Airplay in itunes not showing up

Hi,
I have a Denon 1912 AV receiver with airplay functionality, it is wired to my main router with the network features enabled, such that i can play files from my iphone 4. How ever i have not airplay icon on my itunes on windows 7. i have tired setting up a different windows account but still no success.
I have seen many post all with the same problem and there is no definite solution. so my question is; is there a fix coming up i have chosen this receiver not the onkyo specifically for the airplay functionality.

I found what my problem was. My firewall (but it could be a router) was blocking port 5353 UDP bidirectional communication. just open that port.
Apple and Denon's documentation is horrible it took me ages to find what the problem was.
I was never a apple fan, but this made me hate them even more.
if all your apple devices are not showing the icon i means it is not a problem of port blocking my a firewall as was my case. i could probablly is the router.
ps did you turn on network stanby on the denon?

Similar Messages

  • The Airplay Icon is not showing up on My Taskbar After Upgrading to Mountain Lion

    Please help.  I have 2nd generation Apple TV and a 2011 Imac but the Airplay Icon will not show up on Taskbar after upgrading to Mountain Lion.

    Finally after trying to uninstall/reinstall (no luck!)
    I'm on Windows 7 64 bit.  iTunes 10.7   And I have a solution:
    If found a thread about IPv6.
    I followed the same directions on Windows 7 64 bit and it worked.
    Disable IPv6 on _all_ of your IP ethernet adapters. 
    That includes Virtual Machines (VMWare... yes those too), including IPv6 for wireless.
    Close iTunes.  Start iTunes.  Works.  Airplay Icon is back.
    It looks like All of the AirPlay devices may have to be re-setup.  At the very least rebooted.
    I found that I had to clompletely erase my DHCP addresses from my (non Apple) router.. and that fixed it.  Finally.
    Even though this is for the Mac... I believe they are onto something.   Original thread link:
    http://mactips.dwhoard.com/mactips/other-applications/fix-airplay

  • I have a imac mid 2011 model, why can't i connect to airplay?  And the airplay icon does not show in the menu.

    I have a imac mid 2011 model, why can't i connect to airplay?  And the airplay icon does not show in the menu.

    Hi there cjperido,
    You may find the troubleshooting steps in the article below helpful.
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts5209
    -Griff W. 

  • The Airplay icon does not show, regardless that it is clicked on display. How can I do to see the Airplay Icon in order to connect my apple TV with my Mac Pro?

    The Airplay icon does not show on my Mac Pro, regardless that it is clicked on display. How can I do to see the Airplay Icon in order to connect my apple TV with my Mac Pro?

    To check your model go to About This Mac (by clicking on the Apple icon, top left) and then select more info. If you wish to use mirroring you will need one from 2011 or later running OSX 10.8 or later. The alternative would be to use 3rd party software like Airparrot.
    About AirPlay Mirroring in OS X

  • Hi, I have a mac book pro running mavericks and recently tried to connect to a 3rd ten apple tv but the airplay icon is not showing up in the top bar. I then tried my girlfriends laptop running mountain lion and it showed up straight away. Any suggestions

    Hi, I have a mac book pro running mavericks and recently tried to connect to a 3rd gen apple tv but the airplay icon is not showing up in the top bar. I then tried my girlfriends laptop running mountain lion and it showed up straight away. Any suggestions?

    How old is the MacBook Pro?  AirPlay is only supported on 2011 and newer models, due to the requirements it has in hardware for graphics acceleration.

  • Add PDF to iTunes not showing up in print PDF pop up menu

    Add PDF to iTunes not showing up in print PDF pop up menu. I lost the print PDF to iTunes option. its no longer there. I still have web reciets and mail. also when i add in "edit menu" they don't get added.all this used to work fine

    i found the answear. go to library/PDF Services  or  ~/Library/PDF/Services and clean out this folder. you can also add scripts and automator scripts to add things

  • Why does the iTunes not show "Photos"

    Why does the new iTunes not show "Photos" after it is synced, and why does iCloud not show Photos also?

