AirPlay no longer recognized by iOS devices.  Is recognized by OSX devices.

I've trolled the discussion forums but to no avail. Airplay was working last night on my iPhone and iPad, but it no longer is recognized: I don't have the AirPlay icon in the doc or in the volume controls within the apps that it used to appear in. It is recognized by my MacMini and MacBook Pro within iTunes.
I haven't changed any settings. I reset all my devices, including my AirPort Express. Also, all software and firmware are up to date.
Thanks

I finally got the iOS devices to work. I had to power them down and restart them several times, but it worked. This seems to be an issue that will hopefully be resolved with an iOS update in the near future.

Similar Messages

  • Airplay no longer works with IOS 7.0.3?

    I have uploaded IOS 7.0.3 to my I-Pad but now Music does not offer Airplay through my Airport Express and music system as it used to - is there any fix?  Airport Utility shows a good connection and Airplay is enabled.  The system works OK with my MacBook Pro

    If you don't see the AirPlay icon in the Control Center:
    1. Turn off router, Apple TV and iPad
    2. Turn on router and then wait 30 seconds for it to complete start-up process
    3. Turn on Apple TV and then wait 30 seconds for it to complete start-up process
    4. Turn on iPad (wait 30 seconds) and test AirPlay

  • Imap email on iOS device but on on osx device

    I've recently noticed that emails are coming though to my ios devices but not always to my Macs.
    Is there any reason why this would be?
    All accounts are setup as IMAP accounts, I can view the emails on the server (and the ios devices), so why aren't they displaying on my Macs?
    Any ideas greatly appreciated.

    Sorry I hadn't updated that in a while. I am completely up to date on all pieces of equipment. IOS6 & OSX 10.8.2.
    I had a play around with the mail server last night and if I restart the mail server it seems to re-serve the emails.
    Obviously its completely impractical to restart the server every time i need to get new email.
    I've opened the "Activity Monitor" in mail and that just seems to be fetching headers, updating cache, fetching new mail, connecting to server and syncing with server. These just seem to be trying to do something but not doing a lot.
    I've tried taking all accounts offline and then putting them online again, no change
    I've tried sychronizing all accounts, no change
    I've tried removing the caches, no change
    One of the reasons i noticed it was because i went from receiving 100's of emails a day to probably around 10!
    I have 7 imap accounts setup.

  • TS1538 iOS: Device not recognized in iTunes for Windows doesn't fix my issue

    I followed the instructions in this link but it has not fixed my problem. After I have done the screenshots and go into the device manager, my iphone is still not recognized in any of the devices.  Any suggestions?

    Hey there andrijfrommississauga,
    I have an article here for you that will help you troubleshoot this issue with iTunes not recognizing your iOS devices:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Ever since upgrading to iTunes 11.0, I can no longer sync Contacts and Calendar from my iMac (10.7.5) To my iPad2 (6.0.1) via Wi-Fi.  I believe All my settings are correct.  Device is recognized and sync From iPad is possible.

    Ever since upgrading to iTunes 11.0, I can no longer sync Contacts and Calendar from my iMac (10.7.5) To my iPad2 (6.0.1) via Wi-Fi.  I believe All my settings are correct.  Device is recognized and sync From iPad is possible.  Tablet is past warranty, so TechSup won't help.  Any suggestions?

    Thank you Meta, but I could not get the calendar and contact sync with Gmail to work. Apple support already suggested to use Google or a Windows PC. Maybe I should actually reset and try my old Windows PC. Seriously, ... can this be the solution after a Mac OS update for pure Apple users?

  • Device not recognizing once i open iTunes to upgrade iOS 6 in iPad

    My is device iPad. I need to upgrade my iPad to iOS 6. After installing iTunes 11.x after plugin my device is not recognizing once i open iTunes to upgrade iOS 6 in iPad.
    Please help me on this. I am doing this on Windows 7.

