AirPlay not working with Wi-Fi access point

Got home network, everithing worked fine including AirPlay. Decided to switch off radio on main router and place an access point to boost wi-fi signal. Model - Dlink DAP-1350. All works fine, much better coverage, BUT NO AirPlay. At all. Not a songle player is seen from wireless devices. Remove access point, turn back radio on main router - all works again.
Btw with access point on wired devices see all AirPlay speakers just fine, only wired are not working at all.
Any ideas where to look for a fix?

Correct, you will need a BlackBerry Data Plan from your carrier for the BlackBerry functions and features.
Some third party applications like Opera Mini will work, and as well, your Hotspot browser will work with the WiFi.
You must have the Data Plan, in order to get the RIM push email functions you are looking for, as well as addtional BlackBerry data services such as the internet browser, Facebook for BlackBerry, BlackBerry Messenger, and much more.
So, call your carrier and inquire about having the BlackBerry Data Plan added to your account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Can cisco MSE(mobility service engine) configured to work with non-cisco access points?

    I understand that access points can be configured to forwards all the probe requests to cisco wifi controller. cisco MSE(mobility service engine) gets the probes from wifi controller to find the location of the mobile devices.
    My question, can cisco MSE(mobility service engine) be configured to work with non-cisco access points?

    No and the reason why is the NMSP communication from the MSE to the WLC. Other vendors don't support this so there is no communication happening.
    -Scott

  • Appletv remote app and airplay not working with iphone 4S

    I have the latest appleTV.  I have the remote app loaded onto my ipad3 and iphone 4S.  The app is not working with iphone 4S, nor do I get the airplay icon, hence I can't mirrior my phone on appleTV.  It used to work.  I have deleted and reloaded the app, and still nothing.  It worked fined until a month ago or so.  I have enabled home sharing.
    The app and airlplay are working just fine with the ipad3.  I have the ipad and appleTV hooked up to my router using 5Ghz, and the iphone only connects to the 2Ghz network on the same router.  I don't think this is the issue, because it worked before.
    Also, when I click on the remote app on the iphone, to add an itunes library, a code pops up on the phone, which I enter into itunes on my Win7 PC.  Nothing seems happed on the computer when I enter the code.  Could this have anything to do with recent appleTV or itunes updates?  Any possible solutions?

    It seems like I am having the same problem.
    I have the latest AppleTV 1080, imac 27", ipad, ipad2, 2 iphone 4, all with the latest iOS. After I have the AppleTV connected, a few problems showed up:
    (1) ipad plus iphones cannot airplay photo to AppleTV. After the play button and the grey screen displayed "the playing msg on AppleTV", nothing happened. it is the same for ipad/iphone.
    (2) iMac not Airplay to AppleTV
    (3) Airplay Mirroring not working
    The following are done:
    - Home sharing enabled
    - To test the devices are connected. I set a passowrd for Airplay and the ipad/iphone both requested for it so they are network and devices are ok

  • HT1145 Why is iOS 5.1 AirPlay not working with Airport Express

    Ive updated my iPad and iphone to iOS 5.1 and now AirPlay is not working with my Airport Exress set up.
    Can anyone help me out? I can't seem to resolve this and I'm an apple head

    I have the same problem from my Ipad 2 and my Iphone 4S trying to airplay to my Apple TV 2. i dont get any airplay button when playing photos or \video.
    All worked fine with IOS 5.0
    Whats going on?

  • Airplay not working with non-apple router

    I use an airport express only for playing music in a remote location. It stopped working after I switched my main wireless router from a Time Capsule to a Linksys running Tomato USB firmware.
    The Express is set up as "join a wireless network" with the correct SSID and password. The light on the Express is green and the main router status page shows it is connected, but Airplay cannot see the Express from either iTunes on my macbook or my iPhone. Also I cannot see the device in Airport Utility. When I connect the Express to my computer with ethernet, Airport Utility can see it and so can iTunes.
    I have another Express hooked to the network via ethernet and everything works fine with that one.
    Surely Airplay should work with non-apple wireless routers. Any suggestions would be appreciated.
    thanks

    Factory reset the express, and try to make it join again...

  • Wireless bridging is not working in 1552 outdoor access point and 2602e indoor access point.

