Airplay is constantly not working and connected to internet but not showing content

This happens ALL the time. So my apple tv airplay constantly goes out and doesnt work anymore. I try my ipad, ipad mini, and iphone 6 and NONE work. I then I have to reset my apple tv, but then it doesnt show any content. It is connected to the internet and the signal strength is max. I dont know what to do anymore. If I would have known that this device would be a piece of **** then I wouldnt have bought it. Everything is has the current update. Does anybody have any ideas. I tried every step in the troubleshooting from restarting it to resetting my router. Otherwise im smashing it with a hammer and getting fire tv

This is due to a local network issue. The signal strength on the device doesn't account for any issues, you need to go to istumbler or similar to get a network report (to see full representation of signal, noise, and nearby networks. Trying ethernet will also help rule out wifi issues. You are also free to test on another network (preferably a controlled one like Apple's)

Similar Messages

Audio speakers not working, says connected to HDMI but not

So last night i spilt a small ammount of water on my laptop on the left hand side, i dried it off and today i come to find out that the mute button doesnt change color but works. My Cap's Lock light doesnt show, and says im connected to an HDMI for sound. when i connect headphones it still doesnt play through. when i open the sound menu from control panel it says that the (built-in) speakers are not connected. Is there a fix for this?

This is due to a local network issue. The signal strength on the device doesn't account for any issues, you need to go to istumbler or similar to get a network report (to see full representation of signal, noise, and nearby networks. Trying ethernet will also help rule out wifi issues. You are also free to test on another network (preferably a controlled one like Apple's)

Safari is not working on the Mac. Internet is fine, mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar.

Safari is not working on the Mac. Internet is fine. mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar only and coloured wheel appears.

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
If extensions aren't causing the problem, see below.
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Why my wi-fi is not working, and it says bluetooth is not working too??

Why my wi-fi is not working, and it says bluetooth is not working too??
My bluetooth n wi-fi are both unavailable! i had already restore my device, but it still doesn't work!!
My name is juniper, i am from Taiwan! Any know what's wrong with this piece of XXXX!!?? Help me plzzzz!!

Hi ,
I am a specialist in Computer and Information Systems e. I am 40 years old from Egypt
I have Iphone 3g 8g and my SN 868391XZY7H
Tunes update killing my Iphone software , 3 days my Iphone not working Although I am go to download 100% update and my iphone installed all a software update but I don’t know what happened why my Iphone not working ?
now some one help me and he installed software for my iphone and it is working but Wi-Fi and Bluetooth not working
I need help me because Tunes update from killing my Iphone ??.
i want my old Iphone software please
thank you somuch
[email protected]

Hi i use the hp lap in connecting for internet but not open the bro

hi
i have some problam in my laptop in connecting for internet but not open for broswer and not update for software tell the solution

Hi @jerry3 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Notebook and not getting to the Internet. First try just to reset the router. Unplug from the power wait a few moments and plug back in.
Can get to safe mode with command prompt? F11 upon startup choose safe mode with Networking.
Can you get to the Internet in safe mode?
Please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices.
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

My finger print reader is not working and this unknown driver is not installing HP4230s

my finger print reader is not working and i have tried the downloads available on hp website and many other but its not showing in the area where we configure the passwords for the pc
and my other problem is as i have updated my pc to win 8 or 8.1 this device is not getting installed the hardware id is : ACPI\VEN_HPQ&DEV_0004
kindly solve these problems as i really want to use this finger print and i dont know what is this unknown device all about

my hp envy mp notebook fingerprint is not working, give the software for it !

Airport express connects to internet, but not print server

hello all. i hope someone can help me with this. 2 days ago, my wife was able to print using her ibook/airport expess setup. today, the network diagnostics has this message: "network diagnostics was able to connect to the internet but not to the server EPSON Stylus CX3800.pdldatastream.tcp.local. this could be caused by problems with the server, or an internet problem between this computer and the server." she says this happened when she turned it on. what could be causing this? any and all help welcome. mcrat

You can reset the AirPort Express (AX) following the directions in Resetting an AirPort Base Station or Time Capsule FAQ.
Then you can use AirPort Utility on your computer to configure the AX.

