Airport 2005.001 Update not automatically selected in Software Update Pgm

This post was originally posted in the Tiger Installation and Updates forum. See http://discussions.apple.com/message.jspa?messageID=1403953#1403953
It was suggested that this post be posted in the Airport forum. Perhaps some one knows the answer.
I just upgraded to 10.4.3. It went smoothly! But I needed to fix file permissions after the update using the Disk Utility.
Then I ran software update. Software Update now shows the following updates:
iTunes Phone Driver
Quicktime 7.0.3
iTunes 6.0.1
Airport 2005.001
iPod Updater 2005-11-17
Security Update 2005.009
I never saw the Airport Update and the new Security Update until after I upgraded from 10.4.2 to 10.4.3. (I suspect both are related to 10.4.3).
What is strange is that all the updates are checked when I run Software Update EXCEPT the Airport Update.
Why isn't the Airport 2005.001 update checked like all the other updates? Should I be concerned? Should I manually check this Airport Update and update the software?
Rob

You are correct when you say it is strange that the AirPort update was not automatically check in SU, I also observed this. Just check and go.

Similar Messages

Airport 2005-001 update adversely affecting DHCP on PowerBook?

I have a PowerBook (Alum 1GHz) which after installing the above mentioned airport update has problem obtaining valid DHCP leases from my Airport Extreme or Airport Express base stations.
It works (or doesn't) something like this:
1) open laptop (wake from sleep)
2) airport connects, but network status says it can't obtain an IP.
3) turn airport off and on again (doesn't usually fix it)
4) open network sys pref and click "renew" over and over again until it gets a valid IP address.
It usually takes a while before it works. I can also, alternatively, just wait for 5 min or so and it'll fix itself. But waiting 5 minutes to get a network connection every time i open the laptop isn't really a good option.
Anyone else have this problem? Is there a fix? I think i'll downgrade my airport drivers in the meantime.
.tim
PowerBook G4 12" (6,2) Mac OS X (10.4.4)

FYI: rolling back to the kext files from before the update didn't seem to make the issue go away. Which is very strange since I didn't have the problem before the update.
But i've got no better ideas.

Lens Profile Not Automatically Selecting Anymore...?

Hello all,
I have been using LR3 for a little while and I was excited when the 3.3 update added lens profile support for my last unsupported lens--the newer Tamron 70-300 VC USD. Now, I don't shoot with that lens too much, so I do not have a great number of images since that update, but I SEEM to remember that I tested out a few images and LR3 was correctly choosing lens profile for the 70-300. However, I shot some more images this evening and its not choosing that profile anymore automatically.
I have done some searching on this forums and tried a few of the troubleshooting steps I found. I have tried to install LR3. No effect. I manually chose the 70-300 profile to ensure that it did have an effect on the picture (so the profile is not missing or anything). And, yes, I am shooting in RAW only, no JPEGs.
The issue is just that when I load up any images taken with the Tammy 70-300 (all other lens profiles for all my other lenses are loaded automatically), LR3 just gives me the "unable to locate matching profile automatically"
Any ideas?
Thanks!!
F1Fan

F1Fan2010 wrote:
Please excuse me for beating a dead horse, but I just want to make sure that I understand. If I manually select the correct profile and then save as default, LR3 will associate all new photos with that correction profile automatically? i.e., I wont have to manually select that profile when I load in new pictures? Is that just working by manually telling LR to associate that profile with this particular *likely faulty or messy* EXIF data set?
It will save it as the default for that lens and camera combination.
Fully automatic lens profile selection can only be activated by including a Develop Preset when importing. Fortunately, you need only create one prset a Lr will automatically select the correct profile.

Airport Extreme Card (will not automatically connect to home network)

Running OSX (10.4.7) on a G5 2.0 DualCore. I just had an Airport Extreme Card installed by Apple a week ago. Everything was working fine with WiFi ( I use a Lynksys Router. But oddly now when I cold boot up, the Airport Extreme will not automatically connect to my home network. The little Airport icon on the upper right is always greyed out ( even though clicking on the icon... says that Airport is "On" ). So I now have to manually select my home network everytime I boot up. The first week or so though, I didn't have to do this...it just automtically connected to my home network. I made no changes to the router settings, nor the Network prefs.