    Ralph9430 offers a good suggestion.  But you may need to do this before taking his advice:
    Check in iPhoto's Preferences (which you can open from the iPhoto menu).  Look in General, and make sure "Connecting Camera Opens" is set to "Image Capture").
    If it is set to "iPhoto", you won't be able to get to Image Capture easily.

  • HT201270 ITunes not Showing iPad and iPhone after IOS7 upgrade.

    ITunes not Showing iPad and iPhone after IOS7 upgrade. I have reinstalled iTuned. Repaired services...etc

    Hey Sliqueg,
    There are a few troubleshooting articles that can help resolve the issue. Check them out here:
    For Windows:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    For Mac OS X:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Sincerely,
    Delgadoh

  • HT204291 Airplay icon does not show up in itunes after upgrade to 11.1.3.8

    I upgraded my itunes to 11.1.3.8 and my airplay icon no longer shows up in itunes on my windows PC. it works from all of my other airplay devices ipad, iphone, and ipod.  I can't output to my apple tv from my PC. I have restarted my apple TV, my PC and itunes several times. 

    I'd try updating to version 11.1.5.5:
    http://www.apple.com/itunes/download/
    If you're already at version 11.1.5.5 (or the update didn't help with the recognition trouble), try the procedure in Cerbu's post:
    Re: sync problem
    ... or try section 5 from the following document:
    TS1538: iOS: Device not recognized in iTunes for Windows.

  • Airplay selection icon not showing in itunes.

    I have everything working for airplay when the icon in itunes appears. I have Apple Tv and use the remote on my ipad, Ipod and Iphone. Once I get the icon into Itunes it works fine but if Windows does an update overnight or I shut down Itunes, the icon dissapears. I always leave Itunes running in the background but if I shut down the computer or turn off itunes the icon goes away. After an hour or so of messing around with it, it seems to appear but wonder what the deal could be? I try logging in and out, turning off homesharing and turning back on, and exiting itunes and opening back up. Sometimes that will bring the icon back. Has anyone had this problem? I have not read of any that come and go like this.
    When the icon is not showing in Itunes, all the remote shows is the apple TV.. I actually have airport express and a receiver for home theatre that I can use as well. My problem is getting the icon into itunes. Any help would be appreciated.

    I am having the same problem.  I have a Marantz SR7005.  Until a month ago I was able to stream music to it over AirPlay from both iTunes and AirPlay Remote on my iPhone.  Now the AirPlay selection icon has disappeared from the bottom of both iTunes and Remote on my iPhone.  I've power cycled all components -- Verizon FIOS router, PC running Windows XP, Marantz receiver, iPhone.
    The Marantz receiver is able to connect to my network as I'm able to play internet radio and check for firmware updates (all of which are up to date).
    I've called both Marantz and Apple with no success.  What happened?  This used to work and and I'm not aware of changing anything.

  • AirPlay icon is not showing up on either of my ipads.

    I just got Apple TV today. Was excited to use airplay and the icon does not show up on either of my iPads. I have looked through all of the troubleshooting. Everything is wirelessly connected to my same home Internet. All devices are updated, I rebooted both iPads and the router. It will work on iTunes on my desktop but not the iPads. I even turned off the fiirewall. I am super frustrated at this point for spending all of this money and it doesn't work!! Please help me if you can!!

    Have you activated restrictions for the app in Settings/General/Restrictions?

  • Airplay Icon does not show in computer

    The aiplay icon does not show in the computer but it does show on itunes. My computer is a Macbook Pro, Retina Mid 2012, with a processor
    2.3 GHz Intel Core i7 and Memory 8 GB 1600 MHz DDR3. My software is up to date and it is Mac OS X Lion 10.7.5 (11G63). The software of my apple tv is already up to date. I already checked in system preferences and display and it doesn't show the icon to enable the airplay. My computer and TV are using the same wireless.

    Welcome to the Apple Community.
    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button.

