Airport 802.11ac with FW 7.7.1 not working with iPhone

I bought the new Airport 802.11ac. First I tried to connect with my iPhone 4s. This was only working with no security feature activated on the Airport. From the moment I switch on WPA or WPA2 on the airport my mobile phone is not able to connect. Does somebody know how to solve this issue?

Hi, have you found a solution to this annoying problem? Please help!

Similar Messages

  • I have the airport extreme 802.11ac and I managed to get it working with verizon fios but the upload speed is slow

    The 802.11ac router has a fast download speed, but the upload speed is half what it used to be. Am I doing something wrong?
    I have the router in brigde mode and I have the fios actiontec Rev I router. I am love the router because it is consistent around my house.

    Here is what helped for me. My comcast service stopped connecting. I started by shutting down the modem (sb6121) and the airport extreme ac, taking note of the DNS setting, then after a few minutes connecting.
    I had to do it several times, and then, for some reason, the DNS settings changed, and things have been great ever since (knock on wood). I am not one of the experts on the innards of things around here, but my DNS settings got reset automatically, and the problem went away.
    If it were to happen again, I would repeat the process, and if it persisted, I would change the DNS settings (network-advanced-dns). I could give you the settings that work for me, but I suspect they are really for those in Oregon. Check out your dns settings, write them down, and do a web search for appropriate dns for you.
    Sorry, I don't understand this part of the tech world, but this is what worked for me.
    Hugh

  • Adding 3 Airport Extremes to Linksys WGT4400N in Bridge Mode  Not working

    I have a network that starts in a homerun closet and is expanded across 5 acres to differnet locations via CAT5e.
    Homerun Closet has Linksys WGT4400N with Cat5e running to three different locations on property. The cables are within length limitations.
    1st Airport Extreme N Running in Bridge Mode Connected and Working in Main House
    2nd Airport Extreme N Running in Bridge Mode Connected and Working in Guest House
    3rd Airport Extreme Replaced with new one Connected and Not Working in Office. This Airport Extreme N is configured just like the others but it cannot see the network. Cables Verified with Testers and Mac Pro at office location, works when ethernet cable is directly connected to system.
    Not sure what is going on. IS there s limit to the number of Airport Extreme N's used as bridges?
    I have 2 of ther working and the last is not. First Airport Extreme N for office was bad replaced.
    Thank You
    GldnSabre

    The Netgear wireless server has control over what what devices are allowed to connect.
    Unless you tell the Netgear what devices you want to allow to connect, it will allow any wireless device to connect as long as it knows the wireless network password.
    IF.... .you were using two AirPort Extremes, and not a Netgear, the two Extremes would communicate to each other....so you would only have to enter Timed Access settings on one router and other AirPort would automatically pick those settings up.
    But, even this was not the case until the last year or so when Apple updated firmware.  A few years ago, you might have had 2 Apple AirPort Extremes on the network, but you still had to manually set up Timed Access on both devices separately.
    Bottom line, you need to setup the equivalent of Timed Access on the Netgear router.

  • My apple airport Version 4.2.3 (423.0) is not working now. Can anyone help?

    Hi, Can anyone help me with my apple airport Version 4.2.3 (423.0) which stopped working? My mac book pro 15 inch with MacOSX 10.4.11 is not detecting my apple airport!

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.

  • Spotlight does not work on iphone 6 with ios 8.1.2

    Since a few weeks the spotlight search does not work anymore on my iphone. I tried removing all subjects in the setiings menu and adding them again.

    No, it should work with the iPad. It's not a matter of what version of iOS is on the device.
    The card reader has never been compatible with any iPhone. It is compatible with iPads.
    ~Lyssa

  • HT204065 Group text with one non iPhone not working on iPhone 6 in the group.

    Group text with one non iPhone not working on one iPhone 6 in group. SMS, MMS and iMessage as well as group messaging are all turned on. Has worked intermittently but now cannot see or respond in that particular chain. Can send independently to the non iPhone (Samsung) but not in group. Other iPhone 6 and 5 in group work fine.

    The reason why you have to turn off 3Gs is because T-Mobile does not support iPhones 1700 something or other. You have to turn off the 3Gs on the iPhone to make it work.
    As already provided, it shouldn't matter since the iPhone is designed to automatically connect to the fastest internet connection available. If wi-fi access and 3G network access is on, when in range of an available wi-fi network you have access to and have connected your iPhone with previously, the iPhone will connect to the wi-fi network automatically. When leaving the range of the wi-fi network, the iPhone will connect to the 3G network if 3G network access is available. If 3G network access is not available, the iPhone will connect to EDGE or GPRS - whichever is available at the time.
    If this is unique to T-Mobile's network with the iPhone for some reason since T-Mobile is not an official carrier for the iPhone in the U.S. and you were instructed by T-Mobile to do so, then you need to do so.
    If this is not working now, the problem lies with T-Mobile and I have no idea what to tell them for them to recognize where the problem lies on their end.

