Airplay - Apple TV not visible after upgrade to iOS 8.2

I upgraded my iPhone 6 Plus to iOS 8.2 and Apple TV 2G to the latest update. Now I cannot see Apple TV under Airplay. I made sure that I am on the same Wifi.
Please help.
Niket

Hello Niket,
Sorry to hear that you are not able to get your iPhone to see your Apple TV. Take a look at the article below for some general troubleshooting to get it to show back up on your iPhone. Let me know if this works or if you are still having issues. 
Get help using AirPlay and AirPlay Mirroring on your iPhone, iPad, or iPod touch
https://support.apple.com/en-us/HT204291
Regards,
-Norm G.  

Similar Messages

  • Airplay on Apple TV not working after upgrading to iOS 8 (3rd Party Apps)

    Hi
    I hope someone can help me with this issue.
    After upgrading the iPhone 5 and iPad 2 to iOS 8.1, as well as upgrading the Apple TV to the latest version, I now end up with ** some ** videos as well as photos that can't be played over AirPlay on 3rd Party Apps. (Note: I have no issues with 'mirroring' from the iPad to the AppleTV though.)
    1.   It can play .mp4 and .mov files;
    2.   It could NOT play .mkv or .avi files - there's audio but NO video
    3.   It can play the photos and videos from Apple's own apps (i.e. 'Videos' and 'Photos') however (i.e. with both audio and video)
    4.   It could NOT display any photos from 3rd Party Apps
    5.   This is happening to more than one 3rd Party Apps (i.e. no display of photos; and no video though there's audio)
    Fyi, I've emailed to the respective Developers, but after reading some of the threads in this forum, I suspect that the root cause could be with iOS 8 (as well as the latest software update to AppleTV) as I didn't have this problem at all under iOS 7.
    Anybody has any solution?
    Thanks in advance.
    Thim Fook, Law

    Hello Niket,
    Sorry to hear that you are not able to get your iPhone to see your Apple TV. Take a look at the article below for some general troubleshooting to get it to show back up on your iPhone. Let me know if this works or if you are still having issues. 
    Get help using AirPlay and AirPlay Mirroring on your iPhone, iPad, or iPod touch
    https://support.apple.com/en-us/HT204291
    Regards,
    -Norm G.  

  • IPhone Home Button not working after upgrade to ios 5.1.1

    Hey everyone,
    I'm pretty sure this is a software failure due to the symtoms the iPhone is showing;
    0 - the home button does not work at all when the phone is turned on and running ios 5.1.1, well it used to work okay when i had ios 5.0.1, I upgraded to 5.1.0 and started working randomly, upgraded to 5.1.1 to see if it was fixed with no luck at all.
    1 - When locked the screen does sometime light up, like when you press the home button and don't slide the unlock button. but it does not exit apps anytime, I mean it doesn't act like it's pressing the home button randomly but only when the phone is locked.
    2- The button does work perfectly when iOS is not running: I can get in and get out of recovery and dfu mode at will, that wouldn't be possible if the button were broke.
    3- what else? Oh yea, not really a symtom: Tried the 'home button calibration' several times.
    4 - It's not filthy, since I really cleaned it thoroughly with a powerful tiny nozed air blower I got and gave a rubbing alcohol treatment too.
    5 - when I shut the phone down it instantly turns back on, I can interrupt the turning on for turning the phone into dfu mode (i'm sure It's in DFU mode because the tinyumbrella log monitor tells me)
    I'm now using the 'soft' home button that goes in the accesibility options, but hey, I didn't pay a ton of money for a phone that the same Apple is gonna break down.
    It's out of warranty and I don't have apple stores where I live.
    I'd downgrade to 5.0.1 in a snap if I could but I'm not into jailbreaking, so the shsh blob thingie is not a possibility.
    Any apple dev around that can give me a workaround?
    thanks a lot in advance
    Added more info ~ 

