AirPlay and Remote no longer working after 6.1 update.

After updating my Apple TV to iOS 6.1 I am no longer able to connect to it via AirPlay (from iPad or iTunes) or even control it with Remote.app on my iPad.
After hard restarting it (by unplugging it) I am able to, until it goes to sleep, after which it becomes unreacheable, and remains so even after being awoken by the physical Apple remote.
What is going on?
Please fix this soon, Apple!

Same issue...
Just updated my iPhone 5 this morning, and then whilst out I bought the latest AppleTV (only so I'd get AirPlay compatibility). Brought it home and updated it.
Note I've made sure ATV & iPhone are on the same WiFi network. Have enabled sharing on my MacBook iTunes (not that I'm sure you need this for airplay). I terms of trying air play from MacBook to ATV I haven't found out a way to do this yet, however it might be because I've never done it before and haven't found the write button to click...
Then I could NOT work out how to get airplay working in any form from my iPhone to ATV. Also tried AppleRemote IOS app as I noted an update came through but I haven't got that working either.
Will monitor this thread and hopefully someone can give advice/workaround.

Similar Messages

HT6114 My double clicks no longer work after doing this update. What happened?

Double clicks in iPhoto no longer work after doing the update. Trying to troubleshoot, but feeling dense in that I can't get this thing to work. Any suggestions, please?

Try this thread > https://discussions.apple.com/message/23317566#23317566

Apogee Jam No longer working after 1.1 update?

My apogee jam is no longer working after updating to Garageband 1.1. I have an Ipad 2 with firmware 4.3.3.
Specifically what happens is:
1. I open the garageband app
2. I select the guitar amp
3. I plug the Jam chord into Ipad (guitar is already connected to cord)
4. Jam light goes green, blue, bright green then green
When Jam light goes bright green, the monitor button in garageband goes dim and doesn't work.
I've tried plugging my guitar in first, then starting garageband, no difference in results.
I have tried turning the monitor "on" prior to pluging in the jam, when I do this the monitor/sound gate window stays open until the Jam bright green goes on, then it disappears and the monitor button goes dim.
Outside the garageband app, the ipad does recognize the Jam in settings, general.
What's worse (for me...) is that I backed up the Ipad in itunes thinking that app data would also be backed up (as I read that in a description of backup). I then deleted garageband from the ipad and then restored it from itunes. Guess what, lost all my songs... Bummed out... Why wouldn't my songs be backed up???
Anyway, any ideas on the Jam issue would be greatly appreciated. I'm hoping I am just overlooking a setting?

Unfortunately, I don't believe that Apple keeps prior versions of Apps available at the store. GB was the first app I purchased there day one of my Ipad, incredibly worth the $, and I did actually look to see if you could go back legitimately.This is just one of the many reasons to JBreak your devices, so that you can go backward if you need to. This is a perfect example of why Apple should make prior versions available, but they think they know it all and never make mistakes, so that will never happen. Again, this is why folks take things into their own hands and why the scene exists. There are plenty of abuses, more than not IMO, but here is a perfect example of how people are screwed and can't use their Jams any longer without a JBroken device. They obviously know that this issue exists, they have employees on these forums. It will be months if ever they fix this issue, because the number of owners of Jam, although in the thousands, is small potatoes compared to the Apple owner universe. I believe it will only be fixed if Apogee is able to put enough pressure on Apple. If you see the Jam removed from the Apple store and GB site you know that Apple is choosing not to fix it, because they won't sell or promote it directly and then have to deal with complaints and returns. But even this will happen slowly...
Actually it occurs to me that Apogee may have to redesign the Jam AGAIN in order to get it working with 1.1 on Ipad 2 and Iphone 4s (devices with the newer processor). I wonder if they will recall or replace the Jams for people who now have Jams not compatible with Garageband. Again, Apple should be posting a warning for Jam owners on the Garageband download page, but that will never happen because Apple doesn't care about small potatoes.
Message was edited by: Rickd3333
Message was edited by: Rickd3333

Apps no longer work after installing ipad2 update 4.3.5

Apps no longer work after installing IPad 2 update 4.3.5

i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

Autofill no longer works after recent Firefox update

The Auto-fill function on google toolbar no longer works ever since I updated to newest Firefox

See this for support information about the Google Toolbar.
[http://www.google.com/support/toolbar/?hl=en]
Or visit the Google Toolbar forum.
[http://www.google.com/support/forum/p/Toolbar?hl=en]

Airport Express relay and remote no longer work

After upgrading to Snow Leopard 10.6.4 from Tiger 10.4.11, my two Airport Express units (one relay, one remote) will no longer work. My Airport Extreme Base unit is fine, and our desktops and laptops still connect to the wireless. However, I want to be able to use the Express units to extend our wireless through the rest of the house and play iTunes, as I did before upgrading.
I have spent days trying to fix this, and I have probably worn out the hard reset by now. I have checked to see if I need any updates, but my screen assures my I am fine. The two express units are sometimes recognized by the Airport Utility, sometimes not. Usually when I try to do a manual set-up, I am told that an error occurred with the configuration for the Express unit.
Any advice/sympathy is appreciated. If I can't fix this, I guess I have two semi-expensive paperweights. Bear in mind, I love my Macs and Apple products in general, but right now, the whole thing is reminding me of Dell ****.

