Airplay only plays audio - video is black screen with subtitles
On my 5th generation IPOD Touch, after downloading a movie from Itunes, I only see audio. The video is all black, with subtitls only.
After many attemts to fix this - i.e. reboot Apple TV, Reboot TV, Reboot IPod touch, Reboot WIFI Router, I still saw this problem.
This is with IOS 7.01. Has anyone seen this problem? So annoying and frustrating!
I suspect you are out of luck based on this:
Can I play my rental on more than one device?
If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
Similar Messages
-
my iPhone fell in the pool, I tried the whole rice thing. & It seems to only turn on show the black screen with the apple & some white lettering on top of the apple. What else can I do to get my iPhone to work again?
Time to take it to Apple and pay for an out of warranty replacement.
Allan -
Saved Real Player Videos only play Audio, video won't display
I can watch videos on youtube, but all the videos i have snatched with realplayer won't play anything but the audio, i've restarted and redownloaded realplayer 11, so i'm lost.. .
i found a lot of people had the opposite problem, video no audio but i couldn't find anything for my situation
please
please help
i'm just and anime junky trying to watch my cowboy bebop series
thank youDo you have these installed?
Flip4Mac WMV Player from http://www.telestream.net/flip4mac-wmv/overview.htm (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs. -
Why is an mov file showing up as a black screen with only audio?
I am importing a mov file into elements 11 and it is only showing up as a black screen with audio. The clip will play in other programs on my computer but is not importing into elements 11. The file was created on my panisonic camera. I am pretty new to video editting and am quite frusterated. I'm assuming it is some sort of codec issue but don't know how to proceed. Thanks for any help.
'tRead Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/
IF your camera uses MJPEG read... MJPEG http://forums.adobe.com/thread/730396
>new to video editting
Some reading...
Online User Guide http://help.adobe.com/en_US/premiereelements/using/index.html
-Page to download current PDF http://helpx.adobe.com/premiere-elements.html
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086
Saving & Sharing http://forums.adobe.com/thread/1137128
-Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
-Sharing for Movies http://forums.adobe.com/thread/1051093
-Sharing for Computer http://forums.adobe.com/thread/1058237
Steve's Basic Training Tutorials... steps are the same for several versions
-start at http://forums.adobe.com/thread/537685
-v11 http://www.amazon.com/Muvipix-Guide-Premiere-Elements-version/dp/1479311200/
-All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/1451529724/
-and http://forums.adobe.com/thread/498626
-and http://prodesigntools.com/four-hours-free-video-tutorials-new-photoshop-elements-9-pse9.ht ml
-and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-premiere-elements-7-and- 8.html
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips
Another help site http://muvipix.com/ or http://muvipix.com/phpBB3/ -
Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor
Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor after I installed Mcafee Internet Security.
Hi I installed 1of 3 McAfee Internet Security protections on my HP laptop a few weeks ago with no issues. I Have a Dell XPS 420 desk top with Windows Vista operating
system, it’s never had any issues, until 2 nights ago I installed McAfee Internet Security (detected incompatible files and will remove) pc now only boots up to a black screen with a mouse cursor, it will show the windows logo and a hash symbol floating around
the screen. Now 2 weeks ago I installed the same program on my Dell all in one desk top with Windows 7, the same issue happen but that pc has no screen activity, I tried a back to factory reboot on this one, still black screen.Hi,
Please install the compatible version of McAfee Internet Security:
http://home.mcafee.com/store/internet-security
if you have startup issue, you can boot into Safe Mode to uninstall the problematic software to go back into Windows.
Alex Zhao
TechNet Community Support -
Black screen with no cursor after installing Windows 7 through Boot Camp on Retina MBP
Hey all.
So, I have a Retina Macbook Pro (15", late 2013). A couple weeks ago I tried to install Windows 7 on it through Boot Camp.
After some struggles with trying to repair my disk with Disk Utility and having to recover the system etc, I finally managed to actually install Windows 7. However, after the installing was ready, when Windows was supposed to boot, it just gave me a black screen with no cursor. I really had no idea what to do there, I tried to do some research from google but only found answers regarding a black screen with a cursor DURING the installation. However, I managed to launch Windows in safe mode. I deleted graphics drivers that bootcamp assistant had installed, and then it worked and I got to boot Windows succesfully.
However, as probably all of you know, you can't do much without those drivers. Games, videos, overall performance of the system is kinda horrible.
After that, I wiped the whole system, Mac and Windows, and reinstalled Mac. During the Windows installation I was running on Mavericks, now I've got Yosemite. I might try installing Windows again next week, does anyone have any clue why the black screen happened? What could I have done wrong? And the most important question in my mind, in case that happens, is there any way to install the graphics drivers manually from somewhere? After I uninstalled 'em earlier, I tried to find them manually, but couldn't find any.
Thanks!Yes, that's exactly what was the problem in the first place, I had a USB3 device. Switched to USB2 device and the installation progress started flawlessly.
