AirPlay works with Yamaha RX-A710 equipped with YWA-10 network adapter?
I have a RX-A710 equipped with a YWA-10 network adapter, is it possible to play music from my iPhone or Mac as an input to my receiver, like using AirPlay?
I have got a denon receiver. At some point itunes used to behave properly. But i dont exactly remember when but i started getting the error.
I get the same error even on the latest version of itunes.I am able to airplay to the denon the 1st time. Then once my Denon goes in network standby mode(not power off) and I want to airplay to Denon again i get the error above. However i verified that i can reach the Denon from iphone and even airplay music directly from phone during this whole time.
The only fix i found is to restart itunes. Once itunes starts again i can Airplay to Denon again.
I know this is not a DENON problem or my PC or my network as everything else from PC works properly, everything else AIRPLAY's to DENON properly.
Apple please help.
Similar Messages
-
I can get airplay to work between my Macbook Pro and iPhone 5 at my office but when I'm at home airplay will not work. Does anyone know what may be causing this issue? Thanks!
These are user to user forums. You ARE NOT addressing Apple by posting here.
Also, why are you YELLING at us?? Stop using ALL CAPS.
What steps have you done to try and fix the problem? -
Airplay works with Remote but cuts out for every other App
Remote works perfectly fine but whenever I try another AirPlay app it cuts in and out. Driving me crazy. I have att wifi with an airport express. Any ideas? Why would AirPlay work with Remote but fail with every other app?
Remote does not use AirPlay.
-
Which old iPod with video works on Star Trac gym equipment?
I have a 4th gen U2 iPod (no video) and a 6th gen iPod Classic. My gym has Star Trac equipment with built in iPod docks for video to TV that ONLY have the 30-pin connectors(no composite inputs). Can someone please advise as to which of the older iPods would work so I can watch my video at the gym? Will the 30GB 5th gen, or 30GB 5th gen U2 iPod work? Thanks!
Based on this:
http://www.startracusa.com/ps-107-7-e-ubi-upright-bike.aspx
I would guess that it would work with most any ipod, with the exception of ipod touch and iphone.
Take one of your ipods and plug it in and see what happens. -
Does AirPlay work with AirPort Extreme?
Does AirPlay work with AirPort Extreme?
The AirPort Extreme does allow AirPlay to "pass-through" but it does NOT support receiving AirPlay streams to be played back through powered speakers or an audio receiver as it does not have any built-in audio circuitry like the AirPort Express models.
-
Hello. I've Apple TV 3rd gen and MacBook Pro 2013 all with latest updates. AirPlay works fine till I don't start streaming videos from YouTube. After that AirPlay icon from MacBook menu bar simply disappears. Could some help. I'm using 2 Mbps internet connection.
Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
Playing light, locally hosted steam sidescrollers like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps. -
ITunes Match won't recognize my MBA equipped with a new SSD
Hi,
Here's the situation: I replaced the SSD in my late 2010 MBA to add storage space. Everything went perfectly well and I have been using it for weeks, no problem whatsoever with any of my iCould stuff - calednar entries, contacts etc. as everything was transferred over by making a back-up of the old SSD onto the new one and re-instlaling Mavericks to the new one.
I also have been using iTunes Match for years and love it: ATV, IOS devices are all connected and work perfectly. Until I tried using iTunes Match on the MBA equipped with the new SSD. Note that my iTunes music (not the library file) sits in an external drive connected to my Home network which I don't currentl have access to. That's also teh reason why I signed up for Match: once synced, I didn't have to connect to tht drive and could travel while still having access to all my music.
The library only sees two local songs that were downloaded recenrly after I purchased them on the iTunes Store. I'm still using the same Apple ID nothing changed, but iTunes isn't showing any of my iTunes Match songs in there. I checked Match had been turned on (it is), I checked that I didn't max out on the number of devices (I haven't) and even checked availability of iTunes Match in other countries (temporarily in France), but otherwise residing in the US.
So now, when I try to "add this computer" to iTunes Match, it gives me the following error:
Only one library can be matched at a time. If you continue, the other iTunes Match session will be stopped and this computer's library will be matched instead.
=> Seeing that the "old" library and the "new" one technically come from the same Mac (only now it has a new SSD drive), I'm at a loss and scared to have all of my previously synced/matched songs deleted from itunes Match if I only sync the two local files that were just downloaded/purchased. <=
Would appreciate any help or suggestions please.
