Airplay movie stops and start over again

I have problem with AirPlay while watching play-channels from my iPad. After a while the program just starts over again. What can I do to fix this?

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Similar Messages

  • My video download gets about 2/3 of the way through, stops, and starts over

    My video download gets about 2/3 of the way through, stops, and starts over (as if I had never downloaded anything). I have DSL, and it's the only video downloading. Why does it stop and start all over again, over and over? It's really bumming out my iTunes experience. Oh, and I'm running XP, not XPpro.

    Let it go... these DL's take forever, depending on the spped of your connection and the traffic on the servers.
    If by morning it is still sitting there restart and the DL should pick up from where it left off.

  • I HAVE A USER ID, A SYNC KEY BUT NO WORKING PASSWORD ; CAN I CANCEL THIS ATTEMPT AND START OVER again.

    i followed all the directions e ,mailed to me ,but when i tried to sync my iphone the error message said incorrect password. I then asked for a second set of instructions and redoubled my efforts and still no sucess i tried to reset tghe password but I don't have a sync tab setup under firefox/tools/options. If allowed to cancel the sync key and start over again knowing the pitfalls I have encountered I would be succeswful. i THINK FIREFox is the best system I enjoy using it every day. thankyou

    On the iPad tap Settings > iCloud
    Toggle Documents & Data off then back on then restart your iPad.
    Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    On the iMac open System Preferences > iCloud
    Deselect the box next to Documents & Data then reselect it then restart your iMac.

  • Pls have been having issues upgrading to the os 10.9. downloads encounter error when it gets to 955mb and starts over again-.suggestions pls?

    pls have been having issues upgrading to the os 10.9. downloads encounter error when it gets to 955mb and starts over again….suggestions pls?

    http://www.apple.com/support/mac/app-store/contact/

  • I can't play youtube videos. I will play for about 12 seconds, then stop, and restart over again. I tried youtube on IE and it works there. What do you suggest I do?

    I can't play youtube videos. I will play for about 12 seconds, then stop, and restart over again. I tried youtube on IE and it works there. What do you suggest I do? edit

    This problem can be solved selecting manually the video resolution.

  • Recording stops and starts up again

    So i was recording a gig and it would stop and start up again throughout
    the event.  I was not running anything else on my laptop but onlocation.  My virus protection was turned
    off since I was in a non-wifi location.
    Here are my specs for my laptop.
    HP-HDX18
    Intel(R) Core(TM) 2 Duo CPU
    T9900 @ 3.06 GHz-3.07GHz
    Memory 6GB
    64 Bit Windows Vista - Waiting for my Windows 7 upgrade to come in.
    500 GB HD
    Rating of 5.4

    When I first tried it out...  it was a band new laptop.  Nothing was running
    on it except on location.  I turned off the screen saver and virus
    protection.  There was no pattern of when it would glitch it would just do
    it.  Some a few seconds apart to a few minutes apart.  Yes my disk very
    defragmented which I always do after installing and uninstalling programs.
    So I know everything was up to par at that time.  I also have premiere pro
    cs4 on it and it runs fine with no hiccups.  Just on location does this.  I
    kind of notice at one time it seemed like it would hiccup when the audio
    level dropped.  But then again it would do it when someone was on the mic
    talking too.  So I'm clueless... and I believe its going to be very hard to
    diagnose.

  • HT4889 Hi. I`ve just started transferring from my old Imac to a new Macbook, using the WIFI. But I realize it will take days to get it done. Can I cancel the process, and start over again using the thunderbolt port? Without causing any trouble?

    Hi. I`ve just started transferring from my old Imac to a new Macbook, using the WIFI. But I realize it will take days to get it done. Can I cancel the process, and start over again using the thunderbolt port? Without causing any trouble?

    See Pondini's Setup New Mac guide for possible answers.

  • Previously downloaded songs stop and start over during re-download.