The later part I didn't quite get. What are those installation methods, how could they cause the problem there? I had no problems during the installation, but after installation when launching Windows I had the black screen, and that I suppose was GPU drivers problem if I'm not totally wrong? I could hear the basic Windows system beeps etc when I tried clicking everywhere (had no cursor either, just clicking randomly), so the system was running there, but just didn't draw the picture at all. -
C655D 5210 tosiba black screen with mouse pointer
I have only had this computer for 8 months. One day I turned it on, and windows kept restarting. After a few trouble shooting steps off the internet, I decided to reinstall windows 7 and lose my data and start all over. The first time it could not repair the computer and asked me to send the information to microsoft. Cannot boot in safe mode, I can get to the setup utility screen. This is a new Windows 7 cd. After several tries, it installed and said it had to restart, (this may happen several times) it only restarted once, then a black screen with a cursor. When I try to boot from the cd, the windows logo apppears, then a black screen with mouse pointer again. Toshiba is no help at all. This is my third Toshiba laptop. The first one did the same thing. But it was out of warranty, the amount they wanted to charge us, i just got another one. My mom's Toshiba just died with no real reason, the old one is in the garbage, and this one is only 8 months old. Toshiba would like us to send the computer in, pay for shipping, wait for 3 weeks, pay to ship it back to us, with a promise that it may not work.
Please help
here is the error message when trying to install windows 7
file:\Boot\BCD
Statu" 0xc000000f
An error occured while attempting to read the boot configuration.Hi, last try is to install os manually, a clean os Install (way to go here)
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1 -
Ipod video classic 5th gen won't play video/podcasts or audio only a black screen with the play symbol and volume/progress bar. games work fine! any ideas?
Here's some more info.
I tried installing the latest iTunes to my housemate's PC, logging into iTMS with my account, authorizing his machine to play my content, restoring my iPod to the factory settings, downloading the videos and copying them to my iPod.
It worked fine, and I can play my videos.
I have done the exact SAME thing on my own home PC twice, after completely uninstalling and reinstalling iTunes, QuickTime, and the Apple Software Updater. But I still can't get any videos downloaded on my home PC to play on my iPods.
Any thoughts? -
My mac will only play audio and shows a black screen when I load video's from my I-phone and camera
I cannot play video's loaded from my I-Phone or Camera . I get a black screen with audio but no picture ??
I have tryed to locate a box to change my safari to 32 load rate and no such thing comes up in my info on safari.thanks a lot buddy
-
I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?
I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?
-
Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video? (Powerpoint Presentation 2013)
You asked your question on the wrong forum. Try one for the Flash Player
-
Hey Follow FCP users.
I'm importing a mini-dv tape thats in SP mode with 12bit audio and when I import into final cut, it gives me this error message:
"The audio sample rate of one or more of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your captured preset matches the sample rate of your tape"
And when I play the captured footage in final cut, it only gives me a Black screen with audio.
I tried changing the
My questions are this...
Why is this happening and how can I fix it?
Thanks in advance.http://discussions.apple.com/thread.jspa?threadID=1545615&tstart=0
Are you sure you had VIDEO checked for capture?
-DH -
Hi
Re Mac intel... Firefox updated to 3.6.14 and advised Flash 10 be installed. I did this and now on YouTube videos all I see is a black screen with no play or pause button. System is OS X10.4.11
Do I need to uninstall Firefox and re load an earlier version and an earlier version of Flash etc... will I lose my bookmarks and firebug? If so not worth it.
Would really appreciate help so sad not to be able to view any YouTube. Many thanks, ClareHi again - since writing the above I have posted on Adobe>Webplayer>Flash forum the following request and will post on here if I receive a reply that works:
Firefox updated to 3.6.14 and then advised Flash 10 be installed. I did this and now on YouTube videos all I see is a black screen with no play or pause button. System is OS X10.4.11 Have now followed Adobe instructions to Uninstall Flash player on system and then Install Flash 10. But still at YouTube Safari says Flash 10 is needed and in FF shows a black box only. I use Intego virus barrier but this has never blocked an update before. Flash is enabled in Firefox and Safari.
eldnolb at Adobe forum advised: Go to this site and right click on the Flash logo, Settings, Display Settings. UNcheck the hardware acceleration.
http://www.adobe.com/software/flash/about/
But when I go to this page no logo appeared for me to right click on, which again means that Flash player is not working... so I could not access Settings, Display Settings, Uncheck etc. Was advised to start a new Mac entitled thread. Clare -
AppleTV will only play audio, not video
My AppleTV will only play audio, not video via Airplay. I've verified correct settings, reset iPad, AppleTV and router with no success. Please help!
Welcome to the Apple Community.
What is it that you were playing, some providers block their content from AirPlay. -
Premiere Pro Only Playing audio when i press play. And it says "Media Offline" with a big red screen. What do i do?
And When i double click the video files in the editing program, another window pops up named: Source:Sequence 01. But the window Program:Sequence 01 Has a Red screen on it! But the file clearly works so i have no idea what to do.
Maybe you are looking for
-
Alot of people use my computer and I would like to make it to where you are required to have a password to delete the history. I tried public fox but you can simply delete the history by accessing "Show all history". So public fox doesn't work.
-
Upgrading Mac Mini in order to use iTunes
Okay, here is my issue..... Bought the wife an iPhone 4, tried to sync with an old iTunes version on her Mac Mini running OS 10.4.11. iTunes said we needed to download the latest version (v. 10.7) in order to work with the iPhone. Tried to download t
-
How to convert date object format to new?
Hi, I have data object and I want to convert it to this format. DD MMM YYYY eg: 23 MAR 2003 I am looking for exact line of code please. Thanks, Kavans.
-
Allow cell contents to cross page
Is it possible to allow text in a cell to run over more than 1 page? I have a table with 2 columns and 16 rows, which MUST fit in to 3 A4 pages; unfortunately, it is currently 5 pages long, as all cells are kept on a single page.
-
Photoshop CS3 slow to open files
I have looked at all the answers i can find so far on this and other forums, but have not yet been able to effect a solution, so please bear with me, and hopefully someone can assist further. The problem is that opening files is painfully slow - havi