    I had the same problem with Home button not responding after upgrading from iOS 5.1 to iOS 5.1.1 on an iPhone4.   I solved it but not sure exactly what fixed it.   Here is what I did.
    1.  Took it local Apple store Genius appointment.   They used a special tool and took some lint out of the connector opening.   The Home button started working.   They said even though the phone was out of warranty, I could buy a new replacement one without a contract for $150. 
    2.   The Home button stopped working when I got home.   I got some compressed air in a can and blew the air through the connector to try and clean out more dust.   I now keep the phone with the connector opening facing down in my pocket.   I also struck the phone downward on my hand or other soft surface to force as much dust out as possible.
    3.  The Home button still was intermittent.  I then tried to do a hard reset by holding the power on key and the Home button simultaneously for about 10 seconds.  This doesn't work if the Home button doesn't respond.
    4.  I connected the iphone to Itunes via the USB to sync the phone.  While connected, I did a Hard Reset by Holding the Power button and Home button simultaneously.  I noticed the Home button responded better when connected to ITUNES via the USB.
    5.  I did a backup of the iphone4 by highlighting the iphone 4 while connected to ITunes and right mouse click and selecting BACKUP.    I was prepared to reset my phone4 in iTUNES and restore it from the backup.
    The phone worked consistently before I had to do this.
    6.  As a last resort which I didn't need to do, I was going to copy all my settings for the iphone by selecting the phone in iTUNES and looking at all the sync settings.   I would then have restored the iphone to original factory settings and then sync the phone using the copied settings.  This would have made sure that the backup didn't include the bug.
    Fortunately, I didn't have to do step 5 and 6.   Things started working after Step 4.  So I don't really know if it was the iOS 5.1.1 upgrade or pure coincidence that the Home button stopped working immediately after the upgrade.

  • My iPhone 4 can not reboot after upgrading to iOS 6; keeps trying and cannot shut off either.

    My iPhone 4 can not reboot after upgrading to iOS 6; keeps trying and cannot shut off either.

    I FINALLY got it to work on BOTH iPhone 4 and iPpad 3.  Here is what I had to do:
    Had to DELETE all e-mail accounts including icloud.
    Did a hard reset (hold down button on top right corner and round button on bottom center)
    Then once it came back on, the iPhone had ALL of the accounts still on it and it was receivng e-mail.
    The iPad receive e-mail until I did the steps above 5 times.  Plus, I had to add back all of the e-mail accounts vs. on the iPhone 4 they were there when my phone came on.
    Now I am receiving e-mail on both devices normally.
    No clue why this happened, but Apple needs to find a fix ASAP.

  • I am using Iphone 4 (not 4s) After upgrading to ios 5.0.1. is blocking. I live in Venezuela

    I am using Iphone 4 (not 4s) After upgrading to ios 5.0.1. is blocking. I live in Venezuela

    Without more information, I have to say it sounds like the phone you have was not legitimately unlocked, but had been hacked. Updating iOS will re-lock it to the original carrier.
    ONLY the carrier it is locked to can authorize unlocking it.
    Where did you get the phone?

  • IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

    iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

    I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

  • Hdmi adapter not working after upgrade to iOS 8

    My Hdmi adapter (orig. Apple) is not working anymore after upgrade to iOS 8, is there any solution.

    The IOS 8 update has nothing to do with the failure of the device. I have a HDMI adapter and it has worked fine through IOS 6, IOS 7 and IOS 8.
    You may want to restart your device by holding the home and power button until the Apple logo appears. If the adapter still fails to work you need to determine if the adapter has failed or the port on your device has failed. Best solution is to go to the Apple store with the device and the adapter. If your adapter has failed it may be under warranty if you still have the sales receipt. If the port on your device is bad then the Apple store will be able to provide you with options.

  • IPhone Bluetooth not working after upgrading to iOS 6.1.2

    I used to pair my iPhone with my Blue&Me system in my Fiat Car and it was working perfectly hitherto. Recently I have been experiencing problems with Pairing my phone with my car Bluetooth system (Which I sometimes use for receiving calls).. The phone though identifies the car system in the discovery mode but is not able to pair  and establish connection. My car Bluetooth system is working just fine with other phones. Request apple / or anyone who can help to help me overcome this issue. My car system is as important to me as iPhone and if this problem persists, i may be forced to change my phone.

