Airpirt and ethernet drivers

i recently put windows on my macbook via bootcamp and the wifi works wonderful in windows, but when i booted up in mac osx, airport will pick up the signal and then drop it. when it gets the signal, it is at full strength (i'm close to the router). it doesn't even get a signal through the ethernet port; it says it is plugged in but it doesn't have an ip adress, i've tried renewing the DHCP lease as well... i don't know what's wrong; i'm haveing to type this up on my friends desktop... grr.

Perhaps you mean the Satellite A305-S6857?
Satellite A305-S6857 PSAG0U Specifications
This unit is the Toshiba European version of the above model. It would appear to have a full set of Toshiba supplied XP drivers and utilities. Toshiba laptops are very finicky about using their own drivers, NOT the generic Windows ones, nor those directly from the chip maker.
Satellite A300-1J1 PSAG0E Specifications
Satellite A300-1J1 PSAG0E Downloads
The order of loading drivers and utilities is critical;
Drivers:
Chipset
Display
Sound
then all other drivers
Toshiba Utilities:
Common Module
Hotkey Utility
then all other Toshiba utilities
Good luck.
Mike

Similar Messages

Dhcp and ethernet drivers

The normal "plumbing" for a STREAMS ethernet driver when configured is that it has open streams to the IP (sap 0x800) and ARP (sap 0x806) modules. For most drivers supporting fastpath, the IP stream's flags are set so that the fastpath optimizations are done.
It looks like things are slightly different if the ethernet driver is setup via dhcp (i.e. ifconfig driver0 dhcp). There are now two streams with sap 0x800, one with fastpath optimizations enabled, the other without. Presumably incoming IP packets should get sent up both these streams.
Can anyone confirm this? Can anyone explain why this is the case?
Thanks,
Chris

Update: I did a lot of reading and found that Appletalk is no more. I got a parallel to USB adaptor and connected the HP laserjet printer that way and it works fine. No more ethernet connection.
On my HP PSC 1350, I discovered since the OS up grade, I could not scan and the printer utility will not function. The only software HP has for this printer for Snow Leopard is PRINT ONLY. I did find software on Apple's site which I believe is for OS 10.7 and that works (sort of), Utility still won't work and the scan function is cumbersome to operate. It is disappointing that Apple and HP cannot be more in concert concerning up grades and keeping the ability to operate existing equipment. My next printer will be a Brother next time I need ink cartridges!!

Hp 15-n200si usb drivers and ethernet control drivers not working windows 7 64bit

i recently changed from windows 8.1 to windows 7 64 bit and the drivers on the hp support site dont work for the ethernet control or usb driver were can i get working drivers??????

Hi:
See if these drivers work...
USB:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-138111-1&cc=us&dlc=en&lc=en...
Ethernet:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-137996-1&cc=us&dlc=en&lc=en...

NForce ethernet drivers and buildin firewall

I have the 7030 board, and I have some problems with the nForce Ethernet drivers and buildin firewall.
When I try to update the Network access manager with the latest v5.10 driver pack from Nvidia I get the following error.
"1: The installscript engine on this machine is older then the version required to run this setup. If available, please install the latest version of ISSCRIPT.MSI, or contact your support personnel for further assistance."
then I get this error
"1603 fatal error during installation"
I followed this link and installed a patch "IsScript9.zip" that did not work. Hope someone has a sollution to this problem.
My other problem is with the firewall, when I try to change the firewall settings to any setting, I get this error "Error in FwlProfiles Set : Unable to find profile." and the firewall setting does not change.
Extra question, does the audio driver that comes with the Nvidia/nForce driver pack not work with the onboard sound card?
As an extra bonus, and to my amusement I cant search this forum I get THIS ERROR!
"Fatal error: Allowed memory size of 16777216 bytes exhausted (tried to allocate 35 bytes) in /var/www/web5/html/acp/lib/class_db_mysql.php on line 83"
Thank you for any help.

As a point of information, I also got that error message. To get it to work I had to uninstall the Nvidia Drivers, then I ran the isScript app, rebooted and re-installed the nforce drivers, it worked. On the manual installation, when you unzip the drivers to a location, make a note of the location. Then go into Device Manager, Network Adapters and Nvidia NForce. Locate the Update Driver tab and point to the location where you unzipped the files.

Has anyone else had problems with nForce ethernet drivers 3.13 and abo

Hi, I installed the previous version of the nForce unified drivers (2.03) and I have had problems with the latest version of the unified drivers also (2.41). These both have ethernet drivers "3.13 (WHQL) + TOT .NVU"
They seem to be the ethernet drivers fault. If I install one of the latest versions of the unified drivers, windows does not boot up, it just hangs at windows logo. ?(
If I remove the ethernet cards drivers using safe Mode, the system will boot up fine. I also have to re-install older versions of the ethernet drivers to get the system to boot.
I am using the K7N2 motherboard with onboard ethernet.
Any reasons/fixes would be great , cheers :]

falty mouse got a new one worked fin

S5503w win7 64bit ethernet and audio drivers

I recently acquired a Pavilion Slimline (s5503w) desktop PC. For whatever reason the hard drive was blanked out when I recieved it and upon installing Windows 7 64-bit (Ultimate Ed) I've had quite some time locating the proper drivers. Attempting to use the recommended drivers from this website resulted in a 9996 error, you don't meet the requirments. Proper recommended installer for that version of windows, but no luck. I've also tried installing the Ethernet and Audio drivers recommended by Nividia's website. A 15.49 package, but though it recognizes the video card it doesn't notice the onboard Ethernet or Audio. Neither of these devices is listed in device manager as far as I can tell either. No typical yellow exclemation mark stating that the driver is missing.
Any help or a point in the right direction would be greatly apperciated.

