AirPlay Mirroring from 10.8 Won't Start Sending Video (or Audio)

This question may have been answered, but searches for me keep coming up with people who don't have the AirPlay Mirroring icon showing up in the menu bar, which isn't the problem I'm having.
In my case, the Mac is compatible (latest-gen Air, 10.8.5), and the Apple TV (3rd gen, latest software) shows up in the list in the menu bar and Displays pref pane (as well as the Sound Output pref pane).
However, if I select the ATV, the Mac's screen resolution will change to what looks like 1080p with no corresponding response on the ATV (I have it set to conference room mode), and the right side of the menu bar and Displays pref pane both hang on a beachball for a consistent period of about 15 seconds.  After a fixed timeout, the AirPlay Mirroring request is cancelled and the Mac goes back to the default resolution and no mirroring setup.
A smiliar thing happens if I select the ATV in the Sound Output pref pane--no sound from the ATV, and the pref pane hangs on a beachball for a while before eventually switching back to the internal speakers.
The devices are both on the same WiFi network, which shouldn't be overloaded or have any interference, but it is a corporate network, so I'm assuming that there is some port or protocol being blocked that is interfering with the actual mirroring connection even though the discovery is working okay.
My question, then, is:
1)  Is there anything I'm overlooking that would cause this to work?
2)  Assuming no, does anybody know what port might be blocked that would cause this behavior?  I want to know what, specifically, I'm complaining about when I go to the higher-ups in the IT department to try and get it bypassed.

Hi felix69,
Welcome to the Apple
Discussions
iChat uses ports above port 1024 and consequently
like an On-line game needs these ports enabled in the
modem and any router you have..
iChat also uses the Quicktime Streaming speed and
this needs to be set to 1.5Mbps/T1/LAN in System
Preferences > Quicktime > Streaming tab
Can you tell us what you have done so far ?
11:22 PM Wednesday; February 14, 2007
Thanks for reply - my user name now was felix69 but I am now helenowen (sorry)! I hadn't replied because I managed to ichat my sister with no problems!! But alas trying to connect with my Dad's ibook I am having no luck in successfully communicating via ichat. I am oerating on the 1.5Mbps/T1/LAN. How do I check that i am running on ports 1024 or above??
Cheers
Would aprecite prompt reply as trying to ichat today!!!
H

Similar Messages

  • No Audio in AirPlay mirroring from my mac (OS-ML) to Apple TV

    I get a picture but no audio.
    I saw this discussion:
    No Audio when Airplay Mirroring from Mac to Apple TV
    BUT in my case I can't change the sound settings to AirPlay.
    When I click it with the cursor, it tosses me back to Internal Speakers, and won't let me select AirPlay.
    Any suggestions?

    I'm in the same boat.
    Found an instruction elsewhere to flip audio to AppleTV BEFORE switching to Airplay Mirroring.  Should not be necessary (several extra clicks where one should suffice), but if that's what I have to do, OK...
    But as these users are reporting... it doesn't work.  I click on the AppleTV option and it keeps reverting to Internal Speakers.  I'm not able to actuall select the AppleTV for audio output.
    So, ***?
    --P

  • Hello. I've Apple TV 3rd gen and MacBook Pro 2013 all with latest updates. AirPlay works fine till I don't start streaming videos from YouTube. After that AirPlay icon from MacBook menu bar simply disappears. Could some help. I'm using 2 Mbps Internet

    Hello. I've Apple TV 3rd gen and MacBook Pro 2013 all with latest updates. AirPlay works fine till I don't start streaming videos from YouTube. After that AirPlay icon from MacBook menu bar simply disappears. Could some help. I'm using 2 Mbps internet connection.

    Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
    I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
    Playing light, locally hosted steam sidescrollers  like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
    Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
    It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
    Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps.

  • AirPlay Mirroring from my MacBook

    Can I AirPlay Mirroring from my MacBook?

    AirPlay
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay

  • Airplay mirroring on Macbook Pro won't play sound

    Ok, so I just updated the Apple TV to 6.0.2. Airplay mirroring works fine on my iphone and ipad. But when using it on the MBP, it won't let me hear the sound. The output to sound for the Apple TV is selected in the Preferences. I've restarted the MBP and the Apple TV. I've also Reset the Apple TV, but still nothing is working. It's not an app or music; even when I just show the desktop, and hit the volume buttons, usually you hear the tone for the button on the Apple TV. This does nothing now. I just tried Sudo killall coreaudiod, didn't work. Please help!

    This is what the sound setting show.

