Airplay Question (wasn't sure where to place it)

I know that it's only possible through the aid of third party software (such as Rogue Amoeba's Airfoil), but is there a reason that iOS devices and Macs (or even a PC running iTunes) are unable to receive Airplay data? For instance, if I have an iPod touch on a dock, it would be really nice to be able to pass airplay to it from my laptop. I'm looking specifically at audio, although being able to push your iOS display to a Mac would be really cool too.

Hi:
You will not void the warranty unless you install a card with power supply specs that exeed those of the power supply in your PC, or cause other damage by installing the card.
See the answer to Q17 at the link below.
http://h40059.www4.hp.com/warranty/information/faq.php#17
Now, since you plan on installing a video card on a PC that came with Windows 8, there are 2 BIOS settings you need to change before proceeding to install the card.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03653200&lc=en&jumpid=reg_r1002_us...

Similar Messages

Quick Warrantee Question. (wasn't sure where to post this)

I just got a Pavilion 500-123w for christmas. What I would like to know is if I can put in a dedicated GPU without voiding the warrantee. It only has IGP Intel HD 2500. Honestly only slightly worse than my dedicated but still worse nonetheless. So will it void my warrantee? I don't have any stickers on my case stating anything about opening the case. I'm used to seeing warrantee void stickers on there. Thanks in advance!
P.S. If its in the wrong area you can move it.

Hi:
You will not void the warranty unless you install a card with power supply specs that exeed those of the power supply in your PC, or cause other damage by installing the card.
See the answer to Q17 at the link below.
http://h40059.www4.hp.com/warranty/information/faq.php#17
Now, since you plan on installing a video card on a PC that came with Windows 8, there are 2 BIOS settings you need to change before proceeding to install the card.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03653200&lc=en&jumpid=reg_r1002_us...

Problems installing IWork Pro 9.0.3 Not sure where to place my question but I'm having problems installing iwork 9.0.3

Not sure where to place my question but I'm having problems installing iwork 9.0. My MacBook Pro doesn't read the disk and ejects after a minute. I just bought the mac and iwork. Any thoughts?

https://discussions.apple.com/community/iwork

Not sure where to place my SSD and HDD. Macbook Pro mid 2010, 2,4GHz intel core 2 duo.

I have a mid 2010 Macbook Pro 2.4 GHz Intel Core 2 Duo,
10gb of Ram...looking to max it at 16 even though apple says 8gb.
I upgraded to a Travelstar 1tb HDD 7200rpm max 6gb/s and waiting for my data doubler from OWC.
I am also hoping to buy an SSD. But Where should I place the HDD and SSD?
I read a forum saying that since my MBP is 2010, my HDD should stay in the main bay, and the SSD in the optical drive due to gb/s or somthing?
Can anyone clarify?
I thought SSD would be better in the main bay and HDD in the optical.
I am thinking of getting the Samsung pro SSD 120gb? or the 228gb?
Thank you

For best performance place the "system disk" in the internal slot and the second disk in the optical bay. I assume your SSD will be your system disk.

ICal upgrade? (Wasn't sure where to post this)

I'm looking for a calendar or planner program for my Mac (10.4.11). I want it to be able to organize files, keeps lists, and work as a calendar (It would be great if I could associate files with days on the calendar and with a task list). Does anyone know of a program or upgrade to iCal that works like this?

BusyCal seems to be a reasonable option. I may be going to that because I do not like anything I'm hearing about the changes to syncing across MobileMe calendars.

This is less a question and more of a suggestion and I am not sure where to put it..... I would like an update that would allow you to have a tone for each individual email account

I am not sure where to put this but I would like individual tones for all my email accounts

Wonderful suggestion.
You can give Apple feedback here > http://www.apple.com/feedback/
Hop that helps

I have a complaint about my mac book pro being slippery. Why do these expensive computers that we as consumers purchase if you set them on a couch slip off no matter where you place them on the couch?

