Airplay issues in iTunes 10.4
Hi
Just about to purchase Lion but still running Snow Leopard. Upgraded iTunes yesterday though to 10.4.
Problem is this. I've got my 1st Gen Apple TV (connected to surround sound) and an Airport Express (connected to speakers) in another room hooked up via Airplay - or at least I did have!
Now, when I attempt to 'tick' to add these two speakers to the Airplay icon in iTunes it blinks (milli-seconds) as though it's trying to add but then doesn't on either ATV or AE. These worked beautifully before I updated iTunes. Is this a known issue? Would it be rectified (knowing the 10.4 update is geared towards Lion) once I have updated to Lion?
It's a pain in the rear so if anyone can help I'd appreciate. I've not really seen same on here so I guess it's just me?!?
Had the same frustrating issue... I have (3) Airport Express' and (1) 1st Gen Apple TV. All was working fantastic until I installed 10.4. I would select which speaker I wanted and it would display "Connecting to Airplay" (which I had never seen before) - and would think and think and then the dreaded unknown error code -15000 kept popping up. Then I decided to try and push content via iTouch and iPad and both worked without flaw. So I decided to reinstall 10.4 again with the same results. After that, I began suspecting a network issue.
I then went into my advanced settings within my Windows (Vista) Security Center - iTunes was selected, and still the same -15000 error code. After being in my Security Center, and noticed that iTunes Help did not have the the procedure correct, I began looking around and discovered a little note on my Vista Security Center that stated having 2 firewalls can cause some some networking conflicts (I currently have McAfee protection), which also has Firewall protection. So, after reading that friendly note on the Security Center, I turned off my Windows Firewall, which doing so still noted that I my Firewall was on -- but only via McAfee. Once I did that - viola - all speakers, including Apple TV connected immediately.
Similar Messages
-
Ok....I have a 2012 MBP that has Yosemiti installed. The airplay works from iTunes, but when I try to mirror from the desktop I get the "no device detected" message. Airplay on all of my other devices work fine. Has anyone else had this issue?
Hey Marco'96,
Welcome to the Apple Support Communities! I understand that you are experiencing issues with AirPlay mirroring in OS X to your Apple TV. The following resource includes helpful troubleshooting steps towards the end of the article, which may resolve your issue:
About AirPlay Mirroring in OS X - Apple Support
http://support.apple.com/HT201343
Thanks,
Matt M. -
IPad AirPlay issues since IOS7 upgrade
Hi all
Since the last ios7 upgrade i've had nothing but trouble with my AirPlay set up.
I have the following set up:
HP ProLiant N40L server running iTune server (latest build)
BT HomeHub 3 / TP Link TL-PA211 WiFi extender
iPad 3rd geneeration
iHome iW1 AirPlay speaker
Before the upgrade i would get some intermittent issues, but eventually after iPad restarts i could get AirPlay working. Since the upgrade 90% of the time my iPad will not see any AirPlay devices whatseover. After a reboot of the iPad (or more) it eventually sees the Airplay speaker. iTunes however on my server always sees the AirPlay device and has no problems whatsoever connecitng to it (please bear in mind that this is still on the same WiFi network).
On the occassional 10% that my iPad does see an AirPlay device, I connect, and then almost immediately the AirPlay device dissappears from the iPad.
I've spent 2 weeks now trying to sort the issue out. As my iTunes can see the AirPlay speaker without issues and play to it, I'm assuming it's part of the ios update.
Anyone got any suggestions, as i'm ready to throw in the towel?
Thanks
SimonHi
First, before you lose interest - I have a solution that works so well to get BT Home Hub 3 working with 'Airplay' and Apple TV and my iPad 4, that I am so far unable to 'break' it. Please do try to break it yourself, and could you report back here or mark it with stars or whatever so I know what happened in someone else's setup?
I appreciate what you are going through, all I wanted to do was get 'Real Racing 3' running for me and the kidz on the TV that is attached to Apple TV box. Sometimes the Airplay icon appeared, sometimes not, it was chance - really frustrating.
The nub of it is this - you 'reserve' certain aspects of how the HH3 services the wifi network, so it directs data/communications via these 'reserved' ports specifically assigning them to the purpose you need - in this case, 'stuff' (technical eh?) going to the Apple TV so that Airplay works.
Apple forums somewhere list these publicised ports, and you go into HH3 management (tap in the IP address of the hub in 'safari' to get there, then put in your password for admin - it is 'admin' if you didn't change it already). In short, you use one of the games/applications that already are in the list for 'Port Forwarding', and I modified the name of a new one I made to make it like 'Airplay attempt using BT alarm' or something, because I 'copied' the BT safe alarm app details to start my custom one off. Lost yet?! Go into the HH3 manager, go to the A-Z I think it might be in 'advanced' and get 'Port Forwarding' up.
