Airplane mode key (F7 key) not working

I can activate airplane mode in setting but when I press the F7 key to toggle on and off nothing happens.  Anyone else have the same issue or do I have a defective key?

Hi there!
I am new in lenovo. I just bought a lenovo flex 14 a couple days ago. I already update it to windows 8.1, so i have this problem. I tried to download and install the previous version driver of energy manager/power management. But the problem is still exists. I cant set the airplane mode by F7 hot key, also through 'PC settings'.
Link to picture
Moderator note; picture(s) converted to link(s) About Posting Pictures In The Forums

Similar Messages

  • Appended Key figure is not working in Delta reverse record

    Dear All,
    I have enhanced 2LIS_11_VASCL datasource, to pull value from condition record, called Surchage.
    I have set reversal indicator for this field in my datasource. I have written code in CMOD to get this value from KONV table of that sales order.
    Now when value  is changed, delta record for this, automatically creates reversal record, but it shows new value of surcharge as negative, because that code is pulling value which currently exists in table.
    For example for order 350089 , if surchage is $ 100 .  User changes it to $200
    Then I get following record.
    Reversal Record  - $200 (This should be instead -$100 , i.e. previous value)
    New Record - $100.
    Because of this my new value is not getting updated in table.
    I can't use overwrite mode in ODS because some other technical reason.
    How can I solve this problem?
    appended Key figure is not working in Delta reverse record

    LIS have before-after delta. So ODS should be in Overwrite mode. If that is not possible.. try sorting the records in Start Routine such way that the - 100 $ is above the - 200 $ records in Data Package.
    but this is risky as it will affect other key figures for which things maybe fine. I guess you need take Data Package records in an internal table. And then sort this internal table. then you can read the internal table in update routine of this key figure.
    OR (If you are on BI 7.0) you introduce an InfoSource in between DS and DSO with Overwrite mode for this Key Figure.

  • Numeric key pad is not working, card reader is not working

        Numeric key pad is not working, card reader is not working, 

    Did you (or someone else) physically open the laptop case?
    If you did, then some cables might have gone loose inside.
    If you didn't, for the card reader, check if appropriate device drivers are installed in windows device manager.
    for the numeric keypad, first tap once on the NUM LOCK key and check.
    If this doesn't solve the problem, boot to "Safe mode", and check.

  • How to fix my iPhone keys that will not work

    When I am using my iphone keyboard, the upper row Q thru P will not work. That is in verticle mode, when laid horizontally, the R will not work.
    On the number keys, the 4 will not work. The comma key also does not work. 
    I was told that a software restore could cure this.  Also, I tried to load the new version 7 software, hoping this might help.  But the Accept option would not work when accepting the TERMS from Apple.  It seems that only works in verticle so that whole row/area does not work.

    RESET DEVICE
    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

  • My 6, 7, y, u, h, j, n, m key's are not working on my hp pavilion g6 PLEASE HELP!!!

    my 6, 7, y, u, h, j, n, m key's are not working. they used to work but even then i had to hold down one of those unresponsive keys to get the others to work now i can't use them at all!! i have to use the on screen keyboard which is really annoying but is the only way i can use my laptop
    i have a hp pavilion g6 4GB  i3 core 64 bit windows . i think the warrenty has expired as it is a refurbished laptop

    Hello momomhammed:
    I think you forgot to type in HP g6 1239as because I could not find HP g6 123sa. This is the only steps they give for your lat top. http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01458194&tmp_task=solveCategory&cc=uk&dlc=en&lc​... I would do the reset direction first then do the update drives for it. To see if that fixes the issue. If it doesn't then yout computer needs repairing. frrw.

  • I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys.  What's really weird is that happens randomly.  I've never spilled anything on it

    I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys.  What's really weird is that happens randomly.  I've never spilled anything on it, and I can't for the life of me figure out how to fix this.  Can anyone help?  of course this happened after my warranty expired.

    **update**
    I don't know if this will help someone but I am posting this for that purpose.  In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!).  Well I didn't want to do that but it always stuck in the back of my mind.  I had given up, really, and was planning to take my MBP to the apple store.  But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working. 
    So, maybe try keeping the MBP in a cool place when it's off.  Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
    Hopefully this might help someone.

  • Home Keys on Laptop not working sometimes

    Good Day,
    Our HP Pavilion G4-2013TX's keyboard acts up sometimes. The Home keys (i.e., A S D F J K L and semi colon) keys sometimes do not work. I just have to wait a bit or furiously press them to get them to work again.
    The keys are working currently (this message is evidence.) I don't know how to invoke the error at the moment.
    Please help. I've been getting instances that I need to have a good working keyboard but the homekeys don't cooperate. A Sort of troll, actually.
    Thanks in advance,
    Matt

    Hi @MattFromPH 
    Welcome to the HP Support Forums!
    I understand that you are having trouble with your keyboard behaving intermittently. I am happy to help with this.
    As a start I include the support page for your notebook, which includes the current HP modified drivers for your notebook, and also I link the service manual, which can be helpful when it comes to cleaning if followed carefully.
    HP Pavilion g4-2013tx Notebook PC
    HP Pavilion g4 Notebook PC - Maintenance and Service Guide
    With those two resources, then check out this page and see if anything helps with your problem.
    Notebook Keyboard Troubleshooting (Windows 7)
    Cleaning your Notebook PC
    Let me know if you need any more help.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Hello, I purchased design premium 4.0 German Windows  (LIZ 390232 from 22.02.2010) from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not  disable the product key. He loaded it, but onl

    Hello, I purchased design premium 4.0 German Windows  (LIZ 390232 from 22.02.2010) from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not  disable the product key. He loaded it, but only in Englisch (trial version?) Please help me for the next step. I have the license agreement in my hand.

