Airplay with airport express don't work with iphone

Hi all
airplay don't work with my iphon4S. But with my Ipad3 it works fine. Also AppleTV works with iphone and ipad....
so i don't understnd this situation?

Is your wireless set to "On" on the iphone? If so, try cutting the phone off and then back on.

Similar Messages

My 5 year old Airport Expresses don't work with the new Airport Time Capsule?

My question is after wasting hours trying to install my new Airport Time Capsule, Ive noticed that the "Airport Utility" doesn't recognize any of my 4 five year old Airport Expresses. An error message says " This version of Airport Utility doens not support this (these) base stations"? Does that mean that their is no work arounds which means I have to purchase 4 replacements?

You need the older airport utility.. that can be installed on Lion or Mountain Lion.. it cannot be installed on Mavericks.. do you have an older computer even a windows one.. or can access, borrow or bribe a friend over for drinks with laptop.. then you can configure your expresses.. !!
There is a rather complex workaround on Mavericks.. when I posted it in the past.. Apple deleted it.. go figure.
Kappy's post is still there.
https://discussions.apple.com/message/24338414#24338414
Perhaps they like him more than me.

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Please locate the model number of the AirPort Express and post back that information.
The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
We are not sure what you mean by "does not work". Does this mean that the AirPort Express worked at one time and has just recently stopped working?
Have you installed a newer operating system on your iOS device recently?
Or, is this a new AirPort Express that you are trying to configure for the first time?
If yes, what service will the AirPort Express perform on your network?
Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

My head phone jack isn't working. Only works with the new headphones that have three rings at the bottom. My regular ones with two rings don't work with the computer anymore. Anyone know a fix?

My head phone jack isn't working. Only works with the new headphones that have three rings at the bottom. My regular ones with two rings don't work with the computer anymore. Anyone know a fix? Ive tried reseting my computer and that didnt work

Get the new keyboard at eBay and replace by yourself may be cheaper way, though you're required higher skill and well know about MacBook Air.
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0 .Xmacbook+air+2011+keyboard&_nkw=macbook+air+2011+keyboard&_sacat=0
https://www.youtube.com/watch?v=gLbasVD69xo

AirPort Express won't work with 7.0.2

Everything was fine til I bought a new Shuffle. It made me upgrade to 7.0.2, now my Airport Express won't work. I have firmware 6.2 and just uploaded all of the newest updates from apple.com for it (AX). The security is off on my network and the AX is connected with a green light. Still no option to choose my home stereo which is hooked up to the AX. HELP! I have spent all day trying to get this to work!!!!

My Airport Express when it is setup to extend my network while plugged into Ethernet will Create a network under settings
This is the correct setting to "extend" the network using an Ethernet connection. Technically, this is called a "roaming" network.
If I change this to Extend A Network it doesn't work properly.
This is because "Extend a wireless network" is used only when AirPort devices communicate with each other using wireless only......not Ethernet.
It would help if Apple used settings like "Extend a network using Ethernet" and "Extend a network using wireless only".....but they don't.
The AirPort Extreme will need to be configured as the main router if you want it to provide a Guest Network. It cannot do this if it is configured in Bridge Mode.

AirPort Express doesn't work with SB5100

I'm helping a friend set up a new AirPort Express MC414LL/A Model A1392 (802.11n) with her existing Motorola SB5100 DOCSIS 2.0 cable modem. I was able to setup the AirPort Express from her iPad with a network name and password. Also upgraded the firmware in the AirPort Express. However, the Airport Utility App on my iPad and iPhone connected to the AiPort Express, but showed no connection to the Internet. Furthermore, the PC that had been working fine when connected directly to the SB5100 could not make an Internet connection when connected to the AirPort Express.
I brought the AirPort Express home and connected it to my Verizon FiOS Actiontec modem and it works fine - my iPhone and iPad connect to it and through it to the Internet.
I'm wondering if the SB5100 is incompatible with the AirPort Express??

It should work.
Power down the modem and leave it powered down for a long time, as much as a half hour or longer is sometimes required. While it is powered down, disconnect its coaxial cable. Literally unscrew it and leave it that way.
Connect the Express to your modem, leave them connected, and do not disconnect them from one another without powering down the modem again.
Re-connect everything including power and let the devices complete their startup sequences. This usually takes a moment or two.
If that does not result in success, "hard reset" the Extreme or Express according to the instructions below and start over from the beginning.
If you still have trouble, contact AppleCare because you have done everything reasonable to get it to work.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Airport Express doesn't work with Mountain Lion

I installed Mountain Lion and now my airport express doesn't work as a way to play itunes through another set of speakers.
Not only that... but the airport utility doesn't support my airport express.
Time Machine doesn't work either....
I want my snow leopard back!!!
Any insight????