Ok, here's the things to set - if you peruse the apps/games they already list in HH3 for this sort of thing, you will see entries under 'TCP' or 'UDP' headings, and it's these sort of things we want to reserve. I only set the single specific addresses (it's just a number to you and me) that were listed on the Apple site as being to do with Airplay:
There are only 2 bits to set - you hit the button on screen in HH3 manager, to 'add entry', then select in the box marked 'protocol' that you want TCP or UDP according to the info I dug up from Apple site below - don't worry it is not complex to do you are just editing a couple of figures on a thing you don't use. Incidentally, I left the first two entries as they were (1024 was in there already) because I am just timid! So set it as below.
TCP 1024 -
UDP 1024 -
TCP 80 80
Any 123 123
TCP 443 443
Any 554 554
TCP 3689 3689
UDP 5353 5353
I took a pic of mine, for records, and this is what is in that pic. You have to enter the self-same number (eg 123 as above) no less than 4 times, this gives the results above.
On the bottom right, there is a button that says 'apply', so you hit that and it saves this new-fangled custom designed list of reserved ports/addresses for your 'Airplay BT alarm' or whatever you called it. THEN YOU MUST ASSIGN THIS CREATION OF YOURS TO A DEVICE - THE APPLE TV.
That's the basics of what I did - I have since restarted the BT HOMEHUB 3 several times, the Ipad 4 several times, the Apple TV has updated its software and has been restarted twice. STILL AIRPLAY WORKS.
So, I am reassuringly presented with the Airplay icon whenever I 'upswipe' on my ipad from the bottom of the screen - iOS 7.1 is on my ipad obviously, but that did not change the hit-and-miss of the Airplay icon until I made these mods to the HH3.
Over to you - try and break my solution please, and let me know if it works for you as well, or not. All I know is, Real Racing 3 can reliably be brought to bear on the Apple TV thing, and the Airplay icon is now never missing.
One more point - I think I also set the Apple TV IP address to be static - my ipad has had this situation for some time, along with the 'lease' set to a couple of weeks or something, so it does not try to select a different channel for wifi frequently? PLUS, I set something in the ipad I think, long ago (did not affect this issue as far as I can see), so that when the ipad 'wakes up' it does not decide to search for a better channel or IP address or something - that caused loads of glitches it seemed, then I found out my BT HH3 was on the end of dodgy phone cable not hi-quality shielded...but hey, that's a different bucket of bolts.
Good luck and let me know an outcome please, best to all. -
No airplay icon in itunes 10.6.3
Hi,
I have recently purchase an AppleTV and I can get it to connect to the internet, I can push from my iPhone and I can see the music library on my PC but I cannot see the airplay icon in iTunes on the PC so I cannot push from the PC to the AppleTV.
I have tried reinstalling all Apple programmes on the PC but nothing changed.
They are both on the same network and that network has access to the internet (it is the personal hotspot on my iPhone)
The image below is a cut from the preferences screen in iTunes...is something wrong there?
Thanks!!Doesn't matter...solved...for others who have that issue try:
https://discussions.apple.com/thread/2669730?start=0&tstart=0 -
Problem with AirPlay mirroring with iTunes
Hi,
I have a new iMac (purchased April 2013) running OS X Mountain Lion and am having issue with AirPlay mirroring with iTunes via Apple TV 3 running the latest update.
I have no problem streaming ITunes music (audio) to my Apple TV 3 via AirPlay.
However, when I enable Airplay Mirroring to ATV3 (either via System Prefs or via the Airplay Mirroring menulet icon at upper right of the screen), 2 things happen:
1. My iMac screen gets mirrored to my HDTV via ATV3 as expected (good)
2. Music (audio) stops playing via ATV3 (bad) - this is the key issue I am trying to resolve
When i disable Airplay Mirroring, I am able to again play music via ATV3.
Am I missing a setting somewhere to enable BOTH video and audio Airplay mirroring from my iMac via ATV3?
Thanks,
KevinI think I have found the reason for my problem...
http://support.apple.com/kb/HT5404?viewlocale=en_US
Supported Macs
AirPlay Mirroring in OS X Mountain Lion takes advantage of the hardware video encoding capabilities of 2nd and 3rd Generation Intel Core processors. Hardware video encoding allows AirPlay Mirroring to efficiently deliver high frame rates while maintaining optimal system performance. The following Mac models have processors that support AirPlay Mirroring:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
My device is an older Model -
I can see my Airplay device in iTunes, but I cannot see it in Sound Output list. How to fix it?
