Airplay does not always work with Apple TV (no airplay symbol)

We have two iPhones and one iPad (all using iOS6). Sometimes we can connect any device without problems, sometimes the Airplay symbol does not appear on the iPhone or iPad at all. Rebooting (unplugging and plugging again power cord) the Apple TV sometimes helps. Anyhow, I checked all hints from the Apple FAQ and the only thing I don't use is iOS 7 (but currently iOS 6 should still be ok).
Does anybody made the same experience?

This morning I downgraded the firmware of my Apple TV to 5.3 (I was on 6.0.2). This solved my problem! :)
I too had lagging playback, both from iTunes as well as for Airplaying a video from my iPad. Often the video or airplay just would not start.
With firmware 5.3 my ATV is again as fast as it used to be: videos start promptly, no waiting for the spinning disc and hoping the thing will start. It just works now :)

Similar Messages

Scrolling with the mouse wheel does not always work with 4.0? Never a problem with previsous versions.

in firefox 4.0, at times the scrolling wheel will not work. It has never been a problem with previous versions, and always works in internet explorer.

Hello Henry,
Thanks for the hint!
My mouse wheel is working, but not in flash player...strange... It is a Microsoft Comfort Mouse and I see there is already logged bug about that: https://bugs.adobe.com/jira/browse/FP-5145
Anyway besides this bug, there is an additional issue I think, that the vertical layout does not calculate properly the vertical scroll position, when certain elements are excluded from the layout. I have described this additionally in the Jira.
Regards,
Dinko

The Back arrow does not always work, particularly with Amazon and eBay sites.Even the on-page Back arrows do not work either.

I am using version 15.0.1. Since I updated to this version, the Back arrow does NOT always work particularly with Amazon and eBay. This is particularly evident when I go from a list the result of a search to an item on the lis. I cannot get back to the list even using the On-page Back arrow. I usually have to repeat the search to get back to the list again.

Hi MorrellMurphy
probably problem with [http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox Locked or damaged places.sqlite] file
thank you

LR4.2 and "Do not import selected duplicates" does not always work.

LR4.2 and "Do not import selected duplicates" does not always work. Running a Mac, 10.6.8, I am cleaning up hard drives, organizing old files. There are times lightroom 4.2 (and before) does not recognize already imported raws and does not gray them out. These are backed up cards and folders of of raw images. Why is the "do not import selected duplicates" check box not working???!!!

There's a known (and old) bug when duplicate identification fails on photos
that have been imported from another catalog.
Sent from phone.

Can I not add images to my itunes from Google images or other search engines as when I click get artwork it does not always work

Can I not add images to my itunes from Google images or other search engines as when I click get artwork it does not always work. I used to be able to do this.

The sort fields should generally be empty unless you've putting in custom values to sort solo artists by their surnames. You can apply common changes to thousands of tracks at once, just don't apply the wrong change because there is no undo.
It is a good idea to backup before undertaking large scale changes. See this backup tip for a suggested approach.
tt2
Message was edited by: turingtest2

On my iphone 4, when i try to open an app, the icons start wiggling like i want to delete them. the touch screen does not always work. sometimes the phone reboots itself. any help out there?

on my iphone 4, when i try to open an app, the icons start wiggling like i want to delete them. the touch screen does not always work. sometimes the phone reboots itself. any help out there?

Have you tried basics from the manual?
restart,
reset,
restore
iPhone User Guide (For iOS 4.2 and 4.3 Software)

Does Adobe PDF work with Apple Products?

Does Adobe PDF and other Adobe products work with Apple products?
Message was edited by: [email protected]

What Apple products?
What Adobe products?
What do you mean by Adobe PDF specifically?

How can I make Thunderbird 31.4.0 always open with Inbox? The add-on "select Inbox" does not always work!

Starting with TB 31.2 - some four months ago - I have not been able to open TB to the Inbox. I downloaded the "Select INbox" add on many times (and disabled/removed as many times) but it does not work consistently. When it does finally work I have no idea why. And then the next time, it doesn't work again!

