AirPlay video and audio separatly

Hello.
Is it possible to transfer video (only image) via AirPlay to one Apple TV and sound from this video via AirPlay to another Apple TV or for example to B&O Beolit 12?
I want use my iPhone 4S with Epson projector wirelesly and I want also wireles sound through good speakers.
Thanks for your answers.

On Apple TV is optical audio output, that means I will need one cable to connect ATV with speakers? Or ATV can distribute audio signal via WiFi to the other devices? I want to minimize cable count.
Thanks for your answers.

Similar Messages

Yosemite airplay video and audio stutter

After upgrading to the official Yosemite /not the beta version/ on my iMac 2013 and MBP the airplay streaming of video and audio through any of my two Apple TVs results in intermittent audio and video stuttering which can drive one crazy. Sound and picture are choppy no matter from which computer or to which apple tv streaming is implemented. Any advice how to fix this issue - airplay has become practically unusable to me and family....

You can see here that many people report for this problem.Unfortunately, OS X Yosemite has a minor bug and can stream correct video and audio to Apple TV via AirPlay. You can not do nothing expect to wait for next OS X update. I have same problem and can use my apple TV.
I don't know why Apple doesn't fix this before official OS X Yosemite release, because this problem was report in there beta program from many users.

Airplay video and audio choppy after Yosemite upgrade

i can not play music or audio reliably using AirPlay after Yosemite upgrade, it's quite choppy until I turn off Bluetooth mouse.
Has anone come across this issue or figured out how to fix it.

I've had a similar issue with a not very fluid stream of mirrored or extended display in Yosemite. Even my iPad's mirror image came out shoppy. So I followed some threads advice and turned off bluetooth on the AppleTV and now I can even play games without having to look at the iPad.
Even streaming a movie from my Mac is possible in mirrored / extended mode (if it's nothing too important as there are occasionally frame drops here and there) but very few in comparison with bluetooth on.
Hope this helps. I'm sure Apple will have a fix ready soon enough.

Combining Separate Video and Audio tracks

Hi, what's the best way to combine a video and audio tracks into a single file? We will be given the video and audio from 13 volleyball games, and each game will be coming as a file.mpg (mpeg2) video and an mp3 file.
We're looking for a way to either manually bring it in, or bulk automate a way of combining the two tracks for each game to have one file that is in a format that doesn't need to be rendered in FCP.
Thanks!

Seems like there should be some way to combine clips somewhere though? < </div>
Not if they're form separate devices or in different codecs. the MPEG2 files are the big problem, next time, have your people shoot conventional DV and use the audio interface to bring in a feed from your announce booth or radio station or whatever so it's in sync.
bogiesan

Independant video and audio tracks separate

I am using Premiere Elements 12 on a PC. I am working on a multimedia project combining video, stills and audio. Independant video and audio tracks separate when I insert a still image on another track. The tracks are not grouped or linked together. I do not know how to prevent this happening. The manual suggests pressing the Alt button when inserting but this does not work.

skinnymurray
Holding down the Alt key of the computer main keyboard does work and works well under most ordinary conditions. Please practice and refine your Alt technique with care patience. But....
Have you tried keeping certain parts of your established track content together by using the Group command after selecting a
bunch of clips all at one time?
Please review the following free online video tutorial which I post for informational and non promotional purposes
https://www.youtube.com/watch?v=IqRT8OzdxVc
I am having a lot of trouble with Internet connection today due to local storms. The above link was snowy when I viewed
it but it should be OK if your Internet connection is OK. I will monitor this situation. The information given in that video tutorial relates to your question.
We will be watching for your results.
Thank you.
ATR

I get silent audio after i separate the video and audio

I'm using vintage video that I downloaded from the Internet. in one project I separated the audio and video, ditched the audio, and exported, via share, the visual clips I need for my final video. in a new project, I imported the segments to place over the audio I created with music software. the segments have a silent audio, that is, it has a part that goes on the audio track, but it's silent. it covers my audio and I can't hear it. I don't know why this happens or how to avoid it. help!
Thanks,
Rosateresa