I have Bang&Olufsen Beoplay A9 and using it with my mac air OS X 10.7.5
my problem is I can see my Airplay device in iTunes, but I cannot see it when I go to System Preferences > Sound > Output and because of that when I play a song from youtube, sound comes from my laptop. How can I fix it? thanks in advanceHello there sjbrosjbro,
It sounds like you are not able to print to your printer because it keeps timing out when you try. I would use the troubleshooting steps from the following article to help you get that printer going again. It may be something as simple as re adding the printer if you've already restarted both the printer and the computer already:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Can't connect to airplay speakers from iTunes
I suddenly can't connect to airplay speakers from iTunes on my new Macbook Pro - they are visible but cannot be selected. I can connect to them from other Macs and iPads. Can anyone help, pls? I have set the whole network up several times, rebooted system ie.
I had this happen to me on the odd occasion but now have it sorted. If I'm going to use my Airport Epress(s) I first make sure that my PC is connecting to the AE before I even turn on iTunes.
A problem I was having was that my PC was connecting to my wireless router by default (specifically when my laptop was turned off) and not to the AE. As a consequence when iTunes started it greyed out the remote speakers and sometimes the button was not even showing up.
Now that I ensure my PC is talking to the AE everytime I do not have a problem.
I do have one annoying thing with the AE setup though, if I'm playing music over the AE and I unplug any USB device (printer, USB Key, External drive etc) the wireless connection is broken and I have to start iTunes. I suspect it is a hardware issue relating to my particular HP PC as I have just reformatted and reinstalled Windows XP and it still happens. I can live with it. -
Why has Airplay icon on iTunes and Apple TV function suddenly vanished in 10.8.5?
So it was fine yesterday, as it has been for the past couple of months. Tonight - nothing, unable to watch films etc from iTunes library on my TV. Wifi etc all fine. Is something up in Cupertino? Over the weekend I suddenly couldn't send email from my iMac or my iPhone - iCloud seemed to have reverted to me.com; earlier tonight my iPhone 4S suddenly disabled itself - and no, nobody had put in the password number incorrectly. Three failings in three days ... anyone else seeing these disturbing gremlins?
There is nothing wrong with Apple and nothing that happens in Cupertino has any affect on AirPlay working for individual users.
The vast majority of AirPlay issues are the result of a network issue, troubleshoot the network. -
Zeppelin airplay from windows iTunes 12.1 cuts out
ok, this problem is driving me nuts. I have a stream URL setup in iTunes 12 on Windows 7. I also have a B&W Zeppelin AirPlay speaker (up to date firmware). I can airplay from iTunes to the speakers. Sometimes (not all the time) the stream play just stops with no error. The indicator goes from the Pause button to the Play button. So, I run some tests....
Change iTunes speakers to local. Cut out does not happen.
Reboot router - cut out continues
Run the same stream from my iPad to B&W - no cut outs!
This leads me to believe it is not the stream itself. It is not iTunes or Windows alone and it is not the network or AirPlay.
Does anyone have any idea what is going on? Any help appreciated...Try Can't connect to the iTunes Store - Apple Support.
And if that doesn't work go for a full tear down and rebuild as follows...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Where do i find the Airplay button i iTunes (12.0.1.26)?
Where do i find the Airplay button i iTunes (12.0.1.26)?
Hey there Kameldriver,
The location of the Airplay icon is just to the right of the volume slider at the top of iTunes.
Choose which speakers to use - iTunes Help
If it is not there, you can use the troubleshooting article to help resolve that:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Issues with iTunes Match on iPhone
I am having some frustrating issues with iTunes Match and my iPhone 4 iOS 5.
1) When using cellular data (3G), the songs simply do not play from the music app. It works fine when connected to wifi.
Under settings, cellular data has been enabled for use in the music app.
2) iTunes match constantly switches off spontaneously on iPhone. I need to go back to the settings to enable it every single time I use the app.
I feel that iTunes Match was a total waste of money, considering the only reason I invested in it was to have my library accessible from my iPhone.
Any help would be much appreciated!iTunes match doesn't work like that and if you don't like it then your best option is to turn it off and go back to syncing. However if you make sure that your device has a good Wi-Fi connection, re-downloading all your content shouldn't really be a big issue.