Hi:
I don't think there is anything wrong with the hardware.
I would reinstall W7.
Then right afterward, install that nForce chipset driver first and reboot.
Then the video driver I posted and reboot.
Then the audio driver I posted and reboot.
If you still have issues, try a manual install.
Download the free 7-zip file utility and extract the files you downloaded into folders.
Then click on each device in the device manager that needs the drivers.
Click on the driver tab, click on update driver, select the Browse my computer for software and browse to the folders you extracted for each device.
Make sure the Include Subfolders box is checked and see if the drivers install that way.
There has to be a way to get these items installed.
If you stil can't get the drivers installed, please post the hardware ID's for each device needing drivers so I can confirm that they are what they are supposed to be according to the product specs for your PC.
If you don't know where to find the hardware ID, please read the info at the link below.
http://www.devicedriverfinder.com/blog/device-drivers/how-to-check-the-hardware-id-for-a-windows-dev...

Tecra M2 PTM20A-002T2 - Need ethernet and display drivers

Please help me with an answer!
I have spent hours chasing files and installing different stuff.
Got my sound working but still need ethernet and display drivers I think.
I am online for about 15 minutes and back on tonight.
Thanks, Nay,
Melbourne, Australia

Hi Nay,
Alternative have a look on the Toshiba European page. There I founded a similar model, Tecra M2 PTM20E, and I think the downloads should also work for your model:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Furthermore you can see an installation instructions document for Windows XP. Its a list for the recommend driver installation order, tested by Toshiba. :)
Last but not least you can identify the hardware using hardware and vendor ID. Therefore check this article:
[How to identify an unknown device (e.g. Wireless LAN module)?|http://aps2.toshiba-tro.de/kb0/HTD0302U00000R01.htm]

New MacBook Pro 10.7.2 trying to connect to HP laserjet 1200 w wireless. Tried generic driver and hpdriver and gutenprint drivers. "Unable to connect due to error". Deleted prefs, restarted etc. Any ideas ?

Just purchased a MacBook Pro OS 10.7.2. Cannot get it to print with HP LaserJet 1200.
Connection is wireless, able to ping printer. (also tried MacBook using ethernet).
This HP 1200 prints perfectly with another mac running Snow Leopard.
Tried HP 1200 driver, which, according to HP, is not working with 10.7.2; They suggested Gutenprint
tried generic printer from Mac, (message was printer is busy);
tried CUPS Gutenprint 5.0.2,(message says "unable to connect due to an error"
removed preferences and re-added printer, rebooted etc.
Any thoughts? I thought it was the driver, maybe there are other drivers out there or maybe it's something else???? Thanks

Thanks for the replys.
After spending an hour plus, uninstalling and reinstalling drivers and still not able to print, my husband, sits down, plugs in an ethernet cable, reinstalls the printer with the ip, and it prints. !!! I'd already done that , but that was before I deleted the preferences and installed the Gutenprint driver. I think it was the new Gutenprint driver that did it.

I can't find My CQ60-215EE Sound and Ethernet XP SP2 driver. any help!

I downgraded my oprating system to XP I found all drivers accept sound and ethernet, can any body help me
This question was solved.
View Solution.

Hi,
MS-UAA (required with a reboot before Audio driver) here
Conexant HD Audio here
Realtek RTL8101E Family PCI-E Fast Ethernet NIC Driver here
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

P7NGM Ethernet drivers won't work

I have a MSI P7NGM-Digital motherboard. Everything else works fine, however I can't get the standard Ethernet drivers to install. I've sourced the NVIDIA MCP7A Chipset Drivers from both,
1) here -- http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1607
2) and even here -- http://www.gigabyte.com.tw/Support/Motherboard/Driver_Model.aspx?ProductID=2946&ost=others
But neither will work. Anyone have any idea where to find drivers that will enable the Ethernet hardware?
Thanks in advance!
The system has:
E3110 Intel processor
2GB of 800Mhz ram (single channel)
Seagate 500Gb ST3500630AS
Running Win XP Pro SP3

Supports 10/100/1000 Fast Ethernet by Realtek® 8111C
suggest you google Realtek® 8111C
as im not surprised nvidias driver is not working
http://www.bioticaindia.com/8111c.html
is one i found