I still have this problem. There doesn't seem to be any rhyme or reason to it. This morning TB opened to the Inbox but I have little confidence that it will do that again.
In earlier post I already replied that I don't have CCleaner on my computer. I also have not downloaded any programs since I began to have this problem.
Now I wonder if the Intego Net Barrier and Virus Barrier could be having a negative influence. I've been using these for years and have not changed their settings in any way for years. If they could be the reason that the settings are erased between TB starts what should I do?
You can probably tell that I only use my computer and do not understand anything about programming, etc.! I need complete, step-by-step explanations for a computer dummy.
Thanks in advance.

Query filter with amounts does not alway work

I have several customers with the same problem.
They create a query in Webi containing some simple objects. In the filter pane they have for eksample amounts less than -2000
This should give a report with rows where the amount is less than -2000. But in some cases there are rows with amount = 0.00. It does not matter what value they put in the filter, it could be -2000 or 1000 or 200 etc. the problem is that some rows with value 0.00 slips through and are listed in the rows of the report.
I have been searching for a note for this problem, but haven't found any yet.
The BOE version is 12.2.5.537
I do not have this problem on customers who runs a 12.1 version of BOE....
Thanks
Pål Risberg
SAP BO Solution Architect

Can you post the actual SQL?
Does this measure object have a sum(table.column)
(so it goes in the having and is evaluated on the group by level)
or not
(so it goes into the where and is evaluate on a row to row basis)...
In case of the latter you can off course have detail values that pass the test,
but are counter booked so they add up to zero, and show as zero in BO.
Good luck,
Marianne

Dual wan failover config: failback does not always work as expected for existing LAN traffic flows

I have an 881 router configured with 2 dhcp WAN connections. I am trying to configure failure detection of the primary connection (I do not really care about the secondary at this time).
I have an ip sla/track configured to monitor the primary WAN connection, and if it stops passing traffic it removes that route, passing all traffic out the second WAN connection. When the first connection is restored it should restore the route and everything should pass through the first connection again. This works for all my tests except one. If I start a ping stream from a client "ping 8.8.8.8 -t" and disconnect the primary connection it will lose a few packets but then use the secondary connection in about 15 seconds. After restoring the primary connection all new traffic will use the primary connection, but the ping stream will then stop working (fails over, but not back). If I stop the ping stream for a time (not sure how long is required, but my test was over a minute) it will then use the primary connection like all other new traffic. A stop of a few seconds is not enough, and even opening up a second command prompt to ping the same target also does not work (pinging new targets works as desired). It is as if something is caching the route/session/whatever and it has to have a window of no traffic before expiring/relearning the route. This means any sustained traffic to the original target will not work until it is stopped for a certain time to let "something" age out.
I need to know if there is a way to "flush the cache" (or whatever) during fail-back to force the primary route to be used after fail-back, or something else that will have the same effect. My suspicion is that the second route gets "preferred" because the first is removed by the sla, and when the sla returns the route to the list the existing traffic flow is not aware of the route list change, using the last known good route (which now does not pass traffic). The Issue here is that it takes a length of time for the now bad route to get flushed, which is greater than I want to have.
config (edited):
interface FastEthernet3
description Backup ISP
switchport access vlan 800
no ip address
interface FastEthernet4
description Primary ISP
ip dhcp client route track 100
ip address dhcp
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
crypto ipsec client ezvpn EZVPN-to-1941
interface Vlan800
description Backup ISP
ip address dhcp
ip nat outside
ip virtual-reassembly in
track 100 list boolean or
object 101
object 102
track 101 ip sla 10 reachability
track 102 ip sla 20 reachability
ip sla 10
icmp-echo 4.2.2.2 source-interface FastEthernet4
threshold 1000
timeout 1500
frequency 5
ip sla schedule 10 life forever start-time now
ip sla 20
icmp-echo 208.67.222.222 source-interface FastEthernet4
threshold 1000
timeout 1500
frequency 5
ip sla schedule 20 life forever start-time now
ip route 4.2.2.2 255.255.255.255 FastEthernet4 permanent
ip route 10.1.2.0 255.255.255.0 <1941 wan ip removed>
ip route <1941 wan ip removed> 255.255.255.255 FastEthernet4 permanent
ip route 208.67.222.222 255.255.255.255 FastEthernet4 permanent
ip route 0.0.0.0 0.0.0.0 Vlan800 dhcp 254
ip route 0.0.0.0 0.0.0.0 FastEthernet4 dhcp
Observation: the last 2 routes appear in the order shown above. Even though the vlan800 route has a higher administrative cost it is in front of the FA4 route, could this be contributing to the issue? Is there a way to ensure the FA4 route is always listed before vlan800 at all times?

