AirPlay in future update for Yosemite

is Apple planning for an update for Yosemite soon that will include AirPlay feature

Found on another thread: Is iPhoto deleted by the 10.10.3 update ?
"right-click on iPhoto and show package contents, go in to Contents, and in to the MacOS folder and double click the iPhoto app from there... it launches just fine!"
Works for me too.

Similar Messages

HT201222 Is it just me or is the last safari update for Yosemite slowing everyone down? Any ideas how to fix it?

Is it just me or is the last safari update for Yosemite slowing everyone down? Any ideas how to fix it?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Future updates for old s60v5 devices

Will further updates for old s60v5 devices like nokia 5233, 5230 5228 be available? It has been long since I received the last update for my nokia 5233.

maazbgm wrote:
please new version for nokia c505.. Current version is v23.5.015
V23.5.015 is the latest available version for your S60v5 C5-05. And as has already been stated, is most likely the last firmware release your phone will see.
Ray.

I just downloaded the software update for Yosemite after it restarted and installed the software I have a white screen. What should I do ?o

I Just downloaded the latest software for Yosemite 10.10 after it restarted and installed the software it stopped, now I have a white screen. What should I do now?

Hi ..
Hold down the power button until the screen goes black.
Wait about ten seconds then restart your Mac while holding down the Command + R keys.
From there you should be able to access the built in utilities to verify and repair the startup disk if necessary and reinstall OS X. (10.10.1)

IPhoto update for Yosemite

I updated to Yosemite and iPhoto won't work till I update it. How do I update it? I don't see anything at Apple's website that gives me a clear way to do it.

Open the Mac App Store, click on Updates, and update it.
(118860)

Are there any known issues when using PSE 13 after installing Apple's recent 10.10.3 Combo update for Yosemite?

I've had Yosemite for some time and bought/installed PSE 13 afterwards.
In the last few days I upgraded to Yosemite 10.10.3.
As a PSE 13 novice I've been working my way through "Adobe Photoshop Elements 13 - Classroom in a Book". Working through the exercises I've found my iMac is sometimes taking longer to process the functions I'm using than prior ro the 10.10.3 upgrade. E.g., using the Healing Brush tools, Straighten Tool etc.
I've struggled with Apple's upgrade and had to re-install my machine from a previous Time Machine Backup and so I was wondering:-
Are there any known issues with PSE 13 post 10.10.3 upgrade?
Are there things I should be concerned about in the future before accepting an OS X upgrade?
Thanks,
Andy

No, no known issues. However it's a good idea to always delete preferences after OS X system updates.

IMovie won't open since i got the update for Yosemite

ever since i updated the mac book pro to Yosemite - it has been slower and also iMovie won't open at all

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
You can also try running the combo update.
10.9.2

Apple announces future update for Wi-Fi issues...

+From Apple's support site+
Symptoms
A very small number of iPad users have experienced issues with Wi-Fi connectivity. This article outlines workarounds for these issues. *Apple will also address remaining Wi-Fi connectivity issues with a future iPad software update.*
Note: For general information on troubleshooting Wi-Fi connections with iPad, refer to this article.
Products Affected
iPad
Resolution
If you consistently encounter issues connecting to a specific Wi-Fi network, try the following steps to resolve your issue:
Update Wi-Fi router firmware
Verify that your Wi-Fi router firmware is up-to-date.
Note: This is important if your Wi-Fi router supports 802.11n, as it may still be using the draft specification of the 802.11n standard.
For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi- Fi routers, check the manufacturer's website for details on updating your firmware.
Use WPA or WPA2 wireless security
Check the wireless security option of your Wi-Fi router. If WEP is being used, try using WPA or WPA2.
Some Wi-Fi routers using WEP wireless security may cause intermittent disconnects to iPad which requires re-typing a password. Using WPA or WPA2 wireless security on your network will correct this issue.
Note: WPA and WPA2 encryption protocols are newer, more effective security options for wireless networks than the older WEP protocol.
Adjust screen brightness
Check to see if your screen brightness is set to the lowest level by going to Settings > Brightness & Wallpaper. If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.
Note: Brightness control in the iBooks application can also be used to adjust brightness.
Renew IP address
In some larger wireless networks it may be necessary to renew your IP address. Renew your IP address using the following steps:
Tap Settings > Wi-Fi
Locate the Wi-Fi network you are currently using and tap
Tap Renew Lease
If the issue persists, try turning Wi-Fi to Off and then to On.
If after attempting the troubleshooting tips provided above you are still having difficulty connecting to a network please contact Apple.
Message was edited by: FrankPalmer
Message was edited by: FrankPalmer
Message was edited by: FrankPalmer