Rosateresa
What version of Premiere Elements are you using and on what computer operating system is it running? Are you working with sources that come with copyright? For now I will assume no copyright protection involved.
I understand what you are doing through the point that you get rid of the original audio of a video file that has audio linked to it.
And, further I understand that you bring just that export video portion into a new project which has your "audio ...created with music software".
But after that I need clarification.
1. I would expect that, in the new project, you import the video to Video 1 to relate to the music that is already on Audio 1 or the Soundtrack.
I lose you when you write
the segments have a silent audio, that is, it has a part that goes on the audio track, but it's silent. it covers my audio and I can't hear it.
2. I am wondering if you are really saying that when you export the video portion of your file, the export has a video and audio component (silent audio component)? If that is the case, in the export settings under the Advanced Button of the export preset selected, place a check mark only next to Export Video. Remove the check mark next to Export Audio.
See example below from Premiere Elements 12 Windows. On the left...Export Settings and the Export Video and Export Audio boxes for check mark as needed. In the example I have a check mark only next to "Export Video".
3. But you can do everything in the same project, I would think. Right click the video with its linked audio, select Delete Audio. And then import your music into
that same project.
ATR

Syncing separate video and audio

My audio was recored separately from my video. (We used a clapper on set similar to a film shoot) After I have synced the video and audio on the timeline, is there a way I can marry both so whenever I open my video clip from the browser, the audio stays constantly sunk.

Merge Clips works most of the time but I have found the only dependable way to make sure audio and video stay together forever and ever is export it self-contained. For me, using DV, that's not a big deal.
Also to consider, your audio file may drift over time which may require breaking things up into 30-90 second clips.
bogiesan
Message was edited by: David Bogie Chq-1

Video and audio not synchrone with apple tv after update mountian lion on macbook pro

i have a problem with my apple tv. after i bought and instaled mountain lion on my mac book pro i have trouble with apple tv and my laptop. when my laptop conects with apple tv most of the time my wifi doesnt work on my macbook but on my apple tv it stil does work. when it does work and i play a movie of my own by using itunes the first second the video and audio is synchrone but after that audio is at normal speed but the video gets behind. and i am getting sick of it. does sumbody reconize the problem and can help me with this problem?????

Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
Playing light, locally hosted steam sidescrollers like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps.

Does the HDMI cable carry both video and audio? U

Does the HDMI cable carry both video and audio?
If so what is the purpose of the separate optical audio connection?
Just a little confusion setting the Apple TV Up with my AV receiver.
TIA.

You would use both HDMI and optical by connecting the former to a TV and the latter to a receiver that doesn't have an HDMI input so that you could play the audio through your stereo system.
You can use the HDMI alone, typically directly to the TV or through an A/V receiver, as HDMI does carry both video and sound.
For the year prior to the disastrous 4.4 updates a couple of weeks ago, you could use optical alone to add AirPlay music capabilities to your stereo system, so that you could stream music from iTunes and devices like the Touch and iPhone to your stereo. The 4.4 update broke that capability, requiring the use of HDMI for no reason. Lots and lots of people have been complaining about that bug, as it effectively bricks the Apple TV for anyone who bought it for this purpose but can't use the HDMI connection.

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

Recording Video and Audio at Same time with simultaneous sync

I want to record a keyboard performance into garageband and at the same time record the playing of that performance with my video camera. Then I want to create a movie using the music from garageband and the video from the camera. I was thinking that if I can sync the video and audio when I'm recording the session, then that part is taken care of. Or, maybe this is easier than I think it is?
Is there a way to do this so that I can use the garageband record performance and have it synced to the video on the camera?
I don't want to use the audio from the video camera because the performance that is captured in Garageband will be much better and I can do editing of the individual notes in GB.
In the end, I just want to make a movie and/or podcast of the performance.
I'm a newbie regarding this, but I did search the forums and couldn't find anything specific. Mostly it was about importing video into GB3 and then syncing new audio. I'll basically have audio and video from the same performance in two separate locations and I want to bring them together perfectly in Garageband.
Thanks for any help you can provide.
Powerbook G4 - DVI Mac OS X (10.4.9)