I have been able to get my home network running with simultaneous access to the internet with the MacMini and the PB G4 via a WL router (Netgear WGR614v4 with four ethernet ports).
This was the process:
1a) Turned off airport on both computers.
1b) Turned off both compters and
1c) disconnected the router from the cable modem.
a) Disconnected ethernet cable from WL router to Macmini.
2b) Powered down the router for 10 seconds.
3a) Keeping both computers unpowered,repowered router and pressed the reset button (behind an unmarked tiny hole in the back of the router) then re-connected it to cable modem. Waited 30 - 40 seconds until internet service lights flickered green.
3b) Reconnected ethernet cable to MacMini and turned on power for MacMini. No Airport running. With administrator privilege I configured in Syst. Prefs. "Sharing" folder Internet access using "Built in Ethernet" port for computers running "Airport".
4) Turned Airport network on in MacMini and started browser.
Result: Internet connection established.
5a) Powered up PB G4 and then turned Airport on.
5b) In Syst. Prefs. in "Sharing" folder turned Internet Sharing off. But set "Share your connection from Airport" to computers using: Airport with check-mark. (No Built-in Ethernet and no Built-in FireWire!)
5c)Started browser. Result: Internet connection established.
6a) In the Finder window of both computers I clicked on "Go" in toolbar and looked for the name of the other computer, which were listed as alias besides the "Library" and "Servers" aliases. Clicking on the computer alias brought up the 'Networked Globe' and a control button "Connect".
6b) Clicking on "Connect" brought up the mounted drive of the other computer.
Result: Wireless network operational.
PS: I don't dare yet using encryption for the airport network. That's for another day.
Power Book G4, MacMini Mac OS X (10.4.7)

Why does my cursor not automatically select the entire word when I try to select text by starting/ending in the middle of a word?

In any other browser I've used (or word processor, for that matter) when I select text using my mouse cursor, if I start and/or end in the middle of a word, it automatically selects the whole word when I'm selecting more than one word. But for some reason this is not happening in Firefox. If I try to select say 3 words, and I start in the middle of the first word and end in the middle of the last word, it will only select those parts, not all 3 words entirely.

Firefox allows to select part of a word. You can select a word with a double click and use Shift + left click to set the end of the selection, so you need to click at the end of the last word instead of in it.

Does not automatically select default audio playback device

***beware: do not purchase the Lenovo Thinkpad Yoga 14 - it is a lemon through and through***
Hi there - I am back again with a new problem:
The laptop does not play through my external speakers when I plug them in, even when I set the external speakers to as the default.
Sometimes, the sound does not come out of anywhere, at all.
Sometimes, it plays sound just fine.
Always a restart fixes the problem.
However, I would like to not have to RESTART THE COMPUTER every time I want something on it to work.
Anyone know a work around? Thankyou,

Open the Realtek audio control panel, click Device advanced settings, and choose classic instead of multistream.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Can URL in address bar be automatically selected?

I'm slowly transitioning from Windows browsers like IE and Firefox to Safari on the iPad. One of the things that it's taken me a while to get used to is that in Windows browsers when you click or keystroke to the address bar, the URL that was in there is automatically selected. So when you start typing your new URL it automatically writes over the old URL without you having to manually delete it. I see that in Safari the old URL is not automatically selected when you tap the address bar, so if you want to delete what's currently there you have to manually tap the 'X' on the right side of the bar.
Is there a setting somewhere that regulates this behavior? I'd much rather have the default be that the text is automatically selected so I don't have to manually delete it before I type my new URL.

