clues about this...

It appears the problem appears only when using torrent software.
There is a lot of discussion on different torrent software forums about this, and directions on how to get around this issue. However with my skills I only managed to get Vuze to work properly while killing the network access from all other application. So i just went back to default settings.
I give up for now, I'll wait until Apple releases OS X update that works together with these programs (like it did in tiger and earlier versions..) or if it's even possible, one of the programs finds a way to get around this issue.

Cisco Aironet 1310 flash memory test

Dear Cisco Support Community
i have a problem on one of my 1310 wireless bridge it is stucked on flash memory test and after resetting the baudrate to 115200
all i see on the bridge is status and Ethernet Leds are blinking green.
Can you please help me?

LED Indications
During access point operation the LEDs provide status information as shown in Table 5-1.
Table 5-1 LED Signals
Message
type
Ethernet
LED
Status
LED
Radio
LED
Meaning
Boot loader status
Green
Green
DRAM memory test.
Amber
Red
Board initialization test
Blinking green
Blinking green
Flash memory test.
Amber
Green
Ethernet initialization test.
Green
Green
Green
Starting Cisco IOS.
Association status
Green
At least one wireless client device is associated with the unit.
Blinking green
No client devices are associated; check the unit's SSID and WEP settings.
Operating status
Green
Blinking green
Transmitting/receiving radio packets.
Green
Ethernet link is operational.
Blinking green
Transmitting/receiving Ethernet packets.
Boot loader errors
Red
Red
DRAM memory test failure.
Red
Red
File system failure.
Red
Red
Ethernet failure during image recovery.
Amber
Green
Amber
Boot environment error.
Red
Green
Red
No Cisco IOS image file.
Amber
Amber
Amber
Boot failure.
Operation errors
Green
Blinking amber
Maximum retries or buffer full occurred on the radio.
Blinking amber
Transmit/receive Ethernet errors.
Blinking amber
General warning.
Configuration reset
Amber
Resetting the configuration options to factory defaults.
Failure
Red
Red
Red
Firmware failure; try disconnecting and reconnecting unit power.
Firmware upgrade
Red
Loading new firmware image.
Controller status
Alternating green, red, and amber1
Connecting to the controller. Note If the access point remains in this mode for more than five minutes, the access point is unable to find the controller. Ensure a DHCP server is available or that controller information is configured on the access point.
Message
type
Ethernet
LED
Status
LED
Radio
LED
Meaning
1 This status indication has the highest priority and overrides other status indications.

CompactRIO unusual error status LED flashing continuously

Hi,
I have a cRIO 9014 controller with an error i can't solve.
After re-installing LV 8.5 on my laptop MAX could see the controller but with the VISA and NI-RIO error. I wanted to obtain the IP address from the DHCP server (before i used the static IP address without any problems), rebooted the controller and the status LED started flashing continuously every 1 second. (unrecoverable error or corrupted flash memory card)
I rebooted the controller several times with IP reset but LED is still flashing. Also in MAX i can't see the controller anymore so reformatting controller is not possible.
Firewall is off, crossover cable is connected, IP of host is ok but no cRIO in MAX
Found a similar problem on the forum http://forums.ni.com/ni/board/message?board.id=170&message.id=238333&query.id=24781#M238333 but it didn't solve my problem unfortunately.
Thanks for your help!
Greetings from the Netherlands

Hello TrabW,
Thank you for your post on our webforum.
Can you try to start up the controller in safe mode? Is it possible to ping the controller? Please try the default IP address and the one you entered (in case the controller didn't reset the IP). Please let me know the results,
Best regards,
Martijn S
Applications Engineer
NI Netherlands

New firmware with unexpected errors

I just downloaded the new firmware for Airport Extreme and Airport Express. I woke up this morning, and the network would not recognize one of my Express base stations. I went to the Apple store and bought two new AirPort Express units. In each case, with the old unit and the two new units, all I get from the AirPort Utility is "An unexpected error occurred. Try again." Any thoughts, anyone?

I had this problem too. This may not work for you, but after a couple of hours of frustration, I tried doing a hard reset without the ethernet cable plugged in. I was then able to setup the device and plug the ethernet back in after it all worked.