    In the 4+ years of using iPhone and several other apple products, this is the first time that I am feeling frustrated with my iPhone 4S and Apple. I am surprised that so many people around the world are facing the problem with their blue tooth devices after upgrading the iOS and still there is no hope of having this situation resolved. The cause of breakage of communication between iPhone (my investment, my ownership) and other devices is of apple origin and apple can't walk away by suggesting that the other party should upgrade the Bluetooth Firmware.
    In my case, My iPhone 4S stopped paring with My Fiat car blue&me system after updating to iOS 6.1.2. The problem has not been solved in iOS 6.1.3.
    If this problem is not solved in next update the ovious solution is to move to android as I can change my phone but I can't change my car that eaisly.

  • My photos are not displaying after upgrade to iOS 7, My photos are not displaying after upgrade to iOS 7

    On our ipad 2, after upgrading to iOS 7, the photo album is completely screwed, and the saved photos are not displaying correctly. How do we get our photos Back?

    OK, tried the reset and it seems to have cleared up some problems; however, the picture problem remains.
    Maybe there is something further we could do in settings? My wife uses the iPad as her constant companion and likes to take screen shots (pictures) of recipes and such. She keeps them in albums. Before the update to iOS 7 they all displayed correctly regardless of physical machine orientation. Now, post update, when in landscape mode, which she uses 99.9% of the time, her pics do do fully display. By physically rotating the machine, they will appear correctly. We have noticed that there is a new "function" in edit pics for "aspect ratio."
    Should we be using this? If so, she'll have to edit a very large number of pics. So I'm wondering if we're missing some new setting. BTW- this display problem also occurs with pics taken with the camera as well.

  • Some Of My Apps Do Not Work After Upgrading To iOS 4 And Fluctuating Wi-Fi

    After upgrading to iOS 4 on my 8GB iPod Touch, some of my audio apps do not work. CBS Radio just crashes, ESPN Radio stays on the "Station ESPN Radio data loaded" screen, and the iRadioSuite stays on "Connecting". Sirius/XM Online, iheart radio, Radio, and WunderRadio appear to work correctly. Also, I always had three bars for wi-fi signal strength on my home network before the upgrade. Now I get fluctuating levels that at times go down to two bars and even one bar. Needless to say, this is very frustrating!

    I also updated the iPhone 3G yesterday to iOS 4. I just turned on wi-fi on the iPhone. CBS Radio crashed on the iPhone but I got a steady three bar wi-fi signal strength level as I moved around the condo so this must be an 8GB iPod Touch and iOS 4 interface issue.

  • Apple mail not working after upgrading to maverics

    I installed maverics on my mac a couple months ago. I noticed that all of my accounts in apple mail  have not worked properly since. first of all, i cant tell if mail is retrieving my email anymore. there used to be a spiral next to the account letting me know that it was checking and now there is no indicator that it is working or not. many times my mail is delayed hours as I can see from the time that mail gets my email vs when my gmail or other account actually gets it.
    sometimes apple mail says that the accounts are not connected to the internet but my wifi is fine. after trouble shooting the network settings i can get it to work but what a pain. Is there a way to reset my apple mail settings or my network settings to make apple mail work like it did before maverics? Please help. My mac info is below:
    osx 10.9.1
    processor: 2.5 ghz core i5
    memory: 4gb 1333 mhz ddr3
    mac hd
    any help is appreciated thanks

    Hi orinbe,
    Thanks for visiting Apple Support Communities.
    See the steps in this article for help if you are not able to send or receive email after upgrading:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Cheers,
    Jeremy

  • Apple apps on Apple TV not working after upgrade

    Apple TV after upgrade  the apple specific apps like movie TV music and others do not work. Netflix, vimeo, Flickr seems  to be working - I even restarted the Apple TV (720). Any work arounds ?