Unfortunately, there is no setting that allows this on the iPad. It doesn't take a lot of time, once you get used to it, though, to do what it takes to accomplish the same result.
1) Tap once on URL bar
2) Tap again and hold for 1 second
3) Tap on "select all"
4) Start typing your URL

HT1338 Software Update is not finding latest release (April 3) of Java 2012 001 Update for Mac OS X Lion 10.7.3 on iMac mid-2007 that downloaded automatically on iMac mid-2011

Software Update is not finding latest release (April 3) of Java 2012 001 Update on my iMac mid-2007, but it downloaded it automatically on my iMac mid-2011 yesterday. Both are running Mac OS X Lion 10.7.3. When I try to download the update manually from Apple on my older iMac, it downloads okay, but when I try to open the dmg file, I get a warning message saying that opening this update may make your computer LESS secure. Do you want to proceed? (I did not).
Why would Software Update find this update and install it automatically on one iMac and not the other, if they are both running the same version of Mac OS X Lion? I checked the installed software list on my old iMac and the Java update does not appear there. Why would this update make my old iMac less secure?

Recall that Java is not installed as part of Lion.
You have to install it (and are asked if you want to) when you first try to run some java stuff.
Is it possible that the iMac 2007 does not have Java yet?
Try this: open Terminal (from Utilities) and type java -version (exactly like that, with the space before the hyphen).
What do you get?
Consistent with this theory is that the dmg thing gave you the warning - installing java might make your machine less secure because java is a means for bad guys to try to do bad things to your computer.
charlie

Rollback Airport update 2005-001

Any way to rollback Airport Update 2005-001 ?
After having problems with 10.4.3, I updated to 10.4.4 with some trepidation, but that worked beautifully.
Then I made the mistake of accepting the Airport update in Software Update. My airport connection to the internet immediately died after that. Can still connect to my base station using ethernet and surf the internet, but once I connect by airport, the wireless connnection to the base station is fine, but I cannot surf using Safari or Firefox, or download mail. Pinging still works, though, strangely enough.
Base station is a Compex NP28G. Ironically Airport Update 2005-001 was supposed to improve compatibility with 3rd party wireless equipment, but it broke my connection !!
(Offshoot from http://discussions.apple.com/thread.jspa?threadID=335344&tstart=0 )

Hi Shih-Tung -
I don't have an answer unfortunately, but I do have the same question, except my system is running 10.3.9 and the airport extreme firmware is version 400.17 (3.90.34.0.p11)
I would appreciate information on rolling back as well - after accidentally applying the "upgrade," my wireless connection is unusable. It can connect, and gets a strong signal, but can't get an ip address. Even setting the ip manually doesn't work. I can connect just fine with ethernet. I have a belkin F5D7230-4 router.
Thanks,
Bree

When ever i click a picture in photo booth it does not automatically update its content is this a bug or i don't know how to do it?

when ever i click a picture in photo booth it does not automatically update its content is this a bug or i don't know how to do it?
whenever you click a picture in photobooth you have to manually insert it one by one in iphoto
i want to know is there any other option in iphoto which can do this type of thing(adding pictures automatically to iphoto )
so that i do not have to do it manually

Once you take the photo with Photo Booth, select the photo in the tray at the bottom and click on the iPhoto button just abouve and to the left:
Click to view full size
That will import the photo into iPhoto automatically. But PB does not import any and all photo taken into iPhoto automatically. That choice is left to the user.
OT

When ever i click a picture in photo booth it does not automatically update its content is this a bug ?

when ever i click a picture in photo booth it does not automatically update its content is this a bug or i don't know how to do it?

Once you take the photo with Photo Booth, select the photo in the tray at the bottom and click on the iPhoto button just abouve and to the left:
Click to view full size
That will import the photo into iPhoto automatically. But PB does not import any and all photo taken into iPhoto automatically. That choice is left to the user.
OT

Automatic Selected Item of List Builder Component Does not work (anymore)