    Hi,
    I am have been tested  wireless bridging with 2 indoor Cisco 2602 access point by following the attached document and its working fine without any issue. 
    After then I made one Cisco 1552 EU-M-K9 outdoor access point as RAP, then connect to this RAP with one 2602 mesh access point. But its not working, mesh access point is just start scan the signal to get associate with RAP, but not getting established. Is there any specific configuration required to connect between outdoor and indoor access point. Kindly find the attachment and advise.
    regards,
    Jubair.S

    Hi  Team,
    Any suggestion??
    Regards,
    Jubair.S

  • Peer-to-Peer Airplay not working with iPad (Gen. 3)

    I'm in the process of testing "wireless projection" solutions. Since I have access to an iPad (gen. 3), iPad Retina, iPad Air and iPhone 5c all running iOS 8.0, with a pair of Apple TV's, Model 1469, one ATV a wired connection and one ATV no network connection at all.  Both devices were updated using Configurator to get the activation setup. 
    Once activate, they were then set up in their respective locations, and the settings were verified (i.e. airplay is on, networks are connected/disconnected as required) and tested using each of the iOS devices listed above.
    All 4 iOS devices could see the networked Apple TV as expected.  But the Gen 3 iPad was the only device that didn't pick up the Peer-to-peer Apple TV when testing the standalone unit.  I tried to reset the iPad, turned off and on the radios, but the device will not pick up the PTP ATV.
    Has anyone else had any luck getting a Gen 3 iPad to work with the Peer-to-Peer with out a network?
    According to the following KB, Use AirPlay to wirelessly stream content from your iPhone, iPad, or iPod touch, you should be able to use a 3rd gen iPad to peer to peer airplay.

    iPad 3rd generation doesn't support Peer-to-Peer Airplay. Apple quietly said it was for iOS devices introduced in LATE 2012. Like for Handoff; certain devices with the latest Wi-Fi specifications can get this feature. The iPad 3 was introduced in EARLY 2012. I tried, but it didn't work. Here is what I found in the Apple TV Section.
    AirPlay requires an Apple TV (2nd generation or later) with an iOS device running iOS 4.3 or later or a Mac with iTunes 10.2 or later. Some features require the latest software.
    Peer-to-peer AirPlay requires a Mac (2012 or later) with OS X Yosemite or an iOS device (late 2012 or later) with iOS 8; and an Apple TV (3rd generation rev A, model A1469 or later) with Apple TV software 7.0 or later.
    AirPlay Mirroring is available with iPhone 4s or later; iPad 2 or later; iPad mini; iPod touch (5th generation); and iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), MacBook Pro (Early 2011 or newer), and Mac Pro (Late 2013) with OS X Mountain Lion or later.
    Dual-screen capability is available with iPhone 4s or later, iPad 2 or later, iPad mini, and iPod touch (5th generation).

  • Airplay not working with an ASA in the middle

    Hi All
    This is my case: In the lab I could configure mDNS on my 5508 with the global multicast and igmp snooping disabled. Only I needed was Global mDNS multicast enabled (based on Cisco Guide) and it worked fine under the following scenarios:
    All the services connected wireless
    IPAD on subnet A and Apple TV on subnet B, no Firewall in the middle. Peer to Peer Blocking in the WLC was any DROP or DISABLED and it worked fine.
    BUT, when I moved into production environment, the only way that it works is by having both Apple Devices in the same subnet with the Peer to Peer bloking DISABLED. I have a firewall ASA in the middle so I do not know what should I check in the firewall to allow Airplay to work.
    However, there is something really weird. in the IPAD, I can see the AIRPLAY icon at the bottom of the screen, when I click on it, I can see MIRRORING button and I moved it to the right to activated it BUT nothing happens on the AppleTV connected to an screen. I mean, looks like the request for MIRRORING from the IPAD to the Apple TV device is not reaching the last one. A few seconds after activating MIRRORING in the IPAD looks like the request is dropped since that the mirroring is not active.
    Is there any particular multicast configuration required in the ASA including ports (like 5353 udp)?
    I have an open case with TAC but any ideas are welcomed.
    By the way, I am running v 7.6 in the WLC in order to implement mDNS (traffic between ssid's subnet managed by the WLC - Bonjour Gateway is not neccesary)
    thanks
    Abraham