I understand that Airport Utility 5.6 must be used to configure it... but that being an older version... I can't install it with the new OS... RRRGGGGGHHHH Mountain Lion!!! I'm not liking the switch at all. I've spent more time fixing problems with this ... how can I go back???

Need Help...my wireless airport express will not work with my update of snow leopard

after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

Airport Express A1088 Not Working With iTunes 10 AirPlay but works with iPad & iPhone

Hi,
I'm really hoping someone can help me. I have just got an ADSL connection at home and have started using my Airport Express I've had for years but haven't used, model number A1088. I can use the Airport Express to use AirPlay from my iPhone, iPod and iPad. iTunes 10 on my 2010 13" MacBook Pro recognises the Airport Express as an AirPlay device, however when I attempt to play music through remote speakers using the Airport Express as the AirPlay device I receive the error message "An error occurred while connecting to AirPlay device "emptyk86 Airport Express". The network connection failed". I have performed numerous hard resets and resets within the Airport Utility, to no avail. I could accept that as the Aiport Express is quite old now, that it could be broken, but as it works for all iPhones, iPods, and iPads I don't understand what I'm doing wrong!
Thanks for your time.

The same thing started happening to me this morning. I have an old Airport Express, New MacBook Pro, recently updated to Lion, have the latest version of iTunes. Everything worked fine until this morning. I was playing music, stopped it, and when I tried to resume, got the error message. I turned evertying off and on and reset everything. The problem persisted. However, I had no problem playng music from my iPad library through the system using the iPad.
I have a remote app on the iPad and, oddly enough, found that I could play anything (playlists, songs, etc.) from the MacBook Pro iTunes library through the system using the iPad remorte app. Once I had that running, I went back to the MacBook Pro and found I had full functionality with iTunes on the MacBook Pro. I closed and reopened iTunes a couple of times on the MacBook Pro to test it, and found that sometimes it would work fine and sometimes I would get the error message. When I got the error message, I went through the procedure with the iPad to get it going, and that worked most of the time. When it did not work the first time, I found that playing a song from the iPad library first and then going to the remote app seemed to help.
For sure, this is more a workaround than a solution, but maybe someone who understands how these things work might recognize the problem and propose a solution.

Airport Express won't work with VPN

Finally made it through the nightmare of setting up my Airport Express to act as a wireless print server on my existing network (Linksys WRT54G router). However once I log onto my corporate VPN, I cannot print or even see the Airport. I have checked the LAN access box on the Transport tab of my VPN software which is supposed to allow split tunneling, but no luck. Everything works fine once I log off the VPN. I bought the Airport Express specifically because an Apple rep told me it would work with my VPN. My previous wireless print server (Linksys) would not support VPN.
Appreciate any help!

My Airport Express when it is setup to extend my network while plugged into Ethernet will Create a network under settings
This is the correct setting to "extend" the network using an Ethernet connection. Technically, this is called a "roaming" network.
If I change this to Extend A Network it doesn't work properly.
This is because "Extend a wireless network" is used only when AirPort devices communicate with each other using wireless only......not Ethernet.
It would help if Apple used settings like "Extend a network using Ethernet" and "Extend a network using wireless only".....but they don't.
The AirPort Extreme will need to be configured as the main router if you want it to provide a Guest Network. It cannot do this if it is configured in Bridge Mode.

Airport express G not working with new linksys N router

I just swapped a new linksys N router into my old G network and my old airport express is flashing amber and refusing to acknowledge the network. It does not seem to be picking up. What does this mean and how do i fix it? thank you in advance

someone posted this anyone , not sure i actually understand all of it
hours of digging through blogs and Apple help docs, with some luck and trial & error, have gotten it to work. This experience seals the deal...if a Mac can ever run Excel, I'm abandoning my PC.
For the benefit of anyone else in my situation, here's what I did:
You have to override Airport Express's default desire to make itself the hub of a new network, and force it to be added as a client to your own network.
First, plug the Airport Express into the wall, then reset it by holding down the reset button with a paper clip for about ten seconds. Plug in an ethernet cord that's attached to your wireless router.
Open the Airport utility which you should've installed from the cd in the package. It should now recognize your Airport Express and the light will turn green. Be patient...mine took awhile, and even started flashing amber before it worked.
You will need to manually configure the AE from the utility by typing in the name of your wireless network, setting AE to "join an existing network" instead of its default "create new network," and enable Airtunes.
You may need to add the "Airport ID" printed on the case of the unit to your router's MAC list. This allows the router to recognize the device. Type your router's IP address into the address bar of internet explorer to access the router settings.
If you don't see your speakers listed in a box at the bottom of iTunes, you will need to go to the settings window (in iTunes) and click "search for remote speakers connected to Airtunes."
gonna try it out, cause nothing else has worked