Hi all,
Í'm working with Xcelsius Engage 2008 (version 5.3.2.0) and the automatic selection of an item at runtime of the list builder component does not work anymore. In a previous version it worked very well.
Here's the case: at runtime I want that the list builder component automatically puts the first item in the list to the destination section and selects it, so that a graph can show the underlying pushed data. In the previous version it worked o.k., but now at runtime the destination section remains empty at startup. If I interactively select an item from the source section to the destination section and update the list builder, the data is shown correctly, but it must done automatically, which worked o.k. in an earlier version of Xcelsius 2008...
This are my settings of the list builder component (which was running correctly earlier..):
-at the general tab I defined a range of labels
-at the general tab I defined 2 data column insertion series
-at the behaviour-common tab I defined selected items: position mode; items: the first item of the label list; insert items at runtime
-all of the data comes from an external xml data source
You can find an example of the visualisation at: http://onderzoek2.evinet.nl/projecten/10169/dynarap.htm. You will see that at start-up there is no item visible and selected in the destination section of the list builder....
I've tried every combinations of settings, build up the component from scratch, but its not working (anymore).
Greetings Erik-Jan Vriens

Hi njnits,
Print view button is a standard component of Xcelsius: look at it in the IDE
Exporting to Powerpoint is also a standard functionality, so yes. For this particular dashboard/report all data resides in an external xml-file which have to be accessible for Powerpoint
All visualisations, not only the table, in this/report fetch their data from an external xml-file, but a QaaWS-connection will also do the trick. You will have to write this dedicated service. In our case the xml-data is also generated automatically.
The external data is best defined as a sort of matrix, consisting of approx. 100 columns by 1000 rows. I agree it takes a lot of Xcelsius but it does the job....
Hopes this info helps....

Mail does not automatically update on Mavericks 10.9.1

My Mac Mail does not automatically download after the Mavericks 10.9.1 update on December 16th. I have set preferences to download automatically. It worked fine until recently but now i have to click get mail option to receive emails. It is true for all my accounts (Exchange, Google IMAP, Yahoo IMAP and iCloud IMAP).
Any help is greatly appreciated.

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A folder window will open. Inside it there should be files with names as follows:
Envelope Index
ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Warning: The process may take hours if you have gigantic mailboxes. For reasonable-sized mailboxes, it should only take a few minutes.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

Wireless connections drops after AirPort Extreme 2007-001 Update

Hello, I am getting a lot of wireless connection drops since I installed the AirPort Extreme 2007-001 Update. Anyone has similar issue? Any fix?

Well, I was conneting to the University's wireless server (which is maintained and huge) flawlessly prior to the update. My friend has a macbook pro and didn't apply the update and he has no problem. I installed the update and since then I'm having a hard time connecting to ANY wireless server/router.
I came across the following, looks like a lot of other persons are having the same issue:
http://www.macfixit.com/article.php?story=20070202141024604
http://www.macfixit.com/article.php?story=20070126190822382
Looks like my solution would be to perform an Archive & Install and to not reinstall the AE 2007-001 update.

