Airplain Mode Pop up and Sound Issue

Hi Guys,
I've had my iPhone for 2 days now, (White 16gb 3Gs) it has been working great until about 2 hours ago. Firstly i keep getting a pop up message saying "This accessory is not made to work with the iPhone" then it asks if i want to switch to Airplane Mode. There is nothing plugged in?
Secondly i have noticed that the sound is not working. I can listen to music with the headphones is but when I try and play through the iPhone its self there is not sound, the same when playing the games and on YouTube etc...
I have tried both restart and a full reset but it still the same with no sound and pop up.
Regards,
Joe
Message was edited by: JoeyFizzle

Very odd. Since you've done a reset, the next step is to restore, either from a backup or as new. Since you've only had it 2 days, I'd suggest as new. You'll then have to setup your email again and sync to get your iTunes stuff back on. You can probably do it all in less than an hour (I have).
See p. 200 of the manual... http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

Similar Messages

  • POP password and username issues

    I've had an inconsistent issue with email.
    Every once and a while I get a message, while trying to connect and get email, saying that the pop password and username are incorrect. Which they are not. And then my mail will either download right after that, or download a while later.
    Has anyone experienced this?

    Does this only happen when using Edge to download
    mail? Or does it happen with both Edge and WiFi?
    If only Edge, I would venture a guess that maybe the
    edge network is cutting out and your
    username/password gets a bit scrambled. Then later
    the Edge network connection is fine and it can get
    the mail.
    sound like a reasonable explanation. (sort of, drag about getting things all scrambly)
    It only happens when I'm using Edge.
    If you read or hear anything else on it please post here.
    Thanks for the feedback

  • Pixelated Graphics and Sound Issue (Gt70 2pc dominator gtx 870m)

    Sup.
    Bought my first MSI gaming notebook a couple days ago. It's fairly nice but it seems I'm having a couple issues.
    First:
    Sound issue. I have a Turtlebeach Z22 headset. When using it on my MSI laptop I get a series of pops every couple words.    The Z22 uses both usb and aux for the mic/headphones and I have tried everything from swithcing jacks, usb ports, updating drivers and playing around with realtek settings. No dice.
    Second: For some reason in game cutscenes have a lot of pixelation.
    I have tried crysis 2 and farcry 3 so far on max settings. Any sort of cutscene that uses a video clip (like Farcry's video tutorials) has a lot of pixelation and is sometimes fuzzy. The games are usually fine for the most part. I have updated my gfx drivers played with gfx setting and set launching options to Nvidia as global.
    Any ideas?

    1. Quote from: sidtheviciousyt;112316
    When using it on my MSI laptop I get a series of pops every couple words.
    Do you mean the pop sound? It would be better if you can share a video or sound record of the situation.
    2.
    Quiet manay people talk about the issue, try to change the game setting to improve the situation.
    Crysis 2
    https://www.youtube.com/watch?v=5vGD-zSyE9I
    Farcry 3
    http://steamcommunity.com/app/220240/discussions/0/846940248862985794/

  • Apple TV 2.3 and sound issues

    The 2.3 update seems to have cured the hang and reboot issues that were introduced in 2.2, BUT now when my TV show audio playback contains sounds like "ssssss", car engines, or white noise, I'm getting a strange oscillation in the audio. It's pretty irritating.
    Anyone else?

    The 2.3 update seems to have cured the hang and reboot issues that were introduced in 2.2, BUT now when my TV show audio playback contains sounds like "ssssss", car engines, or white noise, I'm getting a strange oscillation in the audio. It's pretty irritating.
    Anyone else?