Airport Express fails to work with Win Vista

Ive got a 802.11 n airport express.
My girlfriend's laptop with windows vista becomes disconnected with internet every hour. However, It shows in the tool bar that the laptop is connecting to the internet, while the MSN messenger and IE browser fail to connect to internet. She has to disconnect from internet and reconnect. Then it works for a while, then fail again.
Meanwhile, my macbook pro, which is also linked the airport express, works properly. It never failed to connect to the internet.
Can anyone plz tell what is goin' on? How can I solve the problem?

when was the last time the express worked fine?
ok, so hardwired into the 6121, that computer works fine, right? try these exact steps esp the reset
unplug modem and leave off for 5 minutes, while you're waiting plug a eth cord from modem to the WAN (circle icon) port of the express
keep express unplugged and hold in reset button and don't let go
plug power back into express and only release reset when amber light flashes after 10-20s
give it a minute, hopefully you'll now see a green light on the express
fire up airport utility and proceed to 'create a new network' - you may see your device under 'other wifi devices' in the utility or you'll have to manually connect to it by clicking on the wifi icon in the OSX title bar and selecting the reset name of your express (something like express 342sdaf32)

Airport express won't work with Extend Network, only Create Network

My Airport Express when it is setup to extend my network while plugged into Ethernet will Create a network under settings. If I change this to Extend A Network it doesn't work properly. It keeps kicking me on and off WiFi, but the former way works with no foreseen issues. What is going on? I can't extend my guest network with the first option, I don't believe.
I have a 5th Generation AirPort Extreme and a 1st Gen AirPort Express.

My Airport Express when it is setup to extend my network while plugged into Ethernet will Create a network under settings
This is the correct setting to "extend" the network using an Ethernet connection. Technically, this is called a "roaming" network.
If I change this to Extend A Network it doesn't work properly.
This is because "Extend a wireless network" is used only when AirPort devices communicate with each other using wireless only......not Ethernet.
It would help if Apple used settings like "Extend a network using Ethernet" and "Extend a network using wireless only".....but they don't.
The AirPort Extreme will need to be configured as the main router if you want it to provide a Guest Network. It cannot do this if it is configured in Bridge Mode.

Can't get Airport Express A1088 to work with A1264

Hi,
My modem and office are at opposite ends of my home, so I've been using 2 x Airport Express base stations (both A1088) to connect to the internet. One is plugged into the modem via an Ethernet cable, the other is set up in a hallway to extend the range (I just lose the signal if I only use one AX). On Sunday, one A1088 "died" so I bought an A1264 to replace it. I've tried to set them up as a network (following WDS instructions on this site, etc), but no joy. Airport Utilities just won't "see" them. Any tips for set-up or ideas where I might be going wrong? Is there a step-by-step guide anyone can direct me to? Or would I be better off just buying a second A1264?
Thanks in advance for your help.

Consider it purged, John!
I got a survey which I filled in as constructively as possible (largely because I didn't want to get the second guy any grief because I feel he was as helpful as he was able to be.)
I finally sorted out the issue, with one final hiccup ("Join a network" was so branded on my brain from my attempts at THAT ACRONYM that I forgot I needed to use "Extend a network" instead – d'oh!)
Crazy as it sounds, I think one problem is with terminology. If I'd said "802.11n" and/or "802.11b/g" instead of A1264 and A1088, the Applecare guys may have got what I was on about a bit quicker, but surely the customer is going to go by the name on the label (ones that also seem to be used everywhere from this forum to eBay!), so surely it's up to Apple to make certain their staff are aware of model numbers, etc?
I agree with what you're saying about customer service. It's probably not an easy job - I don't think I was rude at any point (at least I hope not), though I may have sounded whiny and stressed, which would have been nothing personal, just frustration with the situation. But there are ways for helpline staff to say, "OK, let's go through this one step at a time…" without getting uppity!

Airport Express/AirTunes Not Working with New Verizon FIOS Connection

I was just set up with the new Verizon FIOS high speed internet, and now my Airport Express/AirTunes will not connect to my remote speakers like it did previously. The option for them is still there on iTunes, however when I select them, I get the horizontal barber pole for a minute, then the speaker selction goes back to computer.
In more detail:
Previously I had a Comcast internet connection which went through a Linksys wireless router. My Mini picked up the internet with this connection. Then I had an Airport Express hooked up to some remote speakers. They worked fine. Now, I have the Verizon wireless router hooked in directly to my Mini through the ethernet cable. I see the wireless network created by the Verizon router. I still see the wireless network created by the Linksys router. However, my iTunes can not connect to my AE/AirTunes speakers.
Note, I did reset the AE and then using Airport Setup Assistant, tried to locate it again, but it came up with nothing (other than my neighbor's new Verizon router).
Any help would be appreciated.
Thanks!

Still no luck. The green light is on for the AE.
Thanks in advance for the help.

Airplay with airport express don't work with iphone

Similar Messages

Maybe you are looking for