Hi, my Mac Book Pro 15 inch lap top if i set it on the couch no matter where I place it slips off and luckily so far I have caught it before it falls onto the floor and gets ruined, of which I am super afraid of, due to what I initially paid for it as the consumer. Also, the couch is not made of slippery material at all. Also, when using it on my lap while watching tv, and multi tasking while doing my college homework, it even slides off of my lap at times. Why is it called a lap top then when it's not working as one? Are we to wear rubber pants that grip your products? Also, Why do you place on your Apple website that in one area a satin cover is available in the teal color, and then in another area it's discontinued? I believe it would be simpler if Apple would just remove the product all together from the purchasing website once any product becomes discontinued. Also, I was sitting here at home waiting for a reply about the satin cover in teal no longer being available period or that it has shipped, but yet I ended up calling Apple altogether myself and finding this all out that the only available color is the black. It would've been nice to have recieved an e-mail or a phone call on why it wasn't going to be shipped, or shipping instead of having to do customer services job and doing the leg work myself. Also, why is it that no one also even tells a consumer about the classes that were offered to a new consumer for 14 days after purchase of paying the $99.00s to learn about their macs of any kind? If I had known about such a program, I surely would've signed right up for it. Now I am being told that I can only take one clas at a time or something?!? I seriously wish I was told about this as a consumer of the Mac Book Pro 15 inch, because I would've purchased that offer right away, and now I am stuck and can no longer do it. Also I have had my computer since October of last year. So, I am in college as becoming a graphic designer within a degree of an Associates of Science and am now still struggling to learn the computer, and the programs I pruchased as well at the time of purchase, along with an Epson printer, the magic mouse, and the one year warranty. As for this all, I do believe that Apple needs to make a better bottom to the Mac Book Pro's within a much better quality for the price we pay as consumers, and all other lap tops and/or Notebooks in making them slide proof. The tiny rubber spots on the bottom of the lap tops or any Apple computer similar to mine just needs a better quality improvement to us consumers I spent good money on this purchase, I think now I deserve a rubberised protective cover for free for the slipperyness, and also since I was never told about the program for the classes of which a consumer was to pay $99.00s for, I think as a good paying quality consumer for Apple's products, I now deserve these classes for free as well.
Sincerely,
Kim

Hi shldr2thewheel,
it has been a while since we have last spoke, I would like to let you know, I am still working on getting used to the switch from windows to a Mac/Apple system. I do have a new question for you, I did purchase In Design CS5.5 through journeyed.com through Cuyahoga Community College of which I attend as a student, is there a way to purchase an online book through iTunes to learn that as well? Also, you know me, the struggling student, I would also, when and if the book can be purchased through the iTunes, would need to know if you do know of a much easier book for struggling students like myself and at a reasonable price as well for the In Design CS5.5 program. Our campus bookstore had closed early, and, so did the colleges library and our local library here where I do live, so, I cannot go to either place to purchase a book or to take out a book, plus cash funds are low at this moment as well but, I do have money left on the iTunes account to use, if it can be used. So, can it be used, the iTunes money, towards finding a low priced online book? I am in great need of assistance as I have a project due for my one course for this Tuesday, September 4, 2012.
Sincerely in need of help once again,
Kim

I am trying to get my vi to trigger, not sure where to add the trigger

I need a vi that can trigger using an analog rising edge (1V), then produces a square wave (any square wave will do for now), and then show the measurement of the waveform. Attached is the code that I have made so far. Not sure how to get a trigger attached, or where to place the trigger, onto what I have done so far. Another question is where to have it triggered from, do I need to add another generate waveform to produce the trigger signal?
Any help is appreciated!!
-ncm
Solved!
Go to Solution.
Attachments:
Generate and Read Waveform.vi ‏39 KB

Hi,
You can place a DAQmx start trigger VI in the code at the top, between the DAQmx Timing and DAQmx write VIs, and then set the trigger type to "Analog Edge" and specify the channel to trigger from (in this case I think you would use the APFI line on your card). Check out the 'Voltage - Continuous Output' Example' if you need help implementing this in code, that example covers analog output with different types of triggering in a setup similar to yours.
Matt Lee
National Instruments
Applications Engineer