  • Yosemite graphics and sound issues

    this is my computer:
    MacBook Pro (15-inch, Early 2011)
    Processor 2 GHz Intel Core i7
    Memory 4 GB 1333 MHz DDR3
    Graphics Intel HD Graphics 3000 384 MB
    i have been dealing with a very inconsistent problem since i've downloaded yosemite.
    I'll start with the one consistency.
    my computer no longer chimes at start up.  Thought it was a hardware problem.  I have run an AHT to no avail.  no problems detected.  although it may be an issue with the lack of RAM seeing as 'the internet' recommends at least 8GB for Yosemite. 
    itunes takes approx. 10 minutes to open.  (also may be a RAM problem to this is regardless of whether anything else is running)
    as does iphoto
    Now the inconsistent stuff:
    the computer crashes when dealing with any time of image files may it be picture or video. 
    most of the time the computer will have some trouble playing video files and at times the whole computer will crash very spontaneously.  I have updated the flashplayer as well as my media player of choice VLC.  I do have stints when VLC will work just fine for several films but then will randomly crash.   When the computer crashes it will go into a start up loop of the gray apple screen to a blank gray screen which will then crash and restart again and again. 
    I can't, for some reason, never get the recovery mode to work. Command R takes an eternity and then goes to gray screen.  Command D shows no problems. 
    I have reset the PRAM and SMC which at times works and at times doesn't in my quest to get past the gray blank screen. 
    after the computer has started up in my juggling act there is a graphics problem note. 
    youtube on safari is very glitchy.  the glitchiness sort of began with Chrome so deleted it and started to use Safari sometimes no sound.  sometimes the video lags.  i have to move the scroll around a bit for it to work.  once it gets the hang of it its fine though...
    when the computer comes out of sleep it may take 30 seconds when i haven't used it for a while which i understand is a hardware sleep thing.  i have heard stories of the black screen and functioning mouce and this happens here quite a bit.  from 5 to 30 second of time.  the main interesting point is that it at times starts up ok and at times will give me a very glitched out login screen, yet the login panel itself is fine. 
    i have been thinking about downgrading to maverick again or even lion for the sake of installing a new operating system and to deal with the RAM but i think there is a collection of minor problems and i don't really know what i'm doing completely.  I will buy more RAM if this issues is salvageable.  all in all i'm one those OMG my computer ***** now that i've downloaded yosemite people. 
    can someone please point me in a self suffiecent direction? are there any diagnostics i'm not looking into?   is my computer just too old for Yosemite? am I doomed to pay some mac wiz a ton of money? can all this just be a clunky OS and too little RAM?
    i hope this helps other people and thanks for anything you have to add.  

    Also when I do a command R reboot, the computer freezes on the gray screen with the fan running vigorously. I have to shut it down by hand to do anything.

  • SD Card Issues and Sound Issues

    Hello all,
    I bought my Xperia Z2 probably 2-3 months ago and I have to say I do love this phone.
    However I have come across a few issues that seems to be, not so common as I cannot find any solutions online (Which is why I'm here).
    I am having 2 issues:
    1st Issue:
    SD Card Issue, this is a funny one as I have not been able to identify what actually causes this issue. Now this all started (or when I started to realise the issue) when I changed some settings in the Camera App. I saw that it was saving photos to "Internal Storage" and since I specifically bought a new SD card for the Xperia Z2, I wanted to store photos on the SD card instead.
    So I changed it to SD Card Storage and all is well (At least, that is what I thought).
    After taking some photos one day, I got home and wanted to preview them, in the photos app and Album (Sony's Photo Previewer) it shows that the photo is corrupted or missing (Depending on which app I'm using). This really annoyed me as the photos I took seems to be all lost and corrupted. So I tried to use a file explorer (Including File Commander) to find the actual file and open it, but it seems to have the same problem. I get this grey background with a picture of a mountain with like a thunderbolt sign (Broken sign).
    Following this, I have also tried to copy some video files onto the SD card and it has been giving me troubles too. I tried to copy videos onto the SD card in 2 ways, first way is to take the SD card out, connect it to a SD card reader and plug that into the computer. After it finished copying onto the SD card, the files would just disappear (I use computers a lot and this was very surprising and new to me... It's like the SD card deleted the files right after it was copied, or maybe even 'hid' the files).
    So since that method didn't work I thought I would try putting the SD card back into the phone and connect the phone to the computer then use Sony's MediaGO (Computer App) to transfer the videos and it sort of worked this time. I copied 14 videos over and only the first 2 videos are working, the others are all "Media is missing" or of some sort. I checked the video's format and they are all either .avi or .mp4 which I don't think is a problem as the first 2 videos are in .avi so surely other .avi videos would work too? Guess not...
    So it seems like I am having troubles with Video and Photos on the SD card as music is working 100% fine. Used Media GO to copy the music on and it's all working wonderfully.
    Some of you might suggest formatting the SD Card, I will say I have... I have tried the above methods before formatting AND after formatting (Formatting using Xperia Z2, or shall I say "erase").
    The SD card I have is Sandisk's 64GB Ultra (I bought this to anticipate 4K or at least 1080p video recordings).
    If the issue here is SD Card compatibility and I was silly enough to not have seen that prior, then I would gladly admit it's my fault and be happy that the solution would simply mean to buy another SD card.
    But that said, I highly doubt that would be the issue due to the fact that the SD card is made for performance (Not the best performance as the Extreme and Extreme Pro range are a lot better) and the card is new.
    2nd Issue:
    Now this issue is not as bad as the first issue, it's something to do with the sound. I understand the phone has 3 sound controls, one for the Ringtone for when you get a notification or/and phone call, one for Media and one for Alarm. 
    What I do is I have the Ringtone volume sitting at around 50% and Media will be dependent as I change it when I open an app but the issue I've been having is this:
    If I open an app (Mainly games that has sound/music) and I change the Media volume to say 70% or even 20%, whenever I get a notification whilst in-app the notification volume seems to be at 100% no matter what I do with the media volume. This is weird as my default Ringtone/Notification volume is sitting very low at around 50% or even if I change it to 20%.
    What am I missing here? Any thoughts?
    With the above 2 issues, last resort would be to factory reset my phone but will be willing to do it if there's a high chance of the issue getting fixed.
    Your thoughts will be greatly received as right now I'm just lost and not sure what to do with the issues. I'm slowly getting the feeling that I should just give up on the phone and use it for phone calls, music and forget about the whole photo/video taking which is very sad as I love the phone's photo/video taking features.
    Solved!
    Go to Solution.

