AirPlay error 15006 when attempting to play from iTunes

I am using a 2011 MacBook Pro running OS X 10.7.4 an iTunes 10.6.1.
My wireless network consists of a Xfinity/Arris TG852G/CT modem/router and a AirPort Express (firmware v 7.6.1).  I have firewall turned off on the router and on my Mac.
Whenever I attempt to play via AirTunes from my iTunes on my MacBook Pro I get the following error message:
An unknown error (-15006) occurred while connecting to the AirPlay device “AirPort Express”.
The strange thing is that I am able play music via AirPlay from my iPad or iPhone with no issues. 
I've tried resetting the AirPort Express multiple times and rebooting everything (Mac, Router, AirPort Express).  Still this issue persists.  (I have also tried using different AirPort Express, same results).
Any suggestions?

Doesn't work for me, still get this and then everything you described:
Never get Orange home broadband is my advice!

Similar Messages

  • Error 15006 when attempting to play from iTunes

    I am using a 2011 MacBook Pro running OS X 10.7.4 an iTunes 10.6.1.
    My wireless network consists of a Xfinity/Arris TG852G/CT modem/router and a AirPort Express (firmware v 7.6.1).  I have firewall turned off on the router and on my Mac.
    Whenever I attempt to play via AirTunes from my iTunes on my MacBook Pro I get the following error message:
    An unknown error (-15006) occurred while connecting to the AirPlay device “AirPort Express”.
    The strange thing is that I am able play music via AirPlay from my iPad or iPhone with no issues.
    I've tried resetting the AirPort Express multiple times and rebooting everything (Mac, Router, AirPort Express).  Still this issue persists.  (I have also tried using different AirPort Express, same results).
    Any suggestions?

    i just fixed this for my setup
    I am running macOSX 10.8.2
    my airport utility is 6.1
    I have an Airport extreme connected through ethernet to my modem
    i then have my aiport express downstairs bridged to my extreme through wifi
    first go to your airport utilitie's "internet" tab
    Then click advanced
    I just set both of my airport devices to "configure IPV6 Automatically"
    with the IPV6 mode of "Native"
    Make sure they are both set up this way
    thats it, it works now
    Good luck

  • HT201412 My Ipad is not responding.  It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

    My Ipad is not responding.  It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Error 1054013 when attempting to refresh from planning

    I get the error 1054013: Syntax error loading filters - operation canceled when attempting to refresh from planning. I refreshed the security filters but it did not fix the problem. Has anyone else experienced this or does anyone have an idea on the root cause? Thx in advance.

    I remember seeing this. There is a filter that is not working. You should open the filters of the application in question and verify. Was there metadata changes (dimensions) that the filter references? This could be the culprit.

  • Error when attempting to play shared iTunes library

    I have two iTunes Shared libraries on my network, coming from seperate machines. I am using a Mac Mini as a media server.
    Both of my shared libraries show up on the list. When I attempt to view one of the libraries I get the following error message...
    "iTunes is not responding. Press the Play/Pause button to return to the desktop"
    Please note that one of the libraries (the much larger one) plays fine via the share.
    Any ideas?

    Do the shared libraries have passwords? If they do, then try leaving iTunes open when you go to Front Row with the library you want to use selected with password entered as if you were going to listen to it directly from iTunes.
    Ampaudi

  • Error message when attempting to upload from Flip camera

    When attempting to download flip videos, I get a message stating that usb device was disabled because it was taking too much power from the computer.
    This just started suddenly.  I'd downloaded video from the same camera to this MacBookPro just the day before.  What is causing this and what can I do about it?

    Hi there,
         Install the latest update of Adobe Application Manager from the below link:
    http://www.adobe.com/applicationmanagerpatch/
    Regards,
    Jairaj

  • How do you fix "Unknown error [4310]" when burning CD's from iTunes??

    When I try to burn an audio CD (CD-R) from itunes, it cancells the burning after the first song. It gives a message that says-
    Attempt to burn disc failed. Unknown error occured [4310]. Does anybody know how to fix this? I would really appreciate it. Thanks.
    premio   Windows XP Pro   pentium 4; 1.6 mhz

    That particular error, 4310, has no hits in the search I did.
    Can you burn with any other program?
    You might have better luck in the Importing & Burning in iTunes for Windows forums
    http://discussions.apple.com/forum.jspa?forumID=791
    There are some clever people over there that are familiar with more burning hardware than I am.

  • I upgraded from iPhone 3GS to iPhone 6.  Everything converted fine until I deleted an app in error.  When I downloaded it from iTunes, my account is no longer recognized by the app's host servers.  Can I go back and re-sync one app from my old phone?

    I upgraded from iPhone 3GS to iPhone 6.  Everything converted fine.  Yesterday I deleted an app in error.  When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion.  Can I go back and re-sync just one app from my old phone?  

    Try deleting what is called the iPod Photo Cache. 
    http://support.apple.com/kb/TS1314

  • Error 4000 when burning a disc from itunes

    When trying to burn a disc from itunes it looks as if all is ok and then it cancels itself and comes up with error 4000.
    Have downloaded the latest itunes and has made no difference.

    Hi efandg,
    Welcome to Apple Support Communities.
    From what I gather, you’re running into an issue burning a disc with iTunes on your PC. Take a look at the article below which provides general troubleshooting tips that can help you resolve the issue burning a disc.
    Can't burn a CD in iTunes for Windows - Apple Support
    Cheers,
    -Jason

  • TS1424 error -1202 when trying to purchase from itunes

    keep getting error code -1202 when trying to purchase from i tunes or if i try to redeem a card.