    I have several questions, and I'm hoping that someone can help me out with at least one of them. I have a 4th generation iPod Touch, and recently I had to start syncing to another computer after all of the USB ports on my computer stopped working out of nowhere (help on that issue would also be appreciated). Everything seemed to be working fine, I was manually managing my music and burned some CDs to transfer to my iPod. They transferred smoothly, and then afterwards I moved all of the tracks on the computer onto an external hard drive and deleted them from iTunes because the memory was getting too full. I hadn't even plugged the iPod back in or synced it wirelessly after that, but out of nowhere all of the music from the CDs and 78 tracks that I purchased on the iPod just deleted. I got all but one of the purchased songs back, and with that one, when I re-download it the meter fills almost all the way and starts over (this is all being done from the iPod itself). It has been doing this for several hours. In attempt to move all of the music from the CDs back, I took the music from the external hard drive and manually moved it to my iPod through iTunes. When I look at the iPod in iTunes, it appeared as if all of my music was back. On the device, however, the CDs still weren't there. I eventually gave up hope and ejected my iPod, only to realize that some of my music purchased on the iPod had lost its cover art. In effort to fix this (and this has worked before), I erased all of said songs and started to re-download from the Purchased list in iTunes (on the device). Now, all of the songs in the process of being re-downloaded have a gray music note next to them in the Downloads list and either say "Download error", act like the song mentioned earlier, or do nothing at all. I really just want my purchased music back, so if you know anything about the issue or have experienced something similar, please help me!

    I suggest for you to add all the songs to your iTunes library. Once everything is in place, sync it to your iPod. You may also try wireless syncing as well.

  • HT3819 My new Apple TV works fine but turns off Home sharing at regular intervals. This requires me to re-enter my itunes password and start over again. It is not my computer. I've checked and home share is still on in itunes. Any advice on where I should

    I just installed Apple TV. Works fine but turrns itself off at regular intervals of about 30 minutes. This requires me to re-enter my Apple ID and re-start all over again. Wjen I check iTunes on my computer, home sharing is still turned on. THis leads me to think the problem is in how I configured Apple TV on my HDTV. Any advice on where I should look?
    THanks in advance.

    I have had no luck. After an hour with phone tech support I have re-installed the current Apple TV software update., re-booted the entire system three times., checked each of my two Airport Express's.,unplugged and re[plugged in every cable,  ad infinitum, ad nauseum and still no luck. I have also decided iTunes 11 *****. Not near as intuitive especially with regard to moving stuff around between my playlists, etc.
    Alright guys, is this a problem because of iTunes 11? Is Apple releasing stuff before adequate debugging? Did Steve take his high standards with him?

  • When typing the cursor will stop typing and you willhaveto click again where you stopped and start over

    When in a program (IE 11 or Word, Outlook, etc..) my User will begin typing. After a few characters the system will just stop accepting the typing. The User will have to Click in to the field to get the cursor back to the correct point & begin typing
    from that point.
    This seems to happen very frequently for all my users.  We recently deployed new PCs with Win 7 32-byte on them to everyone.  Has anyone seen this happen and have any remedy for it?
    I have replaced the keyboard thinking that is the issue but upon further research I am leaning more toward it being a Windows 7 issue.
    Les Rose Network Administrator

    Hi,
    This issue may be caused by the below reasons:
    The mouse. The cursor missing from the current page may be caused by the mouse lost its focus point, this may because of the mouse itself or some other elements(Mouse pads and mouse drivers) which may affect
    the function of the mouse. If laptops, please try to disable touch board.
    Other applications. Please check if there are any applications(Usually some virus or scripts) running automatically when typing, some applications may call the cursor out when it starts.
    Network connection. If you use the wireless network, please make sure the connection is well configured on the client side, check WLAN NICs and the driver.
    The printer driver. In addition to this, please also verify the PC have all the other drivers up-to-date.
    Please take a health check and update the anti-virus databases, if possible try a clean boot , also change a mouse and check the other aspects and see if the problem still exists.
    Hope this may help,
    Best regards
    Michael
    If you have any feedback on our support, please click
    here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • As a novice emailer, I keep getting "Firefox prevented this page from automatically redirecting to another page" and I have to close and start over again EVERY TIME.

    I don't use this computer's new gmail very often. Therefore, I had some 150 emails that I was trying to go thru & delete if possible. Many emails gave another site to go to complete my understanding of this email. But "Firefox prevented...." statement appears on the top w/ only a blank screen. I try to go back a page...nothing happens. I have to close all the tabs and get out of it completely. Then I have to click on Firefox icon...go to gmail...select the same email if there was more to read on it or just skip to the next new email. Very frustrating to a computer-illiterate. I don't understand any of the computer lingo (jave...etc); it took me 1 hour to figure out how to get to this space to type in this question. I have already failed 3 times in asking/typing in the question box. PLEASE try not to give me technical phrases.....left, right, top, works best for me.... mahalo, cecile

    I don't know if this is still a problem but to stop it go to Firefox>Options>Options>Advanced>General Then third line down there is a box to remove the warnings. (These instructions are for Firefox4; I don't know how to access this from other versions.)
    I'm also not sure whether this just removes the service of stopping redirection or whether it just removes the warning so beware.