    Moving this discussion to the Downloading, Installing, Setting Up forum.
    Jakobh53157856 before you begin the installation process please complete the transfer of license process to transfer the Adobe Creative software license you wish to utilize to your possession,  You can find details regarding the transfer process at Transfer an Adobe product license.

  • I purchased design premium 4.0 German Windows  from my friend and wanted to installation it. However, the key code does not work.

    I purchased design premium 4.0 German Windows  from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not  disable the product key. He loaded it, but only in Englisch (trial version?) Please help me for the next step. I have the license agreement in my hand.

    Nobody here can help you with this. You'll need to contact Adobe directly.
    Did your friend fill out and send in the license transfer form?
    Transfer an Adobe product license

  • Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q with a real time mode but it is not working but when i run it with uploading it into the PXI it save in to the file

    Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
    Attachments:
    PWMs.vi ‏130 KB

     other problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2

  • My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

    My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

    If you do not find a solution in the iPod nano (6th generation) - User Guide, suggest that you call AppleCare if still under warranty or take a trip to your local Apple Store or AASP.

  • Econo mode and turbo is not working on my MSI Gx620 windows 7 32bit

    econo mode and turbo is not working on my MSI Gx620 windows 7 32-bit.
    I just bought my laptop yesterday and instantly installed a windows7 32 bit  os, everything is working fine but the econ mode and turbo mode is not working.
    can you pls tell me some basic points why is it not working on my laptop??

    install scm: http://eu.msi.com/index.php?func=downloadfile&dno=10455&type=utility

  • Key figure Attributes not working

    Hi ALL,
    We have an isuue with one of our Planning book. Key figures which are supposed to be open for editing are  showing as output only and key figures which are for output only are showing as open for editing.
    I went to design mode to tried to change in manually , if I chane one row attribute all rows are getting changed.
    I found a macro which assigns Key figure attributes which I tried to activate but still not working. We are using SAP SCM 4.1 Version.
    Can any advice on this?
    Sivarama

    Thanks Problem is now solved. Looks like some has made changes in the design and there are macros which are working and as you said they might be conflicting. I changed the design which was working weired yesterday when I tried to cande one row attribute and all rows are getting applied, this worked fine today. And I deactivated the macro which is working on some row attributes and activated again.
    I am not very clear what went right but working.
    Sivarama

  • I have updated to Mozilla 16.0.1 and yahoo toolbar 2.4.8.20120412011105. Search assist now no longer works on the toolbar. Enter key also will not work on toolb

    I have updated to Mozilla 16.0.1 and yahoo toolbar 2.4.8.20120412011105. Search assist now no longer works on the toolbar, nor does the enter key. I've reinstalled both Mozilla and the yahoo toolbar. I've followed the instructions given in the customize toolbar section, but I am thinking that perhaps this toolbar just doesn't work with Mozilla?

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Numeric Key Pad is not working. How do I fix this?

    FireFox is an excellent browser but I am now unable to use the Numeric Key pad and at times the whole keyboard will not work until I reboot.
    Where is it that I would change whatever settings to use the Numeric Key pad.
    The Key Pad works fine otherwise.
    I assume the keymap has been remapped?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • A few keys on the Integrated key board do not work  help

    After much trial and error I have found that there is no way for me to fix the fact that my qwertyuio keys on the integrated keyboard do not work....I have not taken my MBP to my local store yet because I have many projects and papers due this week and kinda need it. Luckily i have a bluetooth keyboard that works fine but i do not feel like bringing it everywhere with me in order to work on these papers and projects...where I live in not exactly the quietest place and I would like to go to the library on campus...does not work with those keys not working considering i can type four of the five vowels in the english language

    Hello Hickster and welcome the Apple Support Forums,
    It definitely sounds like a hardware problem so these things probably won't work but you can try:
    Reset PRAM (hold the command-option-p-r during boot up after the chime)
    open a new account and see if the problem persists.
    go to keyboard preferences and make sure all the keyboard modifier keys are set to default
    start the machine in Safe mode by holding the Shift key while it starts.
    You could try to reset the SMC by turning off the machine and removing the battery and power cord, holding the power button for 5 secs then putting it all back together.
    Like I said, these are unlikely to work but are pretty safe to do. That being said I highly recommend you make a complete cloned backup to another drive before you start messing around with key combinations etc. Be sure to make a back up before you take it in. Specifically back up all the papers you're working on to a thumb drive or some easily accessible media in case there is a problem.
    You could then work on your papers with the Library machines (export your files to windows friendly on the thumb drive) while you wait for your MBP to get fixed.
    If you still have applecare that is the way to go but if not then you could try to follow the iFixit guides for removing the keyboard and re-installing it to see if it just needed to be reseated. If you have applecare you will void it by doing that so make sure you don't void your warrantee.
    Hope you get things figured out.
    John

Maybe you are looking for