I have an 881 router configured with 2 dhcp WAN connections. I am trying to configure failure detection of the primary connection (I do not really care about the secondary at this time).
I have an ip sla/track configured to monitor the primary WAN connection, and if it stops passing traffic it removes that route, passing all traffic out the second WAN connection. When the first connection is restored it should restore the route and everything should pass through the first connection again. This works for all my tests except one. If I start a ping stream from a client "ping 8.8.8.8 -t" and disconnect the primary connection it will lose a few packets but then use the secondary connection in about 15 seconds. After restoring the primary connection all new traffic will use the primary connection, but the ping stream will then stop working (fails over, but not back). If I stop the ping stream for a time (not sure how long is required, but my test was over a minute) it will then use the primary connection like all other new traffic. A stop of a few seconds is not enough, and even opening up a second command prompt to ping the same target also does not work (pinging new targets works as desired). It is as if something is caching the route/session/whatever and it has to have a window of no traffic before expiring/relearning the route. This means any sustained traffic to the original target will not work until it is stopped for a certain time to let "something" age out.
I need to know if there is a way to "flush the cache" (or whatever) during fail-back to force the primary route to be used after fail-back, or something else that will have the same effect. My suspicion is that the second route gets "preferred" because the first is removed by the sla, and when the sla returns the route to the list the existing traffic flow is not aware of the route list change, using the last known good route (which now does not pass traffic). The Issue here is that it takes a length of time for the now bad route to get flushed, which is greater than I want to have.
config (edited):
interface FastEthernet3
description Backup ISP
switchport access vlan 800
no ip address
interface FastEthernet4
description Primary ISP
ip dhcp client route track 100
ip address dhcp
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
crypto ipsec client ezvpn EZVPN-to-1941
interface Vlan800
description Backup ISP
ip address dhcp
ip nat outside
ip virtual-reassembly in
track 100 list boolean or
object 101
object 102
track 101 ip sla 10 reachability
track 102 ip sla 20 reachability
ip sla 10
icmp-echo 4.2.2.2 source-interface FastEthernet4
threshold 1000
timeout 1500
frequency 5
ip sla schedule 10 life forever start-time now
ip sla 20
icmp-echo 208.67.222.222 source-interface FastEthernet4
threshold 1000
timeout 1500
frequency 5
ip sla schedule 20 life forever start-time now
ip route 4.2.2.2 255.255.255.255 FastEthernet4 permanent
ip route 10.1.2.0 255.255.255.0 <1941 wan ip removed>
ip route <1941 wan ip removed> 255.255.255.255 FastEthernet4 permanent
ip route 208.67.222.222 255.255.255.255 FastEthernet4 permanent
ip route 0.0.0.0 0.0.0.0 Vlan800 dhcp 254
ip route 0.0.0.0 0.0.0.0 FastEthernet4 dhcp
Observation: the last 2 routes appear in the order shown above. Even though the vlan800 route has a higher administrative cost it is in front of the FA4 route, could this be contributing to the issue? Is there a way to ensure the FA4 route is always listed before vlan800 at all times?