  • Charger with serial number A1300 is not working for iPhone 5, is it?

    I have an issue charging my new iPhone 5. I bought an extra cable - and they seem to both work when pluggin it into any computer. But one of my chargers will not work with it - but it works if I plugin my iPhone 4. How come? I noticed that the serial number is A1300. I borrowed one from a friend with serial number A1400 - and that worked (with the same cable).
    can I conclude that chargers with serial numbers A1300 don't work for iPhone 5?

    Any iPhone or iPad charger should work with the iPhone 5.  There is something wrong with your charger.  If it is the one that came with the phone it is covered by the phone's warrantee.

  • Airport 802.11b with Tiger10.4.6

    Can Tiger 10.4.6 be used with a AirportCard 802.11b on a G3 i_Mac (slot).
    imac g3   Mac OS X (10.3.9)   g5

    Just installed (not more than 15 minutes ago) an Airport card on my son's G3 iMac (running 10.4.6 I believe but didn't check) and it works just fine!! It was easy to install. I have my other son's iMac to do yet this weekened and hope it goes as well. Judy

  • Airport wont communicate with iphone or ipod

    We're able to connect to our airport with our lenovo and macbook. But the ipod or iphone 4s won't connect. This just started happening at midnight last night, so about 20 hours ago.
    Any ideas?
    Rebooted the router a couple of times, rebooted phone and ipod, reset to original factory settings for networks on both devices. To no avail. They both see the networks, but when i type in the password they're dismissed.
    Running 7.1 on my iphone 4s

    Hello there, Kareem77.
    The following Knowledge Base article provides some great steps for troubleshooting your issue:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    If the issue persists, the first article also refers to this:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Streaming 3d movies to my Samsung 3DTV using AirPort express and a wireless LAN adapter has not worked.   What is my cheapest option for making this happen?

    I need a transfer rate minimum of 9mbps.  My AirPort express and 3DTV are on different floors, so I cannot directly connect with an ethernet cable.  Can I buy an older AirPort express, use it as a bridge, and connect my TV to it via an ethernet cable?

    Hi rockchalker,
    Thanks for using Apple Support Communities.
    For 802.11n Wi-Fi base stations, creating a roaming network is by far the best choice. This will provide the best throughput between the base stations and your Wi-Fi devices.
    If you are unable to build the recommended Roaming network, then a Wirelessly Extended Network is the next best option.
    For more information on this, take a look at this article:
    Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations
    http://support.apple.com/kb/HT4145
    Hope this helps,
    Mario

  • Trying to use Airport Express (2012) in Hotel and it is not working

    Hey folks, the title pretty much says it all. I picked up a new AE last week, and wanted to use while I travel to share out my hotels wired connection to my computers, iPhone and iPad. I am pretty good with networking, so I can't seem to figure out how to get around the double NAT error that I am getting from the Airport utility. It appears that the hotels network is blocking me from connecting. If I use my back up travel router (Zuni Connect) everything works fine. It appears the AE is not getting along with the hotel. Any ideas on how to get around this?

    I traveled for years with an AirPort Express and have had virtually no problems connecting to the hotel networks if an Ethernet port is provided in the room.
    Up until a few years ago, configuring the Express in Bridge Mode worked just fine, as hotels would allow several devices to connect without problems.
    Unfortunately, hotels have become a lot smarter as they look for ways to generate more revenue. Many hotels now will only allow one connection if the Express is configured in Bridge Mode, so I started using the Express in router mode about 3 years ago to get around this.
    Security wise, this is actually a bettter arrangement as Tesserax notes, because other users at the hotel cannot "see" your devices.
    The Double NAT "error" can be ignored with an option in AirPort Utility if you wish, and the Express will display a nice, green light.
    I have no trouble connecting 3-4 devices this way and the hotel only "sees" one device, so they only charge for one connection.
    When the hotel only has wireless, that is when I bring out the second Express that I travel with, so I can use one Express to "join" the hotel network and provide an Ethernet signal to the second Express, which is configured as a router to allow multiple devices to connect.  The hotel only "sees" one connection this way.