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
     Cheers, Tom

  • Airplay dosen't see my IOs devices

    My Apple TV airplay is not seeing my IOS devices when enabled.  I have 4th gen Ipad and Iphone 4S. No code provided.

    jsilverb
    It is your devices that should see the apple TV and stream to it.  The main thing on ATV is the computers icon to check you iTunes library is being found.
    You have not put your set up but for starters check that all are on same apple ID, network and Home Sharing is on.  If no luck reboot router and apple TV (take all cables out of ATV for 30 seconds) and see if that helps.  If not then post more about your set up and if ATV is working at all etc.
    Jules

  • My computer no longer recognizes my 7th Gen iPod Nano. "USB Device not recognized." What can I do to fix this?

    Hi!
    So here's what happened: My nano has been working just fine. I plugged it in this morning to my computer, and it automatically turned on, but instead of charging, it went to play music. I turned it off. However, it did not switch to charging mode. So I unplugged it, and then I plugged it back in. "USB Device not recognized." My iPod won't turn on anymore, and my computer simply does not recognize the nano.
    It may have gotten slightly damp yesterday as it rained a bit when I was walking home (though I kept it covered). When I got home, it proceeded to work for another two hours after that--then I turned it off. And this morning? It doesn't work, as described above.

    Try cleaning the connector on the bottom of the phone. Use a magnifying glass to see what is stuck inside, a dry toothbrush and/or wood or plastic toothpicks (nothing metal). If that doesn't resolve the problem your phone is broken.

  • Itouch - USB device not recognized and Itouch now no longer works

    I'm now on my 3rd Itouch since December all due to the same problem. All seemed to be going well with my 3rd replacement Itouch. Having loaded most of my cd collection into ITunes the night before I was going on holiday I synced my Itouch. Some sort of automatic download took place I think from Microsoft and suggested my drivers were being updated. Next thing I got message to restore my Itouch to factory settings. I did this and all the problems I had with my previou Itouch's started again.
    When I now plug my Itouch into my laptop it says "USB device not recognized" and the Itouch will not switch on. I've done everything including reinstalling Itunes, holding down the power and home key but to no avail. Looks like I'm going to have to send my Itouch back again. I have a suspicion that a Microsoft download is corrupting the drivers. If anyone can help I would be very grateful. I really like my Itouch but the fact it keeps failing leads me to wonder if I should opt for something else.

    I had success with the holding down the keys and connecting to usb and using itunes to restore firmware like they show here
    http://support.apple.com/kb/HT1808
    the showing the usb thingy on the screen part

  • Airplay no longer working on iTunes 11.1.3 Windows 8.1

    I have a PC connected by ethernet cable to a router, which is sending a wireless IPv4 signal to an airport express on my home network, which is in turn connected to some speakers. I also have an Apple TV connected to the same network. Airplay worked fine in the previous version of iTunes, but since 11.1.3 airplay no longer works properly.
    On a fresh reboot of the PC & opening iTunes, the airplay icon appears, and airplay works as normal. However, after an arbitrary amount of time (usually between 3-10 minutes) the airplay feature becomes unresponsive, and the only way to remedy it is a fresh reboot of the PC.
    However, I can play music from my iPhone through the Airport Express to the speakers, and I can mirror audio from my macbook through the AE to the speakers, but iTunes can't see anything with airplay (no speakers, no Apple TV) and the remote app on my iPhone iOS 7 can find the Apple TV, but can't find my shared library on the PC.  So it's not a proble with the AE, or with the router.
    Other PC users with a similar issue who are connecting to their router by WiFi have reported a that turning off IPv6 appears to be a usable workaround, but I can report that it does not work for me when connecting to the router by ethernet cable.
    Also, the Airport utility can see the AE after a fresh reboot, but again after a few minutes it can no longer see the AE.

    yes this is happening to me....
    Same scenarios..