BEWARE - 7toX DOES NOT yet WORK with PAL (50HZ)

Philip Hodgetts wrote:
It is neither "shambolic" nor "amateurish" but rather simply unfortunate that one CCIR format was not correctly identified.
Sorry Phillip - I think it's shambolic and amateurish that a week on down the line, you still have not stated on your website, and Apple have not stated on the App Store that this thing (by your own admission) DOES NOT WORK WITH PAL.
http://assistedediting.intelligentassistance.com/7toX/about.html#before_exportin g
Absolutely no mention of it in the 'Known Issues' section, so presumably you're not 'extremely sorry and somewhat embarrased' quite enough to actually warn people that they shouldn't buy it until the patch appears on the App Store.
If you were in the UK, you could be prosecuted under Consumer Law.
Andy

Patrick, I'm not complaining about the bug itself, I'm complaining about the catalogue of mis-information and/or non-information.
Yes, I defended Apple over the utter shambles that is FCP X - a sensational application released at least six months too early.
In my original thread, I said that I blamed Apple as much as Intelligent Assistance for this - does nobody at Apple actually test software before they display it on their website?
To be honest, I'm up to here with Apple - and if todays fresh install of Lion doesn't bear more fruit than the one I did two weeks ago, I'm seriiously thinking (for the first time in ten years) of buying a PC (although the thought fills me with dread).
I applaud Philip and his colleagues for doing what they're trying to do, but I wish they - and Apple - had done the whole thing more professionally.
That's all I'm going to say on the matter, now I'll keep quiet and hope to goodness they get 7toX working soon because if it takes too long, I could well be struggling with a PC instead of a Mac.
Andy

Belkin's Nostromo N52 does not recognize/work with games

I am using Belkin's Nostromo N52 gamepad with my iMac G5
Recently I installed "James Bond 007 Nightfire" and "Tron 2.0". Nostromo is not recognizing Nightfire at all. When I select the application Nightfire.app, Nostromo does not work as usually when others.
When I select "Tron", even though it looks like is accepted when I actually play the game Nostromo resets automatically by itself to the "global" settings without using the ones I chose for Tron.
I have not experience this issue with any other of the games that I have previously played (Jedi Academy, Halo, Doom 3, Medal of Honor). All these work correctly. Any ideas?

The fan and light issue are the result of using the incorrect PMU reset on your Intel mini. The correct procedure for an Intel mini is the SMC reset, as detailed here:
http://support.apple.com/kb/ht3964
Also keep in mind that the antenna for Wifi on your 2010 mini is on the bottom, so although it may sound odd, you could try flipping the mini over to test for improved signal. While upside down, I suggest a soft towel to avoid scratching the top of the mini. If that test improves or solves your reception issue, the surface the mini is placed on probably is the cause of your reception issues.

Does iPhone 4 work with Apple wireless keyboard?

Does the iPhone 4 work with the Apple wireless keyboard?

The original wireless keyboard is not compatible:
http://support.apple.com/kb/HT4112