  • Airport express Green light on, itunes transmitting, internet not working

    Hi,
    I have a thinkpad running XP and a cable/telephony modem from comcast. I installed the airport express following the directions and got a blinking amber light and no functioning internet or airtunes. I then took down the IP address, router address, etc (IP Address: 66.30.116.41 Subnet Mask: 255.255.248.0 Default Gateway: 66.30.112.1
    DHCP Server: 68.87.71.8 DNS Servers: 68.87.71.226, 68.87.73.242) from my modem and manually configured those settings into my airport express, and now I have a green light and am able to transmit itunes but can't access the internet. My computer connects to the network but then I can't load any pages. When I try "repair," it fails when reconnecting to the network. The IP adress when I'm connected to AX begins with 10.
    Any suggestions?
    Thanks!
    RCC

    no answer but same problem as yours. any news on your side ?

  • Headset controller not working on iPhone 4 with ios7.04

    Trying to connect a new headset with in-line controller/mic to iPhone 4/ios7.04. Music plays fine but no controls, i.e pause, play, skip etc. Same headset works on my daughter's iPhone 4.  Is this a simple fix, i.e. change settings,  or is there something wrong with my phone?

    it doesnt search and doesnt find any network, when in fact there are networks

  • Wifi sync not working on iPhone 5s with iOS 8.0.2

    I have an iPhone 5s with iOS 8.0.2, and iTunes 12.0.1.26. Sync via wifi doesn't work (with one partial exception[1]). USB sync works fine, but when the phone isn't physically connected via a USB cable, iTunes doesn't know it exists. On the phone, in Settings/iTunes Wi-Fi Sync, "Sync Now" is disabled and it says "Sync will resume when '[my computer name]' is available". It's got the correct computer name.
    In the online help, I find the following claim:
    When the computer and the iOS device are on the same network, the iOS device will appear in iTunes.
    In my case, the computer and the iOS device are on the same network, and the iOS device does not appear in iTunes. I had a previous iPhone 5S which was able to sync via wifi to the same desktop computer on the same network. That one may have been iOS 7 (I can't check because it tried to learn to swim).
    The checkbox in "Summary" is checked:
    I tried unchecking it, applying, checking again, and applying again. I then restarted both iTunes and the phone.
    [1] Partial Exception: I found an "answer" on here where you turn off three different random features on the iPhone, turn them back on, reboot the iPhone and the computer, and then WiFi sync does actually works -- exactly once. Now it's disabled again. All that fussing around was enormously more hassle than just finding a USB cable; if I wanted to spend half an hour performing 10-second tasks I'd have bought another Motorola product.
    Is there a solution that works permanently, or do we just wait for a fix in a future OS revision?

    On your iPhone 4S go to Settings > Wi-Fi. Click on Wi-Fi to both disable and enable it. If you are still unable to enable this setting it may be possible that the iOS7 update did not take properly.

  • Quicktime .mov containers with multiple tracks not working on iPhone

    Hello,
    I have several .mov files (containers) that all include H.264 mp4 video tracks and AAC sound tracks.
    Some of the .mov files only include one video track and one sound track, but some contain multiple, as I have joined a few clips together into one container. Each .mov file was saved as a Standalone file, so no reference files are needed.
    All of them play perfectly in Quicktime and iTunes and all sync with both AppleTV and my iPhone. They also play perfectly in AppleTV, but my iPhone only plays files with a single video and audio track. If the .mov container includes more than one video track, the iPhone will play the first track and then freeze when it should transition to the next track. (Is this a known iPhone bug?)
    My question is: Is there a way to merge video tracks and sound tracks within a .mov container without having to re-encode/export the file to an iPhone format?
    The reason I do not want to export everything to an iPhone format is because I already tried that, and the total size of all the exported .m4v files is around 10 GB but the size of the .mov files is only 5.6 GB, yet I do not see any difference in quality. And my iPhone is only 8 GB, so I can't sync all of the files if I use the iPhone format.
    I've also tried several different settings with iSquint, but the smallest I can get the files down to is 7.4 GB without compromising the quality, and that leaves very little space left on the iPhone.
    Note: The iPhone is a 2G phone with the latest firmware.

    I'm having the exact same issue with my iphone 4s.. I have a belkin wireless router with multiple other devices connecting effortlessly every time. I have my old iphone 3G, and ipod touch, and 2 laptops connecting with no issues. I am receiving the same error message as you. Lame.. If this doesn't resolve itself soon, I am returning the iphone 4s.
    TJ

Maybe you are looking for