    Hi David,
    Let me share with you my findings. Apple TV requires more than 5353 port opened. Please see the following link and include in your ASA those additional ports/range. I mean, 7000, 7100, 5000 (udp/tcp), etc etc.
    http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/apple-macbook-airplay-appletv-firewall-port-findings/td-p/55048
    After opening those ports, the service is working BUT with significant LATENCY/SLOWNESS which we are trying to solve.
    We took some packets captures on the ASA ingress/egress interfaces for both contexts (see pictures attached) and I could see many retransmissions and duplicated ACK so I tried something else that worked (see Apple TV Works attached file) BUT this is not the final solution we need so we are still working on this issue in order to check if there is something wrong with our routing/switching process in the 6500 LAN SW.
    I created static routes in the ASA contexts to communicate the IPAD to the APPLE TV (ports already opened in the ASA as indicated before) without traversing the Wireless 6500 SW (test performed on VLAN A and VLAN B) and it worked fine. However as I said, this is not the solution we want because the Wireless 6500 SW must manage inter-ASA-contexts traffic.
    In addition to that I attached another picture/diagram that shows when Apple TV service fails-latency (traffic crossing the Wireless 6500 SW for communication between ASA contexts).
    Important to say that I am NOT using MULTICAST or BROADCAST ENABLED in the WLC. I am based on mDNS as indicated in the Cisco Guide/Instructions for version 7.5 and above.
    Hope this helps.

  • IPhone will not sync with Cisco Wireless Access Point

    This is unbelievable, i just bought a $1000 phone and it wont sync with a Cisco AP. I can sync it with a DLINK? I there a specific list of Access Points it will connect to. If so thats complete bullsh*(. Also, is there going to be a firmware update soon to fix these problems. Can you tell that im a little upset. I just saying that if someone spends $1000 dollars on a phone it should be working pretty dam good. Anyway can someone offer any suggestions?
    Upset Iphone user.

    After spending time on the phone with a Apple support technician, he indicated that the Iphone has a compatibility problem with the wep key encryption that the Cisco appliance uses. I find this disturbing being that Cisco is the biggest in network gear. What's UP Apple? We need SP1 for the IPHONE!!!

  • Airplay not working with ipad3 but works with ipod touch 3rd gen works

    Just recieved my apple tv 3rd gen (refirbushed) got it connected to my wifi and check out a few things and was working just fine. Then I tried to use the airplay function on my ipad 3 and it started to connect then the circle spins and error message appears. After which it messes up the wifi and nothing can connect to it, not ATV, not ipad, not touch, or other 2 laptops until it is reset. Did this a couple of times same result. Finally tried different tv farther away from router, same result. Lastly I tried touch, airplay worked with multiple apps. Retried the ipad, everything broke same as before. Please Help.
    Last iOS on all.
    D-Link DIR-635 - nWireless capable
    MAC Address filtering on.
    Home Sharing on.

    Turn off the address filtering, and see what happens...
    Using AirPlay
    http://support.apple.com/kb/HT4437
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215

  • AirPlay not working with my home wifi, but is fine at work. Suggestions?

    I have a new AppleTV, fully updated with the latest updates. I also have an iPad, fully updated with the latest OS. I have done all of the required steps to login with my Apple ID, etc. Home sharing is on.
    But the ATV does not detect the iPad, and the iPad does not detect the ATV. When I play a video on iPad, the airplay logo does not even appear in the control bar. The ATV does, however, connect to the wifi no problem and download direct from itunes/netflix etc.
    To try it under different circumstances, I took the ATV and iPad to my office and set it up with an HDTV there. AirPlay worked flawlessly.
    This leads me to believe the problem must be the wifi. In terms of internet at home, I am using a Time Warner RoadRunner internet package with a Netgear N150 wireless router.
    Any suggestions?

    Not sure if this will resolve your problem but I had same problem. The airplay button would not show up on my iOS devices particularly my iPhone and I noticed the remote app was not working correctly also. For airplay and the remote app it wax a hit or miss the later being the most. The thing was my remote app usually never acted up before but than in remembered that I recently changed my router from an Apple Express to an Extreme. I had my Express set up in manual mode and I selected channel 11 manually. But when I set up the Airport Extreme I left the router in the default mode of "automatic". Upon changing the Extreme back to manual and selecting my own channel, everything has been great! So if most of you are like me and live in an Apple ecosystem and have Apple routers you may want to make sure the router is not set in automatic. I believe this to be what is causing problems.

  • Airplay not working with canon mx456

    i can not get my canon mx456 to connect to my ipad air i will work off my laptop but will not connect to the ipad can any one help or have any tips too get it working?
    thanks

    AirPrint?
    Have you tried the troubleshooting steps from the AirPrint Knowledgebase page:
    If you are unable to print, or if you see the message "No AirPrint Printers Found"
    Verify that the printer:
    Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
    Is connected to the same Wi-Fi network as the iOS device.
    Has the latest firmware version installed.
    Has paper with enough ink or toner installed.
    Is free of any errors displayed on the printer's control panel.
    If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.Notes:
    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    Some Wi-Fi AirPrint printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the AirPrint printer is connected to the Wi-Fi network before attempting to print.