Thank you in advance!wandererny wrote:
Only one library can be matched at a time. If you continue, the other iTunes Match session will be stopped and this computer's library will be matched instead.
Hi,
You often get this message when match thinks that you already have a match in progess on another computer.
If you are happy that all your music is on your new hard drive (or if it is only in the cloud), you should select "this computer".
Jim -
I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen. I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine. Any thoughts on how to get this working? Thanks
If your goal is to install and activate CS5 there is no need to install anything preceding it. You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).
-
Report to show the list of Equipment with Attachment.
Hi Experts,
i have attached a file in Equipment Master IE02. Any report can show the list of equipment with attachments?
Please advise.
Thank You
Best RegardsIf you are using IE02, then i think you are using object services - I have never seen a way to view these in an equipment list. You can only view these while looking at the equipment. If you use DMS (tcode CV01N) these will show on IE07 as well as in the notification or work order when you use this equipment.
-
VC : Update Equipment with new configuration number
Hi,
I am trying to update an existing equipment with a new configuration number (cuobj).
I used try to use 'BAPI_EQUI_CHANGE' to achieve this but apparently they didn't work even though i've received no exceptions. (no luck either with EQUIPMENT_MODIFY)
For 'BAPI_EQUI_CHANGE' i used following code :
data : v_equipment like BAPI_ITOB_PARMS-EQUIPMENT,
v_datageneral like BAPI_ITOB,
v_datageneralx like BAPI_ITOBX,
v_dataspec like BAPI_ITOB_EQ_ONLY,
v_dataspecx type BAPI_ITOB_EQ_ONLYX,
return type BAPIRET2.
CALL FUNCTION 'BAPI_EQUI_GETDETAIL'
EXPORTING
EQUIPMENT = v_equipment
IMPORTING
DATA_GENERAL_EXP = v_datageneral
DATA_SPECIFIC_EXP = v_dataspec
return = return.
IF return is initial.
v_dataspec-READ_CUOBJ = newcuobj.
v_dataspecx-READ_CUOBJ = 'X'.
CALL FUNCTION 'BAPI_EQUI_CHANGE'
EXPORTING
EQUIPMENT = v_equipment
DATA_GENERAL = v_datageneral
DATA_GENERALX = v_datageneralx
DATA_SPECIFIC = v_dataspec
DATA_SPECIFICX = v_dataspecx
IMPORTING
RETURN = return.
IF return is initial.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
ENDIF.
thanks for your help.Hi,
Please try this FM EQUIPMENT_UPDATE.
Check program RISTEQ01 for sample code on how to use above FM.
Regards,
Ferry Lianto -
HP Envy Headset jack compatibility with stereo headphones equipped with 3 ring plug
Hello.
As you know, new HP Envy laptops are equipped with just single audio jack (TRRS type). In "Maintenance and Service Guide" this one is mentioned as "Audio-in (mono microphone)/audio out (stereo headphone) combo jack".
So if I connect my stereo headphones that are equipped with 3-pin plug (TRS type) directly to this Combo Headset jack will these get recognized by system as stereo headphones (not as headset)? Can stereo headphones with 3-pin plug cause any damage to laptop hardware if connected?
What is confusing me is that in User Guide one can read following Note:
"Be sure that the device cable has a 4-conductor connector that supports both audio-out (headphone) and audio-in (microphone)".Hi Misuser8,
The manual does support a 4-conductor connector. After some research I have read that the 3 will work with no complications.
I hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Apogee Duet for iOS with Yamaha Motif XF
Hey guys....
I am testing my new app for the iPhone (Neo-Soul Keys) and I happen to just buy the new Apogee Duet for iOS. I have been trying to get my Yamaha Motif XF8 to work with the unit via USB, but it doesn't seem to work through the Apogee Duet iOS, BUT it works flawless when plugged into the iPad or iPhone directly.
See attached image. You can CLEARLY see that the Yamaha Motif XF registeres with iOS and all is working fine, but when I connect my USB MIDI through my Apogee Duet iOS, I get nothing.
Apogee claims that the reason why it doesn't work is because the Yamaha Motif XF is not "USB Compliant." Well even if it isn't, shouldn't the Apogee Duet just pass the MIDI signal through.Nope. To put it bluntly Apple really screwed this up. The opperating system has created serious headaches for musicians and it doen't look like it's going to be fixed anything time soon.