-
Issues with iTunes Media Folder resetting to default location
This is my 1st post to the Apple Support Community (the problem I have is with iTunes, but I believe it also has to do with the way OS X Lion is setup and the way Networked Drives are mounted in it) ...so I hope I've posted this to the correct place. Thank you in advance for any help I'm going to get here. I have no expirience with Mac OS X's (coming from a Windows background) so please bear with me, but I am a S/W Tester by trade so I'd like to think I'm resonably IT literate.
ISSUE:
I have a problem with iTunes and my Media Folder resetting constantly - my Setup is a MacBook Air, with an Apple Time Capsule 2TB which is providing my Wifi Network.
I want to setup iTunes so that it will permenatly point to my Data Folder on the Apple Time Capsule, so that when I download purchases, synch iPhones, or rip Music it will end up on the Apple Time Capsule and not on the MacBook Air's SDD Drive
I though I had managed to do this, but after I shut down the MacBook Air, and then logged back in to rip some music, iTunes had repointed to the MacBook Air's SDD, and all the CD's i ripped were saved there instead of the Apple Time Capsule. So far I have done the following;
STEPS CARRIED OUT SO FAR:
1) Connected the MacBook Air to the Wifi Network provided by the Apple Time Capsule - I can see the Time Capsule in the Finder app.
2) Gone to GO MENU > LOCATE SERVERS and selected the top level DATA FOLDER on the Apple Time Capsule....I believe that I've managed to create an ALIAS (Shortcut?) that points to this, and it's on my Desktop.
3) Next I went to SETTINGS > USERS > and made sure that ALIAS (Shorcut?) to the DATA FOLDER on the Apple Time Capsule is always loaded up on startup for my UserID
4) Next, I found my iTunes folder, and MOVED it from the MacBook Air SDD to the Apple Time Capsule's HDD over the Wifi Network.
5) I then went to ITUNES PREFERENCES and changed the MEDIA FOLDER it pointed to, from the MacBook Air's SDD to the one on the Apple Time Capsule.
6) Then I logged out and shut down the MacBook Air.
7) I powered on the Macbook Air, and logged in, then ripped some music - I then found that iTunes had created a new iTunes Folder for my User on the MacBooks SDD and all the CD's I ripped had been saved there. Also under the ITUNES PREFERENCES menu, it looks like iTunes had reset the location of the MEDIA FOLDER...
I don't know if this is an issue with iTunes or not - I'm assuming it's a setup issue on my part, and that maybe I haven't created a permenant link to the Apple Time Capsule as I thought I had. If it helps I was attempting to do something similar to whats described in this YouTube video; http://www.youtube.com/watch?v=mA399lEXRTE
Thanks again for any help
Regards
Codename21Codename21 wrote:
4) Next, I found my iTunes folder, and MOVED it from the MacBook Air SDD to the Apple Time Capsule's HDD over the Wifi Network.
if you really moved your entire iTunes folder, the next step needs to be launching iTunes while holding the option (⌥) key, clicking on choose library at the prompt, and selecting the iTunes folder you moved to the TC.
as for auto-mounting the TC's disk on startup, you might find this discussion interesting. -
Issues with itunes 10.5 on Windows 7 (32 Bit) When Trying to sync iphone 4S or older
I see a lot of people out there, specifically windows OS owners (xp all the way to 7), having issues with iTunes 10.5. Here are the following issues I've encountered (some may only have one problem, others my have a combo pack of problems).
1. iphone 4S or older won't sync or backup
2. iTunes store won't open
The issue I found after using the diagnostics tool in iTunes (which is useless in identify scripting issues or major communication issues), reviewing the windows event log, and reinstalling all apple software and components, was the fact that my spyware and anti virus software was causing a communication error within apple's software. I use spyware doctor with anti virus. I had to uninstall spyware doctor in order for iTunes 10.5 to work. After that, everything worked well and I did a clean install of spyware doctor.
If the issue still persists, you might have to reset your internet protocol (TCP/IP). You have to run a command prompt as an administrator and enter the following: netsh winsock reset
Visit this Microsoft link for more info about resetting your IP: support.microsoft.com/kb/299357
Finally words: Apple, like all other software companies, continually encounter software glitches and issues because they don't test products correctly before bringing them to market- this has been a reoccurring theme for the last 2-3 years. The most important aspect of using any software should be functionality, efficiency, ease of use, and above all "A Positive End User Experience." Wasn't that Steve Job's mantra? We can all hope that Apple embraces his philosophy and vision for the many years to come. This, above all, is not a great start for Apple moving forward without their true inspirational leader.Here is what worked for me for both 10.5 and 10.5.1 after hours of frustration with Itunes stopping and shutting down in the middle of a sync or tranferring Apps downloaded on my Ipad2 or Iphone 4:
Start iTunes in iTunes Safe Mode:
1. hold down the Shift and Control key together and click to start iTunes.
