Airplay STOPS after printing on G Express

I just installed a Samsung ML-2010 to a G based Airport Express in WDS bridge mode. For some reason, the native ML-2010 print drivers do not work, but the ML-1630 driver does work. If I am playing audio through the Airport Express and decide to print, once the print data reaches the express, the audio stops and does not return until I either power cycle the Express or go into Airport Utility and disable Airplay, wait for a reboot, then re enable Airplay, and wait another reboot. If I print from a Windows PC using the ML-1630 driver through Bonjour, the audio does NOT stop when printing, only on the Mac (iBook G4 10.5.8) is it failing. I tried 2 Airport Express units and both fail the same.
I can only think it is the Mac print driver, but wanted to see if anyone else had a similar experience.
Thanks in advance

Hi dmule, I just replied to another topic here about this, I know you were involved in it but just in case you don't get notified I thought I should cross-link it here.
Cheers
Ollie

Similar Messages

Airplay stops after 2 seconds (denon RCD-N7)

When I start playing music from iTunes using Airplay and a Denon RCD-N7 receiver the sound stops after just 2 seconds, iTunes contimues playing on the computer screen. I use windows 7, and the latest iTunes.

Scott, I have the exact same problem. This only started with the last Apple TV update for me. My platform is Mountain Lion (10.8.2) and have the latest itunes installed also (11.0.1).
I'm still currently trialling this issue as it has only just happened. As you said the music stops at 13 seconds, however movies are unaffected.
I'm yet to try other devices (iPad and iPhone 5) but will keep you posted.
I solved this issue briefly by resetting the Apple TV but it started again not long after.
Very annoying !!

Stops after printing first page and does print graphics, etc. on page

I am using WIN 7 64 bit, and until I got a new computer with this on it, my Photosmart 5580 worked fine. I bought the CD with the correct driver and software for WIN 7 from HP. However, when printing a web page, it leaves blank wherever a graph etc. should be and only prints the first page. I know somewhere there is a setting to print background, and maybe that got unchecked in putting in the new driver. I can't seem to find where to set that. I do not believe that would have anything to do with only printing one page when I have selected ALL. Thanks for any help anyone can give me.
MLJ

Hello there, Welcome to the Forums! I hope you enjoy your experience
I noticed your posts about the Alignment Failing on your Photosmart C4480 and would like to offer my suggestion. I understand you have done some troubleshooting already however, please check out the guide below and try any steps that you haven't yet attempted. It's worth a shot right? If the issue continues, I would then suggest calling HP to see if they have any replacement or trade in options for you. All of the info you will need is below!
An 'Alignment Failed' Error Message Displays on the Control Panel
If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
I hope my post was informational, thanks for posting in the community!
Have a great Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printer freezing after printing label - C#, PM43

Hi, I'm building an application which runs on PM43, uses LCD and keypad for interaction.the application should run in a loop, like ask for the input, print the label, then go back to the main screen where it asks for input. After it takes the input, and prints the label, the printer or application kind of sleeps unless we press some button on the printer, and then it goes back to the main screen. otherwise it would stop on the "Printing..." which I show before calling the Print function. another point I noted is that application would go back to main screen if the print function is not called, for example if the entered part number is not found in SQLite DB, then it shows "Item not found" and goes back to main screen. but if the print function is called, then it is stuck after printing and we have to press enter or some other button to take it back to main screen. so, it looks like to be a problem between Printing and Canvas. I'm uploading a sample project. there is a far loop, in each iteration, it should print a label, show the "Completed Printing" message for couple of seconds and then go back to main screen for a couple of seconds, and then start the next iteration.but this also seems to be stopping after printing unless we wake the printer by pressing some button. please guide.thanks Regards,Zeeshan

I'm not sure if this was ever fully resolved this, or if the user will even check this response, but in case it helps someone else I'm answering. I believe the problem with the code you provided is in the attempt at multithreading. In the main function you created a new thread using the PrintingThreadFunction, and started it immediately. This function alters the canvas (which I believe should only ever be directly changed from your programs main thread) It also attempts to do this before the Canvas loop is even started using run in the main (previous) thread. Quick Quote from the Smart Printing Resource Kit Developer Guide:
"The UI functionalities provided through the C# API are single-threaded. You shouldonly enter the UI main-loop from the main thread, and you should only modify UIobjects from the main thread." (pg. 22)
I highly recommend using delegates to handle the multithreading, and to only modify the canvas from the main thread. I am also guessing your timer event which partially resolved your issue lives in the main thread as well.

