Airplay Connection issues - An error occurred while connecting to the AirPlay device "x". The network connection failed.

I recently upgraded to a new MacBook Pro running Mountain Lion, and got my Airport Express (802.11g) out of the closet and set up an AirPlay network for my speakers.
All worked well for the first while, but recently I've been having an inconsistent problem with this: "An error occurred while connecting to the AirPlay device “my network name”. The network connection failed."
Since it came up, more often than not, I can't connect.
I can play without issue from my iPhone, and from my iPad.
I looked around these forums, and found a couple threads dealing with this from 2011, with no clear resolution to them. No one with Mountain Lion seems to complain about it, though a few people mused about whether Mountain Lion might fix the problem.
I'm running iTunes 10.7(21), and don't recall doing any upgrades to it that might have brought this about, though I can't say for sure.
My Airport Express is updated to firmware version 6.3, which I believe is the last one issued for the 'g' Airport Express.
My wireless network runs off an Airport Extreme 802.11n (Second Generation) with verion 7.6.1 firmware.
My Mac has 10.8.2 on it right now.
Hopefully some of that info might help sort this out - any replies greatly appreciated!

One quick update. A workaround that was mentioned in one post did seem to work - if music is started via the Remote app it seems to connect fine.
And I'm not sure if I dare upgrade to iTunes 11 given the firestorm of bad impressions I see, including some that relate to Airplay functions...

Similar Messages

Error message, what does this mean: Itunes couldnt connect because an error occured while reading from the devise?!?!?! HELP

I'm trying to connect my iPAD to my desktop but I receive an error: itunes couldnt connect because an error occured while reading from the devise?!?!?! HELP

have you done a update for your itunes this can be the problem that it will not connect to you ipad so update you itunes and then try it again

An error occurred while reconnecting P: to \\JSERVER\Data Microsoft Windows Network: The network path was not found. This connection has not been restored.

Almost every day when I open my computer I get this message:
An error occurred while reconnecting P: to \ \ JSERVER\data Microsoft Windows Network: The network path was not found. This connection has not been restored.
We then have to go through the process of resetting everything from start to finish just so I can connect to the server. There is no reason that we can find that causes this other than maybe windows updating every night. Any suggestions as to how to
fix this?

it sounds like you have a network drive you are trying to map even though you are not logged in maybe in a script or task instead of backing up to :P backup to the share, make sure you have security set properly to run the task when not logged on.
I assume you are running a backup of some sort as this is the backup forum..

An error occured while conecting to an airplay device uknown error -15000

I have recieveesd this message while trying to stream music through air play from my PC to the apply TV.
"an error occured while conecting to an airplay device uknown error -15000"
Movies are streaming fine, but I get this message when I try to send music to the apple tv. I have enable music sharing in my preferences. I updated my itunes today on 12/26/12. Any help is appreciated.
An additional note, I have an updated iphon 4s and airplay functions fine when sending music to the apple TV. It only replies with this error when I am comcecting through itunes on my computer.

Welcome to the Apple community.
Have you tried restarting the Apple TV, the iPad/iPhone and your router.

A fatal error occurred while creating an SSL client credential. The internal error state is 10011.

Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
Rich

Hi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

A fatal error occurred while creating an SSL client credential. The internal error state is 10013.

Hi All
I am seeing the below event appearing in the system log on all our Exchange 2013 servers regularly. I am not seeing any connectivity issues between any clients and the servers and no other issues have been reported at this stage.
Log Name:      System
Source:        Schannel
Date:          10/04/2015 9:21:17 AM
Event ID:      36871
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:
Description:
A fatal error occurred while creating an SSL client credential. The internal error state is 10013.
I am not sure if its related to the public certificate we are using or if its related to the one provided from the local CA.I have searched and found other links that suggest it could be related to SSL versions being disabled etc.
All servers are running Windows 2012 R2 Datacenter. The Exchange CAS servers do also sit behind a pair of F5 BIG IP Load Balancers
Any suggestions on where to look?
Thanks

Hi,
According to the event log, the issue is related to Schannel instead of Exchange.
Please try the following steps:
1.In Control Panel, click Administrative Tools, and then double-click Local Security Policy.
2.In Local Security Settings, expand Local Policies, and then click Security Options.
3.Under Policy in the right pane, double-click System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing, and then click Enabled.
4. Ran gpupdate /force
If it doesn’t work, please go to C:\ProgramData\Microsoft\Crypto\RSA and grant "Network Services" Read permission to "MachineKeys" folder. Then restart server to have a try.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/lync/en-US/e70a8dbc-6f48-4fde-a93b-783554344822/a-fatal-error-occurred-when-attempting-to-access-the-ssl-client-credential-private-key?forum=ocscertificates
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

HT3275 I keep getting the "Unable to complete backup. An error occurred while copying files to backup volume. The solution on the website is try try again. Its been trying for 5 days now. Now what? Obviously something else needs to be done.