Office 365 x64 Click-to-Run Not Automatically Updating from Network Share

We are piloting Office 365 x64 and pointing the clients to a network share (see config file below) for updates. When we subsequently download the updates to the share the clients will not automatically install them. If we manually do so from
within an app (File > Account > Update Options > Update Now) it works fine. The ACL and Sharing permissions allow Everyone and Domain Computers read-only access (in addition to some other ancillary accounts). I've tried manually running
the Office Automatic Updates from Task Scheduler and left the box running overnight. I've rebooted, logged back on, closed and opened the app several times. Nothing happens, just always sits at the current version.
Anyone have any ideas?
      Thanks,
         Bryan
Here's the UpdateURL registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\15.0\ClickToRun\Configuration\UpdateUrl = \\<SERVERNAME>\Office_365\Pilot
ProPlusx64.xml:
<Configuration>
<Add OfficeClientEdition="64" >
<Product ID="O365ProPlusRetail">
<Language ID="en-us" />
</Product>
</Add>
<Updates Enabled="TRUE" UpdatePath="\\<SERVERNAME>\Office_365\Pilot\" />
<Display Level="None" AcceptEULA="TRUE" />
<Logging Name="OfficeSetup.txt" Path="%temp%" />
<Property Name="AUTOACTIVATE" Value="1" />
<Property Name="FORCEAPPSHUTDOWN" Value="TRUE" />
</Configuration>
Here's what I think is the log file:
Timestamp Process TID Area Category EventID Level Message Correlation
05/01/2015 11:21:11.061 OFFICECL (0x550) 0x554 Click-To-Run Telemetry aqkhc Medium {"SessionID":"bfe53625-5d12-4e1a-b3b4-2d8e88b0d108","GeoID":"244","Ver":"15.0.4615.1002","ExeVer":"15.0.4615.1002","SecuritySessionId":"0","ModulePath":"C:\Program Files\Microsoft Office 15\ClientX64\OfficeClickToRun.exe","CommandLine":"/service","Bitness":"64","IntegrityLevel":"0x4000"}
05/01/2015 11:21:11.061 OFFICECL (0x550) 0x554 Click-To-Run Telemetry aqkhe Medium {"SessionID":"bfe53625-5d12-4e1a-b3b4-2d8e88b0d108","GeoID":"244","Ver":"15.0.4615.1002","OSVersion":"6.1","SP":"1","ProductType":"1","ProcessorArch":"9","Locale":"1033"}
05/01/2015 11:21:11.061 OFFICECL (0x550) 0x568 Click-To-Run annt7 Medium ProcessPool::Initialize - Initializing Main Process Pool
05/01/2015 11:21:11.061 OFFICECL (0x550) 0x568 Click-To-Run annuf Medium SystemProcessPool::DoInitialize - Initializing System Process Pool
05/01/2015 11:21:11.061 OFFICECL (0x550) 0x568 Click-To-Run anntv Medium ConfigurationManager::Initialize - Initializing ConfigurationManager
05/01/2015 11:21:11.061 OFFICECL (0x550) 0x568 Click-To-Run annt4 Medium Pipeline::Initialize - Initializing pipeline with PipelineServerName: "ClickToRun_Pipeline" and InstallationPath: "C:\Program Files\Microsoft Office 15"
05/01/2015 11:21:11.154 OFFICECL (0x550) 0x568 Click-To-Run annt1 Medium Orchestration::Initialize - Initializing Orchestration
05/01/2015 11:21:11.201 OFFICECL (0x550) 0x568 Click-To-Run annto Medium ApiServer::Initialize - Initializing ApiServer for endpoint: C2RClientAPI_Server_System
05/01/2015 11:24:50.661 OFFICECL (0x550) 0x828 Click-To-Run annty Medium ExecutionContext::QueueScenario - Set executing scenario to UPDATE
05/01/2015 11:24:50.661 OFFICECL (0x550) 0x828 Click-To-Run annuz Medium TaskFactory::TryLoadScenario - Start loading UPDATE scenario
05/01/2015 11:24:50.661 OFFICECL (0x550) 0x828 Click-To-Run annu0 Medium TaskFactory::TryLoadScenario - Loading UPDATE scenario is successful
05/01/2015 11:24:50.676 OFFICECL (0x550) 0x828 Click-To-Run amavh Medium ScenarioController::Initialize - requested display level: False
05/01/2015 11:24:50.676 OFFICECL (0x550) 0x828 Click-To-Run annua Medium ProcessPool::QueueTaskItem - Task SCENARIO:{AC2F0D89-6518-48E9-A0D9-EF039C456034} is being scheduled to run in this process
