Airplay Stuttering Issues - Troubleshooting Help
Hi all,
I've been having some Airplay problems for a while and all of the other forum posts or articles I've found online haven't helped. Here's a complete list of what works and what doesn't as well as my current WLAN settings.
Any ideas would be incredibly appreciated!
Hardware details:
Apple TV is on wifi (setup doesn't really allow for it to be wired)
Retina MacBook Pro (mid 2012)
iPhone 5s
iPad 2
Very responsive internet and wifi in every context except Airplay
Had the exact same setup at my previous residence (suburban house) but am now having these issues in my new apartment (city)
WORKS
Video Airplay from iPad streaming apps (YouTube, Hulu apps)
All Apple TV (3rd gen) direct streaming (iTunes Radio, Netflix, Hulu, etc.)
Airplay from iPad photos app
Airplay mirroring from iPhone 5s
Music.app streaming from iPhone 5s
Video Airplay from iPhone 5s
Ethernet: Airplay mirroring from RMBP (audio & video)
Ethernet: iTunes streaming
Software on all devices is up-to-date
DOESN’T WORK
Video Airplay from iPad local files (videos within GoodReader)
Wifi iTunes Airplay from laptop
Music.app Airplay from iPad (no sound from TV at all)
Spotify Airplay from iPad (stutters)
Airplay mirroring from iPad
Airplay mirroring from rMBP (one frame stays frozen)
Setting MacBook’s audio output to Airplay (stutters)
Spotify streaming from iPhone 5s
WIRELESS SETUP
Linksys E2500 (Documentation)
It seems like I've done everything that Apple suggests in its wifi router suggestions
**This problem existed before I disabled the 2.4GHz channel and I made the decision to disable it throughout this troubleshooting process.
Hello the_Tobman,
Thanks for using Apple Support Communities.
In order to troubleshoot performace issues with AirPlay between your devices, please follow the steps below.
Resolve performance issues with AirPlay or AirPlay Mirroring
If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express.
Try these suggestions:
Ensure that other devices are not trying to stream to the same Apple TV at the same time.
Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
If possible, try to locate your Wi-Fi router in the same room as your iOS device and Apple TV.
If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
If you are using iTunes, please see these troubleshooting guidelines.
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Take care,
Alex H.
Similar Messages
-
AE and Computer- Audio dropping out and stuttering issues
Hi all,
I recently bought an Airport Express 2 weeks ago. I hooked the unit up in my bedroom via ethernet(roaming) method. I use Airplay and turn on Computer and Airport Express to play both in my living room and my bedroom at the same time. Problem is I'm noticing my iTunes in my living room exhibits some stuttering during songs or the audio will start to drop out intermittently and sometimes shuts off completely but the Airport Express is still playing in my bedroom without issue. I've tried turing off the wireless but it doesn't do anything. When I turn off AE in Airplay and just play using the Computer it works fine. I'm not sure what can be causing the interference but it seems its between my computer and AE when they are both turned on. I would appreciate any suggestions forum members have to help me resolve this issue. I have the 2nd generation AE. Thanks a lot.
MactheminiHi Macthemini,
Thanks for using the Apple Support Communities. It sounds like you are experiencing issues with AirPlay between iTunes on a Mac mini and your AirPort Express. The following resource outlines troubleshooting issues for AirPlay performance:
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
http://support.apple.com/en-us/HT203822
Troubleshooting performance issues
Wi-Fi Connection
If you are experiencing intermittent playback or significant network lag with AirPlay, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your AirPlay-enabled device.
Ensure that other devices aren't trying to stream to the same Apple TV at the same time.
Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
- Matt M. -
When the user Miro Generating:-
1. Give the Ref.No.Business places,
service Sheet No.
and the G/L No.. its take in production server,
But here actual its upated Medical Aid,G/l
But its comes in Rawmaterial exemption,account i.e not relevant account
actual Here its comes in G/L medical account
How its overthe issue plz help for me.
2.In before indevelopment server do that same thing in DEvelopment server, its Give the Error mesage i.e DELIVRY NOT SERIVICE ETNRY SHEET ..............(number) doest not exitHello,
There are several public KB articles that may apply to your situation. But, rather than try and list them all here for you, I suggest you go here:
http://btsc.webapps.blackberry.com/btsc/microsites/microsite.do
Search on the exact error message and see any of the resulting articles are on point to your situation.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Mid 2010 15" MBP i5 A1286 POWER ISSUE-PLEASE HELP-
The MBP works fine when mains connected but the only issue is every time I take the charger out it shuts down on me!!! So I have checked with a multitester & looks good the only thing i find hard to check for power is the battery itself as its hard to get a good connection, also I took to local Apple store & they checked with a new battery but said its still same issue so the guy disconnected nearly all the connecters off to check if they causing issue & he said now the battery is charging.
