Airport Admin Utility for MAC

Where can I find the latest download, the system says I need a later version to be compatible with my new airport extreme

Where can I find the latest download, the system says I need a later version to be compatible with my new airport extreme
Hello Peter Mason1. Welcome to the Apple Discussions!
The new v5.x version of the AirPort Utility comes on the installation CD that came with your new 802.11n AirPort Extreme Base Station (AEBSn).

Similar Messages

How can I get AirPort Admin Utility for Graphite and Snow 4.2.5 to work with OS10.6?

I've upgraded to the latest version of Mac OS and now AirPort Admin Utility for Graphite and Snow 4.2.5 won't run. Any suggestions on how to either run this utility or otherwise get access to my old Snow Dual Airport via another method? Airport Utility doesn't see the device, despite repeated scans. My computer and iPad connect no problem to the device, but both iPod and iPhone won't take and hold an IP address. (If any one can help me solve this issue, I can live without access the Airport.)
Thanks,

I've upgraded to the latest version of Mac OS and now AirPort Admin Utility for Graphite and Snow 4.2.5 won't run. Any suggestions on how to either run this utility or otherwise get access to my old Snow Dual Airport via another method?
Unfortunately, you will need another Mac running a much earlier version of OS X to be able to install AirPort Admin Utility and make any settings chances to the router.
Since the normal life of a wireless router is around 5-6 years of use, now might be the time to consider a new router that will provide far better performance than the older Graphite/Snow AirPort.

Need AirPort Admin Utility for Graphite and Snow

hey there.....any help would be greatly appreciated.....
I ave passed along my graphite base station to my brother in law for his new iMac and it seems he needs the "AirPort Admin Utility for Graphite and Snow" to get it set up. The new "Airport Utility" doesn't seem to recognize it. Is the utility still available for download? I can't seem to find it anywhere?
Another option....is it possible to copy and paste the utility into my iDisk and have him download it from there?? Not sure it that will work??
Again...many thanks for any help anyone can offer!!!!!

AirPort Admin Utility, version 4.2, which works with Graphite and Snow base stations, can be found within the download of AirPort 4.2 (http://www.apple.com/support/downloads/airport42formacosx1033.html).
I tried it on my MacBook running Mac OS X 10.4.10, with a Graphite base station, and it works fine, so far as I can tell.
I did not actually try to install AirPort 4.2 using the installer, because I was afraid of messing with my system when all I wanted was the utility. Here is how to get it:
- Download the disk image AirPortSW42.dmg from the Web page mentioned above. If the installer launches, quit the installer.
- Double-click the disk image to mount a volume named "AirPort 4.2 Update."
- Within the AirPort 4.2 Update window, ctrl-click on "AirPortSW.pkg."
- Select "Show Package Contents."
- Open the "Contents" folder.
- Double-click the "Archive.pax.gz" file, which causes an "Archive.pax" file and an "Archive" folder to be extracted to the desktop.
- Open the "Archive" folder, the "Applications" folder within it, and the "Utilities" folder within that.
- The AirPort Admin Utility is there. You can move it to Applications/Utilities and discard everything else that was downloaded.
Thanks to Tesserax (http://discussions.apple.com/thread.jspa?messageID=5136389&#5136389) for recently explaining how to extract an AirPort utility from a download package.
Although I have never seen "AirPort Admin Utility for Graphite and Snow," it probably was the same thing as AirPort Admin Utility, just renamed.

Where is airport admin utility for lion

There does not seem to be an airport admin utility for airport extreme, I only have the airport utililty that doesn't seem to allow any setup changes. It also does not give options for set up changes when there is no green light for the base station.

Hi - to get the full featured Airport Utility 5.6 for Lion, go to the following link for the download - you can keep 6.1 and 5.6 on your computer.
http://support.apple.com/kb/DL1482
Use it to configure the Extreme when you have problems.
Charlie