jbhmacpro wrote:
My experience on a recent trip without my MBP (a mistake I won't make again)? DoubleTree, McDonalds, Starbucks = Fail, fail, fail. Poor signal strength = fail.
Marriott, 2 different airports = success, success, success. Your "poor signal strength" is just a symptom of an incompatible network.
Define "old".
Any router that was not tested with an iPad before it was sold - all of them. Many of those routers were well made and comply with standards that were not written or finalized when they were sold. Those routers work well with devices such as the iPad that comply to those now-official standards.
Enlighten me, how is a router "misconfigured"?
It's been hacked up by every assistant store manager at McDonalds so it can run an array of peer-to-peer and gaming servers, as an example. There are literally an infinite number of ways for routers to be misconfigured.
You are saying that 20% of iPads are failing to connect and it's the router to blame.
I have no idea how many iPads fail to connect. If you added all of the replies to the "WiFi failure" threads here on Apple Discussions, it would be 0.2%. I think a more accurate number is somewhere in between. It isn't always the router to blame. Sometimes it is the user.
While I don't doubt router vagaries and the rube-ness of the general public being contributing factors, I'm certainly not a rube. Even know how to read and understand both my router instruction books.
But I gather you aren't a field IT support person for DoubleTree, McDonalds, or Starbucks.
I experienced the same kinds of problems when I first got my iBook and MacBook. Routers are cheap, break frequently, and get replaced on a regular basis. The next time you go back to those places, your iPad will probably work just fine.

Acrobat Updater for Yosemite from 9.0 - 9.5.5

Hello -
Attempting to run the updater to update to version 9.5.5, when the installer gets to "Installing Update" it pops-under a modal panel for "Install Extras" and waits on a response to that panel; unfortunately i can't bring that panel to the foreground because the updater panel is top most, so i can't click on Continue to unblock the install process.
Does anyone have a solution for this?
Thanks in advance.

I have exactly the same problem with my new computer. There are downloadable updaters on Adobe FTP site but I coudn't sucessfully use any of them...
The way I solved the problem is that I copied the entire Adobe Acrobat 9 Pro folder from my old mac (that one was already at 9.5.5) and then replaced the recently installed folder (I believe it was 9.3.x) on my new mac. Worked like a champ!
The other thing I noticed but didn't try is that after failed attempt to update to 9.5.5 In acrobat Pro Help menu you can hit Repair Acrobat Installation. This way it lets you uncheck the dreaded Adobe PDF viewer safari plugin and hit Continue. But I was too lazy to try and run the update again because it takes forever to download the updater.
Here's the FTP site. Maybe you will have better luck!
ftp://ftp.adobe.com/pub/adobe/acrobat/mac/9.x/

Aperture 3.6 update for Yosemite is out!

Check the software update!
Also iPhoto 9.6.

First observations with Aperture 3.6 on Yosemite:
There is a lot of initial background processing going on each launch: face detection, preview creation, syncing with iCloud.
I don't see any changes to the graphical user interface.
My Canon EOS 5D Mk II raw files and the Lumix FZ28 DNG files are looking very different now. The colors are more vibrant and the images are brighter; I'd even say overexposed.
The changed RAW processing is surprising, since the release notes do not mention it: Aperture 3.6 Release notes
Aperture 3.6 Update
Adds compatibility with OS X Yosemite.
Fixes an issue that could cause Aperture performance to slow down while browsing through images with onscreen proofing enabled.
Fixes an issue where Aperture could become unresponsive in rare cases when adding to a shared photo stream.
Fixes an issue that could cause Aperture to unexpectedly quit when using the Write IPTC Metadata to Originals feature.
Aperture no longer displays the alert, “This library has been opened with a newer version of Aperture.” when using Library First Aid with libraries previously opened in iPhoto.