So they still have the laptop to do further tests etc, but I’m not sure what could be the problem hear as maybe there is some component which is bad so the battery’s not charging or what else could be the issue please help & advice as I’m really confused as if it was something to do with the logic board then surely it would not even charge even after checking with the multitester or like Apple genius done by disconnecting other components...
ANY HELP OR ADVICE WOULD BE HELPFULL,
THANKS GUYSTHANKS FOR THE HELP GUYS!!! BEEN AROUND 5 DAYS & NOT ONE PERON HAS HELPED...
BUT YEAH THANKS AGAIN...
WASTE OF TIME THIS IS... -
I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped -
Why does my ipad2 no longer receive photos on iMessage? Iphone works perfectly with iMessage photos. Ipad2 used to work fine. Is it an ios8 issue? Help!
Hello,
Where may I be able to contact and speak with a prepaid representative? Strictly through phone calls? (I am at work 12 hours a day)
And I apologize for posting in the wrong area - I saw Apple support so I went here.
I'm almost certain my phone is the problem. I have gone through resetting the network settings a dozen times on my phone, even did it on my dad's. Now my texts are beginning to do the same when I text my fiance.
Resetting the network settings DOES work -- the problem is it will work for a day or two or for only a few hours - then I'll have to do it all over again. -
Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!
Also - my battery has been telling me "service battery" for a LONG time and then it switched to "replace soon" som time ago. Can't really see what this has to do with anything but whatever.
That could conceivably explain all the problems you're describing. Replacing a Mac's battery should not be postponed since a failed battery will cause other problems to occur. It is also possible that its hard disk has failed, which means the information on it may soon become unrecoverable.
... my latest TM back up was from April 2014, can I just run this when I have rescued everthing and then it might not be as slow?
If that Time Machine backup remains intact, it may be the only viable means of recovering that Mac's information. I suggest you do not attempt to restore its contents to your ailing Mac.
Given that you are having trouble creating a newer Time Machine backup you should stop using that Mac immediately and have it serviced as soon as you are able. Do not take it to anyone other than Apple or a service facility authorized by Apple, for the very reasons you explained. If there are no Apple Stores in your vicinity search for an Authorized Apple Service Provider using the Contact Us link below. Use one of the options that appear under Contact Apple Support. The language on that page will be different for your location. -
My iphone 4 has died and says connect to itunes. itunes restore wont work, error message 2001, then 2006 appears.Tried all the troubleshooting help, but nothing works. Any ideas???
I solved my own problem. Hopefully this will help someone else.
I did a DFU restore, then started it up as a new phone on iTunes. Everything loaded properly, then from iTunes did a restore from backup, selected the one I wanted and it still took me to the same screen with 3 options of restore. I chose the start up as new phone from the actual phone and after all the syncing was completed, my phone is back in working order. -
After updating to 10.6.3, I installed the 10.6.8 update just to start experiencing these font issues. HELP! How do I get the fonts to display correctly in my browsers especially (Chrome & Safari)
What I ended up having to do was open up the Font book & remove duplicates. I knew it was Arial that was causing the problem, so I deleted the duplicate of that font. Inadvertantly I deleted all the Arial regular font, so I had to reinstall one copy. That was the solution. Thanks!
-
Hi iam using IPHONE4 , when i coonect it to my PC , itunes get hang and don't detect my iphone , how i can sort out this issue plz help me
iPhone, iPad, or iPod touch not appearing in iTunes
-
Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?
Well!
If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
This does not have to be huge just big enough to house your most current Jobs
Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
The Drobo would be relegated to Vaults and backups
You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-) -
Visual Studio 2013 Setup and Installation gets stuck at system restore point. what are the issues?, help me out ASAP
Hello nitinrathod29,
There are some possible fixes for this issue.
Please check the following thread:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/47bc6990-00f2-4d85-b3f8-9de03c637f43/visual-studio-2013-update-2rc-stucks-on-creating-system-restore?forum=vssetup
https://social.msdn.microsoft.com/Forums/vstudio/en-US/81478f51-37bb-4dbb-bd0c-beade1fd50ab/visual-studio-2012-professional-installation-getting-stuck-creating-a-system-restore-point?forum=vssetup
So here are them:
1. Check if you have any software which may prevent the installer from running. For example, Windows Defender or any other software which may restrict your permissions.
2. Just start the computer.
3. Run the setup as admin.
4. Check your UAC permissions.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi there,
Hope you can help me out here.
I've recently purchased a 15" i7 Macbook pro. The machine is but 3 weeks old &, of course, very well looked after.