    Turn your camera on, now put your finger on the screen and swipe downwards till video lights up.

  • Animated gif in mail are not visible after upgrade to mavericks

    Hi,
    I use a animated gif in my signature in mail. This gif was playing normally (like a animated gif) in mountain lion when I writes a new message. After upgrading to mavericks I can't see the animated gif playing. I just see the first frame. However when I send a mail to my iPad using iOS 7 the animated gif is playing normally.
    Thanx for every answer!

    I'm having this issue as well — I can no longer send animated gifs in Mail with Mavericks (10.9.0). The image retains its full image size and remains a gif format, but does not play, just sits static. This also affects forwarding animated gifs — which play fine in the mail window — they are static in the compose window and are sent static.

  • Newbe Apple user here.  After upgrade to iOS 5.0.1, apps backed up on my Desktop computer are not appearing back on my iPAD.  How can I get IPAD to get all my from computer?

    I managed to sync my iPAD to my home computer, update everything and backed it all up (or so I thought).
    However, after finishing the iOS upgarde from 4.3 to 5.0.1, most of my apps and tools, all my books and manuals and games  - everyting I purchased and most of what was free, is missing from the iPad.    I can still see it on my home computer.  
    Is there such a thing as a reverse sync where you get your stuff from your computer back on the iPAD, and can someone please point me to some information on this process, or even just give some basic steps? 
    I am not a savy apple user, and appreciate your help.
    Thank you kindly,
    - Ms. KT Gates-Waldrup

    iPad User Guide (For iOS 5.0 Software)
    The backup that itunes performs does not include any itunes content.
    If the content is on your computer, then sync it to the ipad.  Instructions in the manual.

  • Account Assignment data in Shopping Cart not visible after upgrade of  R/3

    Hello,
    We are currently working with SRM 5.0 and R/3 4.6 Backend system.
    We are now upgrading our R/3 system from version 4.6C to ECC 6.0.
    When we try to create a shopping cart, the account assignment Tab is not visible.
    We checked the RFC (SRM-R/3 and R/3-SRM) and they our working fine.
    Now we think the problem is caused by a configuration setting in which one defines the Backend System. In this configuration, the system category is still set to 4.6C (for the logical System of the Backend System)
    We want to change this but in our list of system categories, the ECC 6.0 option is not present!
    Questions:
    1. Is this configuration setting the cause for our account assignment tab problem?
    2. How can one add the System Category ECC 6.0 so it will appear in the configuration setting "Specify Backend System" ?
    Anyone had experience with this? Please give us a clue.
    Thanks in advance.
    Aart

    Hello Aart,
    You can choose the ERP_2.0 option. It contains the correct structures for the new ECC 6.0 system.                                             
    You can change it and retest.
    Kind regards,
    Ricardo

Maybe you are looking for

  • How do I delete an Apple ID account. I apparently have 2 IDs associated with one email address.

    how do I delete an Apple ID account. I apparently have 2 IDs associated with one email address.

  • NW Upgrade best practice

    Hi We will be upgrading our WAS 6.40 (and EP6) patch level from 17 to 21 and I want some advice as to which stage in the process would be ideal to upgrade NWDS from 17 to 21. By which stage, I would mean, at the end of the production upgrade, or when

  • How to use API to trigger JAM group invitation in ABAP coding?

    Hi, We want to trigger a JAM group invitation URL to be sent out in ABAP coding to enable a auto. process at backend. Currently I only know the manual way: clicking invite button in jam group and input user name to find target user and then click sen

  • HP LaserJet P3005dn not duplexing after update

    We have a user who, after installing the latest (v. 2.7) HP Printer Drivers, can no longer print to an HP P3005dn printer and use the duplexing feature. The Duplex box is greyed out when they try to select it. Previously they were able to print using

  • Delete attribute with objectclass=nstombstone

    Hello, I changed the replcation ID of one server in a three-way multimaster configuration, and found that the original value of the ruv is still exists in the search result of objectclass=nstombstone. That is there should be value of the replica ID o