Airplay disrupts transmission with Airport  Express 6.2 and OS X 10.8.3 Any fixes known?

Airplay disrupts transmission with Airport  Express 6.2 and OS X 10.8.3 Any fixes known?

Looks like this is a known issue which has been fixed for Java 8:
https://javafx-jira.kenai.com/browse/RT-23328 "Mac: Impossible to use -splash:<image> with JavaFX 2.2 and JDK 7"

Similar Messages

  • Problem with Airport Express (1st gen) and Mavericks?

    Hello,
    I still have an older 1st gen Airport Express (model A1264) and now with Mavericks it isn't working at all. The Airport Utility app on my Mac can't even find or connect with it. The same with the iOS app. It worked fine before. I can't even update the firmware (either no download available or other available downloads are too old and won't install). Is there a solution or do I need to update my whole device?
    Thanks,
    Paul

    As a last resort, try a factory default reset on the AirPort Express as follows:
    Power off the AirPort Express
    Wait a minute
    Hold in the reset button first, and keep holding it in for another 8-10 seconds while you simultaneously plug the Express back in to power
    Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light status
    On an iPhone or iPad home screen....
    Tap Settings
    Tap WiFi
    Look for a heading of Setup a New AirPort Base Station. If it appears.....
    Tap on AirPort Express just below the heading to start the configuration process on the Express again
    If you try several factory default resets, and the AirPort Express does not appear under the heading of Setup a New AirPort Base Station, the Express most likely is defective and will need to be replaced.

  • HT1145 Why is iOS 5.1 AirPlay not working with Airport Express

    Ive updated my iPad and iphone to iOS 5.1 and now AirPlay is not working with my Airport Exress set up.
    Can anyone help me out? I can't seem to resolve this and I'm an apple head

    I have the same problem from my Ipad 2 and my Iphone 4S trying to airplay to my Apple TV 2. i dont get any airplay button when playing photos or \video.
    All worked fine with IOS 5.0
    Whats going on?

  • Extending a time capsule with airport express twice

    Hi,
    I have been trying to extend my existing wireless network recently but it never ended up how I wished...
    I have one 4th generation Time Capsule (A1409) and two Airport Express 802.11n (1st generation A1264).
    All currently have MAC Address base authentication and no security in place for was of testing (security not relevant at this point in time).
    When I extend my Time Capsule with either Airport Express this works like a charm, the LEDs are all green and connection works for client devices.
    When I extend my Time Capsule with both Airport Express the same applies, everything works.
    However what I have found not to works it extending my Time Capsule with one Airport Express and then extending this Airport Express with the second Airport Express. While all LEDs are green and the second Airport is seen in the Airport Utility, I find no client are ever able to connect to it and alway either connect to the first Airport Express or to the Time Capsule. This is an issue I the area I want to cover is pretty big and I need the second Airport Express for the additional reach.
    I haven't found anything against this setup, it however appears you can't connect to the second Airport. The Airport Utility would even accurately depict the situation with Airport Express one dotted line to Time Capsule, and Airport Express two dotted line to Airport Express one.
    However no connection seam possible to Airport Express two.
    I have swapped Airport Express one and two, and in this case Airport Express gets the clients and Airport Express one now extending Airport Express two gets none.
    Is this an expected behavior, i.e. should I give up or is there anything I can do about this ?

    However what I have found not to works it extending my Time Capsule with one Airport Express and then extending this Airport Express with the second Airport Express.
    Apple's "extend a wireless network" feature will only allow you to extend the signal one level, not two. It's possible to have more than one device extending the signal, but each extender must connect directly to the main base station.....not to another device that is already extending the signal.
    The Airport Utility would even accurately depict the situation with Airport Express one dotted line to Time Capsule, and Airport Express two dotted line to Airport Express one.
    This is an illusion. AirPort Express is "joining" the wireless network.....not extending it. When the Express "joins" a network, it can be used for AirPlay, or a remote printer could be connected to the USB port, but the Express will not provide any additional wireless signal coverage when it joins a network.
    Is this an expected behavior
    Yes. I can try to look up Apple's support document that explains this if you want more information, but you may likely already have all the information that you need. Let us know.

  • How do i use my time capsule and extend the network with airport express

    I have a new iMac and Time Capsule, how do i extend the network with airport express. My time capsule does have a guest net work, and logins and passwords? I am no computer person. So for me it would have to be spelled out.