AirPlay on express stops after a few hours

I have noticed lately that when I am streaming music to the speakers that are connected to my express that the music suddenly stops after a few hours. It's done this a few times now, and every time I have to unplug it to reset it and it works again. Is there a setting I missed out on when I set up the express? Or is it a setting in iTunes that meters how long music can be streamed?

Hi dmule, I just replied to another topic here about this, I know you were involved in it but just in case you don't get notified I thought I should cross-link it here.
Cheers
Ollie

Print Queue "Stopped" after restarting...

I'm having problems with a Print Queue that keeps reverting to "stopped". I'll restart it using either Printer set-up utility or Server Admin but when a job goes through it just stops again.
The printer is set up to print using IPP and is set to enforce quotas (not that that should stop the print queue anyway).
Please HELP as i've got 80 students wanting to print!
Here's the Print Error Log...
I [13/Feb/2006:12:59:42 +0000] Saving printers.conf...
I [13/Feb/2006:12:59:42 +0000] Printer 'Mac_Room' started by ''.
I [13/Feb/2006:12:59:42 +0000] Started filter /usr/libexec/cups/filter/cgpdftops (PID 28567) for job 2492.
I [13/Feb/2006:12:59:42 +0000] Started filter /usr/libexec/cups/filter/pstops (PID 28568) for job 2492.
I [13/Feb/2006:12:59:42 +0000] Started filter /usr/libexec/cups/filter/fierycupsfilter (PID 28569) for job 2492.
I [13/Feb/2006:12:59:42 +0000] Started backend /usr/libexec/cups/backend/lpd (PID 28570) for job 2492.
W [13/Feb/2006:12:59:43 +0000] [Job 2492] Remote host did not respond with command status byte after 300 seconds!
W [13/Feb/2006:12:59:43 +0000] [Job 2492] Remote host did not respond with command status byte after 300 seconds!
W [13/Feb/2006:12:59:43 +0000] [Job 2492] Remote host did not respond with control status byte after 300 seconds!
E [13/Feb/2006:12:59:43 +0000] [Job 2492] Remote host did not accept control file (54)
E [13/Feb/2006:13:00:13 +0000] PID 28570 stopped with status 1!
I [13/Feb/2006:13:00:13 +0000] Hint: Try setting the LogLevel to "debug" to find out more.
W [13/Feb/2006:13:00:13 +0000] [Job 2492] Remote host did not respond with command status byte after 300 seconds!
I [13/Feb/2006:13:00:13 +0000] Saving printers.conf...
I [13/Feb/2006:13:00:29 +0000] Saving printers.conf...
I [13/Feb/2006:13:00:29 +0000] Printer 'Mac_Room' started by ''.
I [13/Feb/2006:13:00:29 +0000] Started filter /usr/libexec/cups/filter/cgpdftops (PID 28578) for job 2492.
I [13/Feb/2006:13:00:29 +0000] Started filter /usr/libexec/cups/filter/pstops (PID 28579) for job 2492.
I [13/Feb/2006:13:00:29 +0000] Started filter /usr/libexec/cups/filter/fierycupsfilter (PID 28580) for job 2492.
I [13/Feb/2006:13:00:29 +0000] Started backend /usr/libexec/cups/backend/lpd (PID 28581) for job 2492.
W [13/Feb/2006:13:00:30 +0000] [Job 2492] Remote host did not respond with command status byte after 300 seconds!
W [13/Feb/2006:13:00:30 +0000] [Job 2492] Remote host did not respond with command status byte after 300 seconds!
W [13/Feb/2006:13:00:30 +0000] [Job 2492] Remote host did not respond with control status byte after 300 seconds!
E [13/Feb/2006:13:00:30 +0000] [Job 2492] Unable to send LPD command: Broken pipe
E [13/Feb/2006:13:00:30 +0000] PID 28581 stopped with status 1!
I [13/Feb/2006:13:00:30 +0000] Hint: Try setting the LogLevel to "debug" to find out more.
I [13/Feb/2006:13:00:30 +0000] Saving printers.conf...