    Hello Rickard,
    Thank you for the link, I have started the test and 10 minutes into the test the speed for writing dropped. Anyways I only managed to get through in writing 8GB of data then I gave up. I then started to verify that 8GB of data that was written on the SD Card.
    I have to say, it does seem like that SD Card is defective
    Thank you for providing the link, what I will do now is get another SD Card and see if the problem is still there.
    If the problem goes away I would consider my 1st issue being solved
    However I am still not sure about my 2nd issue as this is not related to the SD card. Even without the SD card in the phone I seem to be experiencing this problem.
    It's frustrating sometimes as if I'm trying to keep the volume down and play a game I can't because any notifications that comes through will be at 100% volume.
    Perhaps there's a setting I'm missing?
    Your help would be greatly appreciated.

  • I'm having issues Buying my ALBUM from iPhoto. I think Pop Ups and other issues (on my MAC) are blocking me from Ordering?

    I was able to BUY/ORDER an Album before. Last time was Feb. BUT since then I am having issues with annoying Sites that Pop Up when I click within a website that I'm on. i.e. Trip Advisor>another website will open and then another and then another! VERY Frustrating! I need the pop ups to run Netflix or other programs.
    1) I'm not sure this is the issue that is preventing me from Buying my Album?
    2) I tried to EXPORT my Album over to my iPad thru iCloud but it ONLY exports the individual jpegs.
    After hours and hours of creating this Album I don't want to start again on another device ;-(

    Helpful Links Regarding Malware Problems
    If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide, AdwareMedic, or Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support.
    Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
    The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
    Fix Some Browser Pop-ups That Take Over Safari.
    Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
    Quit Safari
    Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
    Relaunch Safari
    If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
    This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.