Airport Admin Utility for Windows oddity

I have 29 Airport Express Units installed on my campus, configured with no problems using Mac OS. On my other computer, a Dell, I recentily reinstalled everything from scratch (a necessary evil!). I installed the latest "unsupported" version of the Apple Admin Utility for Windows, v3.2.
When I start the utility, I get the Base Station Chooser window, and it shows all 29 stations listed. The second column, however, showing the IP addresses of all the stations, lists 254.128.0.0 as the IP address for ALL 29 stations. The right hand panel shows the correct Name, Description, and MAC addresses of each unit as it is selected in the list, but shows the same incorrect IP address.
If I pick a until to configure, it asks for a password, which I enter, and then fails with a message Error Code: -4. "An error occurred while trying to access the base station. Make sure your network connection is valid and try again."
The units are working fine, and the administration of the units from any of our Macs is also fine.
Has anyone seen this? Any ideas on a fix?
Windows XP Pro

Use version 4.2
http://www.apple.com/support/downloads/airport42forwindows.html

Airport admin utility for Windows anyone???

I lost my cd that came with the Airport, and I really need to get the airport admin utility again. If anyone would like to put this on putfile.com or some other site like that, I would really appreciate it.

AirPort 4.2 for Windows

Airport Admin Utility for Windows 2000

Hi all. I'm running win2000 on a thinkpad, trying to hookup to our airport. My son's laptop and g4 (apple) work fine. I need an Airport Administration utility compatible with win2000 and the GRAPHITE Airport. The Airport Admin Utility 3.2 is NOT compatible with the Graphite colored (original?) model airport

jasonKram, Welcome to the discussion area!
You don't need any AirPort software on your thinkpad to connect to the wireless network provided by the graphite AirPort base station (ABS). You would connect to it just like you would connect to any other 802.11b wireless network.
Be aware that the graphite ABS only supports 64 (aka 40) bit WEP. If this graphite is using WEP, you need to ask your son to use AirPort Admin Utility to find the "equivalent network password". That is what you would enter for the password from Windows 2000.

Which Airport Admin utility for White Base Station

I would like to know which version I need for a Windows XP machine and where I can get this version.
I've spent the last hour online trying to find out and am losing the will to live....
I have an old white base station simply called Airport Base Station (there are 4 sockets on the back of it 1. Phone line 2. WAN ethernet 3. LAN ethernet 4. power supply)
I want to configure it using my Windows machine as my old MAC has died.
Hope someone can help.
Thanks
Geoff

Geoff, welcome to the discussions area.
A model number of the AirPort Extreme would really help us help you here and minimize the chances of providing the wrong information to you.
It's usually on the back or on the bottom of the device. Something like A1034 maybe?
If you can't find the model number, you could take a chance with AirPort Utility 7.4.2 for Windows. No guarantees here, I'm afraid, but it won't take long to try.
Both the Windows Firewall and/or anti-virus software on a PC may try to block the connection from AirPort Utility to your device, so you may need to go into the applications to "allow" the connection or temporarily disable the applications until you can configure the AirPort Extreme.
Message was edited by: Bob Timmons

AirPort Admin Utility for Graphite and Snow

There Any Way to get this working

Apple says it's incompatible or "restricted from opening" (for now):
http://support.apple.com/kb/HT3258

"Confirguration Error" in Airport Admin Utility

When I start up the Airport Admin Utility, an error shows: "Configuration Error: This version of Airport Admin Utility does not support this base station. You can't update the software for this base station...."
My system basics:
Airport Admin Utility v420.31
Airport Extreme (UFO) v4.0.9
I cannot upgrade the Airport firmware due to the above error. I searched in the Apple support site and cannot find the later version of Admin Utility for download.
Please help!!!!

Since I am using Mac OS X10.3.9, I cannot use "Airport Utility".
Actually, I try "Airport Admin Utility for Graphite and Snow" but another error message prompted up. That is :"Airport Admin Utility does not support this base statin. Use Airport Utility, located in the Utility folder...."
So frustrated!!
I try:
Airport Admin Utility --> Failed
Airport Admin Utility v4.25 --> Failed
Airport Utility v5.x --> Failed not support in OS X10.3.9
: (

Non LAN IP address showing up in LAN in Airport Admin Utility

Any help would be greatly appreciated! I have two Airport Expresses, with the second one (for AirTunes only) joined to the existing network of the first one. The strange thing is, the IP address in the Airport Admin Utility for the second one shows up as an ISP IP (ie 134.362.74.141) while the first (base) one shows as 10.0.01. To top it off, I've already factory reset the second one twice now, but I still get the same ISP IP addresses and I can't get its configuration profile to open via the Airport Admin Utility.