05/01/2015 11:24:50.676 OFFICECL (0x550) 0x828 Click-To-Run aoicd Medium ExecutionContext::QueueScenario - Successfully queue scenario UPDATE.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf6c Click-To-Run annua Medium ProcessPool::QueueTaskItem - Task UPDATEDETECTION:{77176F9C-873B-4A7D-8051-EBEB52DDE8B0} is being scheduled to run in this process
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf6c Click-To-Run annvj Medium Worker::TaskExecutionThreadProc - Task SCENARIO:{AC2F0D89-6518-48E9-A0D9-EF039C456034} completed with TaskState TASKSTATE_EXECUTING.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf6c Click-To-Run annu6 Medium TaskGroup::DoHandleWorkerCompleteEvent - Task {AC2F0D89-6518-48E9-A0D9-EF039C456034} complete event is handled by task {AC2F0D89-6518-48E9-A0D9-EF039C456034}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf6c Click-To-Run apm4n Medium TaskGroup::Finalize - Task AC2F0D89-6518-48E9-A0D9-EF039C456034 is not finished.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run Telemetry amb0n Medium TaskUpdateDetection::ApplySettings: Beginning Update Scenario. {"SessionID":"bfe53625-5d12-4e1a-b3b4-2d8e88b0d108","GeoID":"244","Ver":"15.0.4615.1002","TargetVersion":"UNDEFINED","InstallID":"C5912794-7300-4A10-840B-575B03DB98F8","TaskId":"77176F9C-873B-4A7D-8051-EBEB52DDE8B0","TaskState":"TASKSTATE_EXECUTING","UpdatePathType":"CUSTOM","TaskType":"UPDATEDETECTION:{77176F9C-873B-4A7D-8051-EBEB52DDE8B0}","Scenario":"UPDATE","TriggeringUI":"UNDEFINED","TaskCaller":"SCHEDULEDTASK"}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run Telemetry aoh6s Medium TaskUpdateDetection::Execute: Ending Update scenario, task trigger source disabled. {"SessionID":"bfe53625-5d12-4e1a-b3b4-2d8e88b0d108","GeoID":"244","Ver":"15.0.4615.1002","InstallID":"C5912794-7300-4A10-840B-575B03DB98F8","TaskState":"TASKSTATE_EXECUTING","TaskId":"77176F9C-873B-4A7D-8051-EBEB52DDE8B0","TaskType":"UPDATEDETECTION:{77176F9C-873B-4A7D-8051-EBEB52DDE8B0}","Scenario":"UPDATE"}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run annvj Medium Worker::TaskExecutionThreadProc - Task UPDATEDETECTION:{77176F9C-873B-4A7D-8051-EBEB52DDE8B0} completed with TaskState TASKSTATE_FAILED.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4b Medium Task::DoHandleWorkerCompleteEvent - Setting Task (77176F9C-873B-4A7D-8051-EBEB52DDE8B0) Task State to (TASKSTATE_FAILED)
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run aqkg7 Medium Task::DoHandleWorkerCompleteEvent - No event is specified for task (77176F9C-873B-4A7D-8051-EBEB52DDE8B0)
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run Telemetry apm4e Medium Task::HandleTaskStateFailed - Handling TaskState (TASKSTATE_FAILED) for task (77176F9C-873B-4A7D-8051-EBEB52DDE8B0). {"SessionID":"bfe53625-5d12-4e1a-b3b4-2d8e88b0d108","GeoID":"244","Ver":"15.0.4615.1002","InstallID":"C5912794-7300-4A10-840B-575B03DB98F8","TaskState":"TASKSTATE_FAILED","TaskId":"77176F9C-873B-4A7D-8051-EBEB52DDE8B0","TaskType":"UPDATEDETECTION:{77176F9C-873B-4A7D-8051-EBEB52DDE8B0}","Scenario":"UPDATE"}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apkpk Monitorable ScenarioController::CheckProcessPool - Failed to get/create ui process pool, and we are not the ui handler. Cannot process event
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run annu6 Medium TaskGroup::DoHandleWorkerCompleteEvent - Task {77176F9C-873B-4A7D-8051-EBEB52DDE8B0} complete event is handled by task {AC2F0D89-6518-48E9-A0D9-EF039C456034}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4p Medium TaskGroup::DoCancel - Attempting to cancel task {AC2F0D89-6518-48E9-A0D9-EF039C456034}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4a Monitorable Task::DoCancel - Can't cancel task (77176F9C-873B-4A7D-8051-EBEB52DDE8B0) because it is in TASKSTATE_FAILED state