Getting an error FRM-92150:WEB client version too new.........

Hi ,
I am getting an FRM-92150:WEB client version too new...
I have cleared all cache Jar files in control Panel. But I am getting same Error......
Please tell me a better solution to resolve the issue....
Thanks in Advance.

hi
try something like this i hope it helps u.
Set the proper ORACLE_HOME / bin in the beginning of the system path.
The CODEBASE entry in your HTML file or forms configuration file may point The CODEBASE entry in your HTML file or forms configuration file may point
to older versions of the JAR file.. Either modify the codebase entry in your
configuration file or replace the jar file in the codebase path with the appropriate jar configuration file.
sarah

Forms9i error FRM-92150: Web Client version too new.

Hello everybody,
I have just installed 9iDS on Win. XP Prof.
When I try to run a form from the builder, I get the above error(FRM-92150: Web Client version too new). I am hoping someone from Oracle will respond to this posting.
My laptop is a spanking new Dell Inspiron 1100 with 384MB Ram.

Hi,
did you run a newer Forms version before? The error message indicates that the Forms Server version doesn't match the generic set of Java classes forming the generic Java Applet. On Windows 2000 (client) the Oracle Java classes are stored in "Documents and Settings", <user>, Oracle Jar cache. Delete all cached jar files and try again (close the Nrowser before). This should download a new set of Java classes from teh Server. If the problem still shows, make sure that the f90all_...jars are not from a newer release than the software itself.
Fran

When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, even jpeg files. This is a NEW frustration.

When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, evne jpeg files. This is a NEW frustration.

Nikon raw files would open up in Adobe Camera Raw and so should jpegs.
If you select one in Bridge and give the command "Ctrl r" (Windows), what happens?
Also what is the version of ACR in the title bar?
Gene
Note: unmark your question as "answered". the green balloon next to the subject shows it as "solved".

"Failed to load excel file" an Error Message while running TDS upgrade util

Dear All,
"Failed to load excel file" an Error Message while running TDS upgrade utility when clicking on CHECK DATA.
Please help me out on this!!!!!!!!!!!!
Thanks..........

Not all data can be exported to Excel easily. Especially if the query result is huge or there are special characters in the query results. You may try the most updated version.
Thanks,
Gordon

Firmware Failure Error & Run chkdsk Utility

Hi We have 2 ipod nanos and we kinda have the same 2 problems with each.....We go into itunes make a play list, the ipod is connected, and it tries to update a pop up box appears and tells us there is an error and to write the chkdsk utility. Then to try and fix this we are supposed to download the latest update but can't do that either because when we click on restore an error box pops up saying firmware disk error - how can this be fixed as we have 2 ipods unable to be used. We are using Windows XP & have broadband connection (if that is of use) We have read replies to this problem before but we can't fix it...

Welcome to Apple Discussions!
I think are lost as to the structure of how Apple Discussions works.
Go back to where it says Discussions, and pick up:
Windows Compatible Technology's section, iPod, and post there.
This is the Mac OS X Mail & Address Book forum.
Someone here may still be able to answer your question, but it is usually best if you post in a section where people are known to have the same setup as the one you are having an issue with.

Problems Loading new ATA firmware

Hi,
I have a CUCM Version 7.0.2
In the Device Defaults I had ATA030203SCCP051201A for Cisco ATA 186.
I loaded ATA030100SCCP040211A.zup into CCM.
In the device phone I changed the "Phone Load Name" to ATA030100SCCP040211A or ATA030100SCCP040211A.zup, saved and reset the device, but the ATA cannot get this new firmware.
I am doing something wrong? Am I missing something?
Best Regards.
Elio Fernandes

Hi Elio,
Please note the ATA filetype required for CUCM 7.x***
Depending on which version of Cisco Unified Communications Manager you are running, download the following:
â¢***For Cisco Unified CallManager release 5.1 and later, you need:
cmterm-ata-sccp.3-2-4.cop.sgn
â¢For Cisco Unified CallManager releases 4.1, 4.2, and 4.3, you need:
ata_03_02_04_sccp_090202_a.zip
http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/3_2_4/english/release/notes/atarn324.html
Hope this helps!
Rob