HT4623 i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

External hard drive, sharing, itunes? Not sure where to post this?

sorry guys but i'm not sure where this belongs, but anyway. I just bought my macbook and purchased a Western Digital harddrive ( external ) anyway I have like 80gigs of pics and music and want to get it from my iPod back onto the computer. Not a problem............My problem is that I can't put it directly onto the external drive I first need to put it on the macbook then transfer it to the externak hardrive. When I do this is winds up on my mac HD and also on my external hardrive. I only want it in one place. Ok, my ultimate goal right now is to buy an iMac which I'm doing this weekend. Got rid of my PC's ( Go Apple !) LOL. I want to put all my music ,videos,pics, movies on the external hardrive and be able to share it with both my Macbook and my imac. I simply want to be able to access my everything from both pc's but get it all from the EHD. Right now it's all on my macbook and I want to free up the space, plus learn how to do it for the future. Sorry to ramble. So far I've posted a few times and someone always comes through. Everyone here is awesome, it's like another planet compared to the PC world.
thanks
Mike , NYC
macbook Mac OS X (10.4.9) HP Desktop

Put your iTunes folder on the eternal hard drive, and make a alias to it from your home directory on the MacBook (Cmd-L). Do the same when you get the iMac.
I didn't quite get how the two computers are sharing the hard drive, or maybe you'll put the hard drive on the iMac and share the library. There's a lot of ways to make this work. You made a good decision.

I bought my MacBook Pro in 2010. This is the first Mac I have owned and recently it is having some difficulty loading we pages, often timing out. This Mac environment is entirely different for me and I am not sure where to begin troubleshooting/clean-up.

I bought my MacBook Pro in 2010. This is the first Mac I have owned and recently it is having some difficulty loading we pages, often timing out. This Mac environment is entirely different for me and I am not sure where to begin troubleshooting and/ or clean-up. I have moderate computer skills and try not to download or access questionable material, however recently I visited the Ap Store and purchased a couple of different aps to use in record keeping and for making a flyer. I am not even sure how to remove these programs to see if it helps.
Any tips or tricks are appreciated.
Thank you!

Time to see about the PRAM battery.
By the way iOS and OS X are different systems.
iOS is the operating system for iPads, iPhones, and iPod touch.
Mac OS X is the operating system for Mac labelled computers.

How do I get an image to stay where I place it without pinning it?

Whenever I place my logo in the top left corner it winds up in the middle. Not sure why this is doing this but I can correct this error if I pin it. Then it stays exactly where I place it, but then it does not scrolll with the rest of the page, because it is pinned. Thank you!

Hi Russ,
Ideally, Image should stay where you placed it. Please send your .muse file to [email protected], add this forum link and refer it to me.
Regards,
Aish

Marking green screen video to know where to place background images

My students want to create short green screen movies using a number of background photos that will change as they talk about their topic. How can they mark their green screen video so they will know where to place each photo? We are using iMovie 11. Thanks

If that's the case. You don't need green screen at all.
You can shoot the students framed in such a way as to allow room for the photos and then use Picture in Picture.
Here's a how-to from the MacMost site. It's for iMovie '09 but is essentially the same for iMovie '11.
http://macmost.com/imovie-picture-in-picture.html
Post back if you have further questions.
Matt

Where to place the third party jars on WLS 7.0SP2

Our application use the thirdparty JDBC driver, for example, the JDBC driver for
mySQL. I donot want my customer to modify startWeblogic.cmd or some file else
to make the jar file available for the applicaiton.
my question is if some directory exists under weblogic700/server where I can place
the jar file(that is, like the installed extension of JDK or JRE).
I try to place the jar file on server/ext, it does not work.
Guofeng

