Airplay speakers skipping

I have a couple of AR Connect wireless speakers. When I have 3 speakers running on airplay, they cut in and out. Any thoughts?

Just audio from music, it seems.

Similar Messages

  • AirPlay Speakers audio syncing and other issues.

    For awhile I have been having a lot of issues with AirPlay Speakers (that is, sending the audio from my Apple TV to my AirPort Express while syncing the video). These include:
    Almost any app can have the audio go out of sync with the video. This usually can be fixed by pausing and playing again.
    WatchABC Live repeating commercials and not going back to the show. (ABC 7 WABC NY on Optimum)
    Certainly not the worst issue to have, but Hulu Plus will skip most commercials.
    And now, Showtime Anytime is guaranteed to have the audio go out of sync for both live and on demand shows and it will not go back to normal unless I switch to my TVs speakers.
    These issues have occurred since I had a 2nd gen Apple TV, and now I have a 3rd gen (Rev. A) with Apple TV version 6.2. The AirPort Express (802.11n 2nd gen) is right next to the Apple TV and connected to my AirPort Extreme via Ethernet, extending the network. I have tried connecting via Ethernet and it only seemed to lessen the issues slightly.

    Chris,
    I also own a T400 and had huge issues with skipping audio. Try the following:
    1) Uninstall Intel Storage Manager and let Vista use the default driver for disc controller (I presume yours is by default in AHCI mode just as mine was).
    2) Then go to Control Panel -> Sound, select Conexant High Definition SmartAudio 221 and after clicking on Options, select Disable all enhancements under Enhancements tab (this is a time-proven trick I learned while using a Dell at work).
    Pls let me know it this works for you.
    -Tom-

  • HT5517 How can I adjust sound level when streaming radio from my Apple TV through Airplay speakers?

    I have a 2nd Gen Apple TV with an airport express set up as airplay speakers.  I can stream the new radio through using the Airplay speakers pretty well.  The problem is that once I've got it going, I cannot adjust the sound level without laboriously backing out of the radio menu, going back to the top level menu then drilling down into the Airplay settings to raise or lower the speaker's sound level.
    Is there an easier way to do this?

    go to system preferences > Sound > Output. then change the output from "built-in" to HDMI.
    Maher

  • Is ther a way to send music to multiple airplay speakers on my ipad without having to use itunes

    Hello all, l have a question that relates to air play and my ipad 4.
    ls there a way to send music to multiple airplay speakers with my ipad 4 without having to use itunes as the master controller on my other PC. l know it is possible with itunes, but surely the ipad should be able to play to more than one airplay device at a time, we are living in the year 2013.
    Is there an alternative and if there is not, could someone please explain or point me in the wright direction why it is so!
    Thank you all in advance for your comments

    Yes there is and I'll be happy to email you how. [email protected] is my address.

  • When using apple remote app on ipad or iphone to control apple TV is there a way of selecting different airplay speakers?

    When using apple remote on ipdad or iphone to control apple TV is there a way to select different airplay speakers without having to control the menu on screen. Eg I want to listed to my music through apple tv (which is in the living room)  and beam it to my airplay speakers in my bedroom, at the moment I would have to go back into the living room to see my tv screen to select the bedroom airplay speakers, then go back upstairs to listen to the music. YOu should be able to select the speakers in app without looking at the TV screen. Hopefully that makes sense!?!

    Look at this.
    Tango Remote Control for iOS6-7 on the App Store on iTunes

  • Which is better for outdoor music bluetooth or airplay speakers?

    which is better for outdoor music listening airplay speakers or bluetooth, cost, etc.? 

    The MacBook Pro has higher specifications, depending
    on the model, and then CTO additional upgrades.
    The Air does not have a Retina display, but has lesser
    specs, so that may make a difference. They still offer a
    low-end MB/Pro w/ optical drive, w/o Retina; specs vary;
    it may work in your instance. You'd have 14 days to take
    a new Apple computer back, so keep that in mind.
    Good luck!

  • Can i play different songs to different airplay speakers at the same time ?

    Can i play different songs to different airplay speakers at the same time ?
    I know you can select the different speakers to play the music to, but wondered if you can also push different music to different speakers at the same time ?
    If not is there a way around this other than going for something like Sonos ?