  • Why can I only download 25 mb of itunes 10.6 and at 25.1 mb, it resets and starts over again????

    This is making me want to throw the iphone, the iMac, the windows pc (because it has itunes on it) and anything else related to apple into the freaking ocean and even stop eating apples.  I have been searching the web rying to find answers and always get sent to the "support" community.  Jock straps and bras are support... this community is a place for frustrated users to vent--thats it!  I never once seen anyone from apple get on here and help out.  The only support you get from apple has to be bought.  I don't even know why I am complaining about free software...IT'S FREE, hence the lack of apple support.  Oh well, I will just add the 5 minutes of wasted time I used to type this to the hours and hours of wasted time I have spent dealing with this.  I hope everyone here (besides apple "support team" has a great day, night or whatever it may be where you are.

    iTunesux wrote:
    this community is a place for frustrated users to vent--thats it!  I never once seen anyone from apple get on here and help out. 
    Had you bothered to read the terms of use that we all agreed to when signing up to post here, you would have seen explicitly that this IS a user to user technical support forum and Apple has no presence here.
    Think you could stop ranting for 2 minutes, pull your head out of your rear-end and provide some details of the issue you're having? 

  • HT201412 my new ipod touch 5 will not turn on!!! im mad about this can someone helpp me or tell me what to do i tried alot of stuff my ipod just has the spinning circle it will turn on but 5 seconds later it stops and starts spinning again.

    So today I try to reset my Ipod. But it doesnt work!!! It will turn on for about 5 seconds then shut down and the spinning circle will appear. I tried resetting, but it didnt work. someone please help me before I break this thing!!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I phone frozen Can anyone help, my iphone is frozen with a screen that shows Itunes logo an arrow and USB cable. Tried to reset, Apple screen comes up, the itunes screen, then shuts off and starts over again. Any ideas, this happened while updating.

    Help my iphone is frozen in a screen with iphone logo and usb cable.  Happened while I was updatting.

    plug it in youre computer and hold the power button and the home button for 30 seconds and then it should have a blck sctreen then press the on button for 15 seconds and an apple logo shoul appear. please answer my problem.

  • Limited history available with "go back" button -- maybe 30-40 pages, then must go to initial page and start over again. Can I take page limit off of Go Back button?

    When using "firstview.com" and scrolling through pictures, I wish to return to my initial viewing page. I use the "go back" button and am able to return 30 or so pages, and then it does not allow further "go back." Can I increase or eliminate the limit on the capacity to go back using the go back button?
    == This happened ==
    Every time Firefox opened
    == n/a

    You can try to increase the pref '''browser.sessionhistory.max_entries''' on the about:config page.
    To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
    If you see a warning then you can confirm that you want to access that page.

Maybe you are looking for

  • Check print report PaymentAmountText field gets spaces while using RPAD Fn

    Hi, In the check print report we are using the PaymentAmountText field to print the amount in text. After printing the remaining spaces should be filled with '*' I used the below command <?xdofx:rpad(PaymentAmountText,100,'*')?> But the output is as

  • STATIC NAT

    Hi, I am facing a problem in static nat. I am having a 1760 router with 12.3(6) version of ios. i have configured a static nat using the command Ip nat inside source static x.x.x b.b.b.b All of a sudden the nat was not happening. i have enabled the d

  • Adding view link programatically

    Hi, I have created a view link programatically but dont know how to add it to AM.Can anyone tell me how to add this view link to AM Programatically. Thanks, Anupama

  • PSCS3 Mac: Can't get Applescript to open "desktop:folder:file.jpg"

    I have Photoshop CS3 and am scripting a lengthy workflow, and part of it requires that I get Metadata out of files using Photoshop. I can not get Photoshop to open a file. Once I have the file open, I can get the metadata out using UI scripting, but

  • MARS 4.3 and NAC (CSACS 4.2) logging

    Hi I'm trying to get MARS 4.3 and my Cisco ACS 4.2 server working together to display NAC events on MARS. I've added the server which runs CSACS under Security/Monitor Devices, added the reporting application of Cisco Secure ACS 3.x (does this matter