  • WRT54G not working with cable internet access - request for help

    Good evening!
    At least that's the time when I write this.
    I have a PC running Vista 64-bit version. 
    Until yesterday, I was connected to the internet using my WRT54G and a cable modem. There was a power outage (or blackout) and I lost my internet connection. I was not home when this happened. I got home and found the circuit breaker off. Since then, I can not access the internet anymore when I use the router. 
    If I connect the computer to the cable model directly, I can access the internet without a problem (hence I'm able to post this). 
    If I connect the computer to port 1 in the router, and connect the cable modem to the internet port in the router, I am not able to connect to the internet. 
    I have already:
     - updated the firmware to the latest version (it was already installed)
     - reset the router pressing the "reset" button for 30 seconds, unplugging it, and reconnecting power still pressing the "reset" button for 30 seconds. 
     - power cycled the devices
     - tested 3 differnet patch cables that I know are good and they work
     - reset the modem via a soft-reset remote request sent from the cable operator
    None of these options have helped me restore my router's connection to the internet.
    I know the router is working because I can print using my wireless printer and I can see my shared drives in the other PC I have connected to it,  but none of them are able to connect to the internet!
    Does anyone have any additional ideas on how I can fix this, before I go out and buy a new router?
    Thanks in advance!
    Pablo

    As you have mentioned in your previous post, that you have resetted your router and you are still able to Print from your Wireless Printer, I Feel that your Router is not getting Resetted properly, whenever you reset your router your router goes to Factory default mode, and it will change the wireless network name to "linksys" and your Network will be unsecured. Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable.
    Once you reconnect the power to the Linksys router, On your computer Open IE and in the address bar type (http://192.168.1.1) and hit enter, when prompted for username and password, Leave the username blank and in password type "admin" and click Ok. Below the Setup tab you will find MTU, So change it to "Manual" and change the size from 1500 to 1365 and Click on Save Settings. Then Below the Setup Tab you will find the Sub tab "MAC address Clone" click on it and "Enable" and click on "Clone your PC's MAC" and click on Save Settings. Now you can Unplug the Power from Router and Unplug the Power for Modem. Wait for 30 seconds, and 1st connect the Power to your Modem and wait till all the lights goes Stable then you can connect the power to Linksys router and once all the lights are sold. On your computer Open IE and check if you are Online. 

  • AirPlay not working with new iTunes version

    After downloading the latest version of iTunes, I got this error message: "The AirPlay device 'Joe Smith's AirPort Express' cannot be found on your network. Please verify your network settings and AirPlay configuration or select another device from the menu at the bottom of the iTunes window." It was working just fine until I downloaded the latest version of iTunes. What do I need to get music back up and running?

    Here's a good AirPlay Mirroring -- Mountain Lion setup and troubleshooting writeup: http://support.apple.com/kb/HT5404

  • E1000 works behind E3500 as access point but not behind Airlink AR675W and ideas?

    In my own home just testing my E1000 works fine as an access point with an E3500 as primary router using Linksys
    method 1 (lan-lan connection) with E1000 IP reset to 192.168.1.2  and  DHCP off  and with
    method 2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.
    In my daughters building where I need it, I cannot get the E1000 to work as an access point.  The primary router is an Airlink AR675W with ip 192.168.0.1 (255.255.255.0) delivering addresses 100 to 150.
    When i try the E1000 in either method  I get no internet connection on devices connected hardwired or wirelessly to the E1000.  Before each setup I used the reset button and the factory defaults tab
    method1 (lan-lan) I set the E1000 to IP 192.168.0.2 to be different than the Airlink and DHCP off.
    method2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.
    Are there any ideas why I cannot connect to the internet in this way behind the Airlink primary router

    ok - i will read up on the airlink - it is a landlord situation but he will probably let me do a few things to it.
    Also I see the Airlink admin IP default is 192.168.2.1 and not 192.168.0.1 like I thought so that might make a difference.
    I don't know what flash DD-WRT means.  Its a 10 minute drive to the other house. The internet provider is SHAW cable and I do not know the modem but it is probably Motorola SB5100 or SB5102 wired modem.  The problem is it is a large house with concrete walls & floors & double pane windows so the wireless signal downstairs is weak.  ethernet cables are probably ok but I'll take some more with me.  The  ethernet jack downstairs definately works as I can connect a single PC to it.

Maybe you are looking for