I've had problems with the print queues in 10.4.x not taking print jobs after the server is restarted. Do a port scan on the server to see if port 515 is open. If it isn't then try restarting the print service on the server. Port scan the server again and see if port 515 is open. If it is open now try printing. I also had problems with ipp printing so have reverted all my clients to LPR. Some client machines I have switched to direct ip printing to the printer. The print queues in 10.4.x haven't been very reliable. I hope this helps.

Why is Logic Express 8 keep stopping after 2 sec, every time I press play? Help!!!

Why is Logic Express 8 keep stopping after 2 sec, every time I press play? Help!!!

Its likely to be caused by Ozone5.. many people have reported that plugin is currently quite unstable and are awaiting updates from izotope to fix the problem... No ETA has been given by izotope for the fix however...
Also several of your plugins are out of date (Zebra2, Clariphonic, Ozone itself.. to name but a few,)
Finally, you are running an older version of Logic Pro X (10.0.3)...and I would normally suggest you update to the latest version but... if you have a USB2 audio interface do not update to 10.0.5 at this time.... unless you know it will work correctly with the new version of LPX.

After an automatic update yesterday, I can only print email (Outlook Express 6) headers but the messages do not print. I now have Firefox 3.6.22.

After an automatic update recently, I can only print email (Outlook Express 6) headers but the messages do not print. I now have Firefox 3.6.22.

Thanks John for the suggestion. I was finally able to dwonload the newest drivers today when I signed on. Seems like if you let one day go by Software Update will look at your version of the driver and will finally let you download the newest. That did not help. Nothing but communication errors. It would not even let me load the the new driver as it would no longer ever see the printer.
Yesterday, for further explanation, I was working at the computer when I heard the printer chime a few times. When I looked over the green light, which normally signals it is receiving a file to print, was flashing away. I was doing nothing and I finally had to turn it off. I spoke with another techie friend who is a big Mac user and has the same printer and he suggested it may be the USB circuit. This printer has been on for 5 years with a few days off. We have concluded the circuits are past their useful life and I will soon send the printer to be recycled somewhere. A new printer is on the way as I need this device.
Again, thank you for your suggestion and I will mark this solved due to mechanical failure.

My HP Photosmart 5514 makes a machine gun sound after printing. How to stop it?

My HP Photosmart 5514 makes a machine gun sound after printing. How to stop it?

Hi
Please check these documents and steps in them and check for any blocks or any paper in the printer and it might be blocking the carriage movement....
paper jam doc :http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02865752&tmp_task=solveCategory&cc=us&dlc=en&lc...
Carriage jam : http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02865805&tmp_task=solveCategory&cc=us&dlc=en&lc...
Noise while printing : http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01931887&cc=us&dlc=en&lc=en&product=5096386&tmp...
Regards
Aneesh
I Represent HP
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!...

ITunes 11 airplay stops in middle of songs, why?

We have iTunes 11 on a MacBook Air with Lion (10.7.5, all current updates). Occasionally, in the middle of a song playing over Airplay, iTunes stops streaming the song. As best we can tell it appears to be random. If we go back to a song that it previously stopped on, but it doesn't stop again. Thought it may be Energy Savings settings, but it's set for 3 hours before sleeping, and 2 hours to turn off screen. Now "Put the had disk to sleep..." is set, and perhaps this is it. But according to my wife, this never happened under iTunes 10.x, it has just started with iTunes 11.
I'll try the "hard disk sleep" setting and report back, but any other ideas?