Coherence Extend Config:   Client create a new Cluster

Hi,
I have configured one storage-enabled coherence node and one proxy server on port 9099 as shown in the wiki. Coherence client is configured with the right -Dtangosol.coherence.cacheconfig which points to the xml file with
+     +<remote-cache-scheme>++
++               <scheme-name>extend-dist</scheme-name>++
++               <service-name>ExtendTcpCacheService</service-name>++
++               <initiator-config>++
++                    <tcp-initiator>++
++                         <remote-addresses>++
++                              <socket-address>++
++                                   <address>Proxy_IP</address>++
++                                   <port>9099</port>++
++                              </socket-address>++
++                         </remote-addresses>++
++                         <connect-timeout>10s</connect-timeout>++
++                    </tcp-initiator>++
++                    <outgoing-message-handler>++
++                         <heartbeat-interval>5s</heartbeat-interval>++
++                         <heartbeat-timeout>4s</heartbeat-timeout>++
++                         <request-timeout>50s</request-timeout>++
++                    </outgoing-message-handler>++
++               </initiator-config>++
++          </remote-cache-scheme>++
My Client logs shows that it has created a new cluster and then it loaded the Dtangosol.coherence.cacheconfig xml file. Is there a way to prevent my client starting a new cluster? Is configuration incorrect? Any help will be greatly appreciated :)
Client Log:
======
2011-02-10 04:39:37.599/0.599 Oracle Coherence 3.6.0.1 <Info> (thread=main, member=n/a): Loaded operational configuration from "jar:file:/usr/share/java/coherence-3.6.0.1.jar!/tangosol-coherence.xml"
2011-02-10 04:39:37.606/0.606 Oracle Coherence 3.6.0.1 <Info> (thread=main, member=n/a): Loaded operational overrides from "jar:file:/usr/share/java/coherence-3.6.0.1.jar!/tangosol-coherence-override-dev.xml"
2011-02-10 04:39:37.606/0.606 Oracle Coherence 3.6.0.1 <D5> (thread=main, member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified
2011-02-10 04:39:37.615/0.615 Oracle Coherence 3.6.0.1 <D5> (thread=main, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
Oracle Coherence Version 3.6.0.1 Build 17846
Grid Edition: Development mode
Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved.
2011-02-10 04:39:38.112/1.112 Oracle Coherence GE 3.6.0.1 <D4> (thread=main, member=n/a): TCMP bound to /172.23.73.236:8088 using SystemSocketProvider
2011-02-10 04:39:38.432/1.432 Oracle Coherence GE 3.6.0.1 <Info> (thread=Cluster, member=n/a): This Member(Id=3, Timestamp=2011-02-10 04:39:38.236, Address=172.23.73.236:8088, MachineId=62188, Location=site:lss.emc.com,machine:lglor236,process:5631, Role=ApacheCommonsDaemonDaemonLoader, Edition=Grid Edition, Mode=Development, CpuCount=4, SocketCount=4) joined cluster "*cluster:0xC4DB" with senior Member(Id=2, Timestamp=2011-02-10* 04:33:09.003, Address=172.23.73.236:8090, MachineId=62188, Location=site:lss.emc.com,machine:lglor236,process:4193, Role=ApacheCommonsDaemonDaemonLoader, Edition=Grid Edition, Mode=Development, CpuCount=4, SocketCount=4)
2011-02-10 04:39:38.439/1.439 Oracle Coherence GE 3.6.0.1 <D5> (thread=Cluster, member=n/a): Member 2 joined Service Cluster with senior member 2
2011-02-10 04:39:38.440/1.440 Oracle Coherence GE 3.6.0.1 <D5> (thread=Cluster, member=n/a): Member 2 joined Service Management with senior member 2