  • Small "freeze" and sound issue when taking a full screenshot

    Hello,
    This is a strange one, and I've not been using Macs properly for very long, so bear with me
    It only happens when I use cmdshift3 to take a full screenshot, the other shortcuts for taking them are fine, I do get a similar issue when using Grab and it, too, only occurs on the full screen capture. What happens is, the sound clip of the camera noise will begin to play, stop, it goes a little distorted then the windows on screen will freeze up, the mouse will still move, and it stays like that for around 5 seconds until the file is saved to the desktop and all goes back to normal again. I'd like to reiterate that it only does this when i do a full screenshot, and the smaller one with the crosshairs and the individual windows is perfectly fine.
    I tried searching on google, on the main support section and the forums and nothing has come up that's been helpful. I've had a look in the system logs, and at the time's I take the screenshot, the system log reports the following:
    Sep 24 14:04:09 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2,728)->(3,7bd).
    Sep 24 14:04:09 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (3,728)
    Sep 24 14:04:32 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2,71a)->(3,7ec).
    Sep 24 14:04:32 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (3,71a)
    Sep 24 14:04:33 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (4,73a)->(5,7c8).
    Sep 24 14:04:33 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (5,73a)
    I know from that it's referring to my soundcard and there's a memory reference, but that's about as much as I can figure out.
    It might not seem a big issue as the other methods are ok, but if it turns out to be something much deeper I'd like to try and fix it now before it becomes a problem.
    Does anyone have any ideas?
    Thanks,
    Claire

    Bingo! EXACT same problem here! It seems to me its a software bug.. ??

  • MSI GX60 Destroyer Start up and Sound Issues

    Once again I have encountered an error where after receiving a new update for Windows 8.1, I now have the issue where start up programs will no longer start up for over an hour or longer from when the system starts, as well as I can no longer turn on my sound as I constantly receive the error message "The Audio Service is not running" and anything I try will not restart it whatsoever.
    I have had this issue before and due to extra issues, I have had to completely send off the system for repairs at the repair center. However, I feel that this is more being caused by the update itself, also seeming as this will be the third time within around 2-3 months I have had to send this system off, if I cannot solve it without sending the system off I will likely be seeking a refund instead due to the negative experience with this system.

    Quote from: CloverSquirrel on 18-October-14, 08:40:01
    Those links don't help as I already tried some of those solutions, the issue isn't that I have a slight delay, its that the programs don't load for around an hour or more at the moment. Also I still have the audio issue with the system as well and now I recently found I can no longer go into the control panel either.
    Then your issue isn't related to the system not working at all. It really sounds to me that you have a virus of some kind. Do you use a virus scanner?
    Do you install questionable material? (aka pirated games/software?)
    The more and more that you actually go into detail about the 'problems', the more it seems to me that you've got a virus.
    Lastly, you really need to do a much better job explaining what the problems are. Giving people trying to help you half the story (oh, yeah, also audio doesn't work and I can't go into control panel....) only leads to us not being able to help you. You might want to look into this to get a better idea of what information will get you a better response much quicker:
    >>Posting Guide<<

  • IBM x31 pcmanfm LXDE usb disk and sound issue

    How can I auto mount external USB disk
    my daemon list looks like this
    DAEMONS=(@syslog-ng @hal @network @net-profiles @netfs @crond @fam slim)
    and modules look like this
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(e100 eepro100 mii slhc rt2x00lib rt2x00pci rt61pci ac97_bus snd-mixer-oss snd-pcm-oss snd-page-alloc snd-pcm snd-timer snd snd-ac97-codec snd-intel8x0 snd-intel8x0m soundcore vboxdrv)
    Also I am not able to hear no sound, I am in the audio group and ive seen channels through alsamixer
    anyone else having issues
    Last edited by venky80 (2009-01-22 04:16:08)

    Hello Eugene,
    Interesting - possible - coincidence. I just posted about a similar seeming issue here:
    <http://discussions.apple.com/thread.jspa?messageID=10425731#10425731>
    Notice that I've checked Disk Utility's repairs report as well as the System Log with Console: both show mention of USB related items.
    This may not have anything to do with your issue but I thought it worth mentioning.

  • Embedded video's and sound issue

    I have a keynote presentation I have created and I embedded a video in one of the slides.  The video plays just fine on the iMac with sound but when I play it through Apple TV or a projector the sound doesnt come through the TV or sound system just through my laptop.  How do i get the sound to come through the TV?

    I assume you have used the headphone jack to connect your computer to the sound system. You have to go into system preferences and make sure the SOUND is set to output to the Line Out and not the internal speakers.
    If you are AirPlaying it might be an issue with the age of your computer or you don't have Apple TV selected as the SOUND output preference.
    Check your sound preferences to make sure the sound is being sent to the right place.

  • Blocked POP 3 and webaddress issue?