I am having the same problem, with a similar model of iMac (early 2007). I play my music through my sound system using my Apple TV 2 and airplay. It has worked perfectly until I updated the Apple TV, Mountain Lion, and thus, iTunes, on Nov. 30th. Now, the music just stops after 30-45 minutes, in mid-song, just as Fox8 described. So far, I have: rebooted the computer, reset the Apple TV to factory settings, rebooted the Apple Extreme router, restored the computer to 2:00am on Nov. 30th (itunes would not run at all, saying that the music library was created with a newer version), re-updated Mountain Lion and itunes... everything I can think of. Still, the music stops. I have eliminated the Apple TV (streams Netflix and iphoto just fine), and the router (ditto) The only thing that leaves is either a Mountain Lion problem or an itunes problem. I hope Apple gets this resolved; if anyone has found a solution, please post it here.
I am going to try to stream via Airport Express and see if that works, using an iDevice as a remote. Apple delayed the release of itunes 11 so it would be right, but it appears it's not quite there. We need a 11.01 patch. Quickly, please. Or at least a way to downgrade to the version that did indeed "just work."

Airplay issues after IOS 8 upgrade

After the latest IOS 8 upgrade I have a lot of issues.
Both my ipad and iphone are upgraded to IOS8 and after that I can't stream video to my apple tv, you can see that airplay is tries to connect to my apple tv but returns to the ipad/iphone screen after ~5 seconds. Besides of that both devices also have streaming difficulties to my B&W a7 speaker, problem with this one is that it will stop after 15 minutes and to get is working I have to restart the device.
With IOS 7 I didn't have problems at all.
Do others also have this many problems and what can I do about it?
I already tried:
- Restart ipad/iphone
- Closed all active programs via the home button
- Power cycled apple tv / remote speaker
- Reset ipad/iphone (power + home button)
- Re-install all related apps (remote, B&W, video streaming apps)
- Reconnected to my home network
Since I didn't have a problem before the upgrade and this occured on 2 devices after the IOS 8 upgrade, I would say this must be related to the upgrade.
Hope someone can give me an advice.

I was able to recover my voice memos, though the original titles are gone.
I opened my Voice Memos app like everyone else and I saw each memo quickly deleting and acting glitchy. I then connected my iPhone to my macbook so I could attempt to restore the backup I had made before the ios8 update. It said it couldn't be done because there wasn't enough room. However, when I opened my memos app again, the voice recordings were there! I can't verify if it's all of them but I'm grateful I was able to recover some.
I use this app to record lyrics on the go and I'd really like Apple to step up and fix this.