2011-02-10 04:39:38.440/1.440 Oracle Coherence GE 3.6.0.1 <D5> (thread=Cluster, member=n/a): Member 2 joined Service DistributedCache with senior member 2
2011-02-10 04:39:38.442/1.442 Oracle Coherence GE 3.6.0.1 <Info> (thread=main, member=n/a): Started cluster Name=cluster:0xC4DB
Group{Address=224.3.6.0, Port=36000, TTL=4}
MasterMemberSet
ThisMember=Member(Id=3, Timestamp=2011-02-10 04:39:38.236, Address=172.23.73.236:8088, MachineId=62188, Location=site:lss.emc.com,machine:lglor236,process:5631, Role=ApacheCommonsDaemonDaemonLoader)
OldestMember=Member(Id=2, Timestamp=2011-02-10 04:33:09.003, Address=172.23.73.236:8090, MachineId=62188, Location=site:lss.emc.com,machine:lglor236,process:4193, Role=ApacheCommonsDaemonDaemonLoader)
ActualMemberSet=MemberSet(Size=2, BitSetCount=2
Member(Id=2, Timestamp=2011-02-10 04:33:09.003, Address=172.23.73.236:8090, MachineId=62188, Location=site:lss.emc.com,machine:lglor236,process:4193, Role=ApacheCommonsDaemonDaemonLoader)
Member(Id=3, Timestamp=2011-02-10 04:39:38.236, Address=172.23.73.236:8088, MachineId=62188, Location=site:lss.emc.com,machine:lglor236,process:5631, Role=ApacheCommonsDaemonDaemonLoader)
RecycleMillis=1200000
RecycleSet=MemberSet(Size=0, BitSetCount=0
TcpRing{Connections=[2]}
IpMonitor{AddressListSize=0}
2011-02-10 04:39:38.477/1.477 Oracle Coherence GE 3.6.0.1 <D5> (thread=Invocation:Management, member=3): Service Management joined the cluster with senior service member 2
Feb 10, 2011 4:39:38 AM org.springframework.context.support.AbstractApplicationContext prepareRefresh
INFO: Refreshing org.springframework.context.support.ClassPathXmlApplicationContext@257b40fe: display name [org.springframework.context.support.ClassPathXmlApplicationContext@257b40fe]; startup date [Thu Feb 10 04:39:38 EST 2011]; root of context hierarchy
Feb 10, 2011 4:39:38 AM org.springframework.beans.factory.xml.XmlBeanDefinitionReader loadBeanDefinitions
INFO: Loading XML bean definitions from class path resource [configurationRestApplicationContext.xml]
Feb 10, 2011 4:39:38 AM org.springframework.context.support.AbstractApplicationContext obtainFreshBeanFactory
INFO: Bean factory for application context [org.springframework.context.support.ClassPathXmlApplicationContext@257b40fe]: org.springframework.beans.factory.support.DefaultListableBeanFactory@4bd27069
Feb 10, 2011 4:39:38 AM org.springframework.beans.factory.support.DefaultListableBeanFactory preInstantiateSingletons
INFO: Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@4bd27069: defining beans [component,server,router,srmconfigurationsresource,srmconfigurationtyperesource,srmconfigurationresource,coherenceStatusResource,configurationMapRepository,configurationOVFFileLoader,defaultConfigurationLoader,feedpagingLinkHandler,adminConfigTransformer,configurationMapQueryHandler,fileUploadResource,postProcessorImpl]; root of factory hierarchy
[Fatal Error] :-1:-1: Premature end of file.
[Fatal Error] :-1:-1: Premature end of file.
*2011-02-10 04:39:39.332/2.332 Oracle Coherence GE 3.6.0.1 <Info> (thread=main, member=3): Loaded cache configuration from "file:/etc/sysconfig/proxy_node.xml"*
2011-02-10 04:39:39.504/2.504 Oracle Coherence GE 3.6.0.1 <D5> (thread=DistributedCache, member=3): Service DistributedCache joined the cluster with senior service member 2
Also I have verified that my storage enabled node and proxy node have formed a cluster...
The client has been started with -Dtangosol.coherence.cacheconfig=/etc/sysconfig/proxy_node.xml
Thanks & Regards,
Sandeep