I'm using an airport extreme and I keep getting the "Unable to complete backup. An error occurred while copying files to backup volume. The solution on the website is try try again. Its been trying for 5 days now. Now what? Obviously something else needs to be done.

Verify the backup.
Is this TM you are using? TM to airport extreme connected hard disk are known to be fragile at best.
A5 http://pondini.org/TM/Troubleshooting.html
make sure the disk is available and online..
But if it is not working.. then you will have to wipe and start again.
http://pondini.org/TM/Airport.html
If this is not TM then also verify the source disk.

An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified

Hello All
I have TMG server installed on windows 2008 R2 64x with 3 network adaptor (Lan,Premiter and External), but for some reason the clients on premiter Network cant get ip addresses from dhcp which located on LAN. i have done
ipconfig /release
ipconfig /flushdns
ipconfig /renew
but no success...... also uninstalled premiter network adaptor and reinstall network adaptor still no success.....getting this error.
An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified
by the way My Lab is based on Hyper-v
any help would be much greatfull
thanks

Hi,
Have you checked the TMG logging?
You could try the troubleshooting steps in the thread below.
http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/an-error-occurred-while-releasing-interface/4261cacb-e924-4d74-a349-4f3b898c27a9
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Permissions issue: An error occurred while trying to save your photo librar

I recently upgraded from a Mac mini running OS X 10.4.10 (iPhoto 08) to an iMac Core2Duo (2.4ghz) running Leopard (and also iPhoto 08).
My iPhoto library resided on an external Firewire drive when running on the Mac mini, but now that the iMac has such a large hard disk (750gb), I wanted to move my library there. I copied the library over to the Pictures folder in my user folder on the iMac and started up iPhoto, and everything seemed fine.
When iPhoto is running for any length of time, I get the following error:
*An error occurred while trying to save your photo library.*
*Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library.*
(I have over 300gb available on the disk and my library folder is approximately 40gb.)
I've repaired the permissions on the library using iPhoto's built-in mechanism (command-option while booting iPhoto) and Disk Utility. Additionally, I've used BatchMod to give my user and group full read/write/delete permissions (as posted elsewhere in the forums), but I still get the error.
Searching the forums yields other users w/ the same issues. What's the scoop? TIA!

Sean:
I just had the very same problem when I was messing with permissions and reset my unknown group to staff. I lost all write permissions in my nome folder. Here's how you can reset it for your pictures folder:
In the Terminal type in "sudo chmod -R -N " (there's a space after the N) and drag the Pictures folder into the Terminal window. Then hit the enter key. It should chug along for a couple of seconds and return a new prompt. Give iPhoto another try after that.
I had to do that for my entire home folder and it fixed the problem.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

"An error occurred while trying to add a frame to the movie" (-2014)

Oh c'mon. I just got everything installed. First time i try to use it, and get an error. Anyone help? I tried researchin this but didn't really get concrete answers. Plus, if i try to import livetype file unrendered from fce, fce quits unexpectedly.

Please, any ideas? i have a intel core 2 duo, 10.6.2 macbook, and PCI graphics card. Plenty of memory. Livetype version is 1.2.1. Is this type not compatible?

WebAnalysis Error: Error occured while opening document. Document ID = {0}

Hi Experts,
I am having an issue while opening a web analysis dashboard report. When I try opening it, web analysis runs for about 15 mins & then throws following error:
Error occured while opening document. Document ID = {0}
The report opens with its header having company log & two buttons, but data grid remains empty.
Kindly suggest me any way to resolve it.
Thanks,
Krishan

Hi Natesh,
Thanks for your reply to my query posted in this forum. Please find my inline answers between asterisk to your questions:
Whatz the source of your Grid? Relational SQL Query (OR) A spreadsheet with Essbase database connection file?
* Yes, the source is Essbase.*
If source is Essbase, it seems- Outline might've got altered when you're trying to refresh the report.
* The outline was in tandem when we tried running this report in WebAnalysis. This outline & WebAnalysis report which is in Dev Server is a replica of the one in Test Server where it runs fine. *
If source is based on a Relational SQL query, chances are that- Query is no longer valid.
* NA as this statement is NOT applicable to our source.*
If it's Essbase, it's also likely that- It ran out of time while fetching the data from Essbase. You may try playing around with the parameters in Essbase.cfg file.
* This might be one of the causes, but I double checked the all the tunning parameters in Essbase.cfg file in place.*
Could you please through more observation on this issue. Let me know if any further information is needed!.
Thanks for your time.
Regards,
Krishan
Edited by: user10475612 on Nov 8, 2009 1:07 PM
Edited by: user10475612 on Nov 8, 2009 1:09 PM
Edited by: user10475612 on Nov 8, 2009 1:12 PM

Error occurred while saving document in Web Analysis Studio

We have encountered an issue when we tried to save a new report in Web Analysis. An error message box will prompt up displaying "Error occurred while saving document." (Please refer to the attached screenshots). Clicking the details button gives no response.
Originally we encountered this whilst creating a report with an SQL spreadsheet (JDBC connection tested successfully), which failed to save. Proceeding to test this saving a blank report also gave the same error message.
The report shows up in the Oracle view, however also produces an error when trying to open it. "Unable to perform request
Undefined exception encountered. Recommended Action: Contact your corporate technical support." (Please refer to the attached screenshots)
Web Analysis version 11.1.2.3.000.1175
Please advise on how to handle this case

Hi Soumya,
Thanks for your reply. I am already using the admin account which is given administrator provisioning under Reporting & Analysis. I have not had issues in the past of saving documents to the server location (e.g. with FR studio). Any ideas as to what else could cause this error? Thanks!