  • No Airplay Mirroring from Ipad

    As many other posters in the community, I have trouble with mirroring and connecting to AppleTV, (no mirroring option appears....)
    Even though my Ipad 2 (128Gb....) says I'm on the same network as the AppleTV, i can only send (or stream...) photos or movies from Netflix to AppleTV ..... no problem...(I know you can do that from within AppleTv... just trying out this option...)
    I can't get to mirror images I need, from Dropbox or Numbers or Keynote or Pages, when I need to do presentations in the office....??????
    Using IOs 8.0.2, on it and the latest AppleTV software, I can only do this from My IPhone 5..... which has no problem synching with it..... but the reduced screen doesn't help, since it becomes akward and cumbersome to handle .... not to mention it seems rather desperate.... (not good clientwise...)
    This is obviously a glitch in IOs software....or am I missing something? I've used previous IOs software for this purpose before, with no problem...
    Can anyone give me  a hint to the solution..... Or am I just another Apple Sucker, who misses Steve Jobs's management and his high standards of quality?
    Regards Apple...ites!!!

    Hi DonGM,
    Welcome to the Apple Support Communities!
    I know that issues with AirPlay Mirroring can be very frustrating when it is not working as you would expect. Please read over and use the following link as a resource. Also, if you are still having an issue and not seeing Mirroring as an option, please let me know exactly what you do see.
    iOS: Use AirPlay Mirroring
    Regards,
    Joe

  • AirPlay Mirroring from ML to Apple TV has 3 minute lag

    I have an iMac (Late 2011) running 10.8.2 and an Apple TV (3rd gen) running 5.1. When I turn on AirPlay Mirroring, it eventually starts, and when it does it has a tremendous lag that refreshes every 3 minutes or so. I have the settings optimized for the TV. Apple TV works fine when mirroring iPad (3rd gen) and iPhone 4S. I would love to sit on my couch and use my computer, but this is making it impossible.

    Welcome to the Apple Community Philip.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.

  • AirPlay Mirroring from Mac to Apple TV intermittent sound drop-off

    I can't stream iTunes or Spotify to my Apple TV without getting intermittent sound drop-out (say every 30 seconds) when I use AirPlay mirroring through my Mac. This odd thing is streaming through my iPad or IPhone to Apple TV is perfectly fine; so is using my Mac to stream to my Sonos speakers. I can even stream iTunes pefectly fine through only the Apple TV alone - so it's nothing to do with my broadband connection
    I have today performed upgrades to the Apple TV and my Airport Express firmware but the problem persists. Anyone else experiencing this or found a solution?

    Hi, same here for me. Using AirPlay for streaming music from my Mac Mini (iTunes latest version) to my ATV2 (software latest version) has intermittent drop-outs (about every 10 to 15 sec for 5 to 10 sec). At the same time streaming to my Airport Express station in the kitchen works fine. Using the VOX player streaming from the Mac to the ATV works fine, only that I can only stream to one destination. Tried streaming from iTunes to ATV only, the problem remains. Streaming video - even HD - works fine. Using the ATV to select music from my Mac's iTunes library works fine, too. Still I want to stream from my iTunes on the Mac to several destiations including the ATV. Seems to me to be a problem of iTunes. I think the effect appeared after an update of iTunes or OSX, because it had worked fine before, already.

  • HT201335 Can you Airplay Mirror from iMac to Apple TV?

    I want to play a DVD on my iMac and airplay mirror to my Apple TV. Is this possible?

    If you have a newer Mac yes, I don't remember the cutoff date but I think it's mid 2011.
    If yours is older than that there's a program called Airparrot you can download that will let older Macs do Airplay. For me it worked great and it's only $10. It has a 20 minute trial so you can make sure it works before you buy it.

  • Can't get video via Airplay Mirroring from iPad to TV

    I am trying to watch NFL Rewind using my iPad2 through Airplay Mirroring to Samsung Smart TV but, I am only getting an audio and not the video..  Can someone PLEASE help me how to get the video?

    Make sure the App you are trying to use supports Video mirroring some don't for copyright reasons.
    If You can mirror your iPads home screen, then mirroring works and its up to the actual App to allow the mirroring of their Video source.

  • HT201335 Can I use airplay mirroring from my MacBook?

    so, can I?

    No.
    AirPlay Mirroring
    Requires a second-generation Apple TV or later. Supports the following Mac models:
    iMac (Mid 2011 or newer)
    Mac mini (Mid 2011 or newer)
    MacBook Air (Mid 2011 or newer)
    MacBook Pro (Early 2011 or newer)
    http://apple.com/osx/specs/

  • Airplay Mirroring: What is the maximal resolution for non-video content?

    I want to mirror a Safari window from my Mac Mini (latest model) to a monitor using an ATV3. Whenever I do that the resolution on themonitor is rather limited. Is the Airplay Mirroring limited to 720p when the mirrored content is not a video?