    I found another solution in this thread http://forums.macrumors.com/showthread.php?t=695360
    Again you need the rogueamoeba guys.

  • AirPlay Speakers drop off iTunes list - help!

    My 4 AirPlay speakers (Bose, JBL, iHome) have worked fine connected by wi-fi to my Netgear WNDR4000 router. I play from iTunes, and also sometimes stream radio directly from my iPhone or iPad.
    I have had some issues with poor wi-fi coverage, so yesterday I up graded to a high end Wireless Access Point, the EnGenius EAP-1750h. This is a 802.1ac dual band high power device - the signal strength is amazing. I have turned off wi-fi on my router completely, and am using the access point for wi-fi connections.
    The issue I am having is that the AIrPlay devices are falling off iTunes after a variable time (minutes to hours). If I click on them in the iTunes airplay list, they disappear and I cannot connect to them. At the same time, the "connected devices"  lists of the access point and the router show that the speakers are still connected. There is NO issue with internet access on any devices. REBOOTING THE ACCESS POINT BRINGS THE DEVICES BACK, until they drop off again.
    I am thinking that perhaps there is a bonjour port that keeps track of the devices that is not making it from the WAP to the router or something - and Apple in its wisdom makes it really hard to find out such info. I am an experienced user, and do not have any gross mistakes in my device configuration; I have read the relevant Apple support documents. I am not an IT tech, however, and I am not familiar with some the advanced settings, particularly of the WAP, which is a high-end business-oriented device.
    All the AirPlay devices are connected on the 2.4Ghz network. The base PC is hardwired by Ethernet to the router. Turning off the 5Ghz band completely and using only a single 2.4Ghz network does not help. All software and firmware of all devices is up to date.
    Does this ring any bell to anyone? I sthere a setting that will fix this?  I love the WAP, but I will have to bring it back if I can't get AirPlay to work! I'm sure it is not a hardware defect issue - it is an Apple AirPlay configuration issue - that's why I am posting here. Help appreciated!!

    Recreating the speakers didn't work for me. I am not sure what the issue could be at this point. Any help would be apreaciated.

  • When trying to connect to Airplay speakers I get error message "The  network connection timed out" although some sort of connection is made as the speaker is turned on.  Same thing with Apple TV.  Is the distance from my speaker/ TV the problem?

    When trying to connect from iTunes to Airplay speakers I get error message “The  network connection timed out” although some sort of connection is made as the speaker is turned on.  Same thing with Apple TV.  Is the distance between my PC and the speaker or the AppleTV the problem?

    Hi whitwick,
    If you are having issues with your network connection when attempting to use AirPlay, you may want to use the steps in this article to troubleshoot -
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS5209
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • AppleTV to both HDMI and AirPlay speakers simultaneously

    I have an AppleTV connected to home theater receiver via HDMI. I want to add wireless airplay speakers so I can send audio to them as we'll as through the stereo simultaneously. Will this work?
    Steve

    vazandrew wrote:
    That is for controlling through iTunes. You can't output to multiple speakers from Apple TV
    That was my understanding too.

  • Which Airplay speakers are reliable?

    I have two Bose SoundLink Air speakers. Often AirPlay can connect, sometimes not. And when not, it's the same for iTunes and for iOS: a long wait and then nothing.
    I also have a Denon AVR-X4000. Same story. Chance of successful connection is about 4 in 5.
    The only thing to get AirPlay going again is to power cycle all devices - which is a pain because it involves removing and replacing the batteries from the SoundLinks. I really would like to just play music without needing to fiddle with the system.
    Questions:
    Are some AirPlay speakers more reliable than others? If so, which speakers might work better?
    Could it be that the problem is not with the devices, but with my configuration? How to fix? (Time Capsule with WPA2 Personal security. Already tried fixed IP addresses)
    Once AirPlay fails to connect to a device, is there anything I can do to get things going again that is quicker than a full power cycle of every device?
    I'm considering switching to Sonos - can anyone tell me if Sonos plays 100% of the time?
    -Ron.

    all speakers including other brands that has a Line-In will work with the player for audio....