Image.getScaledInstance() does not always work under Windows Vista

Hi:
I've run into some intermittent image scaling problems under Windows Vista (minus Aero effects) that I never experienced with the same program, same image(s), running same Java version under XP. The images I'm using are all JPEGs, and the problem appears to affect approx 1 out of 3 grayscale images (no color ones so far) w/o respect to size (ie: small ones can be problems while larger ones will work). Java -version shows 1.6.0_02-b06. I was wondering if anyone else out there has seen this, or can point out what I may be doing wrong. Sample code to duplicate follows.
Tx,
Jallewel
// ===================================================================
// Image Scaling Problem, Description & Demo Program (minus the image):
//   Environment: SDK/JRE: Java 1.6.0_02-b06, running under
//        Windows Vista Home Premium (32-Bit) on Dell Inspiron w/3GB RAM
//   ************* Symptoms ******************
//   Problem occurs when invoking image.getScaledInstance().
//   Problem shows up under Windows Vista, configured w/Windows Classic look
//       & feel - that is, with Aero effects turned OFF.
//   Problem does NOT show up under Windows XP on Dell Dimension 4500.
//   Test across computers used same SDK/JRE, Java program, and Image.
//   Problem ONLY appears in grayscale JPEG images, and only 1 out of 3 of those.
//   (I can provide a problem image)
// Results Compiling & Running This Program:
//   C:\Users\~\VistaProblem>javac VistaProblem.java
//   C:\Users\~\VistaProblem>java VistaProblem
//      Uncaught error fetching image:
//      java.lang.ClassCastException: [I cannot be cast to [B
//        at java.awt.image.ColorModel.getAlpha(Unknown Source)
//        at java.awt.image.ColorModel.getRGB(Unknown Source)
//        at sun.awt.image.ImageRepresentation.convertToRGB(Unknown Source)
//        at sun.awt.image.ImageRepresentation.setPixels(Unknown Source)
//        at java.awt.image.AreaAveragingScaleFilter.accumPixels(Unknown Source)
//        at java.awt.image.AreaAveragingScaleFilter.setPixels(Unknown Source)
//        at sun.awt.image.ImageDecoder.setPixels(Unknown Source)
//        at sun.awt.image.JPEGImageDecoder.sendPixels(Unknown Source)
//        at sun.awt.image.JPEGImageDecoder.readImage(Native Method)
//        at sun.awt.image.JPEGImageDecoder.produceImage(Unknown Source)
//        at sun.awt.image.InputStreamImageSource.doFetch(Unknown Source)
//        at sun.awt.image.ImageFetcher.fetchloop(Unknown Source)
//        at sun.awt.image.ImageFetcher.run(Unknown Source)
import java.*;
import java.awt.*;
import java.io.*;
import javax.imageio.*;
// class VistaProblem
public class VistaProblem extends Frame {
   private static ScrollPane sp = new ScrollPane(ScrollPane.SCROLLBARS_AS_NEEDED);
   public static ImageComponent ic;
   // Constructor
   public VistaProblem() {
      super("VistaProblem");
      add(sp, BorderLayout.CENTER);
      this.setSize(700, 520);
      setVisible(true);
     String fPathName = "./ProblemImage.jpg";
      ic = new ImageComponent(getToolkit().getImage(fPathName));
      sp.add(ic);
      sp.validate();
      ic.Scale(220, 200);
   // class ImageComponent
   class ImageComponent extends Component {
      private Image image;
      // Constructor
      ImageComponent(Image img) {
         this.image = img;
      // paint
      public void paint(Graphics g) {
         g.setColor(getBackground());
         g.drawImage(image, 10, 10, this);
         g.dispose();
      // Scale
      public void Scale (int width, int height) {
         // ***** PROBLEM LINE HERE; COMMENT OUT AND PROGRAM WORKS *****
         this.image = this.image.getScaledInstance(width, height, Image.SCALE_SMOOTH);
         repaint();
   // Main Entry Point
   public static void main(String args[]) {
      Frame f = new VistaProblem();
} // end VistaProblem

That does indeed appear to be a bug. I looks like it's having problems with the alpha value in the color model, so a possible workaround would be to change the color model the image uses before scaling. This may entail creating a new BufferedImage and drawing the old image into it.

How can I go back to Fire Fox version 6 or 5 my school's website does not currently work with Fire fox 7

I just found out through my school that the online campus does not support Fire Fox 7. So I would like to go back to Fire Fox 6 which is what I had before. My school does say that it supports version 5, but 6 seemed to work just fine. Either way how do I go back to those versions? If you want the nitty gritty details, every time I attempt to send emails while logged into my campus account it won't send them. I don't want some stupid app or some crazy version where I have to have all of these accounts and stuff. I just want Fire Fox 6 or 5 back that's all.

Hi Shero89,
Thanks for the answer. I am not new to IOS software but I don't really ever bother with it, have discovered how little I take advantage of the i-phones capability, in reality I still only really use it to phone, text, check emails, listen to music and look on internet. I'm not keen on jailbreaking it as I don't trust it to work so normally just update and leave it at that. Only reason I wanted to downgrade was because the update had stopped my bluetooth working but Kilted Tim solved that problem for me so am now not interested in downgrading software. I quite liked the things that IOS 5.1 gave me but wasn't happy with fact that bluetooth stopped working in car as it caused me problems. One day I might try and work out exactly what I-phones can do but on the basis that it's a phone all I really want it to do is phone, if that bit works I'm happy.

Airplay does not always work with Apple TV (no airplay symbol)

Similar Messages

Maybe you are looking for