PowerPoint using macro to delete text boxes after printing

Hi,
We created custom shows in Powerpoint and are running a macro to insert temporary page numbers on the slides before printing. The issue is that I need to remove the page numbers after printing. I'm a novice at VBA so I'm sure there is an easy
solution, but nothing I've tried so far has been successful. The code is displayed below for your reference. Any help is greatly appreciated. Thanks!
Sub PrintCustomShow()
      ' Change this number to specify your starting slide number.
      Const lStartNum As Long = 1
      ' Ask the user which custom show they want to print.
      Dim strShowToPrint As String, strPrompt As String
      Dim strTitle As String, strDefault As String
      ' See if any custom shows are defined.
      If ActivePresentation.SlideShowSettings.NamedSlideShows.Count _
         < 1 Then
         ' No custom shows are defined.
         ' Set up the string for the message box.
         strPrompt = "You have no custom shows defined!"
         ' Display the message box and stop the macro.
         MsgBox strPrompt, vbCritical
         End
      End If
      ' Find the page number placeholder; if found, pick up the style.
      Dim rect As PageBoxSize
      Dim oPlaceHolder As Shape
      Dim bFound As Boolean: bFound = False
      For Each oPlaceHolder In _
         ActivePresentation.SlideMaster.Shapes.Placeholders
         ' Look for the slide number placeholder.
         If oPlaceHolder.PlaceholderFormat.Type = _
            ppPlaceholderSlideNumber Then
            ' Get the position of the page number placeholder.
            rect.l = oPlaceHolder.Left
            rect.t = oPlaceHolder.Top
            rect.w = oPlaceHolder.Width
            rect.h = oPlaceHolder.Height
            ' Get the formatting of the slide number placeholder.
            oPlaceHolder.PickUp
            ' Found the slide number placeholder, so set the
            ' bFound boolean to True.
            bFound = True
            Exit For
         End If
      Next oPlaceHolder
      ' See if a slide number placeholder was found.
      ' If not found, exit the macro.
      If bFound = False Then
         ' Unable to find slide number placeholder.
         MsgBox "Your master slide does not contain a slide number " _
            & "placeholder. Add a " & vbCrLf & "slide number placeholder" _
            & " and run the macro again.", vbCritical
         End
      End If
      ' Set up the string for the input box.
      strPrompt = "Type the name of the custom show you want to print." _
         & vbCrLf & vbCrLf & "Custom Show List" & vbCrLf _
         & "==============" & vbCrLf
      ' This is the title of the input box.
      strTitle = "Print Custom Show"
      ' Use the first defined show as the default.
      strDefault = _
         ActivePresentation.SlideShowSettings.NamedSlideShows(1).Name
      ' Obtain the names of all custom slide shows.
      Dim oCustomShow As NamedSlideShow
      For Each oCustomShow In _
         ActivePresentation.SlideShowSettings.NamedSlideShows
         strPrompt = strPrompt & oCustomShow.Name & vbCrLf
      Next oCustomShow
      Dim bMatch As Boolean: bMatch = False
      ' Loop until a named show is matched or user clicks Cancel.
      While (bMatch = False)
         ' Display the input box that prompts the user to type in
         ' the slide show they want to print.
         strShowToPrint = InputBox(strPrompt, strTitle, strDefault)
         ' See if user clicked Cancel.
         If strShowToPrint = "" Then
            End
         End If
         ' Make sure the return value of the input box is a valid name.
         For Each oCustomShow In _
            ActivePresentation.SlideShowSettings.NamedSlideShows
            ' See if the show is in the NamedSlideShows collection.
            If strShowToPrint = oCustomShow.Name Then
               bMatch = True
               ' Leave the For loop, because a match was found.
               Exit For
            End If
            ' No match was found.
            bMatch = False
         Next oCustomShow
      Wend
      ' Get the array of slide IDs used in the show.
      Dim vShowSlideIDs As Variant
      With ActivePresentation.SlideShowSettings
          vShowSlideIDs = .NamedSlideShows(strShowToPrint).SlideIDs
      End With
      ' Loop through the slides and turn off page numbering.
      Dim vSlideID As Variant
      Dim oSlide As Slide
      Dim Info() As SlideInfo
      ' Make room in the array.
      ReDim Preserve Info(UBound(vShowSlideIDs) - 1)
      ' Save the current background printing setting and
      ' then turn background printing off.
      Dim bBackgroundPrinting As Boolean
      bBackgroundPrinting = _
         ActivePresentation.PrintOptions.PrintInBackground
      ActivePresentation.PrintOptions.PrintInBackground = msoFalse
      ' Loop through every slide in the custom show.
      Dim x As Long: x = 0
      For Each vSlideID In vShowSlideIDs
         ' The first element in the array is zero and not used.
         If vSlideID <> 0 Then
            ' Add slide ID to the array.
            Info(x).ID = CLng(vSlideID)
            ' Get a reference to the slide.
            Set oSlide = ActivePresentation.Slides.FindBySlideID(vSlideID)
            ' Store the visible state of the page number.
            Info(x).IsVisible = oSlide.HeadersFooters.SlideNumber.Visible
            ' Turn off page numbering, if needed.
            If Info(x).IsVisible = True Then
               oSlide.HeadersFooters.SlideNumber.Visible = msoFalse
            End If
            ' Create a text box and add a temporary page number in it.
            Dim oShape As Shape
            Set oShape = _
               oSlide.Shapes.AddTextbox(msoTextOrientationHorizontal, _
                                        rect.l, rect.t, _
                                        rect.w, rect.h)
            ' Apply the formatting used for the slide number placeholder to
            ' the text box you just created.
            oShape.Apply
            ' Add the page number text to the text box.
            oShape.TextFrame.TextRange = CStr(x + lStartNum)
            ' Increment the array element positon.
            x = x + 1
         End If
      Next vSlideID
' Print the custom show. NOTE: You must turn background printing off.
             With ActivePresentation
             With .PrintOptions
             .RangeType = ppPrintNamedSlideShow
             .SlideShowName = strShowToPrint
             End With
             .PrintOut
            End With
      ' Restore the slide information.
      For x = 0 To UBound(Info)
         ' Get a reference to the slide.
         Set oSlide = ActivePresentation.Slides.FindBySlideID(Info(x).ID)
         oSlide.HeadersFooters.SlideNumber.Visible = Info(x).IsVisible
      Next x
      ' Restore the background printing setting.
      ActivePresentation.PrintOptions.PrintInBackground = _
         bBackgroundPrinting
   End Sub