    Use the search as this has been done to death ..
    Bob Timmons is the expert on this.. look at his answers here.
    https://discussions.apple.com/thread/4274187?start=0&tstart=0
    https://discussions.apple.com/message/21856077#21856077
    This has been automated in the v6 utility. I am used to doing it manually in v5 utility which is also fairly easy.
    Apple doco is also good to read.
    http://support.apple.com/kb/HT4145
    http://support.apple.com/kb/HT4259
    Note.
    You cannot extend the guest network unless everything is up to date 7.6.3 firmware. And that is only with the TC as the main router in the network.
    All apple routers can be configured as the main wireless or as the extend wireless.. so don't worry if a post uses express or extreme or TC.. they are for wireless, the same thing.

  • Setting up a multi-zone stereo system in my home with Airport Express

    I'm trying to set up an in-home stereo system using iTunes as my main hub.  I want to play iTunes as well as Pandora and possibly Sirius.  Can I set this up with Airport Express?  Would I control everything through iTunes on my MacBook or an iPad?  How is this all wired if I have some existing external speakers with a receiver in my family room, built-in ceiling speakers in the kitchen, and outdoor external speakers?  I am comparing this to a Sonos system, but the Sonos is not really in my budget. 
    Also, what is the difference between Airport Express and Airport Extreme?  What would I need for this situation?  Thanks in advance for your help.

    >I want to play iTunes as well as Pandora and possibly Sirius. Can I set this up with AirPort Express?
    From iTunes you can stream a single audio source to one or multiple 802.11n AirPort Express Base Stations (AXn), but you cannot stream multiple audio sources to separate AXns. You would need a third-party product, like Rogue Amoeba's Airfoil to stream audio sources other than from iTunes.
    >Would I control everything through iTunes on my MacBook or an iPad?
    You could do either.
    >How is this all wired if I have some existing external speakers with a receiver in my family room, built-in ceiling speakers in the kitchen, and outdoor external speakers?
    Of the speakers you mentioned, only the ones connected to the receiver would work directly connected to an AXn. The audio output port on the AXn is a combo 3.5 mm stereo analog/optical digital port. Assuming your receiver accepts either analog or digital audio input, you can feed the output of iTunes or Airfoil from the AXn to the receiver. In turn, the receiver (if configured for whole home stereo) can feed the kitchen and outdoor speakers.
    >Also, what is the difference between AirPort Express and AirPort Extreme?
    What's similar: Both are Internet routers that provide wireless. Both provide the ability to share an attached USB printer. What's different: The Extreme has a built-in Ethernet switch. The Extreme supports sharing HDDs and printers together or separately via a USB hub. The Express has a built-in audio circuitry, the Extreme does not.
    >What would I need for this situation?
    Only the Express can accomplish providing an audio stream.

  • Trying to set up wireless network on PC with Airport Express

    I'm helping a friend set up his network with AirPort Express. He's got a modem attached to his PC, and currently has a router that sends a wireless signal to a receiver on the PC in the other room. Now he's added a Mac, and the old router/receiver doesn't work with Mac. So he bought an Airport Express.
    I've turned on the Airport, and first I connected the ethernet cable from the modem to the AirPort. Per the AirPort utility I put on the PC, it couldn't find it (got the flashing amber light). So then I took out that ethernet, and I hooked up the ethernet directly from the CPU to the AirPort. Suddenly, it was found, and it took me step by step through the set up. It asked for password info from our internet provider (??why would I have that info??), so we just hit "enter". Then it couldn't set up the network, and said to check the "manage network settings". I've tried everything. Not only can I NOT manage to create a network, but now NEITHER ethernet cable will cause any recognition in the AirPort. All I get is the blinking amber light. I'm about to throw all the computers out the window...it really should not be this difficult. I've set up networks in my own home, before, with both PC and Mac, and never had these problems. So, now, I've had to relink up the old router/receiver in order to send out this call for help. Can anyone suggest anything else to try before I use these computers for target practice?
    Thanks in advance,
    Jennifer
    P.S. The main PC w/modem is on Vista with service pack 2.0...since I can't even get that one working with AirPort, I hardly think it matters what the other computers are...

    I had some initial problems too. Make sure that you have the latest Airport Utility in the utilities folder. I used that to correct the problems I had when I first got Time Machine. I recommend resetting everything through there to get it working right.
    Mine is not set up to run an n network because my macs are all g and b compatible. Does the airport utility see the time machine? And if so, does it have a green light in the utility?

  • HP LaserJet 1000 not working with Airport Express

    Has anyone had any luck getting a HP LaserJet 1000 working with Airport Express on Windows XP or even OS X for that matter?
    I can connect to the Airport Express device using iTunes, but its pretty muched gimped for printing. uggh.
    MacBook Pro   Mac OS X (10.4.6)   D-Link DI-524

    I've no personal experience with your particular printer but these pages may help you
    http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?&lang=en&cc=uk&prodTyp eId=18972&prodSeriesId=45674&submit.y=7&submit.x=4&lang=en&cc=uk
    http://www.ifelix.co.uk/tech/1013.html
    Steve

  • How do I stream rhapsody from my MacBook Pro to my receiver with Airport Express?