Windows Server 2008 x64 on Bootcamp: Ethernet drivers missing/not working

Hello folks,
at the moment I try to get Windows Server 2008 x64 running on a new Mac Pro (Early 2009).
Installation of Windows Server 2008 x64 (Enterprise) worked out of the box. However, the ethernet drivers do not work. Ethernet cards are not detected and working due to missing drivers.
I have tried several different Intel driver packages. All of them report "No intel card found.". However, the vendor ID of the ethernet card clearly points to Intel.
I have not been able to find a driver yet, does anyone have an idea?
E.g. does someone know the exact chip name? The driver "name"? Anything else?
Thank you in advance,
Stefan

Erik - Thanks for the info!
I use 64-bit applications ... some notes on why:
enterprise supports up to 32GB of memory so the argument to use x64 for memory support is nullified.
... that's not correct. x64 windows versions allow 64-bit addressing, so 64-bit applications created for x64 windows can take advantage of large amounts of cheap RAM as 32-bit applications cannot. 32-bit applications (they are all 32-bit applications in a 32-bit Windows version, even in Server 2008) are restricted to a limited process space of at most 2 GB.
It's true there is a LARGEADDRESSAWARE kludge to enable limited use of up to 3 GB by a user process (and there is an equivalent to this in Server 2008), but this has gone nowhere because it is far more straightforward and more productive for an applications developer to simply go 64-bit rather than invest any engineering resources into a one-of-a-kind kludge for an era that is already past.
Yes, it is true that if you are stuck running 32-bit applications you have less incentive to use x64 windows. But going true 64-bit is a huge advantage in reliability and performance. Given the very low cost of RAM in modern times it makes sense to do so, even in notebook settings that are often limited to only 4 GB of RAM. 64-bit applications in Windows tend to have decisive performance and reliability advantages so whenever one competitor in a given segment makes the jump to 64-bit pretty much all of them must do so.

Satellite P200 PSPBGU: Where to find ethernet drivers for windows xp

Where can i find ethernet drivers for windows xp? I've tried a lot of drivers, but no one installed.
Help plz
P.S. Everest says that ethernet card is - realtek rtl8139/810x fast ethernet adapter

> Hi
>
> Why you dont search simply for the Realtek RTL8101
> Family PCI-E fast Ethernet NIC (NDIS 6.0)
> Google for this Realtek Lan card and you will find
> one.
>
> I have goggled and got some websites which provides
> the LAN drivers!!!
>
> How did you try to install the LAN drivers??? You
> should access the device manager and should choose
> the unknown device from the network adapters
i googled for it, i found some drivers, i tried to install the using device manager, but it didnt installed :(

I need Ethernet drivers & USB 3.0 Drivers

i need wired local area connection and usb 3.0 drivers.

Hello @skr512,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are looking to install USB 3.0 and Ethernet LAN drivers for your desktop computer. I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number.
How Do I Find My Model Number or Product Number?
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Usb 3 and ethernet not working

hi...
i bought a new pavilion model 500-400na with windows 8.1.. i format it and installed windows 7 64bit... now my usb 3.0 and etherent `drivers is not compatabile and they are not working..
please someone help me to solve this problem...
This question was solved.
View Solution.

Hi:
I can't get to the HP support page to find the drivers you need but if you install the AMD chipset driver from the link below and reboot, you will be able to get the USB ports to work.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
Ethernet: DL and install the second driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTy...

Audio and wireless drivers for c738tu

hi. i had to recently install windows xp on my compaq pressario c738tu. now there is no audio and the control panel shows no audio device installed. also my wireless network and ethernet controller is not working. i downloaded the available drivers for xp from the hp site, but to no use. please help.
Message Edited by swastikagrawal on 05-27-2009 07:39 AM
This question was solved.
View Solution.

Hi,
Before Conexant Universal Audio Architecture (UAA) here
Conexant High Definition Audio Drivers here
This will create a swsetup folder in c drive ("C:\swsetup\sp34200")
Installing Audio drivers may result in an error. But continue with the following steps to get the audio driver installed correctly.
Open the Device Manager:
1. Click on Start and select Run. Now type devmgmt.msc and press enter.
2. Right click on "Audio device on High Definition Audio Bus" and click Update driver.
3. Select "Install from a list or specific location"
4. Click Next. Then select "Don't search, I will choose the driver to install"
5. Click Next and then select "Sound, video and game controller" from the list.
6. Click Next and then click Have Disk.
7. Click Browse C:\swsetup\sp34200 folder and select the .inf (wis30b2a) file and click open and Continue with the onscreen instructions.
Similarly install Modem Drivers:
Conexant HDAUDIO Soft Data Fax Modem with SmartCP here
1.Right click on "Modem device on High Definition Audio Bus" and click Update driver.
2. Select "Install from a list or specific location"
3. Click Next. Then select "Don't search, I will choose the driver to install"
4. Click Next and then select "Modem" from the list.
5. Click Next and then click Have Disk.
6. Click Browse C:\swsetup\sp33890 folder and select the .inf (wis30b2b) file and click open and Continue with the onscreen instructions.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Airpirt and ethernet drivers

Similar Messages

Maybe you are looking for