Hi,
Used -Dtangosol.coherence.tcmp.enabled=false to disable TCMP mode... ( Phew... :) )
In my client code we have the following statements...
*==> Service service = CacheFactory.getService("DistributedCache");*
*          Set<Member> storeEnabledSet = ((DistributedCacheService) service)*
*                    .getStorageEnabledMembers();*
*==> CacheFactory.ensureCluster();*
Does this needs to be changed for an Extend Client configuration?
With my current setup I am getting exceptions ...
2011-02-13 22:36:59.075/111.151 Oracle Coherence GE 3.6.0.1 <Error> (thread=main, member=n/a): Error while starting cluster: java.lang.UnsupportedOperationException: TCMP clustering has been disabled*; this configuration may only access clustered services via Extend proxies.*
at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:42)
at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:3)
at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:7)
at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:998)
at com.emc.srm.admin.config.rest.RestApplicationLauncher.waitForCacheServer(RestApplicationLauncher.java:155)
at com.emc.srm.admin.config.rest.RestApplicationLauncher.main(RestApplicationLauncher.java:108)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.emc.srm.common.daemon.SrmDaemon.start(SrmDaemon.java:59)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.commons.daemon.support.DaemonLoader.start(DaemonLoader.java:219)
Any ideas on how to fix this?
Regards,
Sandeep
===========================
Client configuration:
<cache-mapping>
               <cache-name>ConfigurationMapRepository</cache-name>
               <scheme-name>extend-dist</scheme-name>
</cache-mapping>
     <caching-schemes>
          <near-scheme>
               <scheme-name>extend-near</scheme-name>
               <front-scheme>
                    <local-scheme>
                         <high-units>1000</high-units>
                    </local-scheme>
               </front-scheme>
               <back-scheme>
                    <remote-cache-scheme>
                         <scheme-ref>extend-dist</scheme-ref>
                    </remote-cache-scheme>
               </back-scheme>
               <invalidation-strategy>all</invalidation-strategy>
          </near-scheme>
          
          <remote-cache-scheme>
               <scheme-name>extend-dist</scheme-name>
               <service-name>DistributedCache</service-name>
               <initiator-config>
                    <tcp-initiator>
                         <remote-addresses>
                              <socket-address>
                                   <address>X.X.X.X</address>
                                   <port>9099</port>
                              </socket-address>
                         </remote-addresses>
                         <connect-timeout>10s</connect-timeout>
                    </tcp-initiator>
                    <outgoing-message-handler>
                         <heartbeat-interval>5s</heartbeat-interval>
                         <heartbeat-timeout>4s</heartbeat-timeout>
                         <request-timeout>50s</request-timeout>
                    </outgoing-message-handler>
               </initiator-config>
          </remote-cache-scheme>
</caching-schemes>