  • I just got a new iPhone 5S and I want to sync it with my PC however, I already have my old iPohine synced on my computer. When I plug in my new iPhone into my computer, the device isnt recognized. How do I add my new Iphone to iTunes?

    I just want to sync music on my new iPhone but it isnt be recognized on iTunes. Please help.

    Hello there, kiliemccrary.
    The following Knowledge Base article provides some great, in-depth steps for troubleshooting your issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT1369 I updated itunes now my ipod or phone wont sync devices not recognized by itune. windows 8 sees the device  what changed?

    How do I get Itunes to recognize my devices? i5S and ipods have been synced to this pc prior to Friday's itunes update.
    if I uninstall and reinstall itunes will my backups and library be lost?

    Hi meccamark,
    If you are having issues with your iOS devices not being recognized by iTunes on your Windows machine, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • Device not recognized in iTunes for Windows

    iPhone 5S is not being recognized by iTunes or Windows Explorer.

    Hey there andrijfrommississauga,
    I have an article here for you that will help you troubleshoot this issue with iTunes not recognizing your iOS devices:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • TS1591 my classic iPod no longer appears in iTunes window when connected to iMac.  does this mean my device is no longer supported by iTunes? or incompatible with OSX?

    my classic iPod no longer appears in iTunes window when connected to iMac.  does this mean my device is no longer supported by iTunes? or incompatible with OSX?

    Hello stiannac
    Check out the article below for troubleshooting to get your iPod showing back up on your iMac
    iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/ts1410
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • IPod nano 3rd Gen 8G "Device Not Recognized" on 2 diffrent computers...

    I have the latest versions of iTunes on both a Windows XP service pack 3 computer and Windows 7 Laptop. I've tried multiple cords but both computers tell me "device not recognized", I've uninstalled and reinstalled all drivers. Done a reset and Disk Mode reset on my iPod. Haven't droped it or damaged it in anyway since i've connected it sucessfully to my computer last time. Will charge on a wall charger, car charger and dock. Tried connecting friends iTouch and it was registered by Both computers.
    And ideas on a fix other than the $100+ apple wants, I'll just got buy a new MP3.

    - Try another cable
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    and for the computer in queston
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • USB device not recognized ... any help ?

    Hey guys,
    So i went to plug my iPhone 3G into my PC running Windows Vista and it comes up with the error message,
    "USB Device Not Recognized
    One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."
    Last time this happened I uninstalled the USB Root Hubs on my computer and when they reinstalled my iPhone connected, but it has happened again and this method no longer works.
    I've tried restoring my phone, turning it on and off, i tried stopping my computer from turning off my USB ports but to no avail...its getting very frustrating because i can't sync my phone
    ANY suggestions would be great PLEASEEEE!
    Message was edited by: chris__robin

    Try a different port and a different USB cable.

Maybe you are looking for

  • Error 6 in write to spreadshee​t file

    Hello.  My program reads a 1D array of 12 values, then increments each value as the controlled components activate.  The program then writes the new value back to the file, replacing the old value.  After running for a time, I get the following error

  • Content conversion file picked up no output

    hi , i am trying a content conversion. the sender communication channel picked up the csv file after some eroors and correcting those errors. now i can't see the output xml file. i can't see any processed messages in sxmb_moni. when looked at all mon

  • New page when the fields changed

    Hi all, I wanna display my report on  next when my BEZEI_T gets changed. I used at-new command also .. but its not working.. and also i want that new bezei_t get stored in some variable and change the header of the report. Please guide me. My code is

  • Spelling doesn't work for abbreviations.

    When writing for example "Sept." the word is marked as a spelling mistake and in the suggestion you see just the same word with the dot because the spelling machine apparently doesn't register the dot.

  • Duplicate Artist Names

    When I scroll though the artist listing on my ipod a few of the artists are listed twice or three times....is there any way to get it so they are just on their once. They are spelled the same way and the songs are even from the same cd in some cases