AE ppoe mode in AE only allows macbook pro and iMac to connect to internet but not ipad

I just upgraded to 20MB DSL line and got a new Qwest Q1000 modem connected to an A Extreme.
Since Qwest now has PPPoE, I set the Q1000 modem to bridge mode and turned off Wifi.
Then I Set the AEx router to ppoe mode, entered my username and password from Qwest and all is well with all lights green.
But... only my imac and macbook pro connect to the internet. My ipad, my wife's macbook and an ipod touch cannot connect.
According the Airport Utility, all these devices are detected by the wifi network and they have their own unique IPs provided by the AEx router (in pppoe mode) 10.0.1.7, 10.0.1.9 and so forth, no ip conflicts detected, all the lights green with full access to the internet. Again, only my iMac and my macbook pro actually connect to the internet at full speed.
Does any one know why some devices connect to the internet while others are not able to...
Again, no errors detected anywhere, all modem and router lights green.
Any help is welcomed.
Janickk

Thanks for the reply. Your suggestion did not work. Apparently there is an issue with DNS addresses.
The Airport Extreme in pppoe mode sets the router and DNS addresses to be the same 10.0.1.1. Some devices (like my macbook pro and iMac) ignore this DNS value or use a different (unknown) and then they connect to the internet perfectly. But the devices (ipads and ipods) aquire and set both values (Router and DNS) to be the same, (10.0.1.1 and 10,0.1.1) wont connect to the internet until I manually changed the DNS address in the DNS field.
Question: are these two values supposed to be the same/different/ in both fields in the AExt in pppoe mode?
Thanks
Janickk

Airport connected to internet, but not working in Safari or Firefox?

I had an airport network in my last apt. We just moved, and I can't set it up in our new apt! Our internet connect def works, and I get a green light on the airport. It says: <Airport is connected to the network "xxx". You are connected to the Internet via Airport/>
But then both Safari and Firefox say "server not found"!
what am I doing wrong?
Mac OS X (10.3.9)

I have other info on the modem I'm trying to connect to.
It is of a sensitive nature so I don't want to post it here.
HELP PLEASE!
2WIRE Modem is having a problem connecting the browser. the modem says I'm connected but my browser can't surf.
I do have the network name as well as the encryption key.

MacBookPro and iPad connect to internet, but not iPod Touch

I have a MacBook Pro running 10.8.2
and a 3G iPad running 6.0.1
Both of these are connecting to WiFi and working correctly.
Also have 4G iPod Touch running 6.0.1
It used to connect with no problems, but no longer does.
I tried this, with no solution:
- Reset the iOS device. Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
Suggestions, please?
I want my iPod Touch back in use!

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe this problem. You are not giving much information.
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

On iphoto my stop import is not working and the force quit does not work either

please help - the stop import and force quit on iphoto both not working. thx!

This happened to me today on the iPad; I put in the password 4 or 5 times. I began to think my account had been hacked. I tried again on my iPhone and it worked first time. Then I tried again on the iPad and same thing—worked first time. Maybe just a temporary glitch in the server?
Michael

UCCX: Silent monitoring is not working and recorded file is also not playing

Hi,
Running UCM 8.5 cluster with UCCX 8.5.
In CSD, silent monitoring is not working.
Windows XP OS is running on supervisor desktop. when i select the agent
then the silent monitoring icon will highlighted once i click on the icon,
after 5-7 seconds i am getting an error "Silent monitoring session has
failed".
Not able to playback the recorded files:
I can able to record and the file size is 2.6mb for approximate 3min
recording.When i tried to play from supervisor record viewer it is playing
but no voice is coming. And i downloaded using play & save option and
tried to play the .wav file but i can't hear any voice.
Problem is while playing back the recorded file. I can able to see the
recorded files in the UCCX.
Please help me out!!!
Thanks & Regards,
Krishna

It's likely the same problem: CAD is not forwarding packets to CSD or the CCX recording service. Two common causes for this are:
The phone is not spanning to the PC port or does not allow PC Port VLAN Access. Change these options to true on the phone's configuration in CUCM.
The NIC of the agent's PC running CAD is not processing 802.1q-tagged Ethernet frames. It must not drop these and pass them into the Windows NDIS stack for CAD to get them. Google is your friend here; this commonly requires registry changes to make the NIC process the packets.

Google Maps GL not working and 3D developer view is not being shown

im using FF16 and i have a 1GB Nvidia 525M Graphic card in my laptop. Im not able to enable google GL maps in FF but the same is working in Chrome. Im also not able to use the feature to view webpages in 3d view, which when i tried on other pc's is working.