If you hold in the reset button while plugging the Express unit into a convenient electrical receptacle, the old profiles will also be eliminated while the factory reset is done.

My Airport Base Station does not appear in the Airport Admin Utility

I cannot see my airport extreme base station in the Airport Admin Utility nor in Airport Setup Assistant via Airport. It worked yesterday but when I was trying to set up a network something must have changed but I don't know what it is. (The setup didn't work so I am only using one base station right now.) The only way I can configure/reconfigure the base station is by physically connecting via an ethernet cable. Then no problem. I have two computers and neither can access the base station with Airport Admin Utility via Airport. I have installed the latest Airport Update but nothing has changed. What happened?

You should be able to use the second Airport Extreme
Base Station as a wireless print server. What I
suggest you do is:
1. run the Airport Admin Utility and clean up
settings on your existing Base Station:
- under the Airport tab, make sure you have not
selected to "create a closed network"
- under the Access Control tab, clear out all
settings
- under the WDS tab, clear out all settings
- under the Network tab, make sure the box is checked
to "Distribute IP addresses" and "Share a single IP
address using DHCP and NAT".
- update settings to the Base Station if you changed
anything.
2. do a hard reset of your second base station per:
http://docs.info.apple.com/article.html?artnum=107451
3. for now, put both base stations and the Mac in the
same room. Run the Airport Setup Assistant, and use
its guidance to configure the second base station as
a new base station that "extends" the wireless
network of your main base station.
That should do it.
Thanks very much. The printer works great from both computers via my second airport base station. And I can see both my base stations in the Airport Admin Utility.

Airtunes missing; no Music tab in Airport Admin Utility - Help!

Hi. Trried to play music via airtunes to AX connected to stereo, but no speaker selections in iTunes! Been working for the past year. Went to airport admin utility (4.2) for the AEBS and when configuring it showed the Music tab for about a second then it went away. I can't select Music re-setup airtunes! Where's the tab? Does the utility have a bug? What to do?
All latest s/w, etc. for AEBS, AX, Pmac, and PB. Tried the utility from both Macs, but same situation. Internet, AEBS, and AX all work fine, but no Music tab in the utility and no airtunes speaker selections in iTunes (6.0.5).
Thanks.

All latest s/w, etc. for AEBS, AX, Pmac, and PB.
Tried the utility from both Macs, but same
situation. Internet, AEBS, and AX all work fine,
but no Music tab in the utility and no airtunes
speaker selections in iTunes (6.0.5).
What firmware is your Airport Express running?
iFelix

Music Tab Disappears from Airport Admin Utility

I have searched these forums and the internet for a long time for a solution to this problem only to find that this is a common problem for a lot of people. Basically, all of the sudden iTunes didn't list my wireless speakers as a possible output for my music. Thinking a setting had been changed or something I logged into the Airport Admin Utility only to find that the "Music" tab was completely removed. I restarted the AE multiple times, performed multiple firmware upgrades/downgrades, and reset the entire device to no avail.
{Post edited by Host.}
Anyways, if you have a solution, please post it here (I know there are other postings but none recent). {Post edited by Host}

Perhaps when you switch it to 5 GHz the signal loss is so great that your Mac Pro can no longer receive the signal.
5 GHz signals do not move through physical objects as well as 2.4 GHz signals.

Can't find AirPort 4.2 for Mac OS X 10.4.x software for Intel Mac Book

I have an Intel Mac Book and recently picked up a graphite AirPort on eBay without software. I installed the Installer updaters and Mac OSX 1.4.9 Combo update. I can not install AirPort software 2.0 - the error says I can not install on this machine. I went on the Apple site to find AirPort 4.2 for Mac OS X 10.4.x and can not locate the download. Any ideas?

Hi Duane!
Thank you for welcoming me and yur information. I now see that I have the software, but I'm still having issues. I can't get the airport to see the internet. It knows there is an internet connection in the Network Assistant, but fails on the diagnostic. Further, after a restart, the Admin Utility does not list the IP address I the window.
I wondered if this was because of the software version update becausse it said it fixes an issue with Comcast (my ISP).
I wanted to use the Admin Utility to configure the Airport from scratch, but how can I if the base station is not in the list?

Airport Admin Utility for MAC

Similar Messages

Maybe you are looking for