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm39 Medium Task::DoCancel - Task (57173191-24E0-42E1-96F4-914AF8CFD1D5) in TASKSTATE_NOTSTARTED, set to Cancelled.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm39 Medium Task::DoCancel - Task (AA63EED2-70B9-4E21-952C-9CFB09EC37C0) in TASKSTATE_NOTSTARTED, set to Cancelled.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4p Medium TaskGroup::DoCancel - Attempting to cancel task {D1506E3F-4B2A-41D3-913B-FA3E889CE20D}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4p Medium TaskGroup::DoCancel - Attempting to cancel task {539BA5C1-BC18-4D11-AF61-CF6EDC58DC33}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm39 Medium Task::DoCancel - Task (D1E1E548-917D-4D75-8AE5-FC76856C66DC) in TASKSTATE_NOTSTARTED, set to Cancelled.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4p Medium TaskGroup::DoCancel - Attempting to cancel task {9A54EEBA-7B8D-4BD5-8EFE-D21E58FFFEE3}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4p Medium TaskGroup::DoCancel - Attempting to cancel task {9C141B7D-2B22-4C33-9C5C-F6F3394AD19E}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4p Medium TaskGroup::DoCancel - Attempting to cancel task {501487AD-0A47-419D-AF30-B9E616A4579B}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4p Medium TaskGroup::DoCancel - Attempting to cancel task {0270BAF9-3CE0-46EE-A3FE-099ABC06BC14}
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm39 Medium Task::DoCancel - Task (F0E5AF5D-5D82-4370-A2A6-C064CBC39247) in TASKSTATE_NOTSTARTED, set to Cancelled.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4o Medium TaskGroup::Finalize - Finalizing task 0270BAF9-3CE0-46EE-A3FE-099ABC06BC14.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4o Medium TaskGroup::Finalize - Finalizing task 501487AD-0A47-419D-AF30-B9E616A4579B.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm39 Medium Task::DoCancel - Task (A5E75ADF-8BF1-44C4-8900-1BE6070EB609) in TASKSTATE_NOTSTARTED, set to Cancelled.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4o Medium TaskGroup::Finalize - Finalizing task 9C141B7D-2B22-4C33-9C5C-F6F3394AD19E.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4o Medium TaskGroup::Finalize - Finalizing task 9A54EEBA-7B8D-4BD5-8EFE-D21E58FFFEE3.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4o Medium TaskGroup::Finalize - Finalizing task 539BA5C1-BC18-4D11-AF61-CF6EDC58DC33.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4o Medium TaskGroup::Finalize - Finalizing task D1506E3F-4B2A-41D3-913B-FA3E889CE20D.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4o Medium TaskGroup::Finalize - Finalizing task AC2F0D89-6518-48E9-A0D9-EF039C456034.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run apm4o Medium TaskGroup::Finalize - Finalizing task AC2F0D89-6518-48E9-A0D9-EF039C456034.
05/01/2015 11:24:50.676 OFFICECL (0x550) 0xf70 Click-To-Run annt0 Medium ExecutionContext::ResetExecutingScenario - Reset executing scenario

Hi,
I replied in the other thread:
http://social.technet.microsoft.com/Forums/office/en-US/e9e6be40-fb92-4734-9f94-9dee5599b1d8/office-365-pro-plus-2013-update-wont-apply-automatically?forum=officeitpro#c156ed8c-f65c-450c-9e0f-85f0de513c20
It seems when the install finished it added an extra Office\Data to the path. My path should be \\hsbswpush02\GPsoftware\o365\Office\Data\15.0.4551.1005
but it shows
\\hsbswpush02\GPsoftware\o365\Office\Data\Office\Data15.0.4551.1005
If I edit the path and delete the extra Office\Data Office 365 ProPlus updates from my network location. I cannot figure out why it is adding the extra Office\Data to the path.
My config file looks like this:
  <Updates Enabled="TRUE" UpdatePath="\\hsbswpush02\GPsoftware\o365\Office\Data" />
have you tried omitting the \Office\Data element, from the Updates element ?
http://technet.microsoft.com/en-us/library/jj219426.aspx#BKMK_UpdatesElement
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Airport 2005.001 Update not automatically selected in Software Update Pgm

Similar Messages

Maybe you are looking for