Any advice out there? I've even taken bypassed my main Extreme base to plug the ethernet connection directly into the Mac desktop to do software updates that might have been missed by going through the Extreme and wifi. While it did install one security update, it didn't affect the Express units.
I'm wondering about firmware. I have checked over and over for software updates, and my system assures me that everything is up to date. However, I'm concerned that somehow I'm missing a firmware update. My Airport Utility tells me my Extreme is running on Version 5.7, and on the few times one of the Express units shows up, it shows as running Version 6.#.
Do I need to manually install a firmware update, and if so, how? I terrified that I will mess up the ONE wifi unit that is functioning.
Ironically, my Extreme base is the oldest in my batch-both of the Express units are newer than it.

Keyboard and Mouse no longer work after update

Earlier today I ran pacman -Syu for the first time since the 18th, and initially everything seemed to be working properly. However, upon my next boot, both my mouse and keyboard (both USB) no longer worked, leaving me stuck at the login screen unable to move the cursor or switch to a different terminal. Unplugging and reconnecting my keyboard and mouse did nothing.
A related topic (which could be solved by reconnecting the devices) suggested that booting with runlevel 1 might help, and this allowed me to use the terminal, but any attempt to start X resulted in getting stuck at login in the same way.
Disabling and re-enabling hotplugging via xorg.conf had no impact (there was a note in Xorg.0.log indicating that since hotplugging was enabled, mouse and keyboard drivers were being disabled. Apparently it's a fairly standard warning).
The only package that was updated that seemed to be input related was xf86-xinput, but downgrading to the previous version did not fix the problem.
Does anyone have any ideas as to what might have caused this issue?
Thanks for any help you can provide.

Adding to the above: I also tried plugging in an Microsoft USB keyboard at the point when Windows freezes at the Windows log-in screen. The keyboard is not recognized and the only way I can leave this screen is to power-off the computer.

Camera and led light not working after IOS 7 update on iphone 5 help please!!

After I installed the update my led light won't work for the flashlight and my camera doesn't work either. Only the front facing camera works. Any suggestions?

thanks for the suggestions, i tried the ideas you suggested but i dont even get a camera showing for the rear camera, i also noticed the torchlight no longer works. i did all the steps but no luck.
So I took my camera to the genius bar this weekend as well as walking through various steps with the apple guys in ohio support over the net.
With the guys at the genius bar, after i insisted that it must be software as the rear camera stopped working only after the softwre update, they continued to assure me it was hardware and talked me into letting them replace the camera, they then took it to the back and tried fixing a camera and 30 minutes later came out and said the rear camera is no longer being detected and wanted me to replace the motherboard for yet more money. im glad they didnt charge me for the new camera though as it still didnt work.
anyway the motherboard idea i rejected as it was just 2 months out of warranty and had only stopped working the day after the release of 7.0.2, so im going to wait until the next few releases to see what happens, as i dont believe for a second its hardware. i expected a stock answer from apple and its exactly what i got even after my explanation of how it was working the day before the release. not overly impressed with the whole process.
i wanted to back down to 7.0.1 to confirm the camera still works but they said no chance so i cant even see if it still works ouside 7.0.2. anyway will update if i get any further progress.

Onboard Mac Lan no longer works after 1.9 update!!!

I was using bios v1.8 and both my Mac Lan and my Giga Lan were working perfectly fine. Now that i updated to v1.9 my Mac Lan no longer works but my Giga is fine!!!
My Mac Lan still gets an ip address from my router, but i cannot ping the router nor anyone else on the network and my internet does not work!! So right now im using my Giga lan but i want my other one working like it was.
I tried going BACK to v1.8 but it did not fix the problem, so i went back yet again to v1.9 and im still left with the same problem. Ive tired disabling it and re-enabling it in both the bios and in windows and still nothing. Ive also tried re-installing the drivers and that did not work either. I even ran a Winsock Fix but that didn't fix the problem either.
Is anyone else having this problem besides me? what can i do to fix it???