"error occurred while loading this content" ... ATV2 not even 24hrs old...

I just bought this ATV2. I am using AT&T internet with an EDGE250AEW wireless router and a Motorola modem.
I'm attempting to rent movies with my ATV2 and watch them. After a myriad of times of trying to just sign into my iTunes account via ATV2, I finally was able to rent a movie.
When I click on the movie to rent, I'll press "PLAY" and it will give me the message "error occurred while loading this content".
I realize my internet connection is slow (1.5M) so I am renting in SDef ... but that still shouldn't be preventing me from even being able to rent a movie.
I attempt to watch a movie preview ... and a 2 minute movie preview takes over 5 minutes to load ... and it wont start playing until it's completely loaded. Bollocks!
I have updated my software, I have rebooted, I have restarted, I have recycled ... no avail.
Is this a PORT opening issue? I dont know what is going on but it's REALLY frustrating to have a 100 dollar paper weight.
I AM able to use home sharing and watch movies from my Macbook iTunes to the ATV2 ... but rentals from the store via the ATV2 doesn't work.
help please

You are definitely NOT the only one here with this MAJOR issue: http://discussions.apple.com/thread.jspa?threadID=2615363
I have the same issue, and I have a 6MB AT&T Elite Pro DSL service that I have always had since purchasing my ATV2 in October. Never have I had these issues until the 4.2 update. Horrible software bug and it keeps coming back up. TV shows, movies, etc. No rhyme or reason. Some shows new, some old. Some movies HD, some SD. It is almost as if the Apple TV rolls a die and if I get an odd number, I get the error message. Even number, it plays through...
Why would Apple continue to release software updates that do not address these issues? We have to keep leaving Apple feedback on this issue that is big enough that over 13,000 views on their own message board confirm this problem since the 4.2 software update a few weeks ago...
Tell your friends: http://www.apple.com/feedback/appletv.html

An error occurred while executing a custom action:_PopulateUserRoles

I am trying to install Service Manager 2012 RTM onto a brand new server 2008r2. The purpose is to replace the other Data Management server that is giving me problems upgrading to service pack1. I go through the setup and connect to the SQL server and
the database that has my existing DM. I am using the same credentials and everything is the same. It goes all the way to the end and I get an error :
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this roll

After this error, I reran setup and used the domain admin account instead of the Service Manager Admins group I created in AD. The error did not happen again, but I did get the "Setup cannot complete - RollbackCleanup"
error. This was fixed by following this link: "http://www.cireson.com/scsm/scsm-an-error-occurred/" and this MS article: "http://support.microsoft.com/kb/922918/en-us".
These are the steps (I had to create the DWORD 32 bit):
Click Start, click Run, type regedit, and then click
OK.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:
On the Edit menu, point to
New, and then click DWORD Value.
Type ServicesPipeTimeout, and then press ENTER.
Right-click ServicesPipeTimeout, and then click Modify.
Click Decimal, type 60000, and then click
OK.
This value represents the time in milliseconds before a service times out.
Restart the computer.
Hope this helps!
BR,
Robert
Robert

AN ERROR OCCURRED WHILE OBTAINING DATABASE SCHEMAS sqlserver stored proc

I have used the documented Oracle procedures for building the necessary wsdl and xsd files for a sql server 2000 and 2005 stored proc. The wsdl files and xsd are generated and incorporated per the tech doc. The process was working for a while and now, when we try to access the dbadapter partner link created using the wsd, we get the following error:
"AN ERROR OCCURRED WHILE OBTAINING DATABASE SCHEMAS. VERIFY THAT THE DATABASE CONNECTION IS VALID AND IS SUPPORTED."
We have tried getting this corrected by using each of the specified jar libraries as part of the project:
sqljdbc.jar
msutil.jar
msbase.jar
mssqlserver.jar
Still, no solution.
Anybody have this happen? Fixes? Help......

If you used a command-line utility to generate your WSDL and XSD that would indicate that your JDev version does not support SQL Server so you can't use the Adapter Configuration Wizard to create partner links that execute stored procedures on SQL Server. Creating the initial partner link using the generated WSDL and XSD file will work fine, but if you try to edit that partner link in JDev it won't work if your JDev doesn't support SQL Server. You'll have to regenerate the WSDL and XSD as needed and recreate the partner link.

Airplay Connection issues - An error occurred while connecting to the AirPlay device "x". The network connection failed.

Similar Messages

Maybe you are looking for