Hi hlolrich,
According to the description, you want to remove the shapes which created after you print the presentaion.
I suggest that you name the shape you added with some rule, then we can delete thease shapes via the name rule.
And here is a sample that you delete the shapes which name contains the
myShape words on the first slide for your reference:
Sub deleteShapes()
For Each aShape In Application.ActivePresentation.Slides(1).Shapes
If InStr(aShape.Name, "myShape") Then
aShape.Delete
End If
Next aShape
End Sub
Also you can learn more about PowerPoint developing from link below:
How do I... (PowerPoint 2013 developer reference)
PowerPoint 2013
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problems with stopped HP Print Jobs on Mac OS 10.5.

I have several Mac Stations with different Mac OS X versions (Mac OS X 10.5-10.7) and bought 2 HP Laser Printers:
- HP LaserJet Pro 400 M401dw
- HP LaserJet Pro 200 M276nw
After installing the HP Driver SW on all Mac Stations I changed then on the Printers the dynamic IP address to static ones. The printing didnt work anymore from the Mac Stations. I re-installed all Driver SW on every Mac Station. Then Printing worked on every Mac, except only on the Mac OS X 10.5. Station the Print Jobs were always stopped after any Print attempt.
This appeared on the Mac OS X 10.5. Machine in the Printer Spooler Job Message Window and within the error_log File content:
- can't create PictWPSDoc from `/private/var/spool/cups/xxx'.ERROR during execution of pictwpstops. Error number -9783
As it seems like problems existed with file permissions I ran a complete Disk Utility File Permission Repair. Then another reinstall of the HP Driver Packages. - Still the same failures with stopping Print Jobs.
Then I read the README file of the Installation Package. And the quite simple solution was:
DE-INSTALL the HP Driver SW FIRST (with the HP Deinstallator), BEFORE RE-INSTALLING the HP Driver SW again.
So I did this, then no Print Jobs were stopped anymore and both Printer are happily printing.
The conclusion is, I guess, Mac 10.6..10.7 does not have problem with multiple re-installation of the HP driver SW. Only the Mac OS 10.5. did NOT work anymore after another reinstall of the Driver SW Package, and without de-installing it properly. The bottom line is to de-install the driver SW (and maybe disk repair) properly BEFORE another insallation wants to be done. This however solved my printing problems on the Mac OS X 10.5. machine.

Hi,
Please follow the link below :
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Flash movies stop after a random amount of time,