Failed to load database information. Error in File temp_

Our environment:
Windows Server 2012 R2 Data-center Edition 64 bit
Visual Studio Pro 2013 Version 12.0.3.30110.00 Update 1
.Net 4.5.51641
Crystal Reports for VS 2013 V13.0.9.1312
Oracle ODAC 11.2.0
We created a winform application to generate a form letter report that runs fine within the IDE. When we build the the exe and copy it from the project folder to a folder on the C:\drive of this same pc and try to execute it we get these error messages (partial list);
CrystalDecisions.CrystalReports.Engine.DataSourceException: Failed to load database information.
Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
Failed to load database information. ---> System.Runtime.InteropServices.COMException: Failed to load database information.
Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
Failed to load database information.
   at CrystalDecisions.ReportAppServer.Controllers.DatabaseControllerClass.ReplaceConnection(Object oldConnection, Object newConnection, Object parameterFields, Object crDBOptionUseDefault)
   at CrystalDecisions.CrystalReports.Engine.Table.SetDataSource(Object val, Type type)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSource(DataSet dataSet)
   at cr3Test.Form1.Form1_Load(Object sender, EventArgs e)
Here is the app:
Imports System.Data.OleDb
Imports System.Data
Imports System
Imports System.Windows.Forms
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles Me.Load
        Dim crReportDocument As New CrystalReport3()
        Dim DataSet1 As DataSet
        Dim adoOleDbConnection As OleDbConnection
        Dim adoOleDbDataAdapter As OleDbDataAdapter
        Dim connectionString As String = ""
        connectionString = "Provider=OraOLEDB.Oracle;"
        connectionString += "Data Source=ourdb;"
        connectionString += "User ID=ouruserid;Password=ourpsw"
        adoOleDbConnection = New OleDbConnection(connectionString)
        Dim sqlString As String = "select * from TEMP_FRI_LETTERS"
        adoOleDbDataAdapter = New OleDbDataAdapter(sqlString, adoOleDbConnection)
        DataSet1 = New DataSet()
        adoOleDbDataAdapter.Fill(DataSet1, "TEMP_FRI_LETTERS")
        'Dim xmlPath As String = "C:\Temp\test.xml" ' use these two statment s to verify dataset works
        'DataSet1.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
        crReportDocument.SetDataSource(DataSet1)
        crReportDocument.PrintOptions.PrinterName = "HP_LaserJet_4350_PCL_5e_Info_Tech"
        crReportDocument.Refresh()
        crReportDocument.PrintToPrinter(1, False, 0, 0)
        DataSet1.Dispose()
        adoOleDbDataAdapter.Dispose()
        adoOleDbConnection.Close()
        adoOleDbConnection.Dispose()
        crReportDocument.Dispose()
        Me.Close()
    End Sub
End Class
Here is the app.config:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
    <startup useLegacyV2RuntimeActivationPolicy="true">
        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" />
    </startup>
    <system.windows.forms jitDebugging="true" />
</configuration>
We have the CPU set to x86 as we are ultimately trying to generate a 32 bit app for XP and Win 7. We only installed the 32 bit run time on this pc because we have no intention of going to 64 bit apps on the clients. Are there additional dlls or something that has to be installed in the same folder as the exe on this development machine.
Bruce

Looking at the AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_myprograminfo led us to the last dll loaded being:
LoadedModule[211]=C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crdb_adoplus_res_en.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
Scanning the community for "crdb_adoplus_res_en.dll" we got a hot on this issue again:
Failed to load database information. Error in File temp_
From the above we found this:
1. the app.exe.config is all in one package which cannot be separated with the EXE file.
2. the supporting component such as dll files, app.exe.config etc CANNOT be combined into the EXE file
Adding the cr3Test.exe.config to the same folder as the cr3Test.exe RESOLVED the problem on Win 7. It also RESOLVED the problem on Server 2012 R2.
We still need to test on Server 2008 R2 but we are hopeful when that time comes.
Thanks.
Bruce

'Cannot begin data load. Analytic Server Error(1042006): Network Error

Hi...
I got a error message when I upload data from source file into Planning via IKM SQL to Essbase (data).
Some records are found following errors.
'Cannot begin data load. Analytic Server Error(1042006): Network Error [10061]: Unable To Connect To [localhost:32774]. The client timed out waiting to connect to the Essbase Agent using TCP/IP. Check your network connections. Also please make sure that Server and Port values are correct'
What is this error about? is the commit interval too large? now the value is 1000.

Hi,
You could try the following
1. From the Start menu, click Run.
2. Type regedit and then click OK.
3. In the Registry Editor window, click the following directory:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters
4. From the Edit menu, click New, DWORD Value.
The new value appears in the list of parameters.
5. Type MaxUserPort and then press Enter.
Double-click MaxUserPort.
6. In the Edit DWORD Value window, do the following:
* Click Decimal.
* Enter 65534.
* Click OK.
7. From the Edit menu, click New, DWORD Value.
The new value appears in the list of parameters.
8. Type TcpTimedWaitDelay and then press Enter.
9. Double-click TcpTimedWaitDelay.
10. In the Edit DWORD Value window, do the following:
* Click Decimal.
* Type 300
* Click OK.
11. Close the Registry Editor window.
12. Reboot essbase server
Let us know how it goes.
Cheers
John
http://john-goodwin.blogspot.com/

Aironet client utility load new firmware 59% Error Writting to Flash Memory

Similar Messages

Maybe you are looking for