Okay. I got the video and audio all together. I told you I'd link to it when it was up.
http://www.youtube.com/watch?v=FxssYpUNJm8
There's also a copy of it at http://www.myspace.com/bonjimmy/
And as a quick side comment, even though I uploaded the same video to both YouTube and MySpace, the MySpace version is much better. YouTube must do something to the video after it's uploaded.
What I learned doing this project:
I recorded the video first (which gave me the sequencing of the piano performance) and then I dubbed the audio in later. However, there wasn't a good way to sync the video and the prerecorded piano, so there are some spots where the dubbed audio vocal isn't accurate to the video. I'm not sure what the pros do for this. I was hoping I'd remember how I sang for the video but when a couple weeks go by before re-doing the audio, it's about impossible. I tried, though.
I remember working with an old 4-track and smpte to a sequencer a long time ago. With the way it is now, it's pretty cool that you can record digitally and mix and match and everything falls together perfectly as long as you have a place to match the video and the audio. It's pretty cool.
What else???
Does anyone have suggestions that would have made it better? Also, if you have suggestions on my performance or whatever, I'd love comments, but you can do that on the linked page.
Thanks again for all your help. (The point of the video is because I'm thinking about getting back out there and doing some more playing... I'm looking for a band or something else interesting...)
Powerbook G4 - DVI Mac OS X (10.4.10)

Cutting and saving individual video and audio files from a clip

I have to cut 201 individual video and audio files for separate scenes from an 11-minute animated episode and save them as separate MP4 video and MP3 audio files. What is the most efficient way to do this?

Without knowing more about your project, it's hard to even guess at the most efficient workflow.
Like: Do these clips have audio or are you adding it? What format are these clips? What is the intended delivery for the 11 minute movie?
As a general matter, one creates an event, imports clips to it. Then organizes the clips according to the needs of job, using keyword collections and ratings. Then creates a project and starts a rough cut by marking ranges in the event browser and editing to the time line. Some people start with the music, making that the primary storyline mark where they want the edit to be and cut to that.
Upon finishing, one can choose one or more of the "destination" presets. It's possible to export Audio only or Video only or both. MP3 is one of the audio choices. Some of the presets are MP4. If you want possibly better quality and more control, export the files as master files and encode in Compressor.
Good luck.
Russ

Video and Audio Mixed Playlist Idea...

Ok guys...would anyone else like the following functionality in iTunes?:
I'd love to set itunes up for a party, and make a playlist that includes BOTH video and audio files (you can already do this....so, cool so far)....
Then, I'd hook my output up to my plasma TV. When itunes is playing an audio track, it would have the visualizer up, when it comes to a video track the video would automatically replace the visualizer...then switch back when it encouters another audio track.
Imagine once you had 100 music videos, or even 50 mixed into your playlists...It would be your own personal video jukebox.
Am I crazy or would anyone else want to be able to "present" their playlists like this?
as a sidenote: i'm quite impressed how well these videos scale when you play them on a television. on my $5k plasma, they look as good as broadcast television, but not as good as HD or DVD, obviously. So, anyone complaining about quality is probably trying to watch them full screen on a 1024X768 or larger monitor....thats to be expected.

i was just looking here to see if there was a way to do this for my party tonight.
guess not. a shame
so instead of putting videos in the shuffle, i'll put them in a separate playlist and switch over at some point

Video and audio manipulation

I was reading the documentation for the media and all other related classes, and while there is functionality for video and audio playback, there doesn't seem to be any exposed lower level functionality in order to do things such as simple video and audio manipulation. I was wondering if there is any known way to achieve this? Also, is there any plan to incorporate something of this nature into JavaFx? Thanks in advance.

Only things I can see in jira for this are:
1. http://javafx-jira.kenai.com/browse/RT-19742 "Support simple video filters, like deinterlace, in MediaPlayer" (currently unscheduled)
2. On http://javafx-jira.kenai.com/browse/RT-19582, Brian mentions "we already have separate issues on file for ... and 2) playing from a byte stream.", but I can't find a reference to the jira to play from a byte stream (I guess it's not public).
If you can create a pretty specific and concise feature request, preferably backed with a use-case example, you can file it for consideration at http://javafx-jira.kenai.com

Video and audio freezeing

For some reason my computer has been running super slow. When watching video like youtube and ustream. My video and audio will randomly start freezing which is super annoying, kind of like a skipping cd or dvd. I have reset safari and cache and its still doing it. i dont know what else to do any sujestions? thanks

Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

AirPlay video and audio separatly

Similar Messages

Maybe you are looking for