    It really depends on the display you are trying to connect with.   I would contact the author of SwitchRes and let them know that, your Mac age, and model, and they might be able to suggest the proper setting.

  • After updating to iOS 8.1.3 the AirPlay mirroring problem seems to be an result of this. Audio comes out but there's a black screen.

    Mirroring my iPhone 6 Plus worked fine before the the iOS 8.1.3 update, but now only audio plays with a black screen, occasionally saying "an error has occurred, please try again later". I have tried many ways to fix this problem, but has been unsuccessful. This happened multiple times in the past too. I'm so mad they never improve and fix this problem. >:( Grrr...

    If you are just getting audio then that is not mirroring. Are you going to control centre, tapping airplay and toggling ON mirroring?
    iOS: Use AirPlay Mirroring - Apple Support

  • Macbook won't start up while firewire audio interface is plugged up

    I have a m-audio firewire solo and a presonus firebox, both firewire interfaces. My macbook won't start up when either is plugged up. If I restart with it plugged up I just get a grey screen. When I disconnect it I boot up fine. Is this normal or is something wrong here?

    Wire Bus:
    Maximum Speed: Up to 400 Mb/sec
    FW Solo:
    Manufacturer: M-Audio
    Model: 0x10062
    GUID: 0xD6C0B007E03B7
    Maximum Speed: Up to 400 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    FW Solo Unit:
    Unit Software Version: 0x10001
    Unit Spec ID: 0xA02D

  • Urgent help please - iDVD from iLife 09 - Won't start normal, can't quit ..

    All,
    I was in the middle of a job and things were going fine. Incorporating some changes to template supplied. I really don't know what I did, but now I cannot exit iDVD. Each attempt to quit ends with a "unexpected end", and any start of iDVD starts with the last one there. I can drag and drop existing projects but can't start a new one. I've tried deleting prefs file - didn't help. I did the "boot the OS X install and fix permissions" ... still nothing. It just seems stuck with this inability to exit cleanly. Do I need to reinstall, if so, what's the best way? Should I delete the one I have and install from iLife '09 disk?
    I'm right in the middle of trying to finish up a job.. Thanks in advance!!

    SDMacuser wrote:
    Sounds like you have adequate boot volume space. What I would try first is to copy all video assets for iDvd to the boot volume since iDvd likes things where it can easily find them. Then I'd eject the 3rd party ext. HHD. Pro apps give you a bit more latitude in this regard but iDvd tends to be picky about what it will or will not use (at least when compared to apple's pro apps / DVDSP).
    Btw, you did properly format the ext. firewire HDD with apple's disc utility, did you not?
    Message was edited by: SDMacuser
    Location of the assets has never been a problem and isn't here (nor should it be, else Apple wouldn't give us the ability to put projects elsewhere) .
    It can work with every bit of the asset if I drop the project file onto the dock icon. I also have and use Final Cut Studio Pro so I'm well aware of its capabilities. All drives, eSATA, FW800, and USB are formatted correctly for Intel based Mac.
    I hooked up the backup system drive, copied the plist from there, and renames all the DVDPROJ files so iDVD could not find them. A bit Draconian, but so far it is letting me back in normally, and exit normally. I'll have to retrace the steps, but as long as it holds hopefully I won't hit it again.
    Interestingly, after my first attempt at deleting the prefs file, iDVD did not generate a new one, which was odd. So hopefully I'm back to a solid starting point.
    On a side note, is there ANYWAY at all to add additional font sizes to the drop down list for text? I know in earlier versions there were sliders that allowed for font sizes to be changed. There are a few places on this project (4:3) where I'd like to keep things in bounds for SD NTSC output, but have text a bit larger.
    Thanks again...
    Jay S.

Maybe you are looking for

  • How do i see who is using my airport extreme

    Looking for help in determining who is connected to my airport extreme and can I monitor their activity?

  • Chart issue

    Hi Friends, For my requirement, i need to draw one curve in the column chart.In the chart i am having one characterstic and one keyfigure. Can anybody explain how to achieve this. Regards Madhu

  • Audio Playback not working?

    Hello Just recently opened iMovie 08 after a while away and seem to have a problem with the audio playback. When skimming in the source video you can hear that there is audio, however when you want to play it by hitting spacebar there is no audio. Wh

  • Data plans available for macs

    HI, what data plans are available for macs so that I can get internet access when none is available? Also, are any of these month to month???  Thank you!

  • Mail Options does not load

    I'm running Messaging Server, with the information as follows: iPlanet Messaging Server 5.2 HotFix 1.12 (built Feb 13 2003) libimta.so 5.2 HotFix 1.12 (built 12:53:23, Feb 13 2003) SunOS red20 5.8 Generic_117350-02 sun4u sparc SUNW,UltraAX-i2 After a