Download new bios and extract it to a directory where you can find it (root of c:\ if you are lazy like me). Run wminfo if you are paranoid about losing your mac address and copy it down for your nvidia adapter.
Restart windows in safe mode. Close every application down in task manager.
Run winflash as described below and CHECK ALL THE RIGHT BOXES TO UPDATE BOOTBLOCK AND TO CLEAR THY CMOS. Read Syar's description below as that is what I used:
Quote from: syar2003 on 30-July-05, 00:24:48
No , floppy flash is not neccesary !
Can use
C:\Program Files\MSI\Live Update 3\FlashUty\Award
winflash.exe
Place checkmarks on bootblock/dmi area/update all/clear cmos
During flashing you see it will verify the programming of the bios chip .
And the good thing is unlike dos flash you can redo it if it fails , just by starting taskmanager and kill winflash.exe
and start over (as long as the machine isn't powered down or restarted).
I always say no after the flashing when asked to restart , exit the winflash utility , make a normal shutdown , turn off PSU for 10 seconds , then turn back
on , enter bios and load optimized default , followed by a boot to build/update dmi pool .
Kill all unwanted apps in the systemtray before running winflash and dont have any other applications running .
Best way is to boot to windows safemode .

SCIM no longer works after last package update

I just did the usual
sudo pacman -Syu
and now SCIM Pinyin chinese input no longer works:
When I press the hot key to enable chinese input, it only shows "English/European" in the notification bar that pops up, and I cannot enter chinese characters. Also after activating the hotkey, the backspace key suddenly no longer works anymore, until I disable SCIM again by pressing the hot key once more.

Thank you, actually it worked again after a reboot. (No idea why.)
I reboot this PC very very rarely, it's not supposed to be rebooted.
Last edited by mir91 (2014-07-10 02:00:07)

Synchronize By Audio No Longer Works After 7.2 Update

After installing the Premiere Pro CC 7.2 update, the synchronize by audio no longer works correctly. When you highlight the clips and sync by audio it acts like it's doing something but then puts the clips nowhere near close being a match (usually one clip on one side of the timeline and the one on the other).
Is anyone else having this issue? I've run into it on two seperate computers bothe running Premiere Pro CC 7.2 on Windows 8.1 machines.
- Dennis

Bumping this. I'm a brand new CC subscriber and the sync function was a big part of why I moved to CC. 50% of the time it works, but the rest of the time, it pushes the video clip much farther down the timeline.
Update 1: To clarify, I am doing this from the sequence itself. So tracks A1/V1 are the original audio/video from camera, then A2 is my sound I want to sync.
It does not seem to have a problem syncing the same "problem" clips when I use the "Merge" by Audio from the Bin.
Update 2: I found that, if I unlink the original A1/V1 clip, then select all three (A1/V1/A2) and Synchronize, it works.
Obviously, this is an unacceptable workflow, but I hope that helps Adobe figure out what's going on here.

Speakers no longer work after Mountain Lion update.

After my update of Mountain Lion my speakers in my macbook pro no longer work. The speaker symbol is grey and the volume can't be moved. Anyone else have this issue?

Seems there is no real solution to this problem. If you have a time machine backup you can go back to 10.7.2.
Since I did the clean install of 10.7.2, I don't have any audio problems. My MacBook Pro now runs smoothly. I guess I stick with 10.7.2 until 10.7.4 is released.
You can also try some of these suggstions: https://discussions.apple.com/thread/3705456?start=15&tstart=0
Hope you get your audio working.
AJ

POP Accounts no longer working after 3.0 Update?

Before I upgraded to version 3.0 of the OS, I had two POP3 email addresses set up on it, they are still there but no longer work (download or send) nothing in the settings has changed from pre 3.0
Anyone else experienced this problem? Anyone got a solution?
My .Mac/MobileMe accounts are working as normal BTW....

Delete and re-install them.

Capacitive keys no longer working after windows 10 update

greetings
i updated my Nokia Lumia 520 , from windows 8.1 to windows 10, but the windows ,and the back capacitive buttons are no longer working, however the search button is responding. since these are the main navigation keys, i cnt do anything to use my phone
please help

Best to read this > Apple apparently kills Windows PC support in Safari 6.0
You're better off using IE or Chrome.

Wifi on A1427 is no longer working after 7.2 update.

I have model A1427 Apple TV. Once I updated to 7.2 the wifi no longer works. It will not search and find any networks. If I use the Ethernet cable it works fine. Any suggestions? Solutions? I have restored and restarted the device multiple times.

Apple is not here, and downgrading is not supported for a variety of reasons including security updates.
Your device is only 3 weeks old. Take it to the Apple Store and have it looked at.
Provide any feedback you wish to at:
Apple - Feedback
Cheers,
GB

AirPlay and Remote no longer working after 6.1 update.

Similar Messages

Maybe you are looking for