    Reinstall iTunes

  • Error message when burning audio CD from iTunes

    I tried to burn an audio CD and got the following error message: "The attempt to burn a disc failed. The device failed to calibrate the laser power level for this media." Can anyone help?

    I tried the patch because I thought if the drive was the same as the ones in dell that it would work, but unfortunately it didn't lol. I've tried 3 different brands of cd-r, no luck. I can burn a cd-rw which is a bonus I suppose.
    I called my support helpline again, and was given the story that the problem is the itunes software and they are not prepared to help. They even said that the patch that dell released doesn't fix the problem even though I gave him the address to the forum saying that it did. Someone must be responsible for the problem, meantime I'm stuck in the middle, and it seems it is the tsst corp L632H CDDVD drive that is giving problems.

  • Odd error message when attempting to start up iTunes

    Whenever I attempt to start up iTunes it tells me
    "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes."
    It was working fine 30 minutes ago and I have the latest version installed. Can someone help me?

    Try to completely remove iTunes/Quicktime then reinstall. Instructions on how to remove http://docs.info.apple.com/article.html?artnum=93698

  • Mapping Error: INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY when attempting to Upsert from a Flat File source to SFDC Account and Contact target

    I'm getting an INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY error when running a mapping that attempts to Upsert data from a Flat File to SFDC Account and Contacts.  I also tried to split The error message for Account: WRITER_2_*_1> WRT_8164 [2015-07-26 08:49:57.707] Error loading into target [Account] : Error received from salesforce.com.  Fields [].  Status code [INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY].  Message [Please enter a value for Country].WRITER_2_*_1> CMN_1053 [2015-07-26 08:49:57.707] : Rowdata: ( RowType=1(update) Src Rowid=1 Targ Rowid=1 Upsert is based on the External ID: Account_External_ID__c The error message for Contact: WRITER_1_*_1> WRT_8164 [2015-07-26 08:49:55.305] Error loading into target [Contact] : Error received from salesforce.com.  Fields [].  Status code [INSUFFICIENT_ACCESS_ON_CROSS_REFERENCE_ENTITY].  Message [Please enter a value for Country].WRITER_1_*_1> CMN_1053 [2015-07-26 08:49:55.305] : Rowdata: ( RowType=0(insert) Src Rowid=1 Targ Rowid=1 Upsert is based on the External ID: Contact_External_ID__c Any ideas on how to proceed?

    Hello,Can you please help me understand that limitations of the free data loader? In this link  - http://www.informaticacloud.com/editions-integration.html# - I see the below features listed.No-code, wizard driven cloud integrationMulti-tenant SaaS solutionDatabase and file ConnectivityFlexible schedulingBulk API support (for Salesforce.com)Unlimited rows/day24 jobs/day1 Secure AgentLimited to 1 userCommunity supportCloud Data MaskingQuestions:When I view licenses in my free data loader, under Feature Licences, it shows the License type for Salesforce Connectivity/Bulk API as “Trial”. Can’t I create a scheduled Data Synch task to upsert records in Salesforce using Bulk API mode?Is the email notification option (for success, warning and failure of data synch task) available on the free version (and not as a trial)?I understand there is a limit of 24 jobs/day. But is there a limit on the number of scheduled data synch tasks that can be created?Data Masking is listed as a feature above for the free edition. However, when I view the licenses in my free data loader, Data Masking is shown as “Trial”. Can you please clarify this?Is there a limit on the number of Connections that can be created?ThanksSanjay

  • Error message when attempting to play music in Itunes

    I posted this as a reply in another thread, but was asked to repost in a separate thread.
    =========================================================================
    I recently bought an external hard drive and I thought I had moved all of my music to the external HD.
    But I think the problem started when I was out of town and I took my computer but not my ex HD. I added some songs to my library and made the mistake of connecting my ipod to my computer.
    My problem is that when I open Itunes and click on a song, a little exclamation mark appears beside the song title and I get an error message that says, "The song "xxxx" could not be used because the original file could not be found. Would you like to locate it?"
    When I click yes, I'm taken to a window where I can choose the ex hard drive and "locate" the song. The problem is, I've already done this once for the over 2000 songs in my library. It took 2 days to finish. I don't understand why it keeps asking me to do it again. Nothing has changed since the last time.
    I've also tried the following solutions:
    1) downloaded idump and icopytrans programs to copy music from my ipod to my computer's itunes.
    2) uninstalled and reinstalled itunes
    3)used "add folder to library" command to add each song and artist to itunes.
    Nothing seems to work. Any suggestions?

    I have the same problem but only with songs within the playlist. Please advise.

  • Error message when attempting to sync to itunes

    Recently I have been having a problem syncing my iphone (original model 16 gb OS 2.2.1 with iTunes (8.0). I get a message that says unable to read from iphone. I can work around this by forcing the iphone to reboot. I can then perform a normal sync. However, the next time I attempt to sync I get the same error message.
    I would appreciate any suggestions to fix this problem.
    Thanks!

    The message says iTunes could not connect to the iphone " " because an error occurred while reading from the device.
    This message appears as soon as the phone is connected. It is coincidental with the sound the iphone makes when it is plugged into the USB cable
    I have updated to OS 10.5.7 and iTunes version 8.2 and this has not made the problem any less frequent.
    As far as what I'm trying to sync, I don't know what you mean. I'm attempting to do a general periodic sync of the iphone and my Mac.

Maybe you are looking for