  • Bluetooth versus airplay speakers

    Hi,
    I have an hifi that supports airplay and it is absolutely brilliant. Now I'm looking for something smaller for my bedroom. Basically all I need are speakers because my ipad deals with the rest.
    But I can't find airplay speakers. All that seem to exist are bluetooth speakers or proprietary stuff where I have to download something to my iPad (which I don't want).
    Are bluetooth speakers as easy to use? Is there any disadvantage compared to airplay?
    Thanks.

    For Airplay I use my Airport Express with Airtunes. I have pluged into the 1/8 speker jack on the Airport Express that runs to my music amp (stereo) and my speaker wires run outside to some outdoor speakers. Works great.

  • Cannot select airplay speakers

    I am trying to select a different AirPlay speaker in iTunes. When I click on the small icon in the right hand bottom corner of the iTunes window all my different AirPlay speakers do show. When I click on on of htem nothing happens and the "Computer" speaker stays selected. When I click on multiple speakers the window with the speaker selection shows and I can click on all the speakers but the click does not "stick". The Compute speaker stays as the selected speaker.
    When I do the same thing from a different Mac it works nicely as expected. It is just my desktop - where I happen to have my whole library stored - where it does not work anymore. It has worked before and I do not know what happened.
    Please help to restore this important feature.

    I couldn't get mine to work so I went into Itunes Edit/preferences in "general" checked the items I wanted playing back ie films etc then in "sharing" I checked the music box and also clicked share selected libraries instead of entire library and also changed the preferred video version to 720p (it was set on 1080p), then in "store" I clicked download at 720p as mine is the 2G apple tv which operates at 720p (the latest is 1080p).  Then it all started to work so I don't know really what I did but it's now fine.  Best of luck

  • Can ATV2 serve as source for Airplay speakers?  I'd like to send non-ITunes streaming (e.g. Netflix movies) to Airplay wireless speakers.

    Can ATV2 serve as source for Airplay speakers?  I'd like to send non-iTunes streaming (e.g. Netflix movies) directly from ATV2 to Airplay wireless speakers.

    Welcome to the Apple Community.
    No that's not currently possible sorry.

  • Watching iTunes Movie on Apple TV while streaming sound to multiple AirPlay speakers

    Hi Everyone,
    I bought a pair of Airplay speakers and Apple TV 3rd generation to watch my Movies in the iTunes library. Importantly, I want to listen to the movies sound on multiple Airplay speakers while watching. So far I couldn't activate the speakers, once I started the movie.
    Has anyone an idea, how to do that?

    Thanks a lot for your answer.
    I'm doing signal processing and work with videos professionally. The audio signal is technically always separated (and extractable) from the video frames. I don't see why  the audio shouldn't be possible to be distributed to different airplay clients?
    Do you mean that this option is just not supported by apple? In this case, do you know if it is at least possible to stream to multiple apple TV's at the same time?

Maybe you are looking for

  • Which is best remote software to access Windows 2008 Server from Mac Air

    Hi Is anyone using, succesfully, remote software to log into a Windows Server 2008 network from a Mac. I use Wyse Pocket Cloud Pro on my iPhone but there doesn't seem to be an app for a Mac Air. Any suggestions or help appreciated?

  • H323 cisco attributes not being forwarded to Radius accounting server

    I have enabled a Radius server to gather AAA Accounting CDR records but I don't see any of the Cisco h323 attributes. The following is an example of the list I WANT to see. ATTRIBUTE h323-remote-address 23 string Cisco ATTRIBUTE h323-conf-id 24 strin

  • Regarding ALV Reporting in ABAP

    Hi All, I have some clarifications related to <b>ALV Reporting</b> in ABAP. <b>Actually i have to create ALV report with Structure Length/Each record length is around 300 characters.</b> Is it possible to create a ALV Report with <b>300</b> length fo

  • CSV Conversion Considering Edge Cases

    We currently have a problem converting an internal ABAP table into a CSV file. Example: UserID;Name;Pet1;Pet2 D012345       Klaus Meier     Dog;Bruno      Cat"Kitty should become D012345;"Klaus Meier";"Dog;Bruno";"Cat ""Kitty" (<- content delimiter,

  • ClassCastException while creating sendstream

    Hi, I'm trying to establish an unicast rtp session and play an url to the remote client. DataSource[] sources = new DataSource[urls.length];           for(int i = 0; i < urls.length; i++) {                sources[i] = Manager.createDataSource(urls);