Have you tried a PRAM and an SMC reset? They're longshots, but don't take long to try.
PRAM: http://support.apple.com/kb/HT1379
SMC: http://support.apple.com/kb/HT3964
Have you run Apple Diagnostics from the disc(s) that shipped with the computer?
Since the problem occurs in all browsers, it still sounds like a video hardware or video RAM or maybe a software issue having to do with layers and rendering.
The map layers aren't getting rendered, or if rendered, aren't getting displayed.
Do you have any browser add-ins? Pop-up blockers?
Since you have two video chipsets, it's possible that might be related to the issue.
This non-Apple website talks about switching between chipsets on the various MacBook models so equipped, and points to a free 'donationware' program for the menubar that lets you easily switch between chipsets:
http://www.everymac.com/systems/apple/macbook_pro/macbook-pro-unibody-faq/macboo k-pro-unibody-switching-between-graphics-processors.html
Trying to think of other software that might help pinpoint the problem, does the iPhoto Slideshow 'Shatter' template work? Working properly, it 'shatters' images into several color layers and rotates them in and out to build and deconstruct photos.

Connected to internet but not working

saying its connected but says cant activate (3000) help please

There is a heavy demand on the update servers right now doe to a high demand for the new OS patch. You could try later.
It could also be your wifi.
You can try a friend's wifi or a free hotspot to see if you get better response at setup at least. A friend of mine uses the cafe hotspot under his office floor!
If you have a UK Virgin router you may have to change the wireless encryption method to WPA or WPA2 with a new passphrase, and I believe it's not easy to get into the setup menu on those. Been reported before. Go to 192.168.0.1 on your main computer's web browser and see if you can get in. or try 192.168.1.1.
If that fails open a command prompt in Windows (Start > Run type CMD). In the command prompt window type IPCONFIG and hit enter. The Default Gateway is your router IP.
The admin password if it has one may be on the router's label.

MacBook Air loses connection to internet but not LAN

Hi, I am using a MacBook Air 11" (mid-2012) running OS X Mavericks (10.9.3). I'm connecting to my home LAN via WiFi connection to a TP-Link 300M Wireless router that is setup as a switch (per instructions here http://www.tp-link.com/en/article/?faqid=417), which in turn is connected via wire (ethernet-over-power) to a Technicolor cable modem/router provided by my ISP (UPC in the Netherlands; I can look up the model number of the router if needed, but it's two floors down right now and doesn't strike me that this is the cause of the problem).
I have a problem that my MacBook Air intermittently loses connectivity to the internet for extended periods (minutes) even though (a) the MacBook Air maintains full connectivity to my LAN at the same time through WiFi and (b) other computers connected to the cable modem/router maintain their connection to the internet while my MacBook Air has lost its connection.
My test to see where the breakdown is occurring is to have four terminal windows up and running ping processes:
1) ping to 192.168.0.1 (my router) - this always stays live, with essentially no lost packets
2) ping to an external address (I'm using 74.125.136.94, a google.nl address) - this is my main test for access to the internet and where I see ping failures (I'm also testing with pings to other sites when the problem is occurring to ensure it's not something on the remote end).
3) ping to 192.168.0.13, which is a Synology NAS attached via ethernet cable to my main cable modem/router - this always stays live, with essentially no lost packets.
4) a login to the Synology NAS, where I am also running a continual ping to 74.125.136.94, and this external ping does NOT fail when the one from my MacBook Air does, it stays live with essentially no lost packets.
The problem will usually correct itself after 1-3 minutes (though the time is not consistent), and also gets corrected if I turn the MacBook Air's WiFi off and on again.
Any suggestions for what I can do to stop this problem?
Thanks
John

> 1. If the MBA is connected to the
> a. the Technicolor SSIDs, is the behavior the same (poziom-k testing shows that a second AP causes problems).
No. If connected to WiFI served by Technicolor, the problem does not occur (even if the other AP is connected to the network).
> b. can the Technicolor be replaced easily by an Airport Express/Extreme, to repeat this test?
Unfortunately, Technicolor in router mode is required by my ISP.
> 2. Instead of WiFi, if the MBA is cabled to the secondary AP, is the behavior the same?
Yes.
> 3. Has Wireless RF interference been ruled out for dropped connections?
Yes. A Windows machine and several iOS mobile devices work flawlesly for me.
> 4. If the MBA has a wired connection to the Technicolor, does the problem still exist?
No. The problem occurs only if connected through additional AP.
> 5. Have packets been captured at each interesting point in the topology to see where are packets drops occurring? netstat -s is probably worth looking at > such points. Wireshark (or similar tools) can help.
Not yet. I will not have a chance to do it for the next few days though :/

Airplay is constantly not working and connected to internet but not showing content

Similar Messages

Maybe you are looking for