A few days ago, the built-in trackpad started behaving eratically. Cursor moving by itself, not responding to touch, clicking and opening things involuntarily. Not good at all. Many users seem to have had this exact same issue.
These problems seemed to miraculously stop after a few re-boots and possibly a software update? I really couldn't tell you what resolved the problem.
Unfortunately I now have a totally different problem.
There is a thin, possibly 8 to 10mm horizontal strip across the centre of the trackpad that no longer responds to touch. If I move my finger from the botom of the trackpad upwards (or vice versa), the cursor will stop momentarily as it passes over the horizontal strip. The buttons are fine and the rest of the trackpad is fine. For the moment, I've increased the cursor acceleration so that I can at least navigate round the screen with a smaller area of the trackpad. USB magic mouse seems to work fine.
If anyone else has experienced this &/or found a solution for this issue, please help me out here. I have rifled through endless threads about MBP trackpad issues with little success & do not live close to an apple store/genius bar.
This is a 3 week old machine that cost me a small fortune. To be getting software/hardware issues so early on in it's lifespan is really rather worrying for the future.
Appreciate your help here.
JI'm not sure what caused this, but I extended my lunch break and drove the machine down to the Westfield apple store. I didn't have an appointment with the Genius Bar but I managed to persuade one of the staff to speak to a technician in the workshop. She came back into the store and told me that they had replacement trackpads and that , considering the machine was only 3 weeks old, the technicians kindly sandwiched the repair into their timetable at zero cost. 2 Hours later, I now have a perfectly functioning trackpad/machine.
I can't thank them enough.
My only gripe is that I couldn't speak to a technician to find out what the problem was, how they resolved it or what causes these issues for future reference. Understanding why these problems occur often helps to build your own framework of understanding. Most of the threads i've read about trackpad issues are largely unresolved with people only speculating the problem/solution.
The initial issue I had with the trackpad's erratic behaviour seemed to be a well known problem that many are associating with a trackpad firmware update. Unless by pure coincidence I had an immediate & major hardware fault after it, which is unlikely, my personal guess is that the two issues were related. -
I can not buy in-app purchase in application name clash of clan My balance in Apple ID is sufficient to buy that item. Please kindly help me on this issue.Your help would be appreciated.
What happens when you tru buy items in it ?
If you are getting a message to contact iTunes support then you can do so via this page and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ? -
Hello,
I have got a major prolen during transport.
I have GEMPLOYE1 Which is a time dependient master data. which has Attribute called 0COUNTRY_ID.
I have a custome attribute Called Actual PSGroup/Grade GPAYSCGR which has a compounpunding attribute 0COUNTRY_ID
Now when I am trying to transport PSGroup/Grade GPAYSCGR to QA that transport is failing , the log massage is
Characteristic GEMPLOYE1: Attribute GPAYSCGR compounded to 0COUNTRY_ID has a diff. time-dpdncy
If any one saw this issue, please help me to fix the same.
SamitHi Venu,
We can't add authorisation objects on Individual servers.We need to add authorisations on BWD ie Dev system and transport to BWI QUA system.This is the Process we need to follow as per our rule set.
So,As the problem mentioned above if i add some auth. objects on BWD DEV system and transport it to BWI QUA system,it is getting transported Successfully to BWI,but the auth.objects what i have added on BW DEV system is not found on BW QUA system.
What could be the problem for that,Is that the problem with transports like TP error or is it related with some tables of auth.objects...................
Could u please analyse the problem and tell me the solution for this..........
Thanks Much
Swapna.D
Maybe you are looking for
-
How do you add your contact picture to a text message?
I want to be able to see my contact pictures whenever I text someone from my contacts list. How do you put your contact pictures on a text message for iPhone 6? I can see my contacts pictures when I send/receive a group text but not an individual tex
-
HT1338 There is a black caption/dialogue box on my screen and I can't get it to stop
There is a black caption/dialogue box on my screen and I can't get
-
How can i detect the Firefox the Popup blocker settings by using javascript, so that i can show message to user, saying" popup settings are on, please turn off or allow the site". can any one help me out. Thanks in advance.
-
HOW TO BRING BATCH SPLIT ITEMS ONLY IN INVOICE
Hi Team, We Have Following Business Scenario: We Have already made a sales report in which we were fetching batch from VBRP table. 1.Reason that when i do batch split and do Invoice I want to bring only Batch items in invoice. (I Have configured & C
-
Regarding HTMLBusiness Functions.
Hi All, In ABAP Workbench when we click <b>Tag Browser</b> the first node displayed is HTMLBUsiness Functions under this node there are various nodes like: Wizards Pushbuttons Fields General , etc. etc . What is the use of these functions and how can