  • ITunes not showing songs that are on the iPod Touch

    I have an iPod Touch 4th Generation.
    I use iTunes 11.0.
    I usually connect my iPod Touch to iTunes and play songs from there because I do not put songs in my itunes library.
    I was doing this as usual and today when I connected my iPod Touch to iTunes, songs did not show up on the music tab of "On This iPod".
    Just the previous day, I opened iTunes and there were all my songs.
    Today, iTunes does not show any of my downloaded songs that were not bought from the iTunes Store.
    The iTunes Capacity Bar shows that I have songs on my iPod Touch.
    But when clicking on the iPod and going under the music tab in "On This iPod", there is no music other than a few songs, which were purchased from the iTunes Store itself.
    I also tried third party software just today to check if I can get the songs off my iPod.
    I tried using SharePod and it did not detect any songs, not even the purchased songs from iTunes.
    There are songs on the iPod Touch only. I can play all the songs from the iPod Touch just fine.
    They are simply just not showing up on iTunes.
    How do I get iTunes to show the songs on my iPod Touch? The capacity bar says there are songs.
    I tried SharePod a few times long before this happened, and it showed the songs on the iPod Touch.
    I don't understand why all of a sudden the songs all disappeared from iTunes itself only.
    (I would say this is similar to other issues where iTunes DOES show songs while the iPod itself DOES NOT. Mine is the opposite.)
    Thank you for the help in advance.
    Message was edited by: j_leongg
    I tried backing up the iPod Touch.
    Now all the songs on the iPod Touch (except for the purchased ones) are turned to blank names and are skipped.
    There is no name for each song or artwork, they all are called 'unknown'.
    Only the purchased songs are left unharmed. Everything else is corrupted now.

    SOLUTION: Some Music Won't Play After Upgrading Your iPhone To iOS7
    Red square in red circle cannot play songs
    My iPod isn't playing certain songs. Help?

  • Movies in Itunes not showing up on Apple TV

    I am finding that some movies which I have added to Itunes and play fine on my Mac, do not appear on my Apple TV.  They are mpeg4 with the H.264 codec, which is what all my videos are.  I have tried rebooting the ATV and also restarting Itunes on my Mac, but still the same thing.  I have a category which contains 7 items, but only 5 of them appear on the ATV.  It's driving me a bit crazy!  Hope someone has an idea about what to do.
    Thanks!

    RogerOut makes some good points and this feels to me like a ham fisted attempt by Apple to take control of my media in a way that I don't want.  The stuff it is choosing to call "home movie" is 100% legit movies, but not ones I bought through the itunes store.  So I load a movie and then it mysteriously does not show up in my Apple TV because it has defaulted to "home movie".
    What I still fail to understand is what the heck is the purpose of this apart from annoying users who's stuff now does not appear on ATV without explanation or warning.  So glad to have this forum to help me, but why should I have to do this to figure out how to overcome a stupid thing that Itunes is doing to my movie (it is a movie!)?
    As I say though, what possible benefit is it for a users media to be labelled in this way and anyway, why does calling it a home movie make it unreadable in ATV?

  • IPod Classic no music, freezing iTunes, not showing up, HELP????

    I have a used iPod Classic 120GB. I bought it off my friend. I took it home and added my files (about 5,000 songs and 13 videos) to his stuff (about 6,000 songs) and ended up with it being about half full. I let it sync, then ejected and disconnected. But it said there was nothing on it. I went back and reconnected it to my iTunes. The iTunes froze, and I couldnt access the iPod in anyway. I disconnected it, and when I did it unfroze everything, and popped up in iTunes, saying that the iPod was missing.
    I checked the iPod's "About" section and it said that it had 56GB of "Other". I took it back to my friend and he said he deleted the folder with everything in it. It is empty now except for 1.2 GB of who knows what, but still freezing my system and not showing up.
    I have tried restarting it, and putting it into disk mode. Nothing worked.
    HELP
    Version: 2.0.1 PC
    Message was edited by: black-belt-boy