"Guofeng Zhang" <[email protected]> wrote in message
news:[email protected]...
>
Our application use the thirdparty JDBC driver, for example, the JDBCdriver for
mySQL. I donot want my customer to modify startWeblogic.cmd or some fileelse
to make the jar file available for the applicaiton.
my question is if some directory exists under weblogic700/server where Ican place
the jar file(that is, like the installed extension of JDK or JRE).
I try to place the jar file on server/ext, it does not work.
GuofengDisclaimer: I am a newcomer to the world of BEA WLS,
so try this at your own risk.
For the 3rd party classes to be found, they have to be included somewhere
in the CLASSPATH. The best place (IMO) for customisation of the CLASSPATH
is in the extEnv.sh. You will not find it in a standard installation of
WLS, but if you look in $WL_HOME/server/bin/startWLS.sh you will see this:
PATH=".${PATHSEP}${WL_HOME}/server/bin${PATHSEP}${JAVA_HOME}/jre/bin${PATHSE
P}${JAVA_HOME}/bin${PATHSEP}${PATH}"
# Import extended environment
if [ -f extEnv.sh ]; then
. extEnv.sh
fi
Note the inclusion of "." at the start of PATH. This is magic that enables
the ". extEnv.sh" command to locate the "extEnv.sh" script.
In "extEnv.sh" you can use the EXT_PRE_CLASSPATH, EXT_POST_CLASSPATH,
EXT_PRE_PATH, EXT_POST_PATH and LD_LIBRARY_PATH to add additional classes
and directories to the server environment.
For additional information, refer to the WebLogic Server Administration
Guide (http://e-docs.bea.com/wls/docs70/adminguide/startstop.html).
Similar, if you look in $WL_HOME/server/bin/setWLSEnv.sh you will see this:
PATH="${WL_HOME}/server/bin${PATHSEP}${JAVA_HOME}/jre/bin${PATHSEP}${JAVA_HO
ME}/bin${PATHSEP}${PATH}"
export PATH
# Import extended environment
if [ -f extEnv.sh ]; then
. extEnv.sh
fi
Note the missing "." in the PATH. This effectively means that even if
the "extEnv.sh" script exists in the current directory, then ". extEnv.sh"
command will only look along the PATH for the "extEnv.sh" script! To me,
that looks like an error (probably caused by a DOS-programmer used to
the default behavior in DOS to always look in the current directory
regardless of the setting PATH), so as part of my localised installation
procedure, I replace the offending part of setWLSEnv.sh with:
# Import extended environment
if [ -f extEnv.sh ]; then
. ./extEnv.sh
fi
which forces the "." command to read the "extEnv.sh" file in the current
directory, regardless of the setting of the PATH variable. I have
notified BEA of this, but their responses is that it is per design!
Regards,
Jan Bruun Andersen

Wanted to use Icloud to back up pictures and Itunes - it is running os 10.6.4. I have an original IPAD, nothing syncs without connecting. Do I need to purchase operating system updates? Wasn't sure what 10.6 Leopard is?

wanted to use Icloud to back up pictures and Itunes - it is running os 10.6.4. I have an original IPAD, nothing syncs without connecting. Do I need to purchase operating system updates? Wasn't sure what 10.6 Leopard is?

Snow Leopard, Mac OS X 10.6, is not iCloud compatible. You need to upgrade to Lion, Mac OS X 10.7, via a download from the app store...$29 (US), provided you had at least 10.6.6. You can upgrade to 10.6.8 for free as part of the software updated function, then go to the app store and purchase the Lion download.
When you do that, before installing Lion, make a copy of the Lion Installer from the Applications folder where it downloads to some other location, such as your Documents folder, so you have a backup copy.
For Lion you must have at least an Intel Core 2 Duo, i3, i5, i7, or Xenon processor, 2 GB memory though 4 GB is better and 7 GB free space on the hard drive.
As part of 10.7.2 you end up with the iCloud connection.

Airplay Question (wasn't sure where to place it)

Similar Messages

Maybe you are looking for