The problem that I am having is that flash movie files (Every website) play for a moment or two and then stop with the little “loading” symbol turning endlessly in the center of the screen. Flash movies used to work with no problem but over the span of the last few months it went from not working well to not working at all. In a perhaps related problem sometimes downloads will stop after a certain length of time and also seem to “hang” at a random spot. If I pause the reload and then restart it the program or whatever will usually finish downloading. This doesn’t happen often but does happen. The flash movie thing, though, happens every time – no matter what browser I have tried. (Firefox, IE, IE with no add-ons, and Chrome anyway.)
I have tried solutions that I have found all across the internet, including the Adobe and Microsoft forums, to no avail. I have unloaded flash with the Adobe uninstaller and reloaded flash. I have tried various flash releases – with and without a firewall on. I have made sure that I am using the 32 bit version of IE and even tried running everything in “administrator mode.” I’ve upgraded every driver that I can upgrade. I’ve used a registry checker as a last resort. I even used the Dell partition to return my computer back to the condition that it was in when I bought it and that didn’t change anything either.
Everything I have tried has made zero difference. In the hopes that someone will have another idea for me to try I am putting all the stats for my computer that I can think of below.
Qwest internet running at 20mbps
Flash 10.1.102.64
Shockwave 11.5.9.615
Microsoft Security Essentials
Tried both IE 9, IE with no add-ons, and now have IE 8 from when I restored from the partition image
OS Name             Microsoft Windows 7 Home Premium
Version                6.1.7600 Build 7600
System Manufacturer    Dell Inc.
System Model   Inspiron 560
System Type      x64-based PC
Processor            Intel(R) Core(TM)2 Duo CPU     E7500 @ 2.93GHz, 2936 Mhz, 2 Core(s), 2 Logical Processor(s)
Graphics - Intel(R) G45/G43 Express Chipset
Sound - Realtek High Definition Audio
BIOS Version/Date          Dell Inc. A00, 10/6/2009
SMBIOS Version               2.6
Hardware Abstraction Layer        Version = "6.1.7600.16385"
Installed Physical Memory (RAM)             8.00 GB
Total Physical Memory 7.96 GB
Available Physical Memory          6.94 GB
Total Virtual Memory     15.9 GB
Available Virtual Memory             14.4 GB
Page File Space 7.96 GB

Thank you for answering eidnolb -
Answering your questions...
Have you had a Virus and if so what Anti-Virus program removed it?
No virus that I am aware of
Since you have a Dell, McAfee came pre-installed? Did you remove it prior to Installing MSE? If so, did you use the McAfee Removal Tool or just remove it from Control Panel/Programs & Features?
My computer did come with McAfee which isn't on my computer now. I used a program called "Decrapifier" that removes unwanted preloaded software that comes with PCs.
Is McAfee still Installed?
No
Do you have any Anti-Virus/Spyware programs other than MSE?
No - I have just used MSE until now. I thought about using AVAST but was't sure what running 2 virus/spyware programs would be like.
Since MSE doesn't have a Firewall, do you use any Firewall other than Windows? If so, which?
I use Windows Firewall. I have tried both adding Youtube as an allowed program and switching the firewall off enirely with no luck.
Do you use a Router? Is it Wireless?
I do have a Lynksys router that is a little older but I've also tried hooking the modem directly to the computer.
Is Qwest wireless?
I use the wired ports and not the wireless for my connection.
Other than IE8, what browsers and versions are Installed now?
I only have IE8 now. I never reinstalled the other browsers after using the Dell partition. I prefer Firefox so having to use IE is frustrating.
I've also used "RegestryBooster" to make sure that my regestry looked okay.
Thanks again for taking the time to answer. I think you are right about me doing too much - LOL

Application crashes after printing

Sorry if this is the wrong forum, but we are a K-8 school district just beginning to Manage the network using AD/OD. Ever since we've begun this process, Word documents have crashed immediately after printing. Printing is not managed, but seems to have been adversely affected by us starting this process. Any help you can give would be much appreciated.

Sonal2890, thanks for your inquiry and I will try to provide as much information as possible.
1. What happens if inspite of using 'Print on both sides', you check Duplex setting from Properties dialog (As you do previously)?
      The Adobe Reader X Shuts down and is unable to print and displays a message stating it has incurred a problem. Please note, we are running IE7.
2. What happens if you print with any other application (Word/notepad)
     The documents print fine. IT is only when you print this particular document which is enabled in protected mode and double sided. Have tried the patch and the resolution of unticking the duplex methodology and the issue still persists.
     Crash Logs have already been submitted already. Have added the SEnd Error Report that was provided when the error occurs. The PDF stopped printing after page 6 of a 236 page document and provided the error above.

Airplay STOPS after printing on G Express

Similar Messages

Maybe you are looking for