-
IE01 Create Equipment with reference
Hello,
I have an existing equipment with an asset# attached to it.
I then create another equipment (IE01) with reference to that equipment. This will automatically bring in the asset# to my new equipment but I don't want.
So, is there any User-Exit or BADI that I can remove this asset value at the point of saving (IE01) or even before that? I have tried with some User-Exits (IEQM0001, IEQM0002, IEQM0003, IEQM0007) and BADIs (BADI_CCM_FULLY_EQUI, EQUI_UPDATE) but it doesn't work.
Thanks in advance for your help.Radhika,
On Initial Screen IE01 = Equipment Cat
Then In General Screen = Description, and other data optional and required.
Locatin Tab = Main Plant and Location
Organisation = Cost center
Structure = if this equipement is under any other equipment or function location then click on right hand box and mention the fnction location or equipment.
Now you can save.
Riyaj -
Is there a way of working collaboratively on a flex project with a small project group?
Is there a way of working collaboratively on a flex project with a small project group?
I am part of a small group of developers who wish to work on a single flex project together. Is there a way to set up flex so that the project can be developed by multiple people at the same time. I have seen one thread out on the internet about working locally and then uploading to SVn but this is not an option in this case.
Any ideas.
Many thanks in advance
DaveI would say that rushing into development without a source-control system will cost you more in the long-run. If your organisation is serious about developing software it then it needs to invest in the necesary infrastructure, so you should get that process kicked-off as soon as possible.
In the interim you could set-up a source control server on one developer's machine or commandeer a spare machine to use as a temporary source control server. Just make sure you have it backed-up regularly. Or you could use one of the online source control services; many will support private repositories for a small fee. -
My Outlook/iCloud calendar invites to others appear to work on my end and sync with my PC and mobile, but when other people "accept" the invite, it will not populate/add in to their calendar. How can I fix this without turning off iCloud?
I am at a new office that uses Outlook (not Outlook Exchange) which does not sync with my mobile... I just got iCloud set up on my PC to sync my contacts, calendar, reminders, etc... The sync worked (not without flaws, but the other issues seem solvable... I think), so that i can now see all my appointments on both my phone and on my PC. The problem I am having is that iCloud moved all of my calendar items from Outlook into iCloud calendar and now when I send out meeting/calendar invites the recipients may accept them, but the meeting does not get added to their calendar. This is a huge problem and may mean that i need to turn off iCloud.
Does anyone know how to fix this?
Thanks!I am replying to my own post here as I seem to have fixed the problem.
I do have some calendars that are shared. Some of those are shared with users who have time zone support turned on. So i activated time zone support on my iphone, then deleted my icloud subscription. I then signed in to icloud again and voila... problem solved.
It is a weird one as the other calendar views were always fine and when you opened an event that appeared in the wrong day (on list view), the correct date of the event was shown in the information...
one more bug in a complicated system I guess
Maybe you are looking for
-
ITunes 10.5 won't connect to store, can't download songs on IPhone 4
I have an IPhone 4 and tried to download some songs from ITunes on my phone. I received a message that I can't download songs unless I upgrade the iOS. Went to upgrade and received message I had to upgrade to ITunes 10.5. Did this, however now I c
-
Restart RFC Receiver Adapter Channel in XI 3.0
Hi all, I have a problem when the R/3 Backend receiver of the RFC call through XI 3.0 shutdown the weekend. When XI restarts but the R/3 is not up, the RFC adapter (receiver communication Channel of R/3 backend) fails. In the Adapter monitor I can se
-
Change multiple passwords in one operation
Dear all, I'm currently looking for a way to change imap, smtp, caldav and carddav in a single operation instead of having to change each one manually. This is because of our company's password policy, every time a password expires, users usually for
-
oracle.rc.asadapter.weblogic.context.spi.ClusterProvider$1: Cannot establish connection. at oracle.rc.asadapter.weblogic.context.spi.ClusterProvider.listBindingsImpl(ClusterProvider.java:83) at oracle.rc.asadapter.context.spi.AbstractContextProvider.
-
Top 10 Values in Pivot Graph, but not in Report level..
Hi Frnds, We have an urgent requirement in OBIEE 11.1.1.6.6 We have one Count measure column and Supplier column in my report. And now my client wants to show all the records in Table level. But, they want to show only top 10 records in pivot graph.