    jartis wrote:
    HI, i am having the same issue with my ipod. Can you please tell me what you mean by putting on "disk mode" and deleting the files? Thanks
    First let's make sure the drive is physically OK...
    *Check your iPod with Diagnostics Mode*
    It's possible that your iPod's hard drive has started to fail. Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for *Manual Test*, then select *IO > HardDrive > HDSMARTData* to reveal your stats. For comparison here are mine for my 2 year old 6th Generation Classic:
    Retracts: 889
    Reallocs: 12
    Pending Sectors: 0
    PowerOn Hours: 2202
    Start/Stops: 894
    Temp: Current 24c
    Temp: Min 10c
    Temp: Max 50c
    Take a note of your results. When finished press *SELECT & MENU* for 6 seconds to reset the iPod again.
    With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
    Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
    *Reallocated Sectors Count*
    Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
    *Pending sector count*
    Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
    Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
    <hr>
    Assuming you've ruled out a physical problem with the iPod's drive we can now move on to check for logical problems...
    *Check iPod hard-drive for errors*
    Hold Select+Menu on the iPod for about 6 seconds until it resets, then hold Select+Play as soon as the Apple logo appears, again for about 6 seconds to put the machine in disk mode. Open iTunes and in the Sync tab of the preferences menu check *Disable automatic syncing of all iPhones & iPods*. Now connect your iPod to the computer, wait until it connects, then close iTunes. Browse *My Computer* and right-click on the drive for the iPod, click Properties, then click Tools. Under Error-checking, click *Check Now*. Under Check disk options, select *Scan for and attempt recovery of bad sectors* (Optional - takes ages but a good idea if you've reason to suspect physical damage). Click Start. Mac users should run *Disk Utility / Repair Disk* for the equivalent process. This should find and correct any errors in the logical & physical structures of your iPod's hard drive. Once these have been fixed you can reset the iPod (hold Menu+Select ) and should stand a better chance of a successful restore. It might also pay to check the status of the source drive containing your media, particularly if no errors were found on the iPod.
    And if that still doesn't help try Erase your iPod - The Super Fix for most iPod Problems. Basically a low level format of the iPod’s hard drive to get around whatever problems are stopping iTunes from restoring it.
    Once you've restored your iPod don't rush to dump all the data back exactly as it was before. I have found that lots of large or complex smart playlists can sometimes trigger constant reboots or dumping of the iPod's library. In addition, larger transfers can fail leaving data in an inconsistent state. Try this technique for populating the iPod in stages.
    *Break up large transfers*
    In iTunes select the menu item *File... New Smart Playlist*. Change the first drop-down box to Playlist, the next to is and the next to Music. Tick against *Limit to*, type in say 10, then change the drop-down to GB, and set the last drop-down to artist. When you click OK you can enter a name for the playlist, e.g. Transfer. Now sync this playlist to your iPod rather than your entire library. When the sync is complete modify the rule ( *File... Edit playlist* ) to increase the size by your chosen amount, then sync and repeat. You can experiment with different size increments, if it doesn't work just choose something a bit smaller until it works each time. Before long you should have all your music on your iPod. Once that's done you can move on to other media such as podcasts, videos, photos, playlists etc.
    tt2

Maybe you are looking for

  • I'm trying to set up my eprint and it's telling me i need to upgrade my product? help!!

    How do I set up my eprint on a new HP Deskjet 3050A, I'm pressing the eprint button and being told I need to upgrade product?  HELP!

  • SendMail function doesn't work

    I have a real problem. We have a Win7-64bit build with Office 2010 and Adobe Reader XI (11.0.0.379). The functionality to send a pdf directly from Reader via outlook just doesnt work. The error you get is "The file xxxxxx.ost cannot be opened". Initi

  • Sender file is not read all the records

    Hi Experts, we got file to file scenario in production, sender file adapter did not read whole file, it did pick up some of the records only insted of whole file. Can anyone please suggest me why sender file adapter pick some of the records only. Kin

  • Canon 5D III tethered to Ipad

    I have a 5D III. I would like to tether (wireless or cable-direct) to my iPad 4 Retina so I can proof pictures in near real-time.  I prefer wireless so I can work in the field where this is NO internet connectivity.  I have Aperture, Lightroom 5, and

  • Issu with multiselection using Checkbox in adf 11.1.1.7

    Hi Experts, in my  application i m using table with pagination property and i also add multiselection using boolean check box , i created boolean transient variable in VO  , and multiselection work fine but in one scenario its fail , Scenario is :- s