Is there any future update for Nokia X Platform?

Whn nokia is going to update nokia x platform .People have watse their money on the phone tht is already obsolete..
Moderator's note: We amended the title of this post as we moved it to the most appropriate board.

The Nokia X will get updates but not the X2 platform,and you could say that the X2 has killed the first gen X series
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Nokia 808 pureview- Any future updates for complet...

I saw the Nokia sample image in
http://www.dpreview.com/news/2012/02/27/Nokia-808-PureView-with-41MP-sensor
how come the pictures can be in
ISO 114 - 5.3MP, 16:9?
I thought they only have 5mp and ISO 100 or 200. How can I select 101~199 ISO.
ISO 58 - 38.4MP
How can I also select 38.4mp? custom setting?

You can select the 38 Megapixels resolution by going to the Camera Settings, go to Creative mode and choose full resolution instead of Pureview.
In full resolution, you can have two different Megapixels due to the 16:9 ratio and 4:3 ratio.
In 16:9 ratio, you'll get 34 Megapixels. While in 4:3 ratio, you'll get 38 Megapixels.
If I have helped you in any way, give me a kudos!

Aperture update Retail DVD for Yosemite

Hello. I have an old Aperture 3 retail DVD, never bought the programme on the app store. Now I have updated my MBP to yosemite and I am stuck with version 3.4.5 and cannot open the programme anymore on my laptop. It tells me to update to 3.4.6, which I can't since I only have the retail but no app store purchase.
Has anyone an idea how to update to the final update for yosemite? I do not want to rebuy the whole programme since it will vanish within the next two months.
Please help!
Best from Germany.

I had to change the region and language to US/english and restarted the machine.
That is still going on?
I really thought that bug (Aperture update only being able to be downloaded with the region and language set to US/English) had been fixed after the Aperture 3.5.1 update last year. Thanks for letting us know, that this is still the solution to get the update done.
I do not want to rebuy the whole programme since it will vanish within the next two months.
Aperture may vanish from the App Store and Apple will not develope it further, but it will still be supported and remain working during the life cycle of Yosemite and probably longer. You can enjoy it, as long as you are running a compatible operating system.

Updates for Remote Desktop via App Store Software Update

Hello, and Happy Thanksgiving. On a computer running Mavericks, I installed Apple Remote Desktop 3.5 from the disk (not from the App Store.) On it's first startup, I was greeted with the message "The Remote Desktop Administrator software must be upgraded on this computer." I downloaded and installed the 3.7 update manually from http://support.apple.com/kb/dl1565. However, I view this as a "Band-Aid", and not a fix. How would I recieve future updates for Remote Desktop from Software Update within the Mac App Store?

Hi ya.. just to let everyone know Apple UK Senior Tech support are aware of this error message that we are all getting as from today and are on the case....

What happens if you perform certain component update for iphoto '11 on mac twice?

Hi i know it sounds ridiculous and silly question to begin with, maybe i'm just being a little paranoid the thing is that i have update a certain component update for iphoto '11 twice which is "digital raw compatibility update 4.0.3" via automatic app store update on mac and manually via apple support update; the question is that will it replace the update that has been installed earlier on via automatic app store update with the one i have just installed manually via apple support site?, will it take an extra disk space or just rewrite itself cause i don't want to have a dupe update on my mac? and finally will it affect future updates for that particular component? (such as not being detected on app store automatically if new version has arrive?)
Thanks guys in advance

Welcome to the Apple Support Communities
Probably the version downloaded from Apple Support has overwritten the App Store version, although it's strange that the computer has allowed you to install the same update twice. Apart from this, you won't have any problem in the future and probably it hasn't taken more space of the hard drive

AirPlay in future update for Yosemite

Similar Messages

Maybe you are looking for