    Recently a Verizon tech had to come and reset something with our box outside the home and now my POP 3 email and associated website aren o longer accessible through my home network.
    The webaddress is www.cmas-md.org (IP: 67.225.166.240)
    Mail server in and out is mail.cmas-md.org
    I tried turning off the computer firewall and the router firewall and stil could not access the site or email. I also verified that the ports were being allowed through the router, 80, 25,995.
    I am unable to ping the above site the request times out. A trace route gets to about 11 hops then fails. I can ping other sites and browse the internet without an issue, just not to the above site. I recently contacted fios support and they said it is the actual website or their server. I know this cannot be true because I can access the site and my email from computers on other networks. I tried multiple browsers and they fail as well. If I enable the turbo feature in Opera browser I can access the CMAS site but the email always gives an error that it can not conenct to the mail server. I am at work now and can access everything fine without issue. I am in Baltimore, Maryland and was wondering if anyone could test the site, ping/trace route, that is using FIOS and let me know if there is an issue for them as well.
    Thanks,

    it will self heal on it's own "eventually"  
    you can surf immediately, I bet, if you use a web proxy.   like greensurf.info  (you go there and surf through their proxy)   
    if that is succesful then you know it's the blacklisted or blocked ip scenario, and only the web site or admin of that website can update their bogon filters to allow you access.     you would probably email them for that. 

  • IPod Play/Pause and Sound Issue

    After the recent 3.1.2 update I'm having a problem with my iPhone's sound cutting out. It's not the speaker because I can reboot the iPhone and it will come back. I'm also having the issue where when I hit the play button in the iPod app after it switches to the pause button it immediately reverts back to the play button. Has anyone had/resolved the issues?

    I was just coming in here to search for an issue like this, and found this thread.
    I started experiencing what seems like this same issue yesterday. When playing MUSIC ONLY on the iPod, iPhone 3G, random skipping, within the songs, pausing etc. is occurring. This is not occurring when playing podcasts however.
    The other oddity here is it does not happen, when playing through headphones. It's only happening when using an auxiliary cable through my car stereo. I know there is nothing wrong with the jack, or plug, as other devices, including another phone\ipod work just fine.
    I'm calling Apple regarding this as I literally just had the phone replaced due to a problem with the ring\vibrate switch falling off, so this is a new\replacment 3G. It's been updated to the latest of everything, so this is really disturbing me at this point.

  • Video and Sound issues depending on how ATV2 is first used

    I have the HDMI run directly to TV, and the optical run to DAC/Amp
    1) TV is first off, then stream music from iPhone through Airplay
    Sound is great.  But later when TV is turned on, ATV2 only shows the apple logo with everything is only shades of green. Can not get the menu to appear again.
    2) TV is first on, then stream music from iPhone through Airplay
    Video works fine, but sound has noise and popping,

    And 3) A loud POP from the optical out when ATV2 first awakes
    Latest 4.4.3 firmware

  • Satellite A665 beeping and sound issue

    I have a Satellite A665 and when I start the computer, there is a long high pitched beep initially and then as it goes for a short time through the start up process, prior to Windows, it beeps again.  The beeping is coming from the bios, I believe since I have uninstalled the sound components in Device manager to test this.  Once Windows 7 is completely booted up and the sound components are reloaded, the speaker icon vibrates and has a continuous loud hum.  It is a high pitched hum that never goes away and the icon vibrates like crazy.  I have reseated the RAM and am at an impasse as to what to do.  It does sound like a BIOS issue but not sure what the next step may be.  It is 2 years old and out of warranty.
    Thanks!

    I have not tried updating the bios since the sound was so severe I doubted that would help but I may try that. 
    I uninstalled all sound devices in Device Manager and then rebooted and the sound was unchanged.  That is what leads me to believe the issue is not with the sound devices.  I had the speakers unplugged and the devices uninstalled and the sound remained unchanged.  The only part the sound system plays in all this is that the sound icon (little speaker in the lower right hand corner) vibrates like crazy once Windows boots up and the devices are reloaded.  If you turn up the sound on the speakers, the hum or beep is constant and gets very loud.
    I have been repairing computers for over 40 years and I have never seen anything like this.  Any help would be greatly appreciated!

Maybe you are looking for