    How do I stream rhapsody from my MacBook Pro to my receiver with Airport Express?

    You will need an application like Airfoil for Mac to be able to stream any audio files on your computer to the AirPort Express.
    http://www.rogueamoeba.com/airfoil/mac/

  • We have a Lexmark Pinnacle Pro901 and cannot get the printer to work with airport express - any suggestions?

    Can anyone give us suggestions on how to get our Lexmark Pinnacle Pro 901 to work with airport express? We cannot get airport express to recognize the printer.

    Refresh all your devices before reconfiguring printer to connect to your computer.
    a Shutdown computer
    b Pull out printer power cord from the socket. Let it stay for at least 30 seconds then plug it back.
    c Powercycle your router (unplug your router for at least 30 then plug it back. This will not change the settings of the router. This will just refresh the device)
    d Once router is ready , put back brick at the back of the printer to turn it on
    e Wait one minute
    f Turn on computer
    Repair your disk permission: http://bit.ly/OeD7U3
    Run Cleanup tool http://bit.ly/vnukXY
    Download updated driver from Lexmark website http://bit.ly/ToA1fo
    Run firmware update http://bit.ly/AcNqbg

  • How to output surround sound with airport express N

    is this possible? I am streaming successfully with airport express, sounds great with no audio dropouts. I have it hardwired to my router and the AX is connected optical to my surround receiver. Music is only played through my fronts. Is there a way to output surround sound? I can't even choose different audio options through my A/V receiver.

    I Found out the problem. When I was hooking everything up, I kept the t.v. on so I can assign audio inputs with the onscreen display. If the T.V. is left on....only stereo outputted. When I turned the t.v. off and with the airport express plugged into AUX, I was able to switch between surround sound settings.
    so the moral of the story is, turn off video devices when you just want sound, especially if they are hooked up to the AVR with HDMI.

  • Can I create a home network withous dsl connection with airport express

    can I create a home network without dsl connection with airport express?
    So it means I can't connect to my HP Airprint/Wireless printer without exretnal connection through ISP?? Just need to print from my Mac and iphone. I have Vodafone Prepaid connection, which is directly connected to my Mac. Does that make an internal network possible?

    You have to set up the Air Port with an internet connection to set up a network. Do you have a modem? If yes you can set up the network. 

  • Adobe acrobat only prints first page with airport express

    I got my printer (HP PSC1315) to work with airport express using one of the solutions described in these forums. Printing is fine except when trying to print pdf files with adobe acrobat, in which case only the first page of the document prints. Preview has no trouble printing pdfs. Anyone else experience this? Is there a solution?
    Thanks,
    Kevin
    PS- my version of acrobat is acrobat pro 7.0.5

    Figured it out.
    Adobe Acrobat/Reader is apparently very picky about printer drivers.
    I had to have the users delete their mapped network printers from their Printers & Faxes window.
    Then I opened the registry and went to:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3
    I deleted the drivers for the printer(s) the customer had mapped (e.g. Xerox 6360DN, .. etc.)
    I rebooted the computer
    I had the customer logon and remap their printer.
    That resolved the issue.

  • When adding WRE54G to wireless network incompatible with Airport Express

    I added a Linksys WRE54G to expand my network to a Powerbook G4 laptop with a weak signal. When I connect the wireless expander, I no longer see the Airport express in the airport utility. I cannot access the printer or itunes speakers attached to the airport express. When I power off the expander and have a weaker signal, the airport express is available again. I don't know how to configure the wireless expander to work with airport express, and if I try to create a WDS network with the airport express (currently unsuccessful), then I believe I will lose itunes support (and maybe the printer?).
    Does anyone know how to configure the WRE54G so that I can still see the airport express on my network?
    Thanks,
    Brigitte

    I was having the same problems. Try this link, someone seems to have solved it.
    http://discussions.apple.com/thread.jspa?threadID=1271648

  • Printers that work with Airport Express

    I am experiencing problems getting my lexmark p4350 printer to work wirelessly with Airport Express.
    Can anybody tell me of any printer,multifunction device,laser printer that will work with AEX?

    MACMV, Welcome to the discussion area!
    Be aware that ONLY the printing feature of a multifunction device will be usable when connected to the USB port on the AirPort Express (AX).
    Checkout "The iFelix unofficial Airport Extreme and Airport Express Printer Compatibility List".

Maybe you are looking for