2. when you see the iTunes icon in the task bar, click on it.
3. you will get a box that says "iTunes is running in safe mode. Visual plug-ins you have installed have been termporarily disabled." [I don't know what plug-ins I installed but you should clearly see that these so-called visual plug-ins are likely the cause of your issues];
4. click Continue to open iTunes.
You could already have your device connected to your computer or do it after opening iTunes in its safe mode.
Now press your sync button and everything should work fine.
I also disabled Genius in iTunes preferences but I'm not sure if this is one of the issues causing these types of problems.
I hope this works. This may be the workaround for all of us Windows 7 64-bit folks. -
I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !
I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files? -
How do I get rid of lip-sync issues with iTunes 10.2.2.12?
Hi Everyone.
Firstly, a very Happy Easter!
I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
The system stats for my PC are at the bottom of the post.
The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
I suppose my main questions are:
Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
Is the spec (below) of my PC causing any issues.
Here's an Easter Egg for anyone able to help!!
All the best
BandAidUK.
System Information
Time of this report: 4/24/2011, 10:13:44
Machine name: DEREK
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension 8300
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory: 3326MB RAM
Page File: 1273MB used, 3941MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
Display Devices
Card name: NVIDIA GeForce 6200
Manufacturer: NVIDIA
Chip type: GeForce 6200
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
Display Memory: 512.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0012.6099 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0221
SubSys ID: 0x02F3196E
Revision ID: 0x00A1
Revision ID: 0x00A1
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
Description: Creative SB Live! Series
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: P16X.sys
Driver Version: 5.12.0001.0129 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/14/2003 16:58:12, 1296384 bytes
Other Files:
Driver Provider: Creative Technology Ltd.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 8000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
Description: SoundMAX Digital Audio
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
Manufacturer ID: 65535
Product ID: 65535
Type: WDM
Driver Name: smwdm.sys
Driver Version: 5.12.0001.7000 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 3/22/2005 11:08:40, 260224 bytes
Other Files:
Driver Provider: Analog Devices
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 100, 192000
Static/Strm HW Mix Bufs: 33, 32
Static/Strm HW 3D Bufs: 33, 32
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): Yes
Registry: OK
Sound Test Result: Not run
Sound Capture Devices
Description: Creative SB Live! Series
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: P16X.sys
Driver Version: 5.12.0001.0129 (English)
Driver Attributes: Final Retail
Date and Size: 8/14/2003 16:58:12, 1296384 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
Description: Hauppauge WinTV 88x Audio Capture
Default Sound Capture: No
Default Voice Capture: No
Driver Name: hcw88aud.sys
Driver Version: 2.125.28070.0000 (English)
Driver Attributes: Final Retail
Date and Size: 3/12/2010 09:47:58, 13440 bytes
Cap Flags: 0x41
Format Flags: 0xCC0
Description: SoundMAX Digital Audio
Default Sound Capture: No
Default Voice Capture: No
Driver Name: smwdm.sys
Driver Version: 5.12.0001.7000 (English)
Driver Attributes: Final Retail
Date and Size: 3/22/2005 11:08:40, 260224 bytes
Cap Flags: 0x41
Format Flags: 0xCCC
DirectMusic
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
Registry: OK
Test Result: Not runSelect *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
In List view, you can turn off every column (in menu View > View options) except track name.
Maybe you are looking for
-
Why don't all my iTunes Library songs show up in my music folder
I have a lot of music in iTunes (16,000 plus songs) and they are stored on a LaCie external hard drive. Just recently I discovered that when I click on the file folder where all the music is stored, only files starting with A through B are listed. I
-
HP Laserjet 4P has a 1" toner stain that runs down the left side of page.(front and back)
Hello all, This is my first post here and I hope someone can help me. We have a HP Laserjet 4P that we have used for a few years and recently have had a problem of a 1" toner stain that runs down the left side of the printed page(both front and back
-
My iMac is starting to lock up from time to time. Doesn't appear to be dependent upon what or how many applications are open.
-
Problems with awt.Toolkit on Tomcat
Hello! I'm trying to get the Default Toolkit (java.awt.Toolkit.getDefaultToolkit() ) to determine the scrren size of the client, and Tomcat keeps throwing an Exception - now it's the website's Tomcat and the one on my localhost - there it worked.. Is
-
I need to retouch images of silver jewelry, is lightroom the software that can help me?
